Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa27732; 21 Jan 95 3:49 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA20047; Fri, 20 Jan 95 23:40:12 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA20039; Fri, 20 Jan 95 23:40:07 CST Date: Fri, 20 Jan 95 23:40:07 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501210540.AA20039@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #51 TELECOM Digest Fri, 20 Jan 95 23:40:00 CST Volume 15 : Issue 51 Inside This Issue: Editor: Patrick A. Townson Re: Is the Pentium Bug Really That Bugging? (Andrew Laurence) Re: LD ISDN Service (Martin Carroll) Re: Legal Problem Due to Modified Radio (Bill Tighe) Re: Long Distance Caller ID/Cellphones? (Don Skidmore) Re: Format of Telephone Number/Fax Numbers in Germany, France (L. Madison) Re: Long Distance Blocking, was Re: Old Rotary Service Question (J. Galt) Re: Is the Pentium Bug Really That Bugging? (Linc Madison) Re: North Korea Holds US Representative Over $10K Phone Bill (Dan Kahn) Re: Looking up Addresses and Phone Number From Just Names (Linc Madison) Re: Always Busy 800 Number? (bkron@netcom.com) Re: FCC PCS Auction Information (Bob Keller) Re: Cattle Call (Andrew Laurence) Re: Cellular Fraud: How Much of it is Real Money? (Paul Robinson) Re: Cellular Fraud: How Much of it is Real Money? (Larry Schwarcz) Re: Cellular Fraud: How Much of it is Real Money? (Michael P. Deignan) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: laurence@netcom.com (Andrew Laurence) Subject: Re: Is the Pentium Bug Really That Bugging? Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Sat, 21 Jan 1995 02:11:10 GMT clifto@indep1.chi.il.us (Clifton T. Sharp) writes: > In article laurence@netcom.com (Andrew > Laurence) writes: >> The Pentium bug affects only floating-point calculations, not overall >> system performance. Whether you NEED to have it replaced depends on >> what type of work you do. Spreadsheets and mathematical modeling, and > I disagree. Which application do you run on a computer from which you > would accept an incorrect result? If the answer is "all of them", > then you don't need your Pentium replaced. Otherwise ... > Personally, I want a computer at least as consistently accurate as my > $6 pocket calculator. Yes, but unless you perform floating point calculations, you will not RECEIVE incorrect results, so whether they are acceptable or not (of course they aren't) is irrelevant. I do concede, however, that some users may not always be aware of whether they perform floating point calculations or not. Andrew Laurence laurence@netcom.com Certified NetWare Administrator (CNA) Oakland, California, USA CD-ROM Networking Consultant Pacific Standard Time (GMT-8) Phone: (510) 547-6647 Pager: (510) 308-1903 Fax: (510) 547-8002 ------------------------------ Date: Thu, 19 Jan 95 16:33 EST From: Martin Carroll <0006014478@mcimail.com> Subject: Re: LD ISDN Service John Schmerold (john@katy.com) wrote: > At long last, Southwestern Bell is offering ISDN service in St. Louis. > We need to select a LD company, our current carrier LDDS says they > don't offer it. Any recommendations from the crowd? MCI will be more than happy to meet your long distance ISDN needs. MCI offers ubiquitous ISDN PRI service nationwide and ISDN BRI service in connection with the local provider. For more information, contact MCI's local sales office in St. Louis at the numbers below: Joe Rodriguez, Sales Manager 314-342-8568 (3880757@mcimail.com) Jim Brann, Manager Technical Consultant 314-342-7422 (3679735@mcimail.com) In other areas, contact the local MCI sales office listed in your telephone directory. Martin Carroll ** Richardson, TX ** martin_carroll@mcimail.com ------------------------------ From: bill@noller.com (Bill Tighe) Subject: Re: Legal Problem Due to Modified Radio Date: 20 Jan 95 16:39:48 GMT mudaw@uxa.ecn.bgu.edu (David A. Webb @ Educational Computing Network) once wrote: > The reason I have opted to do this on my own is that the radio isn't > worth more than a few hundred bucks. I am pursuing this on the > principal. My radio is legal for me to own, and I am tired of the > harassment from university police. > Please send your comments to me at mudaw@ecom.ecn.bgu.edu. Try contacting the radio manufacturer. They have a large interest in maintaining the legality and saleability of their product. They should have plenty of information to back up your case and perhaps even a lobbyist in Washington to give support. Its people like you who maintain our freedom. Good Luck, Bill Tighe Email: bill@noller.com ------------------------------ From: dskidmo@halcyon.com (Don Skidmore) Subject: Re: Long Distance Caller ID/Cellphones? Date: Fri, 20 Jan 95 17:02:34 PST Organization: The Lone Net-Surfer :-) ! In article , zawada@ncsa.uiuc.edu says: > I had read somewhere that the FCC was going to require carrier (both > LEC and IXC) to pass CPN info back and forth where SS7 was in place. > Sure enough, I dug a little and found that a "Report and Order and > Further Notice of Proposed Rulemaking" was issued with such a requirement. > (URL= http://fcc.gov:70/0/Orders/Common_Carrier/orcc4001.txt.) > However the order doesn't seem to have any effective date and seems a > bit wimpy to me ... My recollection is that the effective date is mid April 1995 - providing the various carriers use any SS7 services--doesn't appear to be any dead-line to start doing so. However, I thought I heard somewhere that most enhanced services were SS7 dependent and that billing data was going SS7 -- is that wrong? > Does the NT DMS-100 (with the proper software of course) support SS7? > I find it hard to believe that there is no SS7 capability for the > DMS-100 ... can someone prove me wrong? If not, a lot of us are going to be out of luck. I am counting on the new rule to improve my experience re your next question -- hope it's not in vain. > How useful is Caller-ID in other parts of the country? Do other folks > that have the service get "OUT OF AREA" for 99.5% of their interstate > calls, or am I just in the wrong city to get that info? I'd be > especially interested to hear how well it works in the Chicago area > since Chicago is also served by Ameritech Illinois. > [TELECOM Digest Editor's Note: Well I can tell you that north of you in > the Chicago area of Ameritech's territory, we have been getting very good > results on Caller-ID for awhile now. Lots of long distance calls are having > their ID shown ... interestingly, even some recent calls from California > in the 415 area code were displayed. Of course all this is relevant to > *where* most of your calls originate, and maybe I just lucked out but I > would say about 90 - 95 percent of my incoming calls now show Caller-ID, > or they show that the caller is blocking it, etc. PAT] I am in the Seattle area. I checked my last 99 calls -- 21 were blocked, 50 were "out of area" and 28 had the calling number or the number and name. This is not particularly great from my perspective. One problem is that GTE serves part of the local calling area, but apparently declines to pass CID to USWest customers. I was hoping the new rules would have a positive influence even though they are about long distance -- hassle factor if nothing else. Can anyone address how the new rules affect cellphone calls? All cellphone calls report "out of area" around here. Presumably this is because the cellphone customer has to pay air charges for all calls. Will they have to pass CID info under the new rules? Don dskidmo@halcyon.com dskidmo@eskimo.com Bellevue, Washington USA ------------------------------ From: lincmad@netcom.com (Linc Madison) Subject: Re: Format of Telephone Number/Fax Numbers in Germany, France, UK Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Sat, 21 Jan 1995 01:04:46 GMT Tom Barrett (tjbarre@srv.PacBell.COM) wrote: > I've been asked about the format of telephone numbers and fax numbers > in the three countries above ... specifically if fax numbers in these > countries have different numbers of digits than a phone number in the > same locale? Telephone numbers in France are always eight digits for the local number, whether it's a voice line or a fax. The UK is in the process of standardizing the length of phone numbers so that all numbers in any given city will have the same number of digits. This is already true in all the major cities (anything with city code 01x1 or 011x), which have seven-digit numbers. In Germany, they still use a "decimal tree" system. For example, the main switchboard at a hotel where I stayed was XXXX1, but you could dial directly to my room phone by calling XXXX375. Most local numbers in this town were six digits. Linc Madison * Oakland, California * LincMad@Netcom.com ------------------------------ From: John_David_Galt@cup.portal.com Subject: Re: Long Distance Blocking, was Re: Old Rotary Service Question Date: Fri, 20 Jan 95 15:36:10 PST This reminds me of a prank I saw done in my college dorm, in the 70s. The two guys in the room next to mine lived about two hours' drive away, and would often go home on the weekends. They also used the phone a lot, and on weekend nights it would ring and ring, so that I and their other neighbors couldn't get much sleep. The dorm had the standard, wall-mounted dial phones. After several months of this, the guys on the far side of these two got fed up. So one night, when they left the room for a minute, we stuck a one inch square chunk of pencil eraser under the offending phone's switch-hook, then hung up the phone. Result: the phone was off-hook but it didn't show. A few minutes later, one of the phone's owners comes back in, tries to make a call, and gets no dial tone and nothing happens. He tries three or four times. Then he proceeds to take the handset and beat the living s__t out of the phone! It was down for about ten days, and guess who got stuck with the bill! John David Galt ------------------------------ From: lincmad@netcom.com (Linc Madison) Subject: Re: Is the Pentium Bug Really That Bugging? Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Fri, 20 Jan 1995 23:40:06 GMT Clifton T. Sharp (clifto@indep1.chi.il.us) wrote: > In article laurence@netcom.com (Andrew > Laurence) writes: >> The Pentium bug affects only floating-point calculations, not overall >> system performance. Whether you NEED to have it replaced depends on >> what type of work you do. Spreadsheets and mathematical modeling, and > I disagree. Which application do you run on a computer from which you > would accept an incorrect result? If the answer is "all of them", > then you don't need your Pentium replaced. Otherwise ... The question is not that simple. Your question should be something more like "which application do you run on a computer *that uses floating point* *and* from which you would accept a result that is only reliable to 0.001?" The worst error in the Pentium floating-point divide is in the fourth decimal place. There are plenty of applications in which that is adequate precision for everyday use. I'm not saying that anyone with a Pentium should consider keeping the defective chip, only that some people don't need to RUSH OUT to get the replacement RIGHT THIS MINUTE. > Personally, I want a computer at least as consistently accurate as my > $6 pocket calculator. My, my. Demanding, aren't we? ( ;-P for the humor-impaired) Linc Madison * Oakland, California * LincMad@Netcom.com ------------------------------ From: kahn@physics.unc.edu (Dan Kahn) Subject: Re: North Korea Holds US Representative Over $10K Phone Bill Date: 20 Jan 1995 23:06:52 GMT Organization: UNC Dept. of Physics and Astronomy > In Jack Anderson's column today, he reports that when Representative > Bill Richardson (D-New Mexico) tried to cross the DMZ (Demilitarized Zone) > between North and South Korea, with the casket carrying the remains of > Chief Warrant Officer David Hilemon, North Korean officials refused to let > him cross until the bill was paid. > In Cash. [stuff deleted] > [TELECOM Digest Editor's Note: They don't need any collection agencies > over there do they? Just keep the people there until they pay their > bills. Remind me not to go visit there anytime soon! I would never get > back home. PAT] Several years ago the Honduran government confiscated the passports of (mostly US) residents of Honduras because they had really big phone bills. The government wanted to be sure they got their money in case the callers had time to leave the country. At least one debtor claimed the calls had been made when she was not at home (or in the country). Some of the calls were international which makes me think that the phone company discovered the fraud themselves but didn't want to take the loss by paying fees for the other end of the connection so they called in the army. Just food for thought the next time you have to contest a long distance call with AT&T or MCI:) dan ------------------------------ From: lincmad@netcom.com (Linc Madison) Subject: Re: Looking up Addresses and Phone Number From Just Names Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Fri, 20 Jan 1995 19:14:43 GMT Tim Bach (timb@europa.com) wrote: > I have a bunch of names I need addresses and phone numbers to. They > are all mostly in the same local calling area. Is there a service or > product I can buy that will allow me to take a ASCII file of names and > have it try and lookup the addresses plus phone numbers? The phone books on CD products I have seen will do this. If you only need to go from name (with or without partial address) to phone number, the entire US fits on a single CD-ROM. Of course, the quality and current- ness of the listings may vary. > [TELECOM Digest Editor's Note: > ...why don't you ask the telco serving the local calling > area for a copy of their directory. Most telcos will send it free of > charge, or they may get some small handling/postage fee. This has been covered somewhat, but to clarify, the policy here in Pac*Bell land is that you get white pages within your LATA for free. If the white pages and yellow pages are in the same book, the yellow pages are free. If the yellow pages are separate, you pay a per-book fee. Thus, the San Francisco YP (2 books) costs twice as much as the Oakland YP (a single book), even though the Oakland YP is almost as large as the combined SF books. As a point of reference, I believe that the only cities in the San Francisco LATA with separate YP's are S.F., Oakland, and San Jose (two books). Of course, all this may change soon with the advances in deregulation, but don't expect the change to favor the consumer in this area. Linc Madison * Oakland, California * LincMad@Netcom.com ------------------------------ From: bkron@netcom.com (BUBEYE!) Subject: Re: Always Busy 800 Number? Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Fri, 20 Jan 1995 06:54:27 GMT > [TELECOM Digest Editor's Note: Here is a good one for you to figure out. > I have two 800 numbers ... well, when I use the phone to dial the 800 > numbers, one of them does in fact go off somewhere, set up the call, > come back to me and give me a call-waiting tone. Obviously it leaves > my switch and returns. That's right. Your line is in the "not able to get call waiting" state and will return the busy signal to anyone who calls until your call, completed or not, leaves your switch. > Now the other 800 number on the other hand is quite a mystery to me > -- how it operates, that is. When I dial it the call goes through > *instantly* as though it were a local call, and if I dial it from the > phone it terminates on, I instantly get a busy signal. That's because this line happens to terminate on a switch that they are also using as a LATA tandem. The translation happens on the same switch. ------------------------------ Date: Fri, 20 Jan 1995 05:33:08 EST From: Bob Keller Subject: Re: FCC PCS Auction Information In an earlier post I gave a pointer to the file: ftp://ftp.clark.net/pub/rjk/pcs_mkts.txt.Z It has come to my attention that the file that was there was an older version that had some sorting errors, glitches, and inaccuracies. It has since been replaced. Anyone who ftp'd the file prior to approximately 5:30 am EST on Jan 20, 1995 should delete the file and get it again. I apologize for any inconvenience this may have caused. Bob Keller (KY3R) Email: rjk@telcomlaw.com Law Office of Robert J. Keller, P.C. Telephone: 301.229.5208 Federal Telecommunications Law Facsimile: 301.229.6875 ------------------------------ From: laurence@netcom.com (Andrew Laurence) Subject: Re: Cattle Call Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Sat, 21 Jan 1995 02:12:24 GMT rice@ttd.teradyne.com (John Rice) writes: > I can't feed my dog for $18/month, which is what I can get pager service > (tone only) for, around here. One page a day is well under most limits > for maximum pages/month. Wow! I get numeric paging, unlimited airtime, for $8.50 per month on a six- month contract. Andrew Laurence laurence@netcom.com Certified NetWare Administrator (CNA) Oakland, California, USA CD-ROM Networking Consultant Pacific Standard Time (GMT-8) Phone: (510) 547-6647 Pager: (510) 308-1903 Fax: (510) 547-8002 ------------------------------ Date: Fri, 20 Jan 1995 15:24:59 EST From: Paul Robinson Organization: Tansin A. Darcos & Company, Silver Spring, MD USA Subject: Re: Cellular Fraud: How Much of it is Real Money? Paul Barnett wrote me in response to my message: > Paul Robinson said: >> I'm going to raise an issue here because I think it relates to the >> issue of why nothing beyond lip service seems to be done by carriers >> about cellular fraud. > I think you made some good points about the impact of cellular fraud, > but I think you missed an important one (I didn't read real carefully, > so the omission may be mine): > Unlike software piracy, cellular bandwidth is a limited commodity. > Every fraudulent call has the opportunity to block a legitimate call > that would have resulted in some additional revenue. I did make that point in part. Additionally, and if a particular system is saturated, then some additional fraudulent unpaid traffic might cause legitimate, paid traffic to not get through. > Furthermore, there is the capital investment required to build and > maintain the facilities to provide the additional increment of bandwidth > used by fraudulent calls, in order to provide a satisfactory level of > service to the legitimate subscribers. Yes, but again, how much of the claimed losses are real chargebacks and out of pocket costs, and how much of it is illusory lost profits (some of which might never have occurred). If someone who can't afford cellular service places fraudulent calls, certainly the cellular company loses revenue and perhaps has out of pocket costs, but those calls would never have been made, so the company would never have received the revenue from it. About the only place where lost revenue might be a valid issue is for people who use fraudulent time, not because they can't afford to use the service, but because they cannot afford to have a particular call tracked to a phone issued in their name, again typically because they are involved in the manufacture and sale of unauthorized dried plant residues, and referred to by police and prosecutors as drug dealers. This was the point I probably should have made: that if the cellular companies were actually getting hit for $1 million a day in settlements, I find it likely that they would have pushed for encryption a long time ago. What the $1 million figure probably represents is imaginary lost profits from unbilled fraud, which is a whole different matter altogether. It means that their overall profit margin is less, it does not mean they are actually *out* any money. And this may be the reason cellular companies have essentially either made customers eat most of the fraud, or barely done anything beyond lip service to stop it. ------------------------------ Subject: Re: Cellular Fraud: How Much of it is Real Money? Date: Fri, 20 Jan 95 16:49:54 -0800 From: Larry Schwarcz Paul Robinson says: > I'm going to raise an issue here because I think it relates to the > issue of why nothing beyond lip service seems to be done by carriers > about cellular fraud. > I got thinking about the issue and wondered: of the industry claimed > more than $1 million a day in fraud that occurs, how much of this is > real money, how much is it lost profits, and how much is sheer > imagination? > And then Patrick Townson says: > [TELECOM Digest Editor's Note: Does it matter, Paul? Does it really > matter? Should stealing someone's 'profits' be any less severe an > offense than stealing their actual cash? You may not be condoning cell- > ular phone fraud, but you sure know how to speak the language of the > phreaks and hackers. Well, I don't know Paul's motives, but, one good reason for asking this is in relation to my cellular bill. It's my understanding that cellular carriers can bill back 100% of their fraud losses to subscribers. So, if joe-hacker steals a MIN/ESN and starts making calls (lets assume all local and no LD carrier is involved), the carrier may claim $100 in losses. That $100 is paid for by all of the other subscribers via higher rates. Now, if, as Paul suggests, those losses are just "paper" losses, the carrier is now ahead by $100 and I'm out a bit by higher rates. So, my interest is in how much higher my rates are due to my cellular carrier inflating their losses. How much lower would my rates be if the carrier could only claim their actual cash (as Paul defined) losses? Keep in mind that I'm in the San Francisco/Bay Area and my rates are: $30/month with 5 free minutes; $0.85/min peak and $0.20/off- peak. So, the carriers out here are making a KILLING to start with! Just my $0.02 worth (+/-), Lawrence R. Schwarcz, Software Design Engr/IND Internet: lrs@cup.hp.com Hewlett Packard Company Direct: (408) 447-2543 19420 Homestead Road MS 43UK Main: (408) 447-2000 Cupertino, CA 95014 Fax: (408) 447-2264 ------------------------------ From: md@pstc3.pstc.brown.edu (Michael P. Deignan) Subject: Re: Cellular Fraud: How Much of it is Real Money? Date: 21 Jan 1995 04:23:36 GMT Organization: Population Studies & Training Center > [TELECOM Digest Editor's Note: Does it matter, Paul? Does it really > matter? Should stealing someone's 'profits' be any less severe an > offense than stealing their actual cash? You may not be condoning cell- > ular phone fraud, but you sure know how to speak the language of the > phreaks and hackers. If I develop a concept or invent a device or > otherwise devise something you could not possibly do on your own, and > then I have the audacity to ask to be paid if you wish to benefit from > my work, how can you say your refusal to pay me is any less wrong than > taking a gun, holding it to my head and demanding my purse? I think Paul raises an interesting point, and I believe that you trivialize it. Nobody denies that cellular fraud happens. I believe, though, that the cellular industry's dollar figures are overinflated, just as the SPA's estimates of software piracy are overinflated, purposely so in a self- serving interest. The key issue is cost versus selling price. The per-minute selling price of a cell call may be, in Paul's case, $.50. But, what is the actual cost of providing that minute to Paul, including depreciation of network infrastructure construction, salaries, software development depreciation, research and development, etc? $.35? Can you really say when a fradulent call is placed that the loss is $.50? Not really. Loss implies that you're depriving the company of something that they otherwise couldn't sell. In a cell call case, its bandwidth. Unless bandwidth is saturated, the "fraudulent" cell call is simply using unoccupied bandwidth that would simply be assigned to a legit call. In this case, the only real "loss" to the carrier is the cost of providing the service (with those depreciated costs, etc.), not the loss of profit from being unable to make a profit by selling that amount of bandwidth. Now, if the network were saturated, and by placing a fradulent cell call you permanently deprived the company of the ability to make a profit off that bandwidth, then you might be able to say the cost of fraud is $.50. I believe that the real reasons industries overstate losses from fraud is to make the problem appear larger than it really is. For example, the recent case of the guy who stole calling card numbers by collecting them through MCI's network software -- they estimated the fraud at what? 25 MILLION dollars? At $1 per minute, that requires 25 million minutes worth of long distance -- or 250,000 people making a 100 minute phone call. Unfortunately, the issue is really techy, and not many people are in a position to question the numbers -- even though, with a little high-school mathematics, running the numbers sometimes makes you stand up and scratch your head with a "wait a minute, something here doesn't juve." And, when people do raise a question, they're critized in the same manner that you address Paul. But, I guess telcos are just honest, trustworthy companies that we shouldn't question at all -- sort of like the attitude we should take with our government too, huh? [TELECOM Digest Editor's Note: I never said the telcos are always honest and I certainly do not believe the government is always honest. But even theives have property rights. You and Paul both bring up the same point about how 'it would not have been sold anyway' ... and while that may or may not be true, my response would be that whether or not it gets sold is my business, not yours. I have some commodity, whatever it is, maybe its capacity on a cellular switch; maybe its a cable television system. I make the statement, 'this is worth X dollars, and that is what you will pay me if you wish to have/use it.' The owner of a product or service is the sole person with the authority to decide what his product or service is 'worth'. If all you and Paul are saying is that people or companies who have things stolen from them occassionally inflate the value of what was stolen for reasons of their own, i.e. insurance payoff, then I would agree with you. Yes, they do that that. If they report what they sold as worth one dollar and what was stolen as worth two dollars (for the same quantity or product, etc) then that is wrong. If they report what was stolen as worth the same amount as that which was sold, then I don't think that is wrong. If you are attempting to trivialize the theft because 'it was not worth as much as they claim' or because 'they would not have sold it anyway' then I contend both those reasons are invalid, simply because what the other person claims is none of your business nor is what he manages to sell or not sell. You cannot trivialize theft based on how out of whack the property owner's ideas about his property's values are with reality. It is still his property. To put it another way, consider a large supermarket in a city like Chicago. Jewel Food Stores tosses a huge amount of perishable stuff out in the dumpster each week when their new stock comes in. Milk with an expiration date only two or three days away. Loaves of bread which have been around awhile or which got banged up and the wrapping slightly sliced open by accident in transit. Entire cartons of eggs where one egg got broken. Boxes of breakfast cereal smashed up in transit. In other words, perfectly good food, but American consumers are picky people. Homeless or other poor people with sophistication or 'street-smarts' know exactly what day, or rather night of the week each Jewel store in the area gets its deliveries and within minutes or maybe an hour what time to go hit those dumpsters and clean them out. Granted, you can't be too picky about variety; you can have a dozen boxes of corn flakes because they threw out the whole carton when the box on top got sliced open accidently by the stock clerk opening the carton, but don't look for any Raisin Bran this week. And in the middle of winter, all those gallon jugs of milk are just fine, but in the middle of the summer if they've been out there in the dumpster more than an hour or so, you don't want them ... otherwise, everything is fine. So since a grocery store is going to toss out all of its perishables when a new order comes in, and since they never manage to sell it all, and since the price tag for the item is probably five times higher than what they paid for it, what real problem is there if someone wants to shoplift a little right from the store? Right? Now substitute cellular carriers and/or telcos and/or software writers. If sneaking something out without paying is cool, then fine. If 'shoplifting' is wrong, then it is wrong. PAT] ------------------------------ End of TELECOM Digest V15 #51 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa29071; 21 Jan 95 9:32 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA23906; Sat, 21 Jan 95 05:34:05 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA23899; Sat, 21 Jan 95 05:34:02 CST Date: Sat, 21 Jan 95 05:34:02 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501211134.AA23899@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #52 TELECOM Digest Sat, 21 Jan 95 05:34:00 CST Volume 15 : Issue 52 Inside This Issue: Editor: Patrick A. Townson DOJ Computer Siezure Guide (Dave Banisar) T1 vs. T3: What's the Difference (Alan Jackson) In the Matter of Callback Services (Paul Robinson) Worldwide Area Code Listing Available via ftp (Paul Robinson) New York A-Carrier Roaming Ban Lifted (Greg Monti) Cellular Phone Information (Lokesh Kalpa) LD Termination Fees to RBOCs (Pete Norloff) Looking for SS7 / CCS7 Spec Information (George E. Cabanas) Looking for Autodialers For Callback (Hadi Fakhoury) Canadian Carrier TelRoute in Receivership (Dave Leibold) American Literature on Multimedia (Toyoaki Kondo) MCI Won't Bill For Calls Already Made to 1-800-CALL-INFO (bkron.netcom.com) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Organization: Electronic Privacy Information Center From: Dave Banisar Date: Fri, 20 Jan 1995 21:08:18 EST Subject: DOJ Computer Siezure Guidel EPIC Analysis of New Justice Department Draft Guidelines on Searching and Seizing Computers Dave Banisar Electronic Privacy Information Center The Electronic Privacy Information Center (EPIC) has obtained the Department of Justice's recently issued draft "Federal Guidelines for Searching and Seizing Computers." EPIC obtained the document under the Freedom of Information Act. The guidelines provide an overview of the law surrounding searches, seizures and uses of computer systems and electronic information in criminal and civil cases. They discuss current law and suggest how it may apply to situations involving computers. The draft guidelines were developed by the Justice Department's Computer Crime Division and an informal group of federal agencies known as the Computer Search and Seizure Working Group. Seizing Computers A major portion of the document deals with the seizure of computers. The draft recommends the use of the "independent component doctrine" to determine if a reason can be articulated to seize each separate piece of hardware. Prosecutors are urged to "seize only those pieces of equipment necessary for basic input/output so that the government can successfully execute the warrant." The guidelines reject the theory that because a device is connected to a target computer, it should be seized, stating that "[i]n an era of increased networking, this kind of approach can lead to absurd results." However, the guidelines also note that computers and accessories are frequently incompatible or booby trapped, thus recommending that equipment generally should be seized to ensure that it will work. They recommend that irrelevant material should be returned quickly. "[O]nce the analyst has examined the computer system and data and decided that some items or information need not be kept, the government should return this property as soon as possible." The guidelines suggest that it may be possible to make exact copies of the information on the storage devices and return the computers and data to the suspects if they sign waivers stating that the copy is an exact replica of the original data. On the issue of warrantless seizure and "no-knock warrants," the guidelines note the ease of destroying data. If a suspect is observed destroying data, a warrantless seizure may occur, provided that a warrant is obtained before an actual search can proceed. For "no-knock" warrants, the guidelines caution that more than the mere fact that the evidence can be easily destroyed is required before such a warrant can be issued. "These problems ... are not, standing alone, sufficient to justify dispensing with the knock-and-announce rule." Searching Computers: Generally, warrants are required for searches of computers unless there is a recognized exception to the warrant requirement. The guidelines recommend that law enforcement agents use utility programs to conduct limited searches for specific information, both because the law prefers warrants that are narrowly tailored and for reasons of economy. "The power of the computer allows analysts to design a limited search in other ways as well ... by specific name, words, places ..." For computer systems used by more than one person, the guidelines state that the consent of one user is enough to authorize a search of the entire system, even if each user has a different directory. However, if users have taken "special steps" to protect their privacy, such as using passwords or encryption, a search warrant is necessary. The guidelines suggest that users do not have an expectation of privacy on commercial services and large mainframe systems because users should know that system operators have the technical ability to read all files on such systems. They recommend that the most prudent course is to obtain a warrant, but suggest that in the absence of a warrant prosecutors should argue that "reasonable users will also expect system administrators to be able to access all data on the system." Employees may also have an expectation of privacy in their computers that would prohibit employers from consenting to police searches. Public employees are protected by the Fourth Amendment and searches of their computers are prohibited except for "non-investigatory, work related intrusions" and "investigatory searches for evidence of suspected work-related employee misfeasance." The guidelines discuss the Privacy Protection Act of 1980, which was successfully used in the Steve Jackson Games case against federal agents. They recommend that "before searching any BBS, agents must carefully consider the restrictions of the PPA." Citing the Jackson case, they leave open the question of whether BBS's by themselves are subject to the PPA and state that "the scope of the PPA has been greatly expanded as a practical consequence of the revolution in information technology -- a result which was probably not envisioned by the Act's drafters." Under several DOJ memos issued in 1993, all applications for warrants under the Privacy Protection Act must be approved by a Deputy Assistant Attorney General of the Criminal Division or the supervising DOJ attorney. For computers that contain private electronic mail protected by the Electronic Communications Privacy Act of 1986, prosecutors are advised to inform the judge that private email may be present and avoid reading communications not covered in the warrant. Under the ECPA, a warrant is required for email on a public system that is stored for less than 180 days. If the mail is stored for more than 180 days, law enforcement agents can obtain it either by using a subpoena (if they inform the target beforehand) or by using a warrant without notice. For computers that contain confidential information, the guidelines recommend that forensic experts minimize their examination of irrelevant files. It may also be possible to appoint a special master to search systems containing privileged information. One important section deals with issues relating to encryption and the Fifth Amendment's protection against self-incrimination. The guidelines caution that a grant of limited immunity may be necessary before investi- gators can compel disclosure of an encryption key from a suspect. This suggestion is significant given recent debates over the Clipper Chip and the possibility of mandatory key escrow. Computer Evidence: The draft guidelines also address issues relating to the use of computerized information as evidence. The guidelines note that "this area may become a new battleground for technical experts." They recognize the unique problems of electronic evidence: "it can be created, altered, stored, copied, and moved with unprecedented ease, which creates both problems and opportunities for advocates." The guidelines discuss scenarios where digital photographs can be easily altered without a trace and the potential use of digital signatures to create electronic seals. They also raise questions about the use of computer generated evidence, such as the results of a search failing to locate an electronic tax return in a computer system. An evaluation of the technical processes used will be necessary: "proponents must be prepared to show that the process is reliable." Experts: The DOJ guidelines recommend that experts be used in all computer seizures and searches -- "when in doubt, rely on experts." They provide a list of experts from within government agencies, such as the Electronic Crimes Special Agent program in the Secret Service (with 12 agents at the time of the writing of the guidelines), the Computer Analysis and Response Team of the FBI, and the seized recovery specialists (SERC) in the IRS. The guidelines reveal that "[m]any companies such as IBM and Data General employ some experts solely to assist various law enforcement agencies on search warrants." Other potential experts include local universities and the victims of crimes themselves, although the guidelines caution that there may be potential problems of bias when victims act as experts. Obtaining a Copy of the Guidelines: EPIC, with the cooperation of the Bureau of National Affairs, is making the guidelines available electronically. The document is available via FTP/Gopher/WAIS/listserv from the EPIC online archive at cpsr.org /cpsr/privacy/epic/fed_computer_siezure_guidelines.txt. A printed version appears in the Bureau of National Affairs publication, Criminal Law Reporter, Vol. 56, No. 12 (December 21 1994). About EPIC: The Electronic Privacy Information Center is a public interest research center in Washington, DC. It was established in 1994 to focus public attention on emerging privacy issues relating to the National Information Infrastructure, such as the Clipper Chip, the Digital Telephony proposal, medical record privacy, and the sale of consumer data. EPIC is sponsored by the Fund for Constitutional Government and Computer Professionals for Social Responsibility. EPIC publishes the EPIC Alert and EPIC Reports, pursues Freedom of Information Act litigation, and conducts policy research on emerging privacy issues. For more information email info@epic.org, or write EPIC, 666 Pennsylvania Ave., S.E., Suite 301, Washington, DC 20003. +1 202 544 9240 (tel), +1 202 547 5482 (fax). The Fund for Constitutional Government is a non-profit organization established in 1974 to protect civil liberties and constitutional rights. Computer Professionals for Social Responsibility is a national membership organization of people concerned about the impact of technology on society. For information contact: cpsr-info@cpsr.org. Tax-deductible contributions to support the work of EPIC should be made payable to the Fund for Constitutional Government. David Banisar (Banisar@epic.org) * 202-544-9240 (tel) Electronic Privacy Information Center * 202-547-5482 (fax) 666 Pennsylvania Ave, SE, Suite 301 * ftp/gopher/wais cpsr.org Washington, DC 20003 * HTTP://epic.digicash.com/epic ------------------------------ From: Alan Jackson Subject: T1 vs. T3: What's the Difference? Date: 20 Jan 1995 18:42:47 GMT Organization: South Coast Computer Services (sccsi.com) What's the difference between the two as far as the user is concerned? ------------------------------ Date: Fri, 20 Jan 1995 13:42:18 EST From: Paul Robinson Organization: Tansin A. Darcos & Company, Silver Spring, MD USA Subject: In the Matter of Callback Services > There ought to be a flag which tells the CO receiving a call if the > call is from within or without the USA, and to reject those calls > which originate in the USA. ("I'm sorry, the number you dialed cannot > be reached from within the USA"). The simplest way would be if the service provider knew what carrier was delivering the call, then they could make arrangements with these carriers to both save them some money and perhaps make some arrangement with them to share the calls coming back. You set up the system so that the carrier sends only a single line from their switch for international calls, and all it has to do is pass down the destination number; they don't even need to supply a voice channel. Calls that come from U.S. Destinations through the carrier are given answer supervision and a message either that the customer is refusing calls from US numbers or that they called an outgoing trunk like. This would then charge the caller the minimum 10c for connecting to the number. Caller ID could be put on the trunk lines; callers that are marked as blocked or local either get a busy signal, an announcement that it's an outgoing only trunk, or just get spiked with an immediate answer and disconnect, causing them to pay for a message unit. If you know which carriers provide overseas service from the countries in question, you can get the major carriers to go along with it in exchange for saving them money since they now no longer pay the 2c termination charge to the local telephone company, and would get outgoing business from the service being generated. But, the point being except where phone rates are still very high, these services aren't of much use because the phone rates for most direct-dial calls have been reduced as a result of the mere existence of arbitrage service resellers. What they would still be good for is bypassing dial restrictions, e.g. from an Arab country to Israel, or other places where direct dial calls are not permitted due to local regulations. And also for making long distance calls that the local authorities have no means to discover the termination number, e.g. a U.S. company without local presence there can tell a southeast asian government to get lost when it demands toll records of someone over there since that government's orders have no validity here, as has been the practice where local banks were typically ordered to provide all credit card transactions of locals. ------------------------------ Date: Fri, 20 Jan 1995 14:00:13 EST From: Paul Robinson Organization: Tansin A. Darcos & Company, Silver Spring, MD USA Subject: Worldwide Area Code Listing Available via FTP I am in the final stages of updating my list of US and international area code, telex code, datagram numbers and country codes. I would like comments from anyone who is interested in the information in the document to take a look and check for any errors or additional related information I could squeeze into this before it is submitted for publication as an Internet RFC to replace my current RFC 1394. I am interested in making sure I have all of the currently proposed new format US area codes as well as any city or province codes of major large international cities. Also of any related information I could have included which is not part of this document. The document's name is: /internet-draft/draft-robinson-newtelex-01.txt It is 154,911 bytes in size. I would like to receive any final comments by February 1. If you cannot FTP you can obtain the document by E-Mail. The FTP sites having the document are: Africa: ftp.is.co.za (196.4.160.2) Europe: nic.nordu.net (192.36.148.17) Pacific Rim: munnari.oz.au (128.250.1.21) US East Coast: ds.internic.net (198.49.45.10) US West Coast: ftp.isi.edu (128.9.0.32) To obtain the document by E-mail, send a message to: In the body (the subject is ignored) type: FILE /internet-drafts/draft-robinson-newtelex-01.txt Thank you for any assistance, and I hope this document will be of use to some people. [TELECOM Digest Editor's Note: International country codes and related files are also available in the Telecom Archives at lcs.mit.edu. PAT] ------------------------------ Date: Fri, 20 Jan 1995 11:56:59 EST From: Greg Monti Subject: New York A-Carrier Roaming Ban Lifted According to a story in the January 20, 1995, issue of {Communications Daily}, Cellular One Baltimore/Washington's ban on automatic roaming (and on billed-to-your-cell-phone roaming) in the New York City area "A" system existed only from November 30 to January 9. This is the first word I have heard that the service is back. The story says that C1-Wash-Balt blocked customer calls from New York "while installing antipiracy equipment." This was mentioned at the bottom of a story noting that New York City police have accused a 28-year-old Uruguayan native of forgery, computer tampering and other charges in cloning of several hundred cellular numbers. Greg Monti, Tech Mgr, FISPO, Distribution Division National Public Radio Phone: +1 202 414-3343 635 Massachusetts Av NW Fax: +1 202 414-3036 Washington, DC 20001-3753 Internet: gmonti@npr.org ------------------------------ From: LOKESH KALRA Subject: Cellular Phone Information Wanted Date: Fri, 20 Jan 1995 12:16:22 EST Hello, Is there a place other than the January 93 issue of {Consumer Reports} (probably quite out of date now) that discusses the Cellular/Mobile phone technology, kinds of plans offered, and the various models and how they are rated? Would appreaciate any info at lk05@cs2.cc.lehigh.edu Regards, Lokesh ------------------------------ From: eyegaz1@ibm.net (Pete Norloff) Subject: LD Termination Fees to RBOCs Date: 20 Jan 1995 17:29:51 GMT Organization: LC Technologies, Inc. Reply-To: eyegaz1@ibm.net I'm looking for some information on the sharing of long distance fees between long distance carriers and the RBOCs. I've found casual references which indicate that the long distance carriers pay the RBOCs approximately 25% each of the fees collected for long distance calls and keep 50% for themselves. This 25% was referred to as something like "line termination charges". It's the payment to the local carrier for connecting one end of the call. I'm hoping to find an authoritative reference to help me in an argument with a Bell Atlantic engineer. This engineer believes that Bell Atlantic is providing the terminating end of long distance calls to the long distance carriers for free. Anyone have any information on this topic? Thanks. ------------------------------ From: gec@panix.com (George E. Cabanas) Subject: Looking For SS7 / CCS7 Spec Information Date: 20 Jan 1995 12:58:36 -0500 Organization: PANIX Public Access Internet and Unix, NYC Hello all, I'm looking for an archive site that has documents detailing the SS7 / CCS7 specs. I'm interested in the control and alarm messages produced. Any information would be greatly appreciated. Thanks, George E. Cabanas gec@panix.com ------------------------------ From: fakhoury@Glue.umd.edu (Hadi Fakhoury) Subject: Looking For Autodialers For Callback Date: 20 Jan 1995 18:20:03 GMT Organization: Project GLUE, University of Maryland, College Park I am looking for autodialers to be used in conjunction with a callback service, for both single line and PBX usage. The dialer in effect renders the service transparent to me. Any information would be appreciated. Please post response or email to HFAKHOURY@MCIMAIL.COM. Thanks, Hadi ------------------------------ Date: Fri, 20 Jan 1995 00:24:00 -0500 From: dleibold@gvc.com (Dave Leibold) Subject: Canadian Carrier TelRoute in Receivership {The Toronto Star}, among other Canadian media outlets, reports that TelRoute Communications, one of the major new competitive Canadian long distance carriers, is in receivership. TelRoute owed $15-16 million to various companies, including Teleglobe, Fonorola, and Bell Canada to which $3.5 million is owed. TelRoute's specialty was to be its microwave network, and there are reported debts with their Toronto-Buffalo link. Last weekend, Bell Canada switched many of TelRoute's 40 000 customers off equal access, mostly to default to Bell (or in one case I'm familiar with, the line was defaulted to Unitel). After some legal wrangling, Bell is to return TelRoute customers default status back to its customers for now. TelRoute will operate for another three weeks while receiver Peat Marwick Thorne attempts to sell the assets, according to reported terms of agreement between Bell and TelRoute. The TelRoute failure, along with the recent bankruptcy of smaller carrier Northquest Ventures (whose assets were sold to Fonorola), marks a definitive beginning of a shake-out in the Canadian long distance industry, where a surprisingly large number of companies took advantage of the 1992 CRTC decision to open long distance competition. ------------------------------ From: tko161@nwu.edu (Toyoaki Kondo) Subject: American Literature on Multimedia Date: Fri, 20 Jan 1995 00:30:17 -0600 Organization: Northwestern University Does anyone know of any good books or information on how technologies, especially multimedia, will change economic activities of consumers and producers, life styles, political participations, culture, perceptions, and international economic relations. I'm doing a comperative study of Japanese literature and American literature on multimedia. I am having a hard time finding American literature. If somebody knows any relevant resource, I would appreciate your help. Thank you, Toyo ------------------------------ From: bkron@netcom.com (BUBEYE!) Subject: MCI Won't Bill For Calls Already Made to 1-800-CALL-INFO Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Fri, 20 Jan 1995 06:57:59 GMT I saw a wire story which said that MCI reached an agreement with 17 states whereby they will not bill customers for calls they have already made to their 1-800-CALL-INFO service. ------------------------------ End of TELECOM Digest V15 #52 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa10563; 21 Jan 95 10:48 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA24598; Sat, 21 Jan 95 06:43:10 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA24591; Sat, 21 Jan 95 06:43:07 CST Date: Sat, 21 Jan 95 06:43:07 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501211243.AA24591@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #53 TELECOM Digest Sat, 21 Jan 95 06:43:00 CST Volume 15 : Issue 53 Inside This Issue: Editor: Patrick A. Townson Mobility Canada Views on 2 GHz Spectrum (Dave Leibold) ATT True Voice Patents (Monty Solomon) Which Countries Have Competition (For FAQ Update)? (Dave Leibold) 800 and Caller ID (Comments) (Glenn Foote) Teleworking Stories (Marc Schaefer) Corporate Creativity, was Re: Cellular Fraud: How Much? (Danny Burstein) Canadian Universal Internet Access (Sarah Holland) Glossary Wanted (S. Cantor) Internet Mail With Half the Address? (Jane McMahon) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Sat, 21 Jan 1995 00:23:00 -0500 From: dleibold@gvc.com (Dave Leibold) Subject: Mobility Canada Views on 2 GHz Spectrum [a news release via CNW - content is Bell Mobility's] MOBILITY CANADA READY TO BUILD THE INFORMATION HIGHWAY OTTAWA, Jan. 16 /CNW/ - Mobility Canada, the country's leading supplier of personal communication services (PCS), today submitted to Industry Canada its position on the federal governments' pending licensing of spectrum at 2 GHz. The 2 GHz spectrum will open up a new realm of personal communications possibilities, bringing Canadians one step closer to accessing the Information Highway. "Canada is on the brink of a new age in personal communications," said Dave Wells, President and Chief Executive Officer, Mobility Canada. "Whether it's using a video phone to call home to the family, or transmitting an X-ray image from an ambulance to a hospital, the 2 GHz spectrum will facilitate the introduction of radical new technology and services that demand considerable bandwidth and are unavailable in today's cellular environment. Essentially, we're going to see a fundamental shift from communication between places, to communication between people, and Mobility Canada is ideally placed to help make that shift happen." Mobility Canada intends to apply for a national license with a minimum capacity of 30 MHz to offer service at 2 GHz so that its growing base of 1.5 million customers across the country can benefit from the range of innovative and complementary services that the additional capability of 2 GHz will make possible. Mobility Canada is also developing a suite of services called Customer First, to ensure that it can meet the changing needs of its customers over time. In preparation for this opportunity Mobility Canada recently launched a comprehensive testing program of potential new PCS technologies -- code Division Multiple Access (CDMA), PCS 1900 and PACS. The trial, which is the only one in the world to include all three major contending technologies, will determine the merits of each and ensure that Mobility Canada can provide the best possible communications solutions. The federal government is scheduled to award licenses for the use of 2 GHz spectrum later this year. If successful, Mobility Canada expects that approximately $1 billion will be invested in developing and implementing new technology and services in the next five years. As a result, up to 1,000 direct new jobs would be created, mostly in the high-skill areas of radio and network engineering and computer software design. A further 2,000 jobs could be created indirectly through an anticipated economic spin-off of up to $2 billion. Mobility Canada recommends that the federal government takes into account the proven track record, business plans and technical and operational abilities of all license applicants, believing preference should be given to those capable of developing and delivering innovative and competent services at this new frequency range. As well, Mobility Canada hopes to see Canadian companies taking the lead in charting this new [news release omitted a line or two here, unfortunately] To date, competition has played a major role in positioning Canada as a world leader in cellular communications. "The provision of PCS at 2 GHz will maintain competition in this emerging telecommunications sector, which is good news for the consumer," said Wells. "And we're confident the federal government will recognize that Mobility Canada is ideally situated to help bring Canadians into the next realm of telecommunications services, and are looking forward to the call for applications." Personal communications services at 2 GHz should offer more than just portable voice communications. While voice will be a key basic service, the spectrum will also enable the transmission of enhanced voice, facsimile data and video services. Some of the possibilities include: mobile medical imaging, mobile video phone, mobile classrooms, virtual field trips, intelligent vehicles and wireless e-mail. PCS will provide a "network of networks" enabling customers to choose services that best meet their individual communications needs. Mobility Canada, a corporation established to deliver quality mobile communications operates Canada's largest cellular and paging networks. Together, Mobility Canada shareholders have invested a record $1.3 billion in wireless technology products and services and directly employ over 3,500 Canadians. For further information: or a copy of Mobility Canada's submission: Suzzanne Ricard (514) 421-4907; Angela Hislop (416) 213-3308. ------------------------------ Date: Sat, 21 Jan 1995 01:53:38 -0500 From: Monty Solomon Subject: ATT True Voice Patents Reply-To: monty@roscom.COM FYI. Date: Fri, 13 Jan 1995 09:57:57 -0500 From: srctran@world.std.com (Gregory Aharonian) To: patents@world.std.com Subject: PATNEWS: Re-examination filed for ATT's True Voice technology 19940113 Re-examination filed for ATT's True Voice patent It seems that someone is filing a reexamination with the Patent Office challenging ATT's patent on its true voice technology. There are a series of files posted to misc.int-property containing documents filed. Here is one of the declarations filed. Should be interesting to see what happens. Greg Aharonian Internet Patent News Service (for subscription info, send 'help' to patents@world.std.com ) (for prior art search services info, send 'prior' to patents@world.std.com ) (for WWW patent searching, try http://sunsite.unc.edu/patents/intropat.html ) ==================== IN THE UNITED STATES PATENT AND TRADEMARK OFFICE In re: U.S. Patent No. 5,195,132 DECLARATION OF LEONARD R. KAHN I, Leonard R. Kahn, declare as follows: 1. I am the President of Kahn Communications, Inc. located at Carle Place, New York. 2. I am the same Leonard R. Kahn who co-authored an article entitled "Enhancement of Telephone Line Performance", which was presented at the National Association of Broadcasters' Engineering Conference held on March 23-26, 1969, in Washington D.C. (hereinafter the NAB article). I am also the same Leonard R. Kahn who is listed as a sole or joint inventor in U.S. Patents Nos. 4,217,661; 3,684,838; and 3,696,298. 3. In addition to the patents set forth in paragraph 2, I am also the sole or joint inventor of over 80 other U.S. patents in the field of electronics and telecommunications. My professional qualifications and achievements are set forth in Attachment A. 4. My above-referenced NAB article was directed to the problem of obtaining high quality speech in the standard telephone network as it was available in 1969. The explicit intention of my 1969 article was to discuss the desirability of restoring, in a telephonic communication system, certain frequencies that were normally attenuated. Specifically, I suggested in my NAB article that the frequencies between 100 Hz and 300 Hz are desirable frequencies to be restored in a telephonic communication system. In the NAB article, I also discussed various devices that could be employed in restoring low frequencies (those between 100 Hz and 300 Hz) in a telephone communication network. 5. Frequencies in the range of between 100 Hz to 300 Hz frequencies are normally attenuated in telephone systems. 6. My NAB article suggested, among other solutions, using an equalizer in a telephone network as a device to accomplish restoration of low frequency speech signals in telephone communication. 7. My NAB article specifically mentions the speech signal associated with a telephone set as the signal to be selectively amplified for more natural speech communication. 8. It was well known, in 1969, when my NAB article was published, that equalization, as referenced in paragraph 6 above, could be accomplished with any of a number of electronic devices known as equalizers or filters. 9. The telephone network was, in 1969, controlled by American Telephone and Telegraph Inc. (AT&T) in a manner which prevented using an equalizer in the straightforward way as suggested in my NAB article. Consequently, it was necessary for me and others to develop complex systems for restoring low frequency signals in the telephone network. 10. The disclosure in U.S Patent No. 5,195,132 relative to the use of an equalizer to restore low frequency speech signals in a telephone network merely reflects the ability of AT&T to arrange their telephone network in accordance with the teaching of my NAB article. In other words, AT&T has modified its network in order to take advantage of the equalizer arrangement suggested in my NAB article. 11. I believe that the disclosure of my NAB article appears to constitute the stated invention in U.S. Patent No. 5,195,132, which provides truer voice transmission of low frequencies. I declare under penalty of perjury, pursuant to the laws of the United States of America, that the foregoing is true and correct. -------------------- John Berryhill 1601 Market St., Suite 720 Philadelphia, PA 19103 ------------------------------ Date: Sat, 21 Jan 1995 00:32:00 -0500 From: dleibold@gvc.com (Dave Leibold) Subject: Which Countries Have Competition (for FAQ Update)? As the FAQ update is under way, one section dealt with the various countries that have introduced telecom competition in some form or other. I've heard of a European Community directive to the effect that its member countries are to open up telecom markets by a given date. Competing local networks are also emerging (including UK, US developments). Information on which countries have introduced, or are about to introduce, competition is welcome, in order to keep the Telecom FAQ comments on this up to date. The current FAQ excerpt on the matter follows: Competition Q: Which countries have competitive long distance service? A: Most countries have a single monopoly telephone company for their local and long distance services. Yet, deregulation of telephone companies and telecommunications in general is a worldwide trend. For better or worse, the international marketplace is demanding more innovation and competition in telecom markets in such areas as electronic mail, fax and data services as well as the long distance, satellite and other network services. The United States has competition in terms of long distance services (i.e. a choice of carriers such as AT&T, MCI, Sprint, Metromedia/ITT, Allnet, ATC). This was established in the early 1980s with the court-ordered dissolution of the Bell System into such pieces as regional local telephone providers, AT&T (long distance) and Bellcore (research, administration of telephone standards, etc.). The UK has a duopoly long distance situation: British Telecom and Mercury can provide long distance services but that could be challenged as other companies wish to provide long distance services. Canada permitted public long distance competition in June 1992. Prior to that, there was limited competition in terms of such things as fax communication services and various long distance/local service resellers, aimed at business interests. Unitel and BCRL/Call-Net were successful in their application to compete. A subsequent appeal of certain aspects of this decision was made by Bell Canada and other existing telephone companies. The result of the appeal was that the decision could stand, and that long distance competition may proceed. New Zealand recently allowed Clear Communications to compete in long distance. Australia now has Optus as a long distance competitor. Japan has competition in international public long distance services. There are initial signs competition in the "local loop", or local exchange services, also. Reports from the UK indicate that there is significant growth in alternative local services, besides the Mercury/BT long distance duopoly (competition of two). Cable companies are touted as alternative local phone companies because of the available capacity on cable feeds, plus the cable industry's conversion to fibre optic and digital technologies. A choice of "dial tone" providers may eventually be available to match the availability of competition in long distance services. ------------------------------ From: glnfoote@freenet.columbus.oh.us (Glenn Foote) Subject: 800 and Caller ID (Comments) Date: 21 Jan 1995 05:23:07 -0500 Organization: The Greater Columbus Freenet > [TELECOM Digest Editor's Note: They are NOT 'paying for the right to > see your phone number'; they are *paying for the phone call*, period. > The person or company or whatever paying for a phone call is entitled > to know where -- to what telephone number -- the connection was extended. > Any 'contract' with telco regards blocking of ID is governed by tariff. > Furthermore, in my phone book where the enhanced custom calling features > are explained in detail, it says plainly 'although you may choose to > block delivery of your number to the telephone you are calling, you may > NOT block delivery on calls to 800 numbers or collect calls.' I would > think that 'contract' is rather plain. So people can be as 'touchy' as > they like -- and I know a few who are -- but that is really their problem. > *They* are the ones who want things both ways at the same time: *you* > pay for my phone call, and *you* don't have any right to know what you > are paying for, because I am a prima-donna about such things. Har har har! > Then start dialing my seven digit number and paying for it yourself, bozo. > Either that, or handle those calls similar to 'blocked number blocking' > with an intercept saying 'the 800 number you have dialed requires your > phone number. Since you wish to not give it, please hang up and dial the > regular number, paying for the call yourself.' PAT] Well, Pat, maybe those who pay for the calls do have a "right" to see the data. But, this "right" does, or at least did, not exist in the tariff for 800 service. And, if it does exist now, you can bet the house, the barn, and the dog, that it is restricted by the words "... where facilities allow". For that matter, only AT&T actually files tariffs with the FCC, the others "publish rates" by choice, not by requirement. Even for AT&T this may end soon. The other companies, who started giving out the calling telephone number, did so (and probably continue) for "marketing" reasons. The "contract(s)" at the local level are different depending on the state and the local telephone company. Also, some (many) phone companies have no provisions for making the tariffs available to the public. For example, although the various PUC's usually require copies of the tariff to be available in "public offices", there is no provision that the Telco must actually have a "public office". So some (many?) the Telco's just did away with "public offices", in favor of "service locations". Everything else is just the same, except no tariff availability. Therefore, if access to the tariff is restricted, by design of the Telcos, the "public" must rely on the assertions of the Telco. Neat, for the Telcos; for the public, it's a problem, and not just in the area of Caller ID. In response to your question/comment: "Are you suggesting because I get this information I 'paid to get your number'? All I paid for was the phone call, which legally means the call *belongs to me*, and I am entitled to know the uses made of my phone when I am charged for those uses. Yes, I am stating that you get this information because you paid to get it. (Incidently, the "you" here refers to anyone who is using a 800 number and gets the caller data, not you personally, Pat.). This data has been made a large part of the marketing effort, and the aftermarket IS software and hardware product area for some time. To claim that you are not paying for the data, as an integral part of the call, is naive. For some time, there was, and still may be, an extra charge for this data when small companies (light traffic) are/is involved. I can point to major companies who have switched carriers just to get this data when it was not available from AT&T. As to "who owns a telephone call", the various courts are in disagreement on that issue as we speak. It may be that a call is "owned" by both parties. There is a lot of history that supports that contention. About "entitled to know": Yes, you are! The right, and ability, to audit Telco bills was a hard won battle. I would be among the first to fight against giving up that right or ability. However, the ability to audit the bill is not as important as the individual privacy/security right of the consumer, nor are they incompatible. The existing technology is more than adequate to provide both. It is very easy to say "pay for it yourself, bozo.". Speaking for myself, and my clients, and I think many others as well, (none of whom are "prima-donnas") paying for it is NOT a problem. Unfortunately, many companies do not allow calls except to 800 numbers, and/or will only "give out" 800 numbers. Increasingly, the reasons for this seem to be the intent to penetrate the privacy/security of the caller, while "hiding" behind a 800 number front which itself cannot be readily identified as to location, company, or purpose. At the risk of repeating myself, It will be interesting to see what will happen when (not, I expect if) this challenge takes place ... makes me kind of glad I retired from the Consulting business ... ;-). Glenn L Foote glnfoote@freenet.columbus.oh.us ------------------------------ Date: Sat, 21 Jan 95 07:25 MET From: schaefer@alphanet.ch (Marc SCHAEFER) Subject: Teleworking Stories Organization: ALPHANET NF - Research and information - Not for profit Hi, Do you happen to know a teleworking story? Especially in the aspect of worker-firm interaction/conflicts. Do you know about court cases (featuring piracy, privacy/non privacy of mails in commercial environment, snooping of mails from employees, successful examples, etc). This would be for a thesis. Thank you! ------------------------------ From: dannyb@panix.com (danny burstein) Subject: Corporate Creativity, was Re: Cellular Fraud: How Much is Real? Date: 21 Jan 1995 01:43:59 -0500 [Summary until now: The points raised basically question how much of the claimed cellular phone losses to fraud are "real" versus fiction. i.e., when they claim $20 million in losses, is that actual cost to them, or is based on, say, 20 million minutes at their full retail price of $1/minute]. This overstating of losses is common by Big Business, and by numerous other groups, for the following reasons: a) It gets a lot more publicity; b) It can be used to justify rate increases; c) It can boost insurance payments; d) It can reduce taxes. Let's take a couple or so examples, not necessarily telecom: Police grab 100 pounds of cocaine. Well, umm, maybe they grabbed a bit more, but they show off 100 pounds. They state: "This was worth $1,000/pound on the street, so we just kicked ORGANIZED CRIME for one hundred thousand dollars." However, the actual and replacement cost to the Bad Guys is only $25 plus shipping and handling ... but that wouldn't be newsworthy. Or, let's say you are Mega-tele-sleaze, Inc. You're about to make $100 million in profits. But the IRS will take $50 million of it. So what do you do? Well, for starters, you give $100,000 to the local "take-a-buck political club", but in addition, you tell your accountants to come up with "losses" to offset your profits. Aha!, they say. Let's see ... hmm, there were 10 million minutes of FAKE CALLS!. So we can claim $10 million in losses. Poof, there go $5 million in IRS payments! Or even better ... These calls "would have been" at the Roaming Rate of $5/minute. Wow!. (It's not quite that simple to claim tax losses, but at these figures, it's worth having the tax lawyers work out creative charts). BTW, if I might give an analogy that shows how absurd this can become: Let's say you're a former felon who was given a pardon by an "uindicted co-conspirator", and, in addition to owning a shipyard, you're also the principal shareholder of a major league baseball (remember them?) franchise. You sell tickets to your stadium at $25-$1,000 dollars (depending on location). Lo and behold your security staff finds a dozen kids climbing a tree and watching the game from the outside. You've just had a $1,200 loss ... And, since your payments to the City are based on your profits ... (Now Corporate America would never use logic like that, would they???) dannyb@panix.com (or dburstein@mcimail.com) ------------------------------ Date: 21 Jan 95 02:51:54 EST From: Sarah Holland <70620.1425@compuserve.com> Subject: Canadian Universal Internet Access My last message to TELECOM Digest was about how SaskTel was offering universal Internet access, and BC Tel was reported as saying that it wouldn't. I'd like to take credit for their change of heart ... {Vancouver Sun}, January 20, 1995, Bits & Bytes Column Canadian phone companies are joining forces to offer access to the Internet from anywhere in the country, especially rural areas. [Sarah's comment -- yippee!!] Executives from the Stentor alliance, which includes BC Tel, are working on a plan to allow Canada's estimated one million Internet users to dial into the computer network from anywhere in Canada without having to phone long distance. *** Sarah Holland 70620.1425@compuserve.com Fort St. James, BC, Canada - "Historic Capital of New Caledonia" [TELECOM Digest Editor's Note: Good for you! I hope the connection gets turned on soon, and it works out well for everyone. PAT] ------------------------------ From: scantor@tiac.net (S Cantor) Subject: Glossary Wanted Date: Fri, 20 Jan 1995 09:11:14 -0500 Organization: The Internet Access Company I'm looking for a good laymen's type glossary of common data communications and telecommunications terms. E.g. how would you define "internetworking"? How would you describe "physical plant" to non-techie? Any suggestions? Is the FAQ of this sort floating around? [TELECOM Digest Editor's Note: Yes it is. The Telecom Archives has several glossary files available. There are various ways to access them. You can use anonymous ftp lcs.mit.edu. When connected, 'cd telecom-archives' and then 'cd glossaries'. The glossary files can also be searched interactively using the Telecom Archives Email Information Service. To do this you send mail to the Archives (tel-archives@lcs.mit.edu) in the usual way -- see the help file for assistance), using the command GLOSSARY where the argument is the word or phrase or abbreviation being searched. You will receive back in email the appropriate excerpts from the various files. PAT] ------------------------------ Date: Sat, 21 Jan 1995 09:06:00 +1000 From: /I=C/G=JANE/S=MCMAHON/O=DEMO.SALES.NSW/@telememo.au Subject: Internet Mail With Half the Address? Pat, I know this looks like a lonely hearts type message, but the answers might be interesting to other readers. Thanks for your help. Here goes: How do find someone using Internet? Is it possible to send a mail message to someone knowing only half their Internet address? I'm trying to track down a Jesuit priest by the name of Bill Roach (broach@ I assume), who's last known physical address was a Jesuit seminary in Menlo Park California. Is there a directory of addresses or some way to get a message to all the "broach"s on the Internet? I've tried American telephone directory assistance - no luck. Couldn't even find Menlo Park. Excuse my ignorance - We Australians are reasonably new at this Internet stuff -- bloody crocs keep chewing up the phone lines! Thanks in anticipation. [TELECOM Digest Editor's Note: Perhaps it is about time for someone to write an article describing the Internet 'white pages' and how to use them. I think searching those would be a good way for you to start. PAT] ------------------------------ End of TELECOM Digest V15 #53 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa11962; 21 Jan 95 11:08 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA25244; Sat, 21 Jan 95 07:27:05 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA25237; Sat, 21 Jan 95 07:27:03 CST Date: Sat, 21 Jan 95 07:27:03 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501211327.AA25237@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #54 TELECOM Digest Sat, 21 Jan 95 07:27:00 CST Volume 15 : Issue 54 Inside This Issue: Editor: Patrick A. Townson Pending ATT Videoconferencing Patent With C++ Source Code (Greg Aharonian) Programmable Touch-Tone Interpreter Needed (Paul Robinson) Re: CallerID and ANI (Scott Falke) Re: Cellular Fraud: How Much of it is Real Money? (Michael D. Sullivan) Re: Attention: 800 Number Subscribers (News Alert) (Bob Goudreau) Re: Looking For TDM Box (Paul A. Lee) 800-MY-ANI-IS and Car Phone Redialers (Tom Ward) Cellular Exchanges Wanted (Tom Ward) Re: Can Caller ID Information Be Faked? (Chris Telesca) Re: Where to Get Text of the ECPA? (Wilson Mohr) Where: T1 Information/FAQ? (bruce268@delphi.com) Re: ISDN in Florida (bh0386@aol.com) Telephony Card/Software Needed (Paul Garfield) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: srctran@world.std.com (Gregory Aharonian) Subject: Pending ATT Videoconferencing Patent With C++ Source Code Organization: The World Public Access UNIX, Brookline, MA Date: Fri, 20 Jan 1995 18:40:11 GMT 19941019 ATT Videoconferencing patent with C++ source code ATT has a patent pending at the US Patent and Trademark Office dealing with multimedia conferencing. While not overly notable for novel ideas, it does list 12,000 lines of C++ source code, if you are interested in learning more about how ATT does software. The patent is titled "Multimedia Communications Network" and filed April 1993. The abstract starts: "A circuit configuration in a multimedia network simulates an actual meeting room where the conferences between two or more people may be held." To order a copy of the patent application, contact your local supplier of patent hardcopy and ask for PCT application WO 94/24807 filed on April 15,1994. Of interest to telecommunications investors is which countries ATT designated that it might be filing national applications (PCT applications only protect your filing date and is not a standalone patent application). ATT lists most but not all of the European/EPO countries (United Kingdom, France, Germany, Switzerland, Spain, Italy, Netherlands and Sweden), Japan, Canada, Australia, Brazil, China, Korea and New Zealand. I guess that is where all of the telecom money is at. Greg Aharonian Internet Patent News Service (for subscription info, send 'help' to patents@world.std.com ) (for prior art search services info, send 'prior' to patents@world.std.com ) (for WWW patent searching, try http://sunsite.unc.edu/patents/intropat.html ) ------------------------------ Date: Fri, 20 Jan 1995 14:17:14 EST From: Paul Robinson Organization: Tansin A. Darcos & Company, Silver Spring, MD USA Subject: Programmable Touch-Tone Interpreter Needed Jeffrey A. Porten , writes: > a client.. wants to provide her incoming callers with a automated > system that will allow them to schedule time with her by using a > touch-tone phone Sounds like what she wants is an automated scheduling system. > I just attended the Consumer Electronics Show, and was very > disappointed with the selection there; most vendors basically said, > "can't be done" or "I'll do it if you order 10,000 units." Eh? I wonder if he has a license to spread cow manure, because he's doing a pretty good job. The gonoph should have his license lifted. > Anyone with suggestions on how to do this? Proposals from vendors > also cheerfully accepted. I can supply a product to do this, including the computer to run it on, for about $500. If the customer has an extra 286 they're not using, then the price would be less. This isn't rocket science, it's mainly getting the parts and putting together the stuff to do what is desired. You can give me a call at 1-800-TDARCOS if you're interested. ------------------------------ Date: Fri, 20 Jan 95 21:45:17 -0800 From: scott@csustan.csustan.edu (Scott Falke) Subject: Re: CallerID and ANI Organization: CSU Stanislaus In article barrus@merl.com writes: > My wife sometimes returns calls to mental health patients when they > phone an emergency number. When CallerID was started in our area, we > called and specifically asked to have line blocking put on our line > (we have to press something like *67 to turn on CallerID on outgoing > Two evenings ago, I called PC Connection from our phone and casually > asked if our number had come through when the customer assistant > answered our phone. He then proceeded to recite our phone number to > me. I did not (and never have) dialed the code to turn on CallerID. At least PCConnx honestly advertises this feature. They *will* disable the link to your account at your request. Other 800 sleazeball outfits take the oppposite appraoch and *lie* about it, even when directly questioned. I was charged 6-bucks+ using a flip-phone in rural Idaho once. Knowing ANI was linked to US-Whores roamer custserv 800 number, I *still* called 'em up and suggested a new name that more accurately described their true corporate motives; i.e.; the rep heard the term "Total Bastard Cellular" from my lips in a most close-up and personal manner. scott@csustan.csustan.edu ------------------------------ From: mds@access.digex.net (Michael D. Sullivan) Subject: Re: Cellular Fraud: How Much of it is Real Money? Date: 21 Jan 1995 01:10:07 -0500 Organization: Wilkinson, Barker, Knauer & Quinn (Washington, DC, USA) Paul Robinson writes: > I'm going to raise an issue here because I think it relates to the > issue of why nothing beyond lip service seems to be done by carriers > about cellular fraud. > Let me explain that I'm not condoning the idea of cellular fraud, what > I want to do is discover exactly where the numbers for the amount is > coming from and what relationship to reality those numbers represent. > I remember reading some seven years ago an article which someone had > gotten permission to reprint out of a magazine that stated that > because the ESN and MIN pairs are sent in clear the possibility for > fraud was virtually unlimited. > I got thinking about the issue and wondered: of the industry claimed > more than $1 million a day in fraud that occurs, how much of this is > real money, how much is it lost profits, and how much is sheer > imagination? When a phone is cloned, it is typically used not by Joe Devious to call his office, family, and friends, or to call other mobiles. It is typically used for a day or two by a criminal enterprise to sell long-distance calls, and particularly international calls. The phone gets used for a few days or even hours to sell immigrants the ability to call home in India, Taiwan, Somalia, etc. for say $10 for 10-15 minutes. The airtime costs involved are minimal compared with the long-distance charges. The call-shop operator pockets the cash, then either trashes the phone or re-clones it to a different number. The cellular system incurs actual cash losses equal to the long-distance charges; this may be picked up by the home system, if the cloned number is from a roamer. Whether the serving system or the home system pays, the cellular industry loses big-time cash. Even if a cloned phone is used for local landline calls, there are big losses. If the cloned number is a roamer, the home system picks up losses for the airtime and local connection charge. Many cellular systems charge both per-minute rates for airtime and a local landline charge of 10 cents or so to cover landline interconnection. Whether there's a markup in these or not, the home system that has to pay is socked big-time. Plus there is the cost of doing the roamer verification and record transfer. Roamer verification database administration is expensive; that's why there is typically a premium price paid to roam. These are actual cash losses. The only time there are not actual cash losses is when the cloned phone is used to call only mobile numbers in the same area and neither the cloned number nor the called number is a roamer. It's pretty unlikely that this is a significant proportion of cellular fraud. If a local phone is cloned and only local calls are made, the cellular operator is out of pocket for local interconnection costs and operational overhead costs. If one assumes, as some have asserted, that cellular companies have a 40% profit ratio, then their out-of-pocket costs are 60% of the charges. Think of it this way: If someone broke into your home or tapped into your phone line and made $2000 of calls, your loss would be $2000. If the phone company decided to eat that cost, its loss would be $2000. If the long-distance company decided to eat that cost, its loss would be $2000. Stealing $2000 in phone calls results in $2000 in losses. The same facilities are used to make fraudulent calls as would be used for legitimate calls. The costs are the same, the profits are the same; if the bill isn't paid, those costs are lost and so are the profits. It's not quite the same as software copying, where there are no direct costs to the software company if a kid copies his dad's Autocad. Michael D. Sullivan | INTERNET E-MAIL TO: mds@access.digex.net Bethesda, Md., USA | also avogadro@well.com, 74160.1134@compuserve.com ------------------------------ Date: Fri, 20 Jan 1995 14:30:13 -0500 From: goudreau@dg-rtp.dg.com (Bob Goudreau) Subject: Re: Attention: 800 Number Subscribers (News Alert) producer@pipeline.com (Judith Oppenheimer) writes: > Remember, too, that international freephone numbers will *co-exist* > with domestic toll-free numbers in the U.S.. > So there will be 1 800 FLOWERS, and 011 800 FLOWERS, both of which can > be called and advertised within the United States, but which may reach > competing companies! This seems to imply that the +800 country code will contain numbers with only seven digits, yielding a total of no more than ten million international free-phone numbers for the entire world! Given that the North American Numbering Plan alone is already close to running out of seven-digit intra-NANP free-phone numbers, isn't this +800-XXX-XXXX arrangement a bit short-sighted? > If the U.S. position, and U.S. Users Group Position, of grandfathering > existing U.S. 800 numbers is not aggressively supported by U.S. 800 > subscribers, these companies will find they have a 50-50 chance of > winning -- or losing -- their branded number to a lottery, and > competition for the same customers and marketshare in the U.S., and > abroad. Many countries besides the US have intra-national free-phone services. Some even use the same 800 area code! I believe that Ireland, for example, even uses 1-800 as the full prefix, just like the NANP (although I understand that the number that follows is only six, not seven, digits). So why should owners of US 800 numbers (or even NANP 800 numbers -- don't forget Canada and the islands!) be singled out for the privilege of "grandfathering" their existing numbers into the worldwide +800 number space? That doesn't sound very fair to the rest of the world. I think that better schemes are available that could address both these issues (number scarcity and number collision). One simple idea would be to use the format +800--. For example, the US number 1-800-FLOWERS would also be available internationally (assuming the company was willing to pay for incoming international calls) as +800-1-FLOWERS, and a hypothetical Irish number 1-800-FLOWER could be dialed internationally as +800-353-FLOWER. Since each country code would have its own domain within the overall +800 number space, no collisions would be possible. Of course, even this simple scheme could still run into the number scarcity problem, since it presumes only a single free-phone area code for each country (a presumption that will soon break in the NANP, as the 800 NPA fills up and additional free-phone NPAs are allocated). So perhaps the only fool-proof plan is to just use +800- as a prefix to the entire national toll free number, area code and all. Under this method, the US and Irish examples above would become +800 1 800 FLOWERS and +800 353 800 FLOWER, respectively. There are disadvantages with this idea too, of course. One is that all national free-phone numbers that can be mapped transparently into the +800 space must be no longer than - 3 digits, where is the ITU limit on the number of digits that can follow the "+" sign. Fortunately, itself will soon change (or has just recently changed) from 12 to 15 anyway, so this might not be a problem. But the sheer length of the resulting +800 numbers would be unattractive. Bob Goudreau Data General Corporation goudreau@dg-rtp.dg.com 62 Alexander Drive +1 919 248 6231 Research Triangle Park, NC 27709, USA ------------------------------ Date: Sat, 21 Jan 1995 02:28:13 -0500 Subject: Re: Looking for TDM Box From: Paul A. Lee Organization: Woolworth Corporation In {TELECOM Digest), Volume 14 Issue 33, Andrew P. Dinsdale wrote (in part): > We are looking for a Time Division Multiplexing Box to split a 56k > digital line into one voice channel, one data channel and handle more > than one point-to-point digital circuit with one voice and one data > channel. MICOM in Simi Valley, CA, is somewhat of a specialist in such devices. Call them at 800-642-6687 or 805 583-8600. Paul A. Lee Voice 414 357-1409 Telecommunications Analyst FAX 414 357-1450 Woolworth Corporation CompuServe 70353,566 INTERNET <=PREFERRED ADDRESS* ------------------------------ From: gaypanda@pinn.net (Tom Ward) Subject: 800-MY-ANI-IS and Car Phone Redialers Date: 20 Jan 1995 04:57:10 GMT Organization: Pinnacle Online - Internet access for Hampton Roads, Virginia I recently called 800-MY-ANI-IS from my Contel Cellular telephone. Instead of reading back my cellular number of 804/635-XXXX the number was translated as 804/623-9110. When I tried calling this number directly, it said that the number was being checked for trouble. My question is: Do cellular switches use landline telephone lines with DIDs of their own to put calls through? Tom Ward, President & CEO AirPage Communications of Va email: gaypanda@pinn.net pager: 804/326-PAGE [TELECOM Digest Editor's Note: Something like this is common. I do know that cellular phones here in the Chicago area return very odd numbers when tested against Caller-ID and ANI. Often as not, Caller-ID boxes show the cellular phone as 'out of area', but at least in the case of my cellular phone, the ANI given was cross-referenced to a 'subscriber' given as 'IBT Company', at an address which turned out to be a central office in one of the western suburbs -- with a 312 area code yet, even though the suburbs are 708. When I tried to dial that number, it was intercepted saying the number was not in service for incoming calls. PAT] ------------------------------ From: gaypanda@pinn.net (Tom Ward) Subject: Cellular Exchanges Wanted Date: 21 Jan 1995 05:05:41 GMT Organization: Pinnacle Online - Internet access for Hampton Roads, Virginia I am working on a project to develope a shareware database of NPA/NXX data. Included in this database will be NPA/NXX location data, state, type of number (land line, pager, cellular, pcs, etc.), and responsible carrier. Each exchange is broken down into "billable" sections: for example, some paging companies by blocks of numbers from an exchange but not the entire exchange. If anyone has any information on pager and/or cellular NPA/NXX-XXXX data, please email me with the information. If you do not with to give me your cellular or pager number, I completely understand. (I wouldn't either.) Just email me with the area code, exchange and first digit of the four remaining numbers along with the city, state and carrier. Thank you all for your assistance. NOTE: All those who perticipate in "donating" information shall have their names and email addresses listed in the "Special Thanks" documentation of the program. Tom Ward, President & CEO AirPage Communications of Va email: gaypanda@pinn.net pager: 804/326-PAGE ------------------------------ From: sascjt@unx.sas.com (Chris Telesca) Subject: Re: Can Caller ID Information Be Faked? Date: Sat, 21 Jan 1995 10:09:45 GMT Organization: SAS Institute Inc. In article , sascjt@unx.sas.com (Chris Telesca) writes: > I recently got Caller-ID and *69 Call Return service beause a friend > and I have been getting prank and other strange phone calls over the > last few months. Generally it works great, but several times I've > seen a few numbers displayed numerous times and used *69 to call the > number back, only to find that the people I've called back say they > never called me at all (sometimes these are elderly people, BTW). > So I was wondering if it possible to somehow fool Caller ID/Call Return > features into displaying and/or calling back the wrong/incorrect number? > Any ideas, thoughts, experiences? Thanks to the Editor and others who have responded so far. While I have both Caller-ID and *69 phone features, my friend (who lives elsewhere) only has *69. She can only trace back the last number that called her. I get a number of ANONYMOUS CALLER calls on my Caller-ID box. If I'm not home when these calls come in, or I've turned the ringer off at night and miss a number of calls, then I can't use *69 to trace these calls. I also can't check to see if the info on the screen changes. A number of these ANNONYMOUS calls are coming from pay phones where someone can press *67 and block their phone number. *69 will not call back these numbers, according to my experience and according to Southern Bell. Raleigh is also ringed by many small towns and several different phone companies: GTE, Centel, Contel, Carolina Telephone/Sprint, etc. Calls made from some of these companies show up as OUT OF AREA calls. Some show the phone number, but will not let you use *69 to redial, so I presume that some of my ANONYMOUS calls that I can't use *69 to call back might be from these phones as well as from some local pay phones. I've back-tracked many of the calls using a 1-900 number and/or various Cross Reference phone directories (at local libraries). 99% of the calls I can trace are coming from individual homes as opposed to apartment complexes, so I don't know how someone could tap or splice into someone else's line in the open out on the street. Thanks for the info so far. Chris Telesca Associate Photographer (919)677-8001 x7489 SAS Institute Inc. / SAS Campus Dr. / Cary, NC 27513 / sascjt@unx.sas.com ------------------------------ Date: Sat, 21 Jan 1995 12:58:19 GMT From: Wilson Mohr Subject: Re: Where to Get Text of the ECPA? PAT (telecom@eecs.nwu.edu) wrote: > [TELECOM Digest Editor's Note: Now that you mention it, I have a full > copy here sent recently to me by someone, and I think I will send it > out as a special mailing in the next day or three. It is quite huge, > so I may have to just put it in the archives for reference. PAT] Yes, it is rather intimidating. It was 42 pages when I formatted it out to the printer. I do not have to worry about being able to get to sleep for awhile. One, maybe three pages and I'm out like a light! Many thanks to all for their replies. Wilson Mohr mohr@cig.mot.com Strategic Quality - Motorola Cellular Infrastructure Group [TELECOM Digest Editor's Note: It is installed in the TELECOM Archives. Anyone who wants a full copy of the text can pull it from there. PAT] ------------------------------ From: BRUCE268@news-feed.delphi.com (BRUCE268@DELPHI.COM) Subject: Where: T1 Information/FAQ? Date: 21 Jan 1995 03:07:25 -0500 Organization: Delphi Internet Services Corporation Would some one please pass on any sites/addresses where information or FAQs on T1 service might be found. Looking for general technical overview of the service. Thanks in advance. Bruce ------------------------------ From: bh0386@aol.com (BH0386) Subject: Re: ISDN in Florida Date: 21 Jan 1995 06:05:13 -0500 Organization: America Online, Inc. (1-800-827-6364) Southern Bell has ISDN in Florida. You can call 1-800-858-9413 (BellSouth Data Customer Support Center) and they can determine avaliability in your area and give you the price for both residential and business service. ------------------------------ From: garfield@vanilla.cs.umn.edu (Paul Garfield) Subject: Telephony Card/Software Needed Date: Sat, 21 Jan 1995 07:10:06 GMT I've seen a couple similar questions posted but haven't seen an answer. Please post the answer. I'm looking for cards for IBM PCs that can handle phone calls. I need to be able to program how the call is handled (when and what to play and record, what to do with touch tone presses, etc). All I've seen is things for one line. I want to start with about four lines but have the ability to upgrade to perhaps 24, so I need multiple (four or eight) lines per card. What are good vendors for this and where can I go for information? Thanks. ------------------------------ End of TELECOM Digest V15 #54 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa08771; 24 Jan 95 8:00 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA21830; Tue, 24 Jan 95 01:28:14 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA21822; Tue, 24 Jan 95 01:28:10 CST Date: Tue, 24 Jan 95 01:28:10 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501240728.AA21822@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #55 TELECOM Digest Tue, 24 Jan 95 01:28:00 CST Volume 15 : Issue 55 Inside This Issue: Editor: Patrick A. Townson Wireless and Mobile Computing Presentation (David Scott Lewis) U.S. 800 Subscribers and Freephone Issue (Judith Oppenheimer) MCI Digital 800 Information (0003436453@mcimail.com) Nynex-Prodigy News Conference (Barry M. Brooks) Markets for 220 vs. 800 vs. 900 MHz Communications? (Will Estes) Faxing Through a PABX (Doug Pickering) Questionnaire Reposting - Datacom Over Mobile Phones (Simon J. Wallace) Tonetalk / TTS (Erwin Lubbers) Does Anybody Need an ATM PBX? (Alex Zacharov) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: callewis@netcom.com (David Scott Lewis) Subject: Wireless and Mobile Computing Presentation Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Mon, 23 Jan 1995 18:29:31 GMT [TELECOM Digest Editor's Note: This message only arrived on Monday here so it is not going to be of much value for people outside the southern California area, but perhaps some of them will want to attend. In the future, please try to get meeting notices to the Digest at least two or three weeks before they occur if possible. PAT] ------------- A presentation providing an overview and forecast on wireless and mobile computing, and the overall activities of Cellsys Inc., will be held on Tuesday evening, Jan. 24, at the Los Angeles office of JETRO, the Japan External Trade Organization. David Scott Lewis, president and chief operating officer of Cellsys, will discuss emerging industry trends, including remote access and teleporting, third-generation electronic messaging, wireless LANs and `RoomLANs,' home automation and home LANs, computer-based iconic communication and agent-oriented software, palmtop and handheld communication and computing devices such as PDAs and PICs, and the role of wireless communications in interactive entertainment and virtual reality. Lewis, a graduate of the Stanford University Executive Institute, served for the past several years as the head of business development with a leading systems integrator. He is the editor and publisher of the largest-circulation Internet-based trade publication, the editor of IEEE's `hands-on' journal for engineering managers and technology executives, and a member of AEA's national `Infobahn' and `Information Superhighway' committee. The meeting will be held from 6 to 8 p.m. in the Conference Room of JETRO Los Angeles. Pizza and refreshments will be served. The meetings of the 4th Tuesday Group are fully sponsored and funded by JETRO Los Angeles. JETRO is located in the Citicorp building above the Seventh Street Market Place, between Seventh and Eighth streets on Figueroa Street. Coming from the Harbor Freeway, take the Ninth Street exit (East) from either direction. The eight-story parking-structure entrances are located on either side: Eighth Street or Seventh Street. There is no cost to attend the meeting, but reservations are requested. For reservations, contact Susana Herman by fax at 213/629-8127. CONTACT: Cellsys Inc. David Scott Lewis Telephone: 818/786-0420 Fax: 818/994-5026 E-mail: d.s.lewis@ieee.org or cellsys@earthlink.net (after March 1, 1995, use `david@cellsys.com' without the quotation marks). David Scott Lewis, Editor and Publisher HOTT (Hot Off The Tree) Internet-based electronic magazine E-Mail: d.s.lewis@ieee.org Telephone: +1.818.786.0420 ------------------------------ From: producer@pipeline.com (Judith Oppenheimer) Subject: U.S. 800 Subscribers and Freephone Issue Date: 23 Jan 1995 17:18:56 -0500 Organization: Interactive CallBrand(TM) As you read the following, remember: If the ITU is not forced to consider alternatives ... IF THE DOCUMENT THAT IS NOW ON THE TABLE PASSES UNOPPOSED ... The 1 800 FLOWERS vs. 011 800 FLOWERS scenario as I've outlined it, will become reality. THIS COULD HAPPEN AS EARLY AS THIS APRIL. That said, I've tried to answer Bob Goudreau's posting as logically as possible. It gets involved -- I've tried to keep it theaded. I'd written, > Remember, too, that international freephone numbers will *co-exist* > with domestic toll-free numbers in the U.S.. So there will be 1 800 > FLOWERS, and 011 800 FLOWERS, both of which can be called and > advertised within the United States, but which may reach competing > companies! And I'd like to add, What is worse is that the 1-800-AIRWAYS which is British Airways terminates in London now, and 011-800-AIRWAYS could go to American Airlines and terminate in Tulsa. **** For every 800 number dialed the customer will have to determine if it is international or domestic, and understand that "international" doesn't mean it terminates internationally, just that the number belongs to the international number pool. **** Bob went on, > This seems to imply that the +800 country code will contain numbers > with only seven digits, yielding a total of no more than ten million > international free-phone numbers for the entire world! Given that the > North American Numbering Plan alone is already close to running out of > seven-digit intra-NANP free-phone numbers, isn't this +800-XXX-XXXX > arrangement a bit short-sighted? Back to me, Seven or eight digits has not yet been decided. Also there are many options. You can have seven and eight digit. There is a proposal for variable format seven to nine digits. The majority want eight fixed right now so the US could have 1-800-0-xxxxxxx and the rest of the world could have what ever they want. I'd also said, > If the U.S. position, and U.S. Users Group Position, of grandfathering > existing U.S. 800 numbers is not aggressively supported by U.S. 800 > subscribers, these companies will find they have a 50-50 chance of > winning -- or losing -- their branded number to a lottery, and > competition for the same customers and marketshare in the U.S., and > abroad. I'd like to add here, There could be dozens of people who want your number. Having the number now will give you 50/50 chance, but others can obtain the numbers today or next year in other countries (say five other countries) and have a five to one chance better than you even though you have had the number for years. Based on what's currently on the table, it doesn't matter if you've had the number 30 years or 30 minutes to qualify for priority. So, Bob responded, > Many countries besides the US have intra-national free-phone > services. Some even use the same 800 area code! I believe that > Ireland, for example, even uses 1-800 as the full prefix, just like > the NANP (although I understand that the number that follows is only > six, not seven, digits). So why should owners of US 800 numbers (or > even NANP 800 numbers -- don't forget Canada and the islands!) be > singled out for the privilege of "grandfathering" their existing > numbers into the worldwide +800 number space? That doesn't sound very > fair to the rest of the world. > I think that better schemes are available that could address both > these issues (number scarcity and number collision). My response: There are approximately four million U.S. toll-free subscribers, and 150,000 freephone subscribers outside of the U.S. (Some of the 150,000 also are U.S. marketers' international freephone numbers.) U.S. marketers, large and small, corporate and entreprenurial, have invested in, developed and designed the infrastructure for, and nurtured the 800 industry into the marketing powerhouse it is today. Now, I'm a marketing person, and this is important to me. But I don't want to be unfair, or impractical, either. Bob's 100% right here. The question is, why won't the ITU allow alternatives to be discussed? Remember, random numbers mean there's no way to translate from the domestic to international. Bob's scheme is good: +800--. As Bob discusses, the US number 1-800-FLOWERS would also be available internationally (assuming the company was willing to pay for incoming international calls) as +800-1-FLOWERS, and a hypothetical Irish number 1-800-FLOWERS could be dialed internationally as +800-353-FLOWERS. Since each country code would have its own domain within the overall +800 number space, no collisions would be possible. Of course, even this simple scheme could still run into the number scarcity problem, since it presumes only a single free-phone area code for each country. So perhaps the only fool-proof plan is to just use +800- as a prefix to the entire national toll free number, area code and all. Under this method, the US and Irish examples above would become +800 1 800 FLOWERS and +800 353 800 FLOWERS, respectively. There are disadvantages with this idea too, of course. One is that all national free-phone numbers that can be mapped transparently into the +800 space must be no longer than - 3 digits, where is the ITU limit on the number of digits that can follow the "+" sign. Fortunately, itself will soon change (or has just recently changed) from 12 to 15 anyway, so this might not be a problem. But the sheer length of the resulting +800 numbers would be unattractive. Bottom line, we agree that there are better options that merit serious consideration. So the question for U.S. 800 Subscribers to ask their U.S. carriers at the ITU is, why isn't this being discussed?!!! J. Oppenheimer, Producer@Pipeline.com ------------------------------ Date: Mon, 23 Jan 1995 14:46:00 EST From: Hardwire <0003436453@mcimail.com> Subject: MCI Digital 800 Information Contact: David Sutton MCI Business Markets 404/644-NEWS MCI LAUNCHES TOLL-FREE ALTERNATIVE FOR MULTIMEDIA ACCESS First-Ever 800 Digital Service Integrates Voice, Data and Video Redefines the Way Businesses Service and Sell to Customers WASHINGTON, DC, January 23, 1995 -- In its latest extension of the Information Superhighway, MCI today announced at ComNet the first-ever tariffed and commercially available 800 digital service. MCI 800 Digital Service enables users to send and receive simultaneous voice, data and video communications through a single 800 number. Available immediately, MCI 800 Digital Service is ideal for high-speed applications including on-line shopping, remote access to corporate database libraries, customer service, technical support, videoconferencing, document sharing and software distribution. MCI's new service differs from existing data services by transferring connection costs to the service provider, thus encouraging customer access and increasing the likelihood that applications will succeed commercially. "We believe MCI 800 Digital Service will revolutionize the way companies do business," says Brian Brewer, vice president of marketing for MCI Business Markets. "For example, this service will easily allow consumers to call an 800 number to not only order software but also have it simultaneously delivered to their PC. In this same scenario, technical support could then conveniently follow via on-line screen-sharing." Wide Range of Applications By combining the ease of toll-free dialing with the power of high-speed switched data services, MCI is providing users with a highly effective, cost efficient communications link to businesses, consumers and suppliers. Typical applications might include: * On-line Interactive Catalogs -- By dialing a toll-free number, customers can view and purchase a company's products and services directly, dramatically reducing sales cycles. * File Sharing and Collaborative Computing -- Companies can work faster and smarter by enabling workers in different locations to use toll-free desktop videoconferencing and document sharing to edit documents simultaneously. * Toll-Free Access to Corporate Systems -- Companies can connect telecommuters and other office locations to corporate systems, data libraries and LANs. * Multimedia -- Users can combine voice, data and video at speeds of up to 64 Kbps, toll-free. Represents Evolution of Switched Data Services More and more of today's data applications require greater transmission bandwidth and, as a result, are tightly coupled to the underlying technology used to connect to end users. Traditional transmission rates achievable with modems, even high-speed modems, are in many cases unacceptable and degrade an application's quality until it is no longer a viable commercial product. MCI 800 Digital Service offers a solution to this problem by supporting switched data at up to 64 Kbps speeds, six times the speed of a 9.6 modem, toll-free. Digital 800 can originate through a local telephone company's ISDN basic rate interface (BRI) connection or via switched data access. Consumers can call the local phone company to order a BRI line. For consumers already using ISDN BRI or switched data access technology, connecting to a digital 800 application is as simple as dialing an 800 number. Service providers interested in developing digital 800 applications have the option of providing terminating access to their application through a choice of local exchange carrier (LEC) provided switched data, primary rate interface (PRI), BRI or MCI provided PRI terminating access methods. MCI 800 Digital Service is an integral component of MCI's portfolio of 800 services and can be used along with all existing Vision 800 and MCI 800 features. For example, time-of-day routing or percent-allocation routing can be used to ensure that every incoming call is routed to the correct location on the first attempt. MCI reporting tools, Perspective and TrafficView analysis, are also compatible with MCI 800 Digital Service. Pricing for MCI 800 Digital Service will initially reflect standard MCI Vision 800 or MCI 800 voice rates based on the type product platform selected. As with standard voice rates, 800 Digital Service rates will differ based on selection of switched BRI or dedicated PRI termination. All usage will contribute to overall 800 discounts and term commitments. MCI, headquartered in Washington, D.C., has grown from its core long distance business to become the world's third largest carrier of international calling and a premier provider of data communications over the vast Internet computer network. With annual revenues of $12 billion, the company today provides a wide array of consumer and business long distance and local services, data and video communications, on-line information, electronic mail, network management services and communications software. ------------------------------ From: BARRY M. BROOKS Subject: Nynex-Prodigy News Conference Date: Mon, 23 Jan 95 08:53:01 -0500 Organization: Delphi (info@delphi.com email, 800-695-4005 voice) [TELECOM Digest Editor's Note: Again unfortunatly, this arrived on Monday, with little chance for anyone to plan it into their schedule. Meetings should be announced here two or three weeks prior if not sooner! Thank you. PAT] ------------- Mat Stover, president and CEO of NYNEX Information Resources Company and Ross Glatzer, president of Prodigy Services Company will announce the nations first advertiser-supported, online, interactive Yellow Pages, on the information superhighway, Tuesday, Jan. 24, 1995. You are invited to participate in the interactive press briefing and live demonstration of the new interactive, online service, with Mr. Stover and Mr. Glatzer: Subject: Announcement of the NYNEX Interactive Yellow Pages Live, on PRODIGY Date: Tuesday, Jan. 24, 1995 Time: 10 a.m. (EST) Place: Lincoln Center, Rose Building (Corner West 65 and Amsterdam) Location: The Kaplan Penthouse, 9th floor You are welcome to remain in the Kaplan Penthouse after the press briefing to be among the first in the nation to JUMP NYNEX on PRODIGY. To attend the press briefing, please arrive at the Kaplan Penthouse approximately 15 minutes prior to the scheduled start of the briefing (9:45 a.m. EST). Refreshments will be served. For more information, please contact Phil Santoro, NYNEX, at (508) 762-1326. ------------------------------ From: westes@netcom.com (Will Estes) Subject: Markets for 220 vs. 800 vs. 900 MHz Communications? Reply-To: westes@usc.com Organization: U.S. Computer Date: Mon, 23 Jan 1995 06:45:14 GMT Can someone briefly go over what are the markets for different frequencies of the various spectrums for personal communication markets? I am familiar enough to know that 220, 800, and 900 MHz are the common frequencies that people seem to be using. I gather that 220 is use for Specialized Mobile Radio (SMR) applications, which appear to be one-to-many broadcast applications, like information being sent to delivery vehicles. 900 MHz seems to be reserved for high-end digital personal communication services. What are the other parts of the spectrum that are being used? What are the principle applications at each part of the spectrum? Where does current analog and digital cellular telephone fall in this spectrum? Will Estes Internet: westes@usc.com ------------------------------ From: Doug Pickering Subject: Faxing Through a PABX Date: 23 Jan 1995 07:16:42 GMT Organization: Digital Equipment Corporation Hi, I have just gotten a PABX. Everything seems to be working OK, except I cannot fax out through it (I haven't tried receiving yet). Modem connections are fine all the way up to 14400 (all my modem supports). Without the PABX, faxing is fine, but with it, the modem dials the number get connected then never gets beyond 'Connecting'. I am using WinFAX Pro 4. Picking up an extension proves that connection has been made to the other fax. I have a Rockwell based Voice/Fax/Modem. Any ideas? Doug Pickering ------------------------------ From: Simon J Wallace Subject: Questionnaire Repost - Datacom Over Mobile Phones Organization: Edinburgh University Date: Mon, 23 Jan 1995 10:10:23 GMT May I first thank all respondant to my questionnaire (14). I was hoping for 20 so I'll repost to see if I can get a few more. I will of course post all results next week. I wonder if you could help me with a questionnaire I am doing for my Masters Degree. I would appreciate some opinions on DATA communications over mobile phones. It should only take a couple of minutes. Could you please post the replies to me at sjw@ee.ed.ac.uk. I shall post my findings as soon as I have collated them. Thanks in Advance. Simon #:-) 1) Do you have a Digital (D), Analog (A) or Dual Mode (DM) phone? 2) Do you at present use your mobile phone to transmit data? 3) Do you at any time in the future plan to use a mobile phone to transmit data? 4) If so what factors would influence your decision: i) ease of use; ii) cost of equipment; iii) cost of calls; iv) reliability; v) Other please state: 5) What be your MAIN use of mobile data comms? Thanks again Simon #8-) ------------------------------ From: elubbers@inter.nl.net (Erwin Lubbers) Subject: Tonetalk / TTS Organization: NLnet Date: Mon, 23 Jan 1995 10:26:53 GMT I need information about the Tonetalk/TTS voicemail card for the PC. Does someone have this info or do you know where to get it? Thanks, Erwin ------------------------------ From: alexz@tmx100.elex.co.il (Alex Zacharov) Subject: Does Anybody Need an ATM PBX? Date: Mon, 23 Jan 1995 11:33:34 GMT Organization: Telrad Ltd. I would like to make a little referendum: If somebody had offered an ATM PBX in a form of small N-ISDN servers interconnected by ATM, supporting N-ISDN basic and supplementary services with interfaces to global ATM and PSTN, who would have bought it NOW? Regards, Alex alexz@tmx100.elex.co.il ------------------------------ End of TELECOM Digest V15 #55 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa09368; 24 Jan 95 8:51 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA22917; Tue, 24 Jan 95 02:46:42 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA22910; Tue, 24 Jan 95 02:46:39 CST Date: Tue, 24 Jan 95 02:46:39 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501240846.AA22910@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #56 TELECOM Digest Tue, 24 Jan 95 02:46:00 CST Volume 15 : Issue 56 Inside This Issue: Editor: Patrick A. Townson Changes to 411 Directory Assistance Service in Atlanta (Nigel Allen) BellSouth ISDN Rates (Was ISDN in Florida) (Ed Goldgehn) Belgacom and Greek Panaphone (Juha Veijalainen) LD Provider Juggling (Justin T. Leavens) Sub-Lease 900 Number Possible? (Clint Scott) GAO's Information Superhighway Report (Mike Dolak) Voice Over Frame Relay and ISDN (Dino Sims) Spokane Service Outage (Ry Jones) Jobs Available in San Diego: ATM/SONET/OC48 (Shaun Maki) FAX Group 3 and Group 4 Standard Information Wanted (Elron Adar) Help Needed Locating Retailer For MicroTac Ultralite (Steve Chinatti) Help Needed With Procomm (kbsherm@holonet.net) PC Telcom Equipment Wanted (Tom Lempicke) Re: Where to Find Nice-Looking Phones? (Alan Boritz) Re: Where to Find Nice-Looking Phones? (Wes Leatherock) Re: US <> Purto Rico: Options? (Julio Frondeur) Re: CO/Boston Added to NACN (John R. Covert) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Tue, 24 Jan 1995 03:35:21 -0500 Subject: Changes to 411 Directory Assistance Service in Atlanta From: ndallen@io.org (Nigel Allen) Organization: Internex Online (io.org) Southern Bell says it is introducing a more-automated directory assistance service which will reduce the amount of speaking a directory assistance operator has to do. The company didn't say whether the resulting savings in operator time will lead to layoffs. And it seems as if the company is reducing operator time at the expense of making customers wait on the phone longer while a shortened recorded version of their request is played back to an operator. It is not clear whether the service will also be used for long distance directory assistance requests from outside the Atlanta area. A Southern Bell press release says: "With the company's new DA*Plus service, customers dialing 411 are greeted by the system and then are asked for the name of the city and the person or business whose phone number they need. The system will then record the customer's response. After the information is recorded, DA*Plus automatically trims the silence at the beginning and end of the customer responses and places the call in queue for the next available operator. By eliminating the pauses and silence on each call, the operator hears only the customer's responses, not any hesitation or pauses. The operator then checks for the listing and provides the number requested to the caller just as it is done today. At any time, a caller who wishes to bypass the service can press zero and is immediately connected to an operator." (The press release does not explain how someone with a rotary dial can be connected to an operator.) The company says that customers who have questions or comments about this new service may call 404-780-2323. Attendants will be available to answer questions Monday through Friday from 8:30 a.m. to 4:30 p.m. Journalists can call Lynn Bress of Southern Bell at 404-391-2484. Nigel Allen, Toronto, Ontario, Canada ndallen@io.org ------------------------------ From: edg@ocn.com (Ed Goldgehn) Subject: BellSouth ISDN Rates (Was ISDN in Florida) Date: 22 Jan 1995 16:01:31 GMT Organization: The INTERNET Connection, LLC Reply-To: isdn@ocn.com In article , xu@gate.net says: > I was wondering if anyone has heard anything about Southern > Bell implementing ISDN in Florida? I've been considering it to get a > link to the net and a business line as well. I was also wondering if > anyone could give me an idea of the rates I might get charged. If no > one knows or isn't sure how about a number I might call to get this > info? Barring that I was wondering if anyone was currently using ISDN > in Florida and what their experiences with it were. The rates for BellSouth ISDN in all areas are: BELLSOUTH RESIDENCE --------- --------- ISDN RATES (2B+D) Flat Rate Monthly* State Minimum Maximum Installation Alabama $63.85 $68.60 $210.00 Florida 52.80 56.15 226.00 Georgia 60.05 66.40 184.50 Kentucky 54.67 60.05 213.00 Lousiana# 70.50 70.50 259.80 Mississippi 61.29 65.51 196.00 North Carolina 72.44 75.01 197.50 South Carolina 57.70 60.40 212.50 Tennessee 24.50 29.50 N/C** *Minimum & Maximum Rates are due to different rate groups. (The rate will not be more than the maximum or less than the minimum.) #Louisiana rates are not rate group sensitive **Residence service order charge and line connection charge for initial installations will be waived for a period of one year beginning October 29,1993. (Tenn. Only) BELLSOUTH BUSINESS --------- ^^^^^^^^ ISDN RATES (2B+D) Flat Rate STATE MONTHLY INSTALLATION ---- ------- ------------ Alabama $93.50 $219.00## Florida 93.50 206.00## Georgia 93.50 208.25## Kentucky 91.00 230.00## Louisiana 95.50 254.19## Mississippi 94.50 236.00## North Carolina 93.50 212.50## South Carolina 91.00 232.50## Tennessee 93.50 58.50## These rates do not include any features or packet services. Rates Subject to change. Rates Subject to all applicable taxes ========================================================================== ##Before firm rates can be confirmed, loop qualification and facilities availability request must be processed for each address. This request is to determine if the local facilities meet distance and provisioning requirements. This will determine if ISDN can be provided to that address without additional charges. To have the above request performed for your location, send your name, the name telephone service is listed to, the address and existing telephone number to: isdn@ocn.com ========================================================================== Open Communication Networks, Inc. (OCN) provides turnkey ISDN implementation services which includes the ordering and coordination of ISDN installation with BellSouth (and other telcos) as well as coordination with ISP's (we'll check what customer equipment requirements they have). OCN also provides a "dial-in" test site for all forms of ISDN data connections including terminal emulation, SLIP, and PPP (sync and async). OCN provides the above services *at no additional charge* when the customer's ISDN equipment is purchased at LIST PRICE. For more information, send e-mail to isdn@ocn.com Ed Goldgehn E-Mail: edg@ocn.com Sr. Vice President Voice: (404) 919-1561 Open Communication Networks, Inc. Fax: (404) 919-1568 ------------------------------ Subject: Re: Belgacom and Greek Panaphone From: juha.veijalainen@pcb.compart.fi (Juha Veijalainen) Date: Mon, 23 Jan 95 22:33:00 +0200 Organization: ComPart BBS - Helsinki, Finland References: > I send this letter to protest for the services of Belgacom Proximus > Cellular Telephone service and that of the Greek Panaphone. I am an > owner of a Panaphone number and I am visiting Belgium since 10 > December 1994. My telephone is not working in a certain area of > Belgium even the Proximus signal is very stong. This area is This sounds familiar. Let me guess, you are using a handheld phone, right? I visited Belgium and Holland last autumn and had similar problems. IMHO the problem is that GSM networks in those countries are not built for handheld phones. Cells are too widely apart and use maximum power allowed for a cell site (20 W?). Your phone sees the cell transmitter and may even show maximum field strength. When you try to _use_ your phone, you'll see that field strength indicator rapidly goes to zero and net connection is lost (that is what happens with Nokia 2110). Handheld phones' 2 W maximum transmitting power is not enough, when cell transmitter is shouting at 20 W! The only decent GSM nets (for handheld phones) are in my opinion in Finland and Sweden (I've used my phone also in UK, the Netherlands, Belgium and Switzerland). Lots of low power cell sites make it work. Juha Veijalainen Helsinki, Finland ------------------------------ From: jtleavens@aol.com (JT Leavens) Subject: LD Provider Juggling Date: 23 Jan 1995 13:35:15 -0500 Organization: America Online, Inc. (1-800-827-6364) Reply-To: jtleavens@aol.com (JT Leavens) I had my LD service provided to me by AddTel, a LDDS reseller until October 94, when I switched it all to LDDS directly, except for a lonely 800 number that I was hanging on to, but not really using. So I was still getting bills from AddTel for this 800 number with just a few wrong numbers that called the line; no big deal. In December, I took a closer look at my bill and noticed that AddTel was still charging me for the monthly rates for the 800 number they were no longer carrying, and I got suspicious. I then combed through bills since I had switched my service, and found that there were calls that were still being billed by them on that 800 number, even though LDDS was supposedly my provider. Not a lot of calls, mind you, but just a few. Checking my AddTel bills against my LDDS bills I found: *Most of the service was provided by LDDS, as it should have been. *There was an entire week in November when AdTel billed my service and LDDS did not. It was a Monday through Friday, for no explanation I can provide. *There were some days when LDDS and AdTel seemed to fight for my calls, some calls in a day going to one carrier and others going to the other, right after each other with no pattern. *Most upsetting were calls I found on BOTH bills, billed by both companies. There is no doubt that these were the exact same calls. How exactly can this happen? I got a partial explanation from a tech at LDDS who said a "send resporg command to the SDS database" would take care of the routing to LDDS (I assume that's the central 800 database that ensures the proper call routing), but how exactly could the two companies both bill for a single call? And do I have any responsibility to pay AdTel for providing service when I expressly did *not* want them to? Especially since being able to compare identical calls billed side by side proved that I had saved a good bit of money by switching to LDDS. Any ideas from anyone? Thanks in advance! Justin Leavens ------------------------------ From: cscott@Starbase.NeoSoft.COM (Clint Scott) Subject: Sub-Lease 900 Number Possible? Date: 22 Jan 1995 16:02:37 -0600 Organization: NeoSoft Internet Services +1 713 684 5969 I am in need of 'renting' a 900 number for a one month trail period. I don't want to have to pay the whole down money, etc just for this brief time. Is it possible to sort of sub-lease a 900 number with a particular extension? E-mail is preferable to news post. cscott@starbase.neosoft.com ------------------------------ From: mjdolak@access3.digex.net (Mike Dolak) Subject: GAO's Information Superhighway Report Date: 23 Jan 1995 00:00:40 GMT Organization: Digex Net The United States General Accounting Office (GAO) has released a report entitled Information Superhighway: An Overview of Technology Challenges (GAO/AIMD-95-23). The 84 page report provides an overview of pivotal technical issues -- security and privacy, interoperability, and reliability -- facing the industry and federal regulators in planning and implementing the information superhighway. Orders for a single free copy of this report may be placed by calling (202) 512-6000, by using fax number (301) 258-4066, or by mailing a request to the U.S. General Accounting Office, P.O. Box 6015, Gaithersburg, MD 20884-6015, USA. ------------------------------ From: dino@crl.com (Dino Sims) Subject: Voice Over Frame Relay and ISDN Date: 23 Jan 1995 14:02:53 -0800 Organization: CRL Dialup Internet Access Hello all, My company is in the process of installing a WAN between our locations here in Atlanta, Hong Kong and Holland. And I was wondering is it possible or even practical to do voice over frame relay or isdn to extend our digital PBX system (Executone 432) so users here can just punch in an extension and get someone over seas. Also has anyone done video conferencing over frame relay? I know that all of this is possible by using 56k leased lines but I would like to try and save some money :-) Dino Sims Systems Administrator Atlanta, GA email1 dino@crl.com email2 DSims_+a_AJC_+lDino_Sims+r%AJC_International@mcimail.com ------------------------------ From: rjones@rjones.oz.net (Ry Jones) Subject: Spokane Service Outage Date: 23 Jan 1995 19:55:50 GMT Organization: The SenseMedia Network, http://sensemedia.net/ Saturday morning on KIRO (710 AM, Seattle) they said that USWest was trucking in hundreds on service persons from Idaho and Western Washington to "Dry out lines on the south hill of Spokane", where apparently several thousand people are without service at this hour. Does anyone have the 411 on this outage? What happened? ------------------------------ From: smaki@teleport.com (Shaun) Subject: Jobs Available in San Diego: ATM/SONET/OC48 Date: 23 Jan 1995 20:27:51 GMT Organization: Teleport - Portland's Public Access (503) 220-1016 ATM/SONET/DS3/T1/FAX/modem in moderate sunny San Diego: Pay can be over 100K/year depending on experience! If you have the above skills please read to the bottom. More than ten jobs are being filled right now. From Component Engineer to Hardware Manager. From Software Engineer to Software Manager. With the right background you may find yourself working as a technology scientist planning the next generation. HARDWARE DEVELOPMENT MANAGER: Overall responsibility for board level hardware development including initial high level definition, detailed design, simulation/verification building and debugging of prototypes, and successful introduction into production. In addition to extensive hands-on detailed design experience (uP, ASIC's, FPGA's, ...), a minimum of three years of management experience is required along with a BSEE /MSEE. Must be comfortable working in a team oriented high energy environment, T1/DS3/SONET telecom experience is a plus. SOFTWARE MANAGER TELECOMMUNICATIONS: BSEE/BSCS (Masters desired): Eight + years experience with a minimum of three years experience in managing software development for multiprocessing embedded systems; strong C/C++ programming skills in UNIX development environment; experience with real-time kernels (PSOS, VRTX, OS-9, must also have experience with systems oriented towards fault tolerant software architecture and software associated with Digital Telephony switching systems. TECHNOLOGY SCIENTISTS (multiple jobs): Requires masters degree or higher with extensive ATM/SONET real world experience. Develop the next generation in a laboratory environment with all the toys you want. Within reason you will be given whatever you need. LEAD SOFTWARE ENGINEER: TELECOMMUNICATIONS SYSTEMS: BS/MS, EE/CS and eight+ years of experience in multiprocessor embedded system software development. Strong C/C++ programming experience in UNIX development required. Experience in software architectures typified by digital telephony switching systems, telephony network access servers/routers, etc. a plus. Candidates will lead design team in the architecting and development of real-time, fault tolerant, multiprocessor software. Must posses strong technical leadership skills and proven ability to be a self-starter in the ground-level architecting and development of new products. LEAD SOFTWARE ENGINEER: DSP PRODUCT DEVELOPMENT: BS/MS/PhD in EE or a related discipline and five + years DSP software development experience. Qualified candidates will lead design team in the development of real-time DSP engine for high speed analog and digital protocol analysis, Must Posess strong technical knowledge in the area of DSP algorithms used in the transmission and discrimination of FAX and modem protocols, associated training sequences, signal constellations, and compression (Group III FAX, V.32, V.32bis, V.42bis, MNP, etc.). Strong technical leadership/decision making skills and proven ability to deliver products from conception to production also required. SOFTWARE ENGINEERS: TELECOMMUNICATIONS (multiple jobs): Candidates must posses BSEE/BSCS (masters desired); strong C/C++ programming skills; five + years experience in the development of real-time embedded systems; basic knowledge of assemble language (particularly the Motorolla 68K family); strong debugging skills using native debugger and associated emulators. Experience with products interfacing to the digital telephone network a plus. PHYSICAL DESIGN MANAGER: Overall responsibility for Mechanical Engineering and Document Control including mechanical/OEM issues, managing the engineering change control process, and successfully transitioning new designs from engineering into production. BSME/MSME is required along with experience in introducing complex multi-level products into volume production in an ISO/Bellcore quality environment. Hands on experience is beneficial along with a minimum of four years of management experience. COMPONENT ENGINEER: BSEE Required. Work with design engineers selecting components and perform functional/performance analysis of components. Do not reply to this message. EMail direct to smaki@teleport.com with a phone number and reasume (if easy). Otherwise just your phone number will do. I will call you on my nickel. Or you may call me if you wish at the number below. -- Shaun Maki smaki@teleport.com 503 614 9627. Must be legal to work in the US (no H1/F1 visa!). If you are a student without experience please do not respond. ------------------------------ From: vocaltec@datasrv.co.il Subject: FAX Group 3 and Group 4 Standard Information Wanted Date: Tue, 24 Jan 95 07:02:11 GMT Organization: Elron Adar Where can I find the CCITT standard for fax group 3 and group 4 transmission? Thanks. ------------------------------ From: chinatti@SRTC.COM (Steve Chinatti) Date: Mon, 23 Jan 1995 16:45:27 -0500 Subject: Help Needed Locating Retailer for MicroTac Ultralite Hi, I'm looking for information on purchasing a Motorola MicroTac Ultralite flip phone. I'm in the central NJ area and I am interested in activating with Bell Atlantic mobile, as one of their plans seem to best fit my travel area and calling patterns. My problem is that I cannot find a discounter in the area that activates with Bell Atlantic and carries the Ultralite. I've called Bell Atlantic but I have been unable to get a list of discount retailers that activate with BAMS, probably because Bell Atlantic would like to have me buy the phone through them (at list price!). The coverage area I'm looking for is Central NJ - Philly. I was wondering if anyone has any tips on how to find a discount retailer in this area that I can buy from, or possibly some mail order house that has good prices. Since this is a pretty specific question, it would probably be best to e-mail responses to me, and if I come up with any leads I'll post a summary. Thanks in advance, Steve Chinatti ------------------------------ From: kbsherm@holonet.net (tacnav) Subject: Help Needed With Procomm Date: 23 Jan 1995 23:27:50 GMT Organization: HoloNet National Internet Access System: 510-704-1058/modem I am having trouble using PROCOMM. Can anyone offer me some help? Thanks, ken kbsherm@holonet.net ------------------------------ Date: Tue, 24 Jan 1995 04:43:27 GMT From: tlempicke@sunbelt.net Subject: PC Telcom Equipment Wanted Organization: SunBelt.Net Does anyone know of a drop in board for a PC which would allow it to handle an office phone system? I have three incoming lines and eight extensions, and it seems like a perfect project for a dedicated PC. The open architechture and programming would allow future expansion, etc>. Thanks, Tom Lempicke Tlempicke@sunblet.net ------------------------------ Subject: Re: Where to Find Nice-Looking Phones? From: drharry!aboritz@uunet.uu.net (Alan Boritz) Date: Mon, 23 Jan 95 20:59:55 EST Organization: Harry's Place - Mahwah NJ - +1 201 934 0861 ophidian59@aol.com (Ophidian59) writes: > If you want an inexpensive high quailty phone, try buy a plain > telephone at the parts counter of your local Greybar, a telephony > supply house. Figure into the cost of picking up that phone, window or car repair. The last time I parked down the street from Graybar, in Long Island City, someone broke off a new padlock from the back of my truck (within about 15 minutes). It's much safer to deal with them via mail order. ------------------------------ From: wes.leatherock@oubbs.telecom.uoknor.edu Date: Mon, 23 Jan 95 19:14:36 Subject: Re: Where to Find Nice-Looking Phones? Quoting ophidian59@aol.com (Ophidian59) > While on the subject of phones, I'd really like to find one of > those old yet very mod (e.g. 60's) British phones with the dial > and the hook-switch on the bottom. Anyone? Do you mean the Ericofon? That was Swedish, made by L.M. Ericsson Company. Wes Leatherock wes.leatherock@oubbs.telecom.uoknor.edu wes.leatherock@f2001.n147.z1.fidonet.org [TELECOM Digest Editor's Note: I knew someone with an Ericofon back in 1967; they were really considered very avante-guard back then. Of course he had *no permission* whatsoever from telco to have it on his line. PAT] ------------------------------ From: Julio Frondeur Date: Mon, 23 Jan 1995 16:13:42 -0500 Subject: Re: US <> Purto Rico: Options? Organization: InfiNet You may try asking Puerto Rico Telephone Co. for their Switched-56 offering which is much less expensive than the 4K monthly figure you actually have. The C.O. serving the Carolina area is a DMS-100 equipped with the TCM-based SW-56 feature called DATAPATH by Northern Telecom. If you are within 15K feet from the C.O., it will be piece of cake for PRTC to give you the service. Julio Fondeur ------------------------------ Date: Mon, 23 Jan 95 11:42:23 EST From: John R. Covert 21-Jan-1995 1125 Subject: Re: CO/Boston Added to NACN NACN in Boston does not appear to be working very well. Sitting here in Boston, I just turned on my Montreal CanTel number; the first thing I tried was to call in via the Montreal number. Usually (e.g. in Pittsburg) calls are properly routed to the phone within five seconds of power-on. Calls continued to no-answer transfer at the Montreal end until I actually attempted to originate a call with the Montreal number here in Boston. Then call delivery started working some but not all of the time. Frequently there was just a fast-busy. None of the feature codes work -- I've tried to use the Ericsson codes (*21* to forward, #21# to cancel) which work when roaming using the CanTel number in Albany, Rochester, Pittsburg, Florida, and San Francisco but not in Utica or Dallas/Fort Worth. I also tried the Cellular One/SWBell feature numbers for Boston, but nothing. At the moment I have turned the phone back off, and calls are no longer going to the no-answer transfer location. That works properly when the phone is turned off in most other places (such as Florida), without the need for any timeout period. It even worked on failed pages; in South Florida I could leave my CanTel number forwarded on no-answer to my NYNEX number; if I got a failed page on the CanTel number I had time to switch to the other NAM and would receive the call on the NYNEX number via BellSouth. But none of this works in Boston; it looks like Boston's NACN connection is either AFU or not completed. /john ------------------------------ End of TELECOM Digest V15 #56 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa17463; 24 Jan 95 20:12 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA01817; Tue, 24 Jan 95 12:08:10 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA01802; Tue, 24 Jan 95 12:08:07 CST Date: Tue, 24 Jan 95 12:08:07 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501241808.AA01802@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #57 TELECOM Digest Tue, 24 Jan 95 12:08:00 CST Volume 15 : Issue 57 Inside This Issue: Editor: Patrick A. Townson Where to Find tpage? (Rob Etzel) Want Information on Wireless Short WAN Links (Eduardo Kaftanski) What's the Current Status of LEOS? (Donald R. Newcomb) Data Wanted Measuring Internet Performance (Jeff Grau) PC Board For Terminal Emulation (SNA, BSC, VIP) (Massimo Fusaro) Cellular Service in the Lincoln Tunnel (Doug Reuben) New RJ-48 Jack Used in Nynex Service Area For T-1? (Steve Pinkston) Marketing Strategies Information Request (Angelo Raffaele Fernicola) Looking For Voice Mail For Panasonic Key Switch (Rebecca Brooke) Where Can I Find a Telecom Group in Chicago? (logicarsch@aol.com) Re: Looking For TDM Box (Roger Atkinson) Re: Flat Rate Long Distance (Edwin Chen) Re: Inter-Lata Rates in California (Ed Smith) Re: GSM Cellular Operators List (Lim Kong Hong) Re: T1 vs. T3: What's the Difference? (sjohn0421@aol.com) Re: Areas Covered by Phone Book? (Paul Robinson) Re: CallerID and ANI (Glenn Foote) Re: Antenna For Cellular Phone in Bangkok (Alan Shen) Re: Is the Pentium Bug Really That Bugging? (Alan Shen) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: rob@cutter.cpac.washington.edu (Rob Etzel) Subject: Where to Find tpage? Date: 24 Jan 1995 00:59:47 GMT Organization: The Center for Process Analytical Chemistry Can someone please tell me where I can find tpage, the perl (?) code to talk to alpha-numeric pagers? Also, where are the FAQ's that might have answered this question? Thanks, Rob Etzel Computing Services Manager Center for Process Analytical Chemistry 153 Chemistry Library Building University of Washington, BG-10 Seattle WA 98195 Office: (206) 543-9881 Fax: (206) 543-6506 E-Mail: rob@cpac.washington.edu ------------------------------ From: ekaftan@mailnet.rdc.cl (Eduardo Kaftanski) Subject: Want Info on Wireless Short WAN Links Date: Tue, 24 Jan 1995 02:36:49 GMT Hi, I need information on small (less than 300 meters) WAN/LAN wireless links. I have two offices separates less than three blocks, with a clear line of sight, and as I am in a non-purely business area, leased lines involve digging in the street at my expense. I am looking forward to near Ethernet speed if posible. Can it be done? At what cost? I can buy direct from a US company (I am not in the US but have a Miami address for shipping). Many thanks for any answer. I can be reached at: ekaftan@ing.puc.cl for direct e-mail. ------------------------------ From: dnewcomb@whale.st.usm.edu (Donald R. Newcomb) Subject: What's the Current Status of LEOS? Date: 24 Jan 1995 08:01:14 -0600 Organization: University of Southern Mississippi A few years ago we were hearing about numerous proposals for global personal communications based on LEOS (Low Earth Orbital Satellite) systems. One was Motorola's proposed Iridium system. I have not heard anything about these in the last few months. Have we reached some sort of watershed. What's the news? I'd like to find a low-power (e.g. ~1 W) system with better bandwidth than ARGOS. Donald R. Newcomb University of Southern Mississippi dnewcomb@whale.st.usm.edu "The God who gave us life gave us liberty dnewcomb@falcon.st.usm.edu at the same time." T. Jefferson (1774) ------------------------------ Date: Tue, 24 Jan 95 10:12:44 EST From: grau@library.mt.att.com Subject: Data Wanted Measuring Internet Performance I am a reference librarian at Bell labs who has been asked to find data measuring Internet performance. Specifically, my client wants to know how long it takes for ascii text to travel from a point "A" to a point "B" under different situations that might be time of day, day of week, etc. A colleague of mine says measurements of packet transfer rates have been done but doesn't know where to find them. If you have such data and are willing to share it or know where I might find it, I would appreciate hearing from you. Please send any responses to: grau@library.mt.att.com Thank you, Jeff Grau ------------------------------ From: max@sixcom.it (Massimo Fusaro) Subject: PC Board For Terminal Emulation (SNA, BSC, VIP) Date: Mon, 23 Jan 1995 14:36:52 +0100 Organization: Sixtel S.p.A I need information about sells and forecast of PC board for terminal emulation (BSC, SNA, VIP) for the european market or where to find such information. Please reply by mail, I'll summarize. Massimo Fusaro E-mail: max@sixcom.it Sixtel S.p.A. X400: c=it;admd=garr;prmd=IUnet;O=sixcom;S=max Milan, Italy Phone: +39 (2) 3192 216 ------------------------------ From: dreuben@interpage.net (Doug Reuben) Subject: Cellular Service in the Lincoln Tunnel Date: Mon, 23 Jan 1995 13:42:57 EST Just a quick note ... Cell One/NY (00025) has added cellular coverage in the Lincoln Tunnel ("Temp" I-495 between NY and NJ), providing through service from one end to the other. Callers can now place and receive calls, or continue on existing calls uninterrupted. A very productive addition considering how backed up traffic can be there! No service yet (that I have heard of) in the Holland Tunnel (was going to be I-78 when they still built new roads in NYC ...). NYNEX is dead in the Lincoln Tunnel. It seems that most of the tunnels in the northeast are now covered: -In Boston, CO/Boston (and NYNEX/Boston?) has excellent coverage in the Callahan and Sumner Tunnels. -In NYC, the Lincoln Tunnel is now covered by CO/NY. -In Baltimore, both tunnels are covered quite well by CO/Baltimore-DC and BAMS/Baltimore-DC. -In DC, the "tunnels" under the Mall (I-395, was to be I-95) and the I-195 (?) tunnels both have excellent coverage with both carriers. (How's the coverage in the Chesapeake Bay Bridge/Tunnel and in Newport News, VA?) Am I missing any? Doug Reuben dreuben@interpage.net (203) 499 - 5221 Interpage Network Services -- E-Mail/Telnet to Alpha or Numeric Pagers & Fax ------------------------------ From: pinkston@kentrox.com (Steve Pinkston) Subject: New RJ-48 Jack Used in Nynex Service Area for T-1? Organization: ADC Kentrox - Portland, Oregon Date: Mon, 23 Jan 1995 19:13:52 GMT We've had reports of a new type of RJ-48 jack being used in the Nynex service area for T-1 service. Can anyone familiar with Nynex practices and materials help us out? The traditional RJ-48X jack provides shorting bars which loop transmit (pins 4 and 5) to receive (pins 1 and 2) when the customer's plug is withdrawn. The RJ-48X jacks we're familiar with do this by means of a small stationary printed circuit board upon which the "fingers" of the jack rest when the plug is withdrawn. The reports we're getting describe a jack which has some sort of mechanism that is moved off of its shorted position by contact with the flat areas of the plug adjacent to the outside pins (1 and 8). The problem is that some vendors' RJ-48 jacks are solid in this area and some have grooves that look as if they could accomodate a 9th and 10th contact. These grooves apparently prevent the shorting mechanism from releasing. If anyone is familiar with these jacks, we would appreciate your help. We need: 1. The name of the manufacturer of these jacks. 2. The part number of these jacks. 3. The spec, if any to which they are designed. 4. A sample of the jack itself, if possible. Please respond directly by email to pinkston@kentrox.com and cc: lilesc@kentrox.com. You can also reach me at 1-800-733-5511, ext 6341. We would greatly appreciate any help or pointers to resources. ------------------------------ Subject: Marketing Strategies Information Request Date: Mon, 23 Jan 95 16:49:29 CET From: Angelo Raffaele Fernicola Hi, I'm looking for someone who can help me to find (or tell me where to find) information on marketing strategies of communications companies in the EEC. Maybe it's not clear what I want, so if somebody thinks they can help me, e-mail to MC56652@mclink.it. Thank you, Raffaele Fernicola ------------------------------ From: Rebecca Brooke Subject: Looking For Voice Mail For Panasonic Key Switch Date: 23 Jan 1995 14:38:32 GMT Organization: The Internet Access Company We have a Panasonic 616(KXT) key switch and want to add auto-attend/voice mail. Can voice mail be added to this system at all? Is there a "generic" component we can add on that will do the job and acts like a separate extension? ------------------------------ From: logicarsch@aol.com (LogicaRsch) Subject: Where Can I Find Telecom Group in CHICAGO? Date: 22 Jan 1995 22:05:25 -0500 Organization: America Online, Inc. (1-800-827-6364) Reply-To: logicarsch@aol.com Are there any telecom groups/clubs/associations that meet in Chicago? I'm not talking about cyberspace -- I mean the sort of thing where real, live humans come together in a defined physical space -- a room, for example -- and converse. I'm an independent market research consultant specializing in telecom? How can I hobnob with all you telecom types? [TELECOM Digest Editor's Note: Someone is not checking through recent back issues before submitting questions ... this identical question came up here two or three weeks ago and perhaps one or more of the people who responded at that time will write directly to the correspondent with an answer. PAT] ------------------------------ From: rogera@cts.com (Roger Atkinson) Subject: Re: Looking for TDM Box Organization: R. F. Atkinson & Co. Date: Tue, 24 Jan 1995 04:26:18 GMT In article aa293@detroit.freenet.org (Andrew P. Dinsdale) writes: > We are looking for a Time Division Multiplexing Box to split a 56k > digital line into one voice channel, one data channel and handle more > than one point-to-point digital circuit with one voice and one data > channel. Try Glasgal Communications, Inc. Their number is 800-LANWAN1 (800-526-9261). They have a huge variety of equipment, and in my experience, their people are competent. Good luck! Roger Atkinson ------------------------------ From: chen@leland.stanford.edu (edwin chen) Subject: Flat Rate Long Distance Information Wanted Date: Tue, 24 Jan 1995 20:26:52 -0800 Organization: Stanford University If anyone has any information about flat rate long distance calling, please e-mail me with it. I'm trying to diminish my phone bill. I currently have a $149/month service but it has a 20 minute/call limit. Thanks. Edwin chen@leland.stanford.edu [TELECOM Digest Editor's Note: Edwin, are you seeking information or trying to slip in a sales pitch? ... by the merest coincidence of course (of course!) this very topic consumed a great deal of bandwidth in a couple other telecom newsgroups in recent weeks. Some respondents were very suspicious of the program. Wasn't there some discussion of having to make payment by courier service rather than regular mail? Weren't there a couple other questions raised but never really answered about the firm? If you are getting truly unlimited service for $149 per month, with no gimmicks and no fraud (there was a hint of that in the other discussion, wasn't there?) then I would say you probably have the best deal you are going to find if your usage otherwise would total at least $200-250 or more per month through more 'conventional' carriers. If all you are using normally is $100-150 per month, then its just a dollar for dollar trade, with your twenty minute per call restriction and (I think I read) a limit of one call at a time. Since all the major and well-established carriers will cut various deals with large users, even if your 'normal' usage came to $200 or so per month, you would not be getting any significant savings. I don't know of any instances where the major carriers will give a forty or fifty percent discount, so if your bill would usually be in excess of $250-300 per month, then I would say you have a good bargain. But at the going rate per minute, if you are on the phone long distance that much time, you must be on the phone for something or other for several hours per day. Well ... I guess I am also, now that I think about it. I am on the dialup to Northwestern University for several hours each day, but I don't know how I could live with the twenty minute per call limit. Is your useage mainly for data transmissions, or do you use it for voice also? Does the carrier allow data transmissions? PAT] ------------------------------ From: knute@netcom.com (Ed Smith) Subject: Re: Inter-Lata Rates in California Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Tue, 24 Jan 1995 09:21:24 GMT I know of at least one company in California that has inter-lata rates that start at .096 flat per minute billed in six second increments for a one year term. I am not permitted to post the company's name. I will respond to any email on the subject. (See Biz.Comp.Services) Puerto Rico $0.20; Australia $0.34; Germany $0.46; U.K. $0.29; Hong Kong $0.52; Brazil $0.69; Canada $0.23; France $0.41; Netherlands $0.40; Singapore $0.50. knute@netcom.com ------------------------------ From: limkh@einstein.technet.sg (Lim Kong Hong) Subject: Re: GSM Cellular Operators List Date: Tue, 24 Jan 95 02:45:52 PST Organization: Siemens (Pte) Ltd Reply-To: limkh@technet.sg In article , Kimmo.Ketolainen@utu.fi says: >> Estonia EMT > New: > Estonia=09=09Radiolinja >> Hong Kong Smartone > Also: > Hong Kong=09Telecom CSL In Singapore there is Singapore Telecoms Mobilelink GSM GSM Code 525-01. In Singapore, GSM subscribers have the option to subscribe to autoroaming services to Hongkong, UK, Australia, Switzerland and Denmark. This means that with their GSM SIM Card, they are able to send/receive call in the above countries. ------------------------------ From: sjohn0421@aol.com (SJohn0421) Subject: Re: T1 vs. T3: What's the Difference? Date: 24 Jan 1995 10:05:21 -0500 Organization: America Online, Inc. (1-800-827-6364) Reply-To: sjohn0421@aol.com (SJohn0421) The difference, (besides pricing) is bandwidth. A T1 has total bandwidth at 1.54 Mbps. Thats 24 channels at up to 64kb of speed. A DS3, or T3, has enough bandwidth to carry 28 T1's. That's quite a bit of bandwidth. ------------------------------ Date: Tue, 24 Jan 1995 11:13:54 EST From: Paul Robinson Organization: Tansin A. Darcos & Company, Silver Spring, MD USA Subject: Re: Areas Covered by Phone Book? Benjamin P. Carter , writes: > A typical phone book with both white and yellow pages has a > map with a large white area surrounding a smaller yellow area. > What is this map trying to tell me? The white area shows the limits of the white pages covered by that book. In the case of the Los Angeles area, there can -- and will be -- holes in that area because pieces will be covered by different telephone companies there. The yellow area is the maximum area that yellow pages for that area will cover, and again, may have holes. > Are all the listed numbers in the white area supposed to be in > white pages of the phone book? They don't seem to be. Let's not forget that people can have nonpublished numbers that you can still get from directory assistance, and in California, 40% of the telephone subscribers are unlisted which means they don't show up anywhere. > The GTE phone books where I live (near LA) show the parts of the > puzzle covering their turf, but the PacBell phone books don't. Also, > GTE has "neighborhood" directories that invade PacBell's turf. A > "neighborhood" directory is typically much thinner than a real > directory. A "neighborhood" directory is a private directory sold to companies for a lot less money than additional Yellow Pages listings in the phone book from the telephone company, but listings in those still have to be purchased separately, and this costs extra money, so the secondary books typically tend to be thinner. Also, they usually cover smaller areas (so the salesman can collect more commissions from those who want good coverage by selling them listings in multiple books). > Why? What is going on? Directory advertising means money, and as long as they can sell advertising to people, they will continue to publish them. I'm surprised we haven't seen fringe directories, say the "National Gay & Lesbian Yellow Pages" for businesses that want to solicit to those groups. Or this could be used for people to run personal ads. :) (I would have thought this was silly until I discovered American Express was advertising it's double signature travelers checks in gay-oriented newspapers and showing two men in the picture). How about the "National Amputee Yellow Pages" where companies that specialize in services for people with missing limbs can look. Etc. If you can figure out something that you can sell advertising for, chances are someone, somewhere, will create a magazine, directory or catalog to cash in on it. You or I may think it's wierd or unusual, but 50% of a niche market can be a lot more revenue than 1/2 of 1% of a major national one. [TELECOM Digest Editor's Note: A few responses are in order. First of all, in large cities like Chicago, there *are* the equivilent of 'gay and lesbian yellow pages' directories. One published covering the Chicago area is called 'OUT'. Next point: telco itself also publishes 'neighborhood phone directories'. For instance, there are a couple hundred phone books covering the greater Chicago area all of which are published by DonTech, which is the recent name for the Ameritech subsidiary formerly known as R.R. Donnelly and Company. There is the large Chicago alphabetical directory and corresponding two-part Yellow Pages. There are about thirty 'neighborhood' books, with their own yellow pages in the back of the book. These are just subsets of the larger book, extracted by address groupings within a given area of the city, and all published by telco. There are eight 'regional books' for the suburbs, broken down by near north, far north, northwest, near west, far west, southwest, south, and 'Calumet Region' (northern Indiana suburbs). Each of these books contains a couple dozen suburban communities, and each regional book is roughly equivilent to the Chicago White Pages for their particular area. Just as the large Chicago book has about thirty smaller 'neighborhood' books based on it, each of the eight regional books has its own collection of smaller 'neighborhood' (or actually, suburban town) books, usually with two or three villages or towns grouped together. For example in Skokie where I am, we are in the near north suburban regional book (white pages only, no yellow pages, but with alpha listings divided into two categories, business and residential), and we are in the book known as 'Skokie/Evanston/Morton Grove' with addresses defaulting to Skokie unless 'MG' or 'EV' is shown following the address. These little community books also have yellow pages. The other telco-published directory comes from Centel. That phone company serves Des Plaines and Park Ridge in their entireity. It also serves a small portion of Chicago on the northwest side, along with bits of Niles, Illinois and bits of the Ohare Airport complex not considered within the city of Chicago for whatever reason. They publish their own book for those towns, and Centel even has its own book for that part of Chicago it serves, entitled 'Chicago-Newscastle' for the central office involved. But all of Centel's listings also show up in the Illinois Bell/Ameritech/DonTech books in routine alphabetical order as well with no mention made they are really Centel numbers. Finally, although Lincolnwood, Harwood Heights, Norridge and unincorporated Norwood Park Township are suburbs and not part of Chicago, for whatever reason (I guess, since they are mostly surrounded by Chicago), their listings appear in the large white pages book for the city itself. There are a couple of independent (non-telco) directory publishers serving this area, and there is even something called the 'Sprint Yellow Pages' which I presume comes from that company. It seems like every few days a new book or books is dropped on our doorstep in a plastic bag. Some of these independent directories are rife with errors; some so obvious even an untrained eye like mine can scan through the pages and find mistakes. Oh yeah -- DonTech also publishes numerous 'crisscross' or cross reference directories for the entire area. I think there are about six or eight volumes of those. PAT] ------------------------------ From: glnfoote@freenet.columbus.oh.us (Glenn Foote) Subject: Re: CallerID and ANI Date: 21 Jan 1995 13:07:55 -0500 Organization: The Greater Columbus Freenet John W. Barrus (barrus@merl.com) wrote: > asked if our number had come through when the customer assistant > answered our phone. He then proceeded to recite our phone number to > me. I did not (and never have) dialed the code to turn on CallerID. > Does this mean that our phone number is being transmitted, even when > the phone company says that it isn't? Or do commercial enterprises > have a different system that always gets our phone number? I assumed > that ANI and CallerID were both blocked with line blocking. > Is there an easy way to test whether or not line blocking is working? > (I don't have any friends with CallerID boxes). > [TELECOM Digest Editor's Note: If you dial an 800 number then the called > party gets your ID whether you like it or not. There is no way for you to > block this. Regards Caller-ID, it *should* be blocked as you requested > except I think on long distance calls you now need to do the *67 whether > or not you have per-line blocking for local calls. I am not even certain > if you can block CID on interstate long distance any longer after the most > recent FCC rulings. PAT] ^^^^^^^^^^^^^^^^^^^ Can someone [Pat maybe] shed some light on WHICH rulings you are referring to here ... and why would they remove blocking on interstate long distance calls that are dialed directly? Glenn L Foote ...... glnfoote@freenet.columbus.oh.us [TELECOM Digest Editor's Note: The FCC said something recently about telcos being required to pass Caller-ID between themselves on an interstate basis beginning this year. I think the caller can still explicitly block his ID if desired with *67, but the caller cannot get careless about this and assume that since it is 'long distance' the other end won't get his ID by default. In other words, no more (or very little) 'out of area' messages. It is not so much that they 'removed blocking' as it is they said ID had to be passed along where interstate calls was concerned. I routinely now get the ID of parties calling me from all over the USA -- even California. There are still some 'out of areas' but they are getting to be fewer and fewer. And it is always worth repeating to the newbies here and others: no matter how many times you press *67 or how big of a tantrum you have on the phone with a telco service rep and her supervisor and the office manager and the president of the telco and the chairman of the board, when you dial an 800 number (or a 500/700 number using a reverse charge pin or you ask for the charges to be reversed to the called party) your number *WILL* be available to the person you are calling. PAT] ------------------------------ From: Alan Shen Subject: Re: Antenna For Cellular Phone in Bangkok Date: Tue, 24 Jan 1995 10:08:55 -0800 Organization: University of Washington On 17 Jan 1995, Roland Peter Sauermann wrote: [snipped stuff about over-loaded AMPS systesm, dropped calls ...] > Would I do better with a Magnetic mounted antenna on the roof? What would > suit me better a 3db or a 5db one? There seem to be a whole bunch of > options, some cost three times others. One guy told me the material was > different ... some antennas simply have squiggles in them others have a > thick section of a ceramic or hard plastic. I know I need to be sure I > get one for the correct phone system (we have five different types here > from 470mhz, 800, 900 to the new Digital stuff). How do I evaluate these > different antennas that run between $25-$60 and apparently have different > properties? Your best bet is to magnetic mount on the roof, right in the middle so the antenna has a grounding plane. Do not get a 5dB antenna. That's over kill in a metro area. It'll over shoot the towers. Best one's to try out is a 3dB, or a 1/4 wave antenna. Or maybe all you need is the unigain antenna. This setup should help quite a bit. Daniel Kao ------------------------------ From: Alan Shen Subject: Re: Is the Pentium Bug Really That Bugging? Date: Tue, 21 Jan 1995 10:17:41 -0800 Organization: University of Washington On Tue, 17 Jan 1995, Anthony D'Auria wrote: > Question: Does this floating point calculation bug affect system > performance? Is that why some Pentiums bottleneck? What and where > should a person contact to get the messed up chip replaced? Is it > actually worth it? Little off topic, but the bug does not affect system performance. CPU bottlenecks are only caused by how your system was designed (your motherboard). The problem has been solved. Intel will 'swap' chips with you if you have a defective one, OR the NCSA has released a software fix solution for the bug. Daniel Kao ------------------------------ End of TELECOM Digest V15 #57 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa17811; 24 Jan 95 20:41 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA07209; Tue, 24 Jan 95 14:38:31 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA07202; Tue, 24 Jan 95 14:38:26 CST Date: Tue, 24 Jan 95 14:38:26 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501242038.AA07202@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #58 TELECOM Digest Tue, 24 Jan 95 14:34:00 CST Volume 15 : Issue 58 Inside This Issue: Editor: Patrick A. Townson Universal International Freephone Numbers (John Carl Brown) Chicago 630 Plan - Such As It Is (Greg Monti) Wireless Lan FAQ For Campus Networks (Jim Williams) Looking For ISDN in Burlington, Mass (Steve Samler) Old Phone Number Format Question (Andrew C. Green) GSM SIM Format - One Solution (Robert Lindh) Re: Which Countries Have Competition (for FAQ Update)? (Eric Tholome) Re: Question on Call-Back Operators (Eric Tholome) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: John.Carl.Brown@att.com Subject: Universal International Freephone Numbers Organization: AT&T NSD, Holmdel, NJ Date: Tue, 24 Jan 1995 18:17:02 GMT I thought it would be helpful in the discussion of Universal International Freephone Numbering (UIFN) for people to see what has actually been discussed at the ITU-T Study Group 2, and what is on the table now. As background, I am one of the people representing AT&T in UIFN work in the US and at Study Group 2 in the ITU-T. I'd like to pass on two pieces of information. First, in response to: J. Oppenheimer, Producer@Pipeline.com who wrote: > Bottom line, we agree that there are better options that merit serious > consideration. > So the question for U.S. 800 Subscribers to ask their U.S. carriers > at the ITU is, why isn't this being discussed?!!! I've included a time line we've kept as to what the format proposals and discussions have been at the ITU-T Study Group 2 level. Most of this will look familiar to those who have read this thread thus far. After that is an extract from the current DRAFT recommendation E.169, specifically dealing with the case of duplicate requests for the same UIFN. As background, the procedures specify first-come, first-served. At the start-up of UIFN assignments, a window of a specified number of days is treated as the same time to allow applicants to get their initial requests in and be treated as if they all arrived simultaneously. I'd also like to note that the U.S. standards process is an open process. The State Department Study Group A coordinates the positions and contributions going forward to ITU-T Study Group 2. An Ad Hoc committee on Numbering meets more frequently to discuss the issues in depth. We've had customer participation from associations and from individual companies interested in this issue, and that participation has been welcome and encouraged. We've also encouraged multi-national customers to contact thier carriers in other countries to make their views known. Also, this process is a contribution driven process. Those with views are most effective when documenting those views, and making specific proposals as to positions or text to be deleted, added, or altered. All contributions to the Ad Hoc or Study Group A meetings are discussed. I hope this is helpful. John Carl Brown --------------------------------------------- Universal International Freephone Numbering Timeline Current study period June 1993 through May 1996 GENEVA - JUNE 1993 Study Group 2 (numbering experts group) accepted a liaison from Study Group 1 (service description experts), recognizing the need for IFS to have an easily recognizable universal global code, develop a numbering plan for this Universal IFS Number. The following is an excerpt from that liaison: ... a universal freephone number as a service feature of IFS. This feature allows a customer to be assigned a specific IFS number that would be the same throughout the world, while calls to this number, if required, can be routed to different destination accesses depending on country or point of origin. ... the legitimacy of this IFS service feature, noting increasing customer demand for such a capability, and the significantly increased use of the IFS that would result from the provision of a universal IFS number. Recognizing the current North American 800 Service code has world wide customer identification, country code "800" was reserved as the Universal Freephone indicator. A list of attributes for the numbering plan includes, but is not exclusive of: the plan should provide a substantial capacity, and should be easily recognizable. OTTAWA - OCTOBER 1993 Proposed Numbering Structures: Source: PTT Netherlands 800 0YXXXXX To be issued by Administrations in countries with a 1 digit CC 800 1YXXXXX 800 0YYXXXX To be issued by Administrations in countries with a 2 digit CC 800 1YYXXXX 800 0YYYXXX To be issued by Administrations in countries with a 3 digit CC 800 1YYYXXX Source: Telecom Denmark 800 ZYX XXXX Allocated by countries with a 1 digit CC 800 ZYY XXXX Allocated by countries with a 2 digit CC 800 ZYY YXXX Allocated by countries with a 3 digit CC Source AT&T and MCI 800 YXXXXXX[X][X] A single numbering pool, of variable length where Y=1-9, and X = 0-9 Source US West and Ameritech 2 digit CC + 1 digit Actual CC (1 digit) <8 digit subscriber number " " Actual CC (2 digit) < 7 digit subscriber number " " Actual CC (3 digit) < 6 digit subscriber number Source: Norwegian Telecom 800 - (Administrator code) - Subscriber Number Source: France Telecom 800 XXXXX or, 800 XXXXXX or, 800 XXXXXXX or, up to a maximum of 800 XXXXXXXX All of the above proposals require the international prefix to precede the call. Results of these proposals categorized the numbering formats into three groups (fixed, variable/reusable, and variable non-reusable). Further attributes agreed to: The numbers should be portable so the customers can retain their number and change their service provider. The plan should be stable and support growth. MADRID - JANUARY 1994 The debate over the UFN format continued, discussing as many as seven different formats. Preserving national freephone numbers within a UFN as well as the administration of the numbers compounded the problem of agreeing to any specific format. It was suggested at this meeting that a neutral body administer these numbers, under consideration is the ITU. All participants were asked to only consider two formats for the next meeting; a variable six to eight digit length, or a fixed eight digit length. GENEVA - MARCH 1994 Source: AT&T 800 XXXXXXX (7 digits) Existing customer's seven digit freephone subscriber numbers are retained as the subscriber number of the UFNs for one year. After the one year period all seven digit freephone subscriber numbers that are not identified to be used as the subscriber number of UFNs for IFS would be included in the UFN resource pool and available for assignment. Source: Remaining Representative: 800 XXXXXXXX (8 digits) One representative (Sweden) conclusion for supporting eight digits: Since the seven digit fixed format doesn't give all the countries existing countries customers the ability to either retain or embed their existing numbers in an equal and fair basis, and doesn't offer any way of expanding the capacity, the only alternative left is the eight digit fixed format. A fixed format was agreed to with bracketed text for seven or eight digits. Work will continue on administrative issues. OSLO - JULY 1994 Approximately 30 countries presented a single contribution supporting an eight digit fixed format. The US was the only representative supporting a seven digit format. Acknowledging the need to continue the work, the U.S., restated their support for seven digits but agreed to work on the remaining portions of the document, assuming the format would be eight digits in length. Start up procedures, in particular conflict resolution procedures for that time were debated. The representative from the U.K., offered partitioning the subscriber number with specific leading digits: 800 1Z XXXXXX For further study 800 2Y XXXXXX 6 digit subscriber number migration space 800 3Y XXXXXX 6 digit subscriber number migration space 800 4 XXXXXXX 7 digit subscriber number migration space 800 5Y YYYYYY New 8 digit number 800 6Y YYYYYY " " 800 7Y YYYYYY " " 800 8Z ZZZZZZ For further study 800 9Z ZZZZZZ For further study 800 0Z ZZZZZZ For further study WASHINGTON DC - OCTOBER 1994 (joint experts editing team) To try to progress the work, a small group of representatives met to edit the document. This will be presented to the next meeting in Geneva, December 1994. This document assumes a fixed eight digit subscriber number. The numbers will be assigned on a first come first served basis with no preallocation of space. Priority will be given to those subscribers who are embedding their existing freephone subscriber number. Embedding can be requested by adding trailing or leading filler digits. For example: Subscriber A's 7 digit existing number is 234 5678 Embedding by adding leading filler digits: UIFN requested could be 800 X2345678 Embedding by adding trailing filler digits: UIFN requested could be 800 2345678X When two or more applicants request the same number, the Registrar will communicate with the applicants and notify them of the duplicate request and attempt to resolve the duplicate request by having the applicant(s) change their filler digits to eliminate the duplication. GENEVA - DECEMBER 1994 The meeting agreed that the edited output of TD 1/2-127 (Washington meeting) should be used to advance the work at the meeting and to incorporate any points it thought as appropriate from E.IFSNUM. The TSB had assigned temporary number E.169 to E.IFSNUM. ---------------------------------------------- end of timeline Extract from draft recommendation E.169: Annex A A1 Duplicate Requests 1 The purpose of these procedures is to resolve UIFN conflicts, e.g., when more than one applicant applies for the same UIFN at the same time. 1a) The registrar should advise only the involved applicants when problems are identified, and provide advice to them and cooperate in problem resolution. 1b) The registrar shall give priority to the applicants embedding their subscriber's existing entire national FSN [Freephone Subscriber Number], this is known as priority assignment. 2 The specific procedures are: 2a) The applicant can only request and receive priority assignment based on the intent to embed the entire existing FSN. The embedding can only be requested by adding trailing or leading filler digits to the entire existing FSN, in the manner illustrated below. For example: Subscriber A 7-digit FSN is 234 5678 Embedding by adding leading filler digit: UIFN request 800 X2345678 Embedding by adding trailing filler digit: UIFN request 800 2345678X Subscriber B 6-digit FSN is 654 321 Embedding by adding leading filler digits: UIFN request 800 XX654321 Embedding by adding trailing filler digits: UIFN request 800 654321XX Embedding by adding one leading and one trailing digits: UIFN request 800 X654321X where X = 0-9 Similar principles apply for IFS subscribers with fewer than 6 digit FSNs 2b) When two or more applicants request the same UIFN, and only one of applicants request a priority assignment, the registrar will assign the UIFN to the applicant which requested priority assignment. The registrar will then assign the stated alternative choices, or solicit alternative choices, to the other applicants. 2c) When two or more applicants requesting the same UIFN based on their entire FSN, request priority assignment, the registrar will communicate with the applicants and notify them of the duplicate request and attempt to resolve the duplicate request by having the applicant(s) change their filler digits to eliminate the duplication. During this procedure, the registrar will inform the applicants that they are in contention for their selected UIFN. Identities of other applicants involved in the contention will only be divulged with the consent of all the involved applicants, for the purpose of resolving the contention. 2d) When two or more applicants requested the same UIFN, and none have requested priority assignment, the registrar will communicate with the applicants and notify them of the duplicate request and attempt to resolve the duplicate request by having the applicant(s) choose an alternate UIFN if applicable. During this procedure, the registrar will inform the applicants that they are in contention for their selected UIFN. Identities of other applicants involved in the contention will only be divulged with the consent of all the involved applicants, for the purpose of resolving the contention. 2e) Absent agreement to resolve the duplicate request with the applicants the registrar will, after 15 days, do a random selection to resolve duplicate request. The applicants not receiving the number will be assigned one of their alternate choices or the registrar will solicit another choice, if not provided. -------------------------------------------- End of E.169 extract. ------------------------------ Date: Tue, 24 Jan 1995 12:04:57 EST From: Greg Monti Subject: Chicago 630 Plan - Such As It Is A story in the January 23, 1995, issue of {Communications Daily} says that an Illinois Commerce Commission hearing examiner has "endorsed" a plan to create the 630 area code to relieve 708. Presumably, the endorsed plan is the overlay that has already been discussed because the story notes that it wouldn't require existing customers to change their telephone numbers. The story then says, cryptically, that the plan also would "create 'permissive and mandatory dialing arrangements' that wouldn't jeopardize new competitors". And that the City of Chicago "opposed the stipulation on ground that eleven-digit rather than seven-digit dialing requirement was 'onerous' and might predetermine similar fate for 312 area code where customers are used to seven-digit intraLATA calls." --------------------- Monti interprets shakily: Isn't this a little late for "endorsements" with the new code already created? Callers between the three Chicagoland area codes will need to dial eleven digits to reach local subscribers in the other two codes, which is the same as now. Allowing seen digit dialing between 312 and 630 would require that the prefix codes used in 630 not be usable in 312, which would exhaust 312 faster. Allowing seven digit dialing *within* your own area code may be -- or may not be -- permitted. Others who'd like to try their hands at translating this story into English are welcome to do so. Greg Monti, Tech Mgr, FISPO, Distribution Division National Public Radio Phone: +1 202 414-3343 635 Massachusetts Av NW Fax: +1 202 414-3036 Washington, DC 20001-3753 Internet: gmonti@npr.org ------------------------------ Date: Tue, 24 Jan 1995 09:50:19 -0800 From: routers@halcyon.com Subject: Wireless Lan FAQ For Campus Networks 1. What Bandwidth is available for campus area Wireless LANS? Ans. 2Mbps 2. What distance's can they do? Ans. From 3 miles to 10 miles (line of site) 3. Are they secure? ANS. Spread Spectrum Radio technology is Proven and Secure. Options are available for Encryption ie 64 bit DES chip. 4. What type of management is available? ANS. SNMP MTll compliant. 5. Do they reguire a FCC license? ANS. No 6. For Large installations is there support for on site surveys and installations? ANS. Yes Airlan offers a S.W.A.T. Team of Professional field engineers. 7. How about support after installation? ANS. Toll free support is always available for all Airlan products 8. Is this technology World Wide? ANS. As of today it is available in The USA, Canada, and South America. 9. Can this technology be used to connect inside of Buildings PC's, Desk Tops, and Laptops, at the same 2Mbps? ANS. Yes it supports all the above at 2Mbps, No matter what the size (5 doors, to 4 floors, to 5 miles or more. 10. What type of Lap Top adaptors are available? ANS. Parallel/Pcmcia. 11. Does the inside technology support Roaming? ANS. The Airlan Access point (Hub) creates a 50,000 Square foot "cell" area of connectivity, Access cell to Access cell maintains a seamless connectivity to a network. 12. What networking operating Systems (NOS) is the Airlan compatable? ANS. Airlan is compatable with all Major network operating systems (NOS) including all versions of Netware and Netware-life, Microsoft-Lan Manager, 3 Com 3 Com+, Dec Pathworks, Banyan Vines, IBM Lan Manager, and Artsoft Lantastic 13. Can more that one Remote Bridge be connected to a single Host Bridge? ANS. Yes with a Omni attenna, You can connect more than one Remote Bridge with an agregate of 1.544Mbps. 14. How difficult is the Airlan Bridge Plus to install? ANS. Menu driven diagnostic Software for the installation and alignment of attenna's make Airlan/Bridge/Plus easy to setup, and SNMP makes it easy to use. 15. How does the Airlan compare in cost to a T-1 circuit? Ans. Airlan/Bridge/Plus costs less than a T-1 bridge, and performs up to 40 X faster than leased lines. For more information contact: Jim Williams 1-800-837-4180 ------------------------------ Date: Tue, 24 Jan 1995 13:00:03 EST From: Steve Samler Subject: Looking for ISDN in Burlington, Mass Does anyone have any information on ISDN from the Burlington (Mass) CO. We've been told that since we are two miles from the switch, we can't get ISDN. True? Anyone know when this might be available? ------------------------------ Date: Tue, 24 Jan 1995 10:20:05 CST From: Andrew C. Green Subject: Old Phone Number Format Question The following question appeared recently in the Old Time Radio Digest mailing list, and seems tailor-made for an answer from this forum. Anyone care to comment or reminisce? Date: Mon, 23 Jan 1995 16:17:25 -0500 From: "Richard M. Weil" To: otr@airwaves.chi.il.us Subject: PaperMate Ball Point Pens I was listening to a 1953 episode of The Hall Of Fantasy last night, and there was an ad for Philco TVs being sold through a store called CET in Rockford, Illinois. The main store was in Chicago. The pitchman promised a FREE PaperMate Ball Point pen, without obligation, to anyone who called the store to set up an appointment for a salesman to visit your home to give you info about Philco TV's. The pitchman said the new pen was "sweeping the nation", ... "a $1.59 value!" For those interested, and maybe the offer still holds (hee hee), the number for the store in Chicago was MOhawk 4-4100. The number for the store in Rockford was curiously 8-22-47. I'm too young to know anything about 5 digit phone numbers. Is that how it was back then in small cities? I'd also be curious to know if anyone remembers this store and if it's still around. (I could call directory assistance myself, but this is more fun.) I'd also like to know if a ball point pen was such a novelty that you'd let a salesman into your home for a free one, or was it the TV, or both? Andrew C. Green (312) 266-4431 Datalogics, Inc. Internet: acg@dlogics.com 441 W. Huron Chicago, IL 60610-3498 FAX: (312) 266-4473 [TELECOM Digest Editor's Note: CET = Central Electric Television. They were a big distributor of television sets in the 1950's here. Both television and 'throw away when used' ball-point pens were new and unusual items in those years. Pocket calculators had never been heard of. When I was in high school, 1956-60, the school gave us the 'option' of using ball-point pens instead of fountain pens, although the latter were preferred. Desks in school classrooms had a little holder near the top for the bottle of ink used to fill the little rubber bladders inside fountain pens. The schools and all progessive educators of the era preferred that children use fountain pens, as it was believed they helped develop better penmanship. Television sets were becoming more common by then; maybe a third to half the households in the USA had one, mainly if the owner lived in a large city where television stations could be received. A few people had television sets as early as 1946-47. Our family got one in 1949; it had a two or three inch screen that was totally round with a very large magnifying glass attachment which hooked on the front of it. It was in fact a Philco (for anyone interested, that was our friends at Phillips) and stood in a large cabinet about four feet tall and two feet wide. We got three channels on it, one being WGN Channel 9; and there were two others. MOHawk was a central office in Chicago from shortly after the turn of the century. Now it is known as 312-664, and then as now serves the near-north side of the central Chicago area. In addition to CET, which was located on Chicago Avenue at Halsted Street (now for thirty plus years the site of a housing complex operated by the Chicago Housing Authority known as 'Cabrini-Green Homes'), other notable subscribers on the MOHawk exchange included the Chicago Rapid Transit Company, MOHawk-4-7200 for administrative offices, (7000 for transit information) which in 1947 became the Chicago Transit Authority. They still use 312-664-7200 for Transit Authority offices, but 836-7000 for general transit information throughout northern Illinois in a consolidated phone room operated jointly by all the commuter railroads and local/suburban bus lines. Since CRT Company had that number as of about 1921, I guess that makes 664-7200 one of the longest continuing subscribers on the same number; 74 years of it now. Five digit numbers were common in communities which had automatic dialing systems in those days but only one exchange in the community. Since the exchange name was always the same, it was assumed when dialing. In your example you parsed the number incorrectly. It was 8-2247, or to be complete about it, ROckford-8-2247. Gary, Indiana had the same kind of setup. The company town named after William Gary, president of US Steel at the turn of the century had several exchanges, but they were all TUrner, as in TUrner 2,3,4,5,6 or 7. Therefore five-digit dialing (or five digit asking of the operator, prior to 1955) was allowed in the form of 2-xxxx through 7-xxxx. Someone once asked who was Turner ... he was a vice-president of US Steel about the same time, and highly revered for his contributions to the civic life in Gary. In the early 1920's, the United States Supreme Court required US Steel to divest itself of the Gary Municipal Corporation. But some things did not change; the town name was retained and the phone exchanges continued to be Turner. Today they are 219-882 ... 887. Why yes ... ballpoint pens were quite a novelty in 1953, and the better quality ones were quite expensive, in the $7-10 range. 'Cheaper' ones, like the free gifts from Central Electric Television ranged in price from a dollar to a dollar and a half. But don't worry, they made out like bandits since the television sets sold for several hundred dollars each; three-inch round screens which looked like oscilliscopes. CET had as a commercial, a jolly man singing "Cee Eee Tee .... for television! (and concluding) Mohawk four, four one hundred!" They've been out of business for about thirty years now. PAT] ------------------------------ From: etxlndh@eos99.ericsson.se (Robert Lindh) Subject: GSM SIM Format - One Solution Organization: Ericsson Date: Tue, 24 Jan 1995 14:03:04 GMT At least one GSM-operator here in Sweden (Europolitan) automatically gives you 2 SIM-cards per subscription, one small and one full-size. Originally, the incoming calls go to the cellular phone that have the small card inserted. If you want to change that, you insert either one of the cards in a cellular phone and use a code ("333") to switch incoming calls from the card now receiving them to the other card. ------------------------------ From: tholome@dialup.francenet.fr (Eric Tholome) Subject: Re: Which Countries Have Competition (for FAQ Update)? Date: Mon, 23 Jan 1995 22:36:14 +0200 In article , dleibold@gvc.com (Dave Leibold) wrote: > As the FAQ update is under way, one section dealt with the various > countries that have introduced telecom competition in some form or > other. I've heard of a European Community directive to the effect that > its member countries are to open up telecom markets by a given date. > Competing local networks are also emerging (including UK, US > developments). Indeed, competition will be introduced no later than 1998 in most European countries (except in countries that specifically asked for a delay). Actually, we need to be more precise: for instance, we tend to think that the French public telecoms are still under a monopoly, which is almost true, except for international and mobile communications, which have long been open to competition (and there has indeed been competition for quite some time). I don't recall what exactly will be opened to competition in 1998. I believe the story says that all services will, but not infrastructures, though many countries are willing to open *everything* to competition by 1998. Can someone be more precise on this point? Otherwise, I'll have to look up my archives. Hope this helps! Eric Tholome 23, avenue du Centre tholome@dialup.francenet.fr 78180 Montigny le Bretonneux phone: +33 1 30 48 06 47 France fax: same number, call first! ------------------------------ From: tholome@dialup.francenet.fr (Eric Tholome) Subject: Re: Question on Call-Back Operators Date: Mon, 23 Jan 1995 22:36:10 +0200 Pat wrote: > [TELECOM Digest Editor's Note: Another problem you did not mention is the > cost of your call to the callback center. That call has to supervise also, > you see, and that costs you some amount of money. Add that to whatever you > pay for the callback part of the connection and let me know how much less > expensive it *really* is. Part of the gimmick that makes callback services > so inexpensive is that you usually do not have to pay for a call to the > USA. You dial your number and hang up without it answering; thus no charge > for that part of the call. Why do you think AT&T was so out of joint on > this for quite awhile? Hey, if people think they can pay for a supervised > call to the USA (and enter a password, eliminating random ringbacks) and > still get by cheaper than via straight calling through their PTT, whoever > it is, then let me know ... I may start a callback service of my own. Well, let me give you some figures: France Telecom's rate to call the U.S.A. varies between $0.95 and $1.27/minute depending on the time of the day. My ATT calling card isn't much cheaper, especially because of the $2.50 initial charge. My callback operator does not require a minimum monthly charge, nor does it impose a monthly fee. It charges $0.66/min at any time for the same call. You're right that I'm also charged $0.14 for my call to the callback center. Moreover, my callback call is timed from the moment I get the American dial tone (only if the call is answered), which adds another $O.15 (approximately). Still, if the call lasts a minute or more (which is almost always the case, even for calls that reach an answering machine), my callback service is a good deal; a very good deal. I called an American friend last month and we stayed 70 minutes on the phone. I saved around $25 thanks to my callback operator. Not bad, right? To be totally honest, I must add that my callback operator times the call in 30 second periods, whereas France Telecom uses circa 7.5 second periods. Who cares? The service is so much cheaper. I'm looking forward to signing up for your new callback service (still to come), which will have to beat mine! :-) Eric Tholome 23, avenue du Centre tholome@dialup.francenet.fr 78180 Montigny le Bretonneux phone: +33 1 30 48 06 47 France fax: same number, call first! ------------------------------ End of TELECOM Digest V15 #58 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa19137; 24 Jan 95 22:59 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA13570; Tue, 24 Jan 95 17:42:17 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA13563; Tue, 24 Jan 95 17:42:15 CST Date: Tue, 24 Jan 95 17:42:15 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501242342.AA13563@delta.eecs.nwu.edu> To: telecom Subject: TELECOM Digest V15 #60 TELECOM Digest Tue, 24 Jan 95 16:40:00 CST Volume 15 : Issue 60 Inside This Issue: Editor: Patrick A. Townson Re: North Korea Holds US Representative Over $10K Phone Bill (Alan Shen) Re: Long Distance Caller ID (ludden@indirect.com) Re: Privately Owned Cables on Public Utility Poles (Mark Fletcher) Re: Cellular Fraud: How Much of it is Real Money? (Robert Levandowski) Re: Internet Mail With Half the Address? (Larry Drebes) Re: Where to Find Nice-Looking Phones? (Bill Garfield) Re: Using U.S. Modem in Israel (Supak Lailert) Re: 800 Numbers From Overseas (Kimmo Ketolainen) Re: Telephony Card/Software Needed (John Lundgren) Re: Telephony Card/Software Needed (Dale Wooden) Re: Telephony Card/Software Needed (Harold Buehl) Re: Planning to Purchase a Voice Mail System (Greg Habstritt) Re: Planning to Purchase a Voice Mail System (Bill Garfield) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: Alan Shen Subject: Re: North Korea Holds US Representative Over $10K Phone Bill Date: Tue, 24 Jan 1995 10:36:17 -0800 Organization: University of Washington On Thu, 19 Jan 1995, Paul Robinson wrote: > In Jack Anderson's column today, he reports that when Representative > Bill Richardson (D-New Mexico) tried to cross the DMZ (Demilitarized Zone) > between North and South Korea, with the casket carrying the remains of > Chief Warrant Officer David Hilemon, North Korean officials refused to let > him cross until the bill was paid. > In Cash. > $10,000 is about eight times North Korea's per capita yearly income. Why didn't they just bring a satellite phone with him? Or was he out of range? $10K for 23 calls ... is a LITTLE too much for me ... Daniel Kao ------------------------------ From: ludden@indirect.com Subject: Re: Long Distance Caller ID Organization: Internet Direct, indirect.com Date: Tue, 24 Jan 1995 18:51:56 GMT Paul J Zawada writes: > I've had a couple of interesting conversations with the folks at > Ameritech regarading the delivery of interstate Caller-ID information. > I have a question or two regarding the availablity of the above service, > so let me summarize and pose a question or two to the readers of TELECOM > Digest. > How useful is Caller-ID in other parts of the country? Do other folks > that have the service get "OUT OF AREA" for 99.5% of their interstate > calls, or am I just in the wrong city to get that info? I'd be > especially interested to hear how well it works in the Chicago area > since Chicago is also served by Ameritech Illinois. US West has offered Caller-ID in the Phoenix Metro Area for over a year now, and I have been quite pleased with it. All non-cellular local calls either have display a name and number, or PRIVATE NAME for blocked calls. I recieved a note from US WEST in December saying that they would have long distance Caller-ID in place by summer 95, as well as having Caller-ID work when a call-waiting call comes in (so you can decide whether to answer or not). Lee ------------------------------ Date: Tue, 24 Jan 1995 13:55:52 -0800 From: mfletch@ix.netcom.com (Mark Fletcher) Subject: Re: Privately Owned Cables on Public Utility Poles > In many areas the local cable company has rights to access > all pole space (for a small fee per year per pole, as a rule). > I've found the cable operators to be more that willing to construct > and maintain private fiber optic cables, for reasonable costs. > This is the very simplest solution I've found, they have all the > rights, equipment and contractors in place. > You should also consider fiber due to its longer life and lower > problem level, e.g. lightning immunity, etc. > There are also contractors who are willing to take on such a project > on a turnkey basis, including negotiating access rights. They can > be located by contacting a few of the larger contractors, such > as Henkels and McCoy, and others out of industry directories. > You might want to consider the use of a experienced consultant for > this project. They know who to approach and what to consider. We tried a few contractors who "knew the ropes" on who to contact, but their cable prices were through the roof! The cable company is an interesting route though ... It looks like T1 may be an answer, and cost effective from the RBOC, and TELCO Inc. has an interesting product that links direct with the Northern Telcom Meridian for 2500 or Digital sets. Getting close to the answer! Thanks all! ------------------------------ From: rlvd_cif@uhura.cc.rochester.edu (Robert Levandowski) Subject: Re: Cellular Fraud: How Much of it is Real Money? Organization: University of Rochester - Rochester, New York Date: Tue, 24 Jan 95 22:05:43 GMT > is 'worth'. If all you and Paul are saying is that people or companies who > have things stolen from them occassionally inflate the value of what was > stolen for reasons of their own, i.e. insurance payoff, then I would agree > with you. Yes, they do that. If they report what they sold as worth > one dollar and what was stolen as worth two dollars (for the same quantity > or product, etc) then that is wrong. If they report what was stolen as > worth the same amount as that which was sold, then I don't think that is > wrong. > To put it another way, consider a large supermarket in a city like Chicago. > Jewel Food Stores tosses a huge amount of perishable stuff out in the > dumpster each week when their new stock comes in. Milk with an expiration > date only two or three days away. Loaves of bread which have been around > awhile or which got banged up and the wrapping slightly sliced open by > accident in transit. Entire cartons of eggs where one egg got broken. Boxes > of breakfast cereal smashed up in transit. In other words, perfectly > good food, but American consumers are picky people. Homeless or other poor > people with sophistication or 'street-smarts' know exactly what day, or > rather night of the week each Jewel store in the area gets its deliveries > and within minutes or maybe an hour what time to go hit those dumpsters > and clean them out. Granted, you can't be too picky about variety; you > can have a dozen boxes of corn flakes because they threw out the whole > carton when the box on top got sliced open accidently by the stock clerk > opening the carton, but don't look for any Raisin Bran this week. And in > the middle of winter, all those gallon jugs of milk are just fine, but > in the middle of the summer if they've been out there in the dumpster more > than an hour or so, you don't want them ... otherwise, everything is fine. > So since a grocery store is going to toss out all of its perishables when > a new order comes in, and since they never manage to sell it all, and > since the price tag for the item is probably five times higher than what > they paid for it, what real problem is there if someone wants to shoplift > a little right from the store? Right? Now substitute cellular carriers > and/or telcos and/or software writers. If sneaking something out without > paying is cool, then fine. If 'shoplifting' is wrong, then it is wrong. PAT] This is an interesting analogy, but it's not quite what the original poster was trying to say, I think. To expand: If said supermarket were to suffer from a crime wave, and a certain amount of milk were stolen, but no more milk than would normally be discarded in any given week as you described, what if the supermarket then turned around and announced it would increase its milk prices to make up for its losses? Should it figure the value of the lost milk at full retail, or at wholesale? It would not have sold the milk; if they recover the full retail price, they would end up making more money than they would have if the crime had not occurred in the first place. Persomally, I don't think that's reasonable, from the customer's point of view. When you move from supermarkets to cellular carriers, an additional factor comes in. The cellular system transmits its authentication in the clear, making it relatively easy for modern crooks to commit cellular fraud. I've seen lots of people here mention this, and it seems the carriers must have known this weakness. To go back to the analogy, would the supermarket customers be happy about rate increases if they found out the store had knowingly left the back door unlocked and unguarded every night, at the time the milk thefts occurred? I see the point as being: the cellular customers are not responsible for the theft of their billing codes. They exercise reasonable caution in protecting the company from fraud; it is the system that is at fault and it's not reasonable to ask people not to use their phones. In this case, it's bad enough to be charged for theft beyond your control, and even worse to be charged based on theoretical costs that will net the company more money than they'd get if there were no crime to start with. Rob Levandowski Computer Interest Floor associate / University of Rochester macwhiz@cif.rochester.edu [TELECOM Digest Editor's Note: I am reminded of several years ago when I had a neighbor by the name of Mike Polonski and his wife. They were an older, retired couple. Not being able to get by on what Social Security paid them as a married couple, they decided to get a divorce -- after fifty years of marriage! -- so that each of them would begin getting their own check each month, in a total amount higher than what they gpt as a married couple. None the less they continued to live together, they were simply divorced in the eyes of the law is all. We would get together for dinner at least once a week, sometimes more often. Time and again, at dinner in their home, we had only the finest meats, vegtables, and other foods. Where do you do your shopping, I asked ... Mr. Polonski's answer shocked me: the Carnegie Safeway dumpsters every Tuesday about midnight, he said. He saw my startled look and explained what I said in my previous message. Every Wednesday morning at 4:00 am the semi-trailer truck full of stock for the store would show up. About the same time the refrigerator truck would show up with milk, eggs, butter, ice cream, etc. Then soon the 'bread man' would be there. In anticipation, the stock clerks late Tuesday night began cleaning out the old stuff from the shelves; anything with an expiration date *even two or three days ahead* had to be disgarded. The store knew the stuff was still good, but they figured if someone had milk at home with the current day or the day before as the expiration and they got sick for some reason they would blame in on the 'spoiled milk' and sue the store. It was easier to dump it all. You would not believe all the stuff they throw out ... I know I did not believe it until about a week later Mr. Polonski came to my home and brought three large shopping bags with him. "Here," he said, "I did your shopping for this week." He had already taken home three or four bags for himself, and these were mine. Milk, peanut butter, crackers, bread, several boxes of macaroni and cheese, hamburger helper, two packages of pre-sliced balogna (this was in the winter; I caution you against taking the meat or dairy stuff in the summer!) and more. Everything had some minor thing wrong with it; usually it was near the 'must be sold by' date. Some boxes were smashed. A box of 48 Milky Way candy bars where two of the bars on the top row had been sliced in half accidentally with a box-cutting knife. I asked him if he ever had the nerve to take something he did not want back inside the store to the courtesy counter to get a refund and tell them he 'lost his reciept' ... he said no, but he knew of one older lady who 'did it all the time' until Safeway finally slapped her hands for it and told her to stay away from the store and the dumpsters. PAT] ------------------------------ From: ltd@netcom.com (Larry Drebes) Subject: Re: Internet Mail With Half the Address? Date: Tue, 24 Jan 1995 13:49:43 GMT Try Four11. It's free to search and add your own info. It has both a Web interface ( http://www.Four11.com ) and an e-mail interface (free@four11.com). ------------------------------ Subject: Re: Where to Find Nice-Looking Phones? From: bill.garfield@yob.com (Bill Garfield) Date: Tue, 24 Jan 95 12:10:00 -0600 Organization: Ye Olde Bailey BBS - Houston, TX - 713-520-1569 Reply-To: bill.garfield@yob.com (Bill Garfield) ophidian59@aol.com (Ophidian59) in writes: {some deleted} > While on the subject of phones, I'd really like to find one of those > old yet very mod (e.g. 60's) British phones with the dial and the > hook-switch on the bottom. Anyone? Wasn't this the "ERICO" phone of that era? I recall they were very modernistic-looking for the day, but the dial and switchook contacts were prone to cause static after a few months use and the carbon button mic tended to get packed easily from overzealous hangups. :-) Neat phones, but a maintenance nightmare. Ye Olde Bailey BBS Zyxel 713-520-1569(V.32bis) USR 713-520-9566(V.34/FC) Houston,Texas yob.com Home of alt.cosuard ------------------------------ From: lailert@ucssun1.sdsu.edu (Supak Lailert) Subject: Re: Using U.S. Modem in Israel Date: 24 Jan 1995 05:25:12 GMT Organization: San Diego State University, College of Sciences Jeremie Kass (kass@tacout.army.mil) wrote: > I am interested in using the modem I use in the U.S. while I am in > Israel. Is there any technical and/or legal problem in doing this? > Also, what kind of telephone jacks are used there? This will be > connected to a residential line, so will it be the same RJ-11 jack as > here? I've had a problem of using a US modem in other countries. I used SupraExpress 144i modem in Thailand and it doesn't detect the busy signal so that automatic redialing is impossible. The answer from Supra tech support is that "Your modem is adjusted to detect US busy signal. The UK busy tone used in Thailand is different. They are faster. There is no way to adjust the modem to detect the busy signal." (Thailand uses UK telephone standard). Is this true? Supak Lailert -- MBA (IS) Program, San Diego State University lailert@rohan.sdsu.edu lailert@aol.com ------------------------------ From: Kimmo.Ketolainen@utu.fi (Kimmo Ketolainen) Subject: Re: 800 Numbers From Overseas Organization: Turun yliopisto - University of Turku, Turku, Finland Date: Tue, 24 Jan 1995 12:44:25 GMT I seem to have terrible trouble with accessing the 1 800 numbers from Finland, using Telecom Finland (code 990). About every second try gives me the usual error message "the number is not in use" instead of "access to the 800 number you have dialed is not free of charge outside the United States. If answered, you will be charged international direct dialing rates for this call. If you do not want to proceed with this call, please hang up now." Luckily I have a redial button. I called this week one of the other international operators, Finnet (99= 9) and was told that they are planning to offer similar service. Kimmo Ketolainen University of Turku home +358 21 237 8227 Kimmo.Ketolainen@utu.fi shoe +358 40 500 2957 FIN-20540 Turku http://www.utu.fi/finland.html work +358 21 262 1496 ------------------------------ From: jlundgre@kn.PacBell.COM (John Lundgren) Subject: Re: Telephony Card/Software Needed Date: 24 Jan 1995 00:08:00 GMT Organization: Pacific Bell Knowledge Network Paul Garfield (garfield@vanilla.cs.umn.edu) wrote: > I've seen a couple similar questions posted but haven't seen an > answer. Please post the answer. I'm looking for cards for IBM PCs > that can handle phone calls. I need to be able to program how the > call is handled (when and what to play and record, what to do with > touch tone presses, etc). All I've seen is things for one line. I > want to start with about four lines but have the ability to upgrade to > perhaps 24, so I need multiple (four or eight) lines per card. What > are good vendors for this and where can I go for information? Thanks. Try Periphonics for a vendor. John Lundgren - Elec Tech - Info Tech Svcs Rancho Santiago Community College District 17th St. at Bristol \ Santa Ana, CA 92706 jlundgre@pop.rancho.cc.ca.us\jlundgre@kn.pacbell.com ------------------------------ From: Dale Wooden Subject: Re: Telephony Card/Software Needed Date: 24 Jan 1995 15:53:01 GMT Organization: NB*Net > answer. Please post the answer. I'm looking for cards for IBM PCs > that can handle phone calls. I need to be able to program how the > call is handled (when and what to play and record, what to do with > touch tone presses, etc). All I've seen is things for one line. I > want to start with about four lines but have the ability to upgrade to > perhaps 24, so I need multiple (four or eight) lines per card. What > are good vendors for this and where can I go for information? Thanks. Pika Technologies Inc has such a card, the V12. It is programmable and comes in several configurations. you can contact Rahul Virmani at (613) 591-1555 or rahul.virmani@pika.ca Hope this helps. We have had very good success with this card in our own products and have been very pleased with the service. Dale Wooden ------------------------------ From: hbuehl@dsm1.dsmnet.com Subject: Re: Telephony Card/Software Needed Date: 23 Jan 1995 22:46:49 GMT Organization: Des Moines Internet Reply-To: hbuehl@dsm1.dsmnet.com In , garfield@vanilla.cs.umn.edu (Paul Garfield) writes: > I've seen a couple similar questions posted but haven't seen an > answer. Please post the answer. I'm looking for cards for IBM PCs > that can handle phone calls. I need to be able to program how the > call is handled (when and what to play and record, what to do with > touch tone presses, etc). All I've seen is things for one line. I > want to start with about four lines but have the ability to upgrade to > perhaps 24, so I need multiple (four or eight) lines per card. What > are good vendors for this and where can I go for information? Thanks. There are a number of PC based solutions for being able to take multiple line analog and digital trunks, do stuff such as play voice scripts and capture DTMF Digits, generally referred to as VRU or to actually recognize the the caller's voice, generally referred to as Voice Recognition. Natural MicroSystems of Natick MA and Dialogic of Parsippany NJ are a couple of names that leap to mind, although there are certainly others. Go to Barnes and Noble, or one of the Book Superstores and pick up a copy of Computer Telephony Magazine. It is like a toy catalog of all of the new CTI hardware and software. Harold Buehl Croyle & Associates Des Moines, IA ------------------------------ From: gregicg@cadvision.com Subject: Re: Planning to Purchase a Voice Mail System Date: 23 Jan 1995 20:45:48 GMT Organization: CADVision > We purchased a system from Phoneby which was bought out by VMX. The > system works, but has less features than Pacx Bells's system. We > tried to upgrade it a year or so ago, but they wanted an arm and a leg > to put a larger hard disk in it. The hard disk is a regular Maxtor > MFM disk drive, something like 170 MB. They wanted thousands to > upgrade it. The only thing special is that it's formatted in a > proprietary format. Alot of the major manufacturers go about their upgrades in this way. Pretty well EVERY Voice Processing manufacturer uses regular off-the-shelf components, and they are all PC-Based (whether they like to admit it or not.) Some claim "stand-alone" but that just means they sell their components under their own name and proprietary nature, and charge crazy amounts of dollars for it. They often install a 200+ MB HDrive into their systems, but only format a certain percentage of it depending on how much you pay for. Then, when you upgrade, they send out a technical specialist who inserts a 5 1/4" floppy and runs a little UPGRADE program that basically formats a larger part of the drive (as they put it, "unlocks more memory". So, you end up paying hundreds of dollars for something that should really have no cost involved at all. That is one of the biggest rip-offs in Voice Processing today. greg@cadvision.com Greg Habstritt Intellitech Communications Group Calgary, Alberta, Canada ------------------------------ Subject: Re: Planning to Purchase a Voice Mail System From: bill.garfield@yob.com (Bill Garfield) Date: Tue, 24 Jan 95 12:10:00 -0600 Organization: Ye Olde Bailey BBS - Houston, TX - 713-520-1569 Reply-To: bill.garfield@yob.com (Bill Garfield) Paul Hebert (paul_hebert@powershare.markem.com) wrote: > My company is doing research for selection of a voice mail system. We > have presentations scheduled with Octel and Centigram. Would anyone > have some technical or user related insight into these systems? We > have an NEC 2400 switch. Any interface issues we should be aware of? I've had an OCTEL "Aspen" (mid-sized) system in service since 1990 (nearly five years now) with absolutely -ZERO- downtime. It is fully integrated with my Mitel SX2000SG pbx and just keeps working and working. I originally purchased a service contract from OCTEL but finally let it go as they were about like the Maytag man... :-)) I've had them out once, to replace a disk drive. My Octel Aspen system has 20 ports and serves approx. 800 users. Much to Octel's chegrin, I'm still at the original installed software rev level, 8.45.:-) My system is running four 80-meg drives and is still at less than 1/2 capacity. Small mailbox sizes and short save times help that alot. I typically allow each user a max of 20 two-minute msgs with a "new" message hold window of 21 days and a save/archive window of seven days, tho I do make an occasional exception -- just don't let it become a filing cabinet nor an attic. Make that a -POLICY- and your life as System Administrator will be much more pleasant. Run monthly subscriber usage reports to keep tabs on your big "exception" mailbox users as they can bring your disk space to its knees if they abuse the "save" priviledge. Force passwords to six digits, minimum. Beware that "auto attendant" can become a sneak path for toll fraud with any voicemail system. Otherwise, it takes a licking and keeps on ticking. Expensive? Yes. Worth it? You tell me ... As an aside, my Octel/Aspen system sits in a 68-degrees/temp-stable environment and is powered through a Liebert PDU (clean power), plus has a sturdy industrial grade UPS behind it. That may contribute to the good results thus far achieved. I know if the need arose that I'd sure buy another one in a heartbeat. Bill Garfield The pbx/datacomm guy Panhandle Eastern Corp, Houston NYSE: PEL America's Natural Gas Transportation Company Ye Olde Bailey BBS Zyxel 713-520-1569(V.32bis) USR 713-520-9566(V.34/FC) Houston,Texas yob.com Home of alt.cosuard ------------------------------ End of TELECOM Digest V15 #60 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa19440; 24 Jan 95 23:21 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA13529; Tue, 24 Jan 95 17:40:39 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA13522; Tue, 24 Jan 95 17:40:36 CST Date: Tue, 24 Jan 95 17:40:36 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501242340.AA13522@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #61 TELECOM Digest Tue, 24 Jan 95 17:36:00 CST Volume 15 : Issue 61 Inside This Issue: Editor: Patrick A. Townson New Educational Telecom List Started (Todd Graham) 500 Numbers and CID (Mark Stieger) Looking For Papers on LD Competition (Elizabeth Wasserman) Automatic Page Application Off of NT-SL1 ? (Ken Stone) Re: Cellular Service in the Lincoln Tunnel (Carl Moore) Re: Help ... Ancient Party Lines Must Die! (Eduardo Kaftanski) Re: ISDN in Florida (Bruce W. Glassford) Re: T1 vs. T3: What's the Difference? (synchro@access3.digex.net) Re: Looking For 900-MHz Cordless Handsfree Headset (Wayne Huffman) Re: LD Termination Fees to RBOCs (Roger Atkinson) Re: Cattle Call (Dale Neiburg) Re: Internet Mail With Half the Address? (Ted Timar) Re: LD Provider Juggling (Judith Oppenheimer) Re: GSM SIM Implementation (Sam Spens Clason) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: Todd Graham Reply-To: Todd Graham Subject: New Educational Telecom List Started Date: Tue, 24 Jan 95 15:09:08 -0500 Members of this list -- and the greater listserv community -- will be interested to know that the Midwestern Higher Education Commission has recently established a new list dedicated to educational telecommunications. MHEC-TEL is intended as a forum for discourse and information exchange by telecommunications professionals within the higher education community and others interested in opportunities enabled by telecommunications tech- nologies -- for example, distance learning, teleconferencing, interinstitu- tional resource sharing and programming cooperation. List membership is not geographically constrained -- the list welcomes higher education administrators, faculty and professionals from all regions of the country. However, discussion on the MHEC-TEL list should avoid focus on issues of no applicability to institutions in the Midwest. To subscribe, simply follow the normal protocol for Bitnet list subscription. Send a message to: LISTSERV@UMINN1.BITNET (or LISTSERV@VM1. SPCS.UMN.EDU) Message should include your name and the name of your organi- zation/institution: SUBSCRIBE MHEC-TEL First-name Last-name (Affiliation) Comments? Questions? The list-owner for MHEC-TEL is Jeff Williams . ---- opening message on list ---- Welcome to the Midwestern Higher Education Commission's Telecommunications listserv. The MHEC-TEL list has two main purposes. The first is to provide a forum for higher education telecommunications professionals to share ideas, questions, comments, and announcements with peers across the Midwest. The second is to solicit ideas and suggestions from telecommunications professionals in MHEC member states about common institutional challenges, existing MHEC programs, and future cost-savings initiatives. Each of you is welcome (and encouraged) to tell your higher education colleagues about the mhec-tel list and discuss its contents. However, MHEC wishes the list to remain "private" within the higher education community; commercial entities, such as equipment vendors, will not be allowed to join. [stuff deleted] If you have specific questions or suggestions for the MHEC-TEL list, please do not hesitate to contact either MHEC or myself directly. Once again, welcome. Jeff Williams, MHEC-TEL Administrator (willi132@gold.tc.umn.edu) MHEC ------------ Forwarded Message ends here ------------ ABOUT THE MIDWESTERN HIGHER EDUCATION COMMISSION The Midwestern Higher Education Commission (MHEC) was established in 1991 by the Midwestern Regional Education Compact, an interstate agreement among midwestern states. The current member states include Illinois, Kansas, Michigan, Minnesota, Missouri, Nebraska, Ohio, and Wisconsin. The mission of MHEC is to improve higher education opportunities and services in the midwest region though interstate cooperation and resource sharing. Programs include activities to produce regional cost savings to benefit colleges and universities, expand student access, support public policy development through analysis and information exchange, facilitate regional cooperative academic programming, encourage quality management, and promote economic growth through higher education and industry innovation. Todd Graham Midwestern Higher Education Commission 1300 South 2nd Street, Mpls, MN 55454 ph.: 612/626-8288 fax: 612/626-8290 ------------------------------ From: stud@subzero.winternet.com (Mark Stieger) Subject: 500 Numbers and CID Date: 24 Jan 95 20:35:36 GMT Organization: StarNet Communications, Inc Here's something I haven't seen asked in here. When nationwide Caller ID is available, and someone calls you through a 500 number, will their CID information be passed, or will the 500 number (or some ATT number show up? Mark [TELECOM Digest Editor's Note: I don't know, and let's talk about it when the service gets underway. Actually I am a little ticked off about this. In the middle of December I ordered 500 service, and got my number assigned. They insisted there was no way to turn it on until Janaury 20. Comes January 20 it is not working and I call AT&T. It will really be the 23rd, the lady says. Okay, I waited until Monday afternoon and tried it ... still nothing. I get intercepted at the 1-500 and 0-500 mark; Ameritech will listen to nothing further after that. I call back to AT&T and ask them about it. The lady put me on hold for the *longest* time -- about ten minutes -- then comes back and says Ameritech won't have it turned on until January 30. So on that day I shall try it again; who wants to bet me I will still get intercepted at the local switch? And of course, poor, put upon little AT&T: 'there is nothing we can do about it; the local telcos have to install the billing software ...' Well heck, in case she has not heard, Ameritech and AT&T have been fighting over the access fees to be charged for 500 service, and Ameritech is planning their own 500 service. Who wants to bet me this will drag on for months before it gets installed here. Meanwhile of course, AT&T promptly billed me for the service on January 24 -- on my local Ameritech bill -- so much for how it is out of their control until Ameritech cooperates. PAT] ------------------------------ Date: Tue, 24 Jan 1995 15:04:50 -0600 From: wrigley@mcs.com (Elizabeth Wasserman) Subject: Looking For Papers on LD Competition I'm doing some research into long distance competition in the US and am looking for academic papers or articles that evaluate the competitive situation in the US marketplace. I've managed to find about 5-7 good articles but would like to dig up a few more -- do any of you have suggestions on what articles I should be looking out for? I'm interested in anything published after 1988, although articles done in the last two or three years would be most useful. Send your suggestions to me at wrigley@mcs.com Thanks for your generous help, Elizabeth Wasserman wrigley@mcs.com chicago, evanston ------------------------------ Subject: Automatic Page Application Off of NT-SL1? Date: Tue, 24 Jan 1995 11:59:21 -0800 From: Ken Stone I have an application where I need to generate a numeric page when a phone number is dialed. We have an emergency number here on site that when called rings a series of "red phones" around the site at key people's desks. What I would also like to do is generate a page to these same people when the emergency number is dialed. Any ideas? Ken Stone Hewlett Packard, San Diego Site Telecomm & Networking ------------------------------ Date: Tue, 24 Jan 95 21:25:52 GMT From: Carl Moore Subject: Re: Cellular Service in the Lincoln Tunnel In New York City, there are also the Queens-Midtown Tunnel and the Brooklyn-Battery Tunnel. For the Lincoln Tunnel, what do you mean by "'Temp' I-495 between NY and NJ"? This was to be I-495, which: split off NJ Turnpike at what is now exit 16-E; was to cross Manhattan from Lincoln Tunnel to the above- mentioned Queens-Midtown Tunnel (this stretch was never built), and then emerged from there as the Long Island Expressway, becoming N.Y. 495 at or near the Clearview Expressway in eastern Queens. The latest I remember now is that the stretch in NJ is state route 495, and I-495 signs were erected from Queens-Midtown Tunnel all the way to the expressway's end in Suffolk County (eastern Long Island). Old maps had I-78 crossing the Manhattan Bridge, passing near the JFK airport, then turning north to the Throgs Neck Bridge (into the Bronx) and hitting I-95. Now the last reference to I-78 is the New Jersey Turnpike Extension. (From there, you have to go through two intersections to reach the Holland Tunnel.) > In DC, the "tunnels" under the Mall (I-395, was to be I-95) and the > I-195 (?) tunnels ... Where is this I-195? I live and work less than 100 miles from DC, and given adequate description could figure what you are talking about. > Chesapeake Bay Bridge/Tunnel and in Newport News, VA There are two or three tunnels between Norfolk and Portsmouth (one is I-264); the I-664 bridge-tunnel going south from Hampton; and the I-64/U.S. 60 bridge tunnel across Hampton Roads. Going west, there are the tunnels on the PA Turnpike and in Pittsburgh. Oops, there are at least two tunnels in Philadelphia, but not on main routes. There is the 5th Street tunnel, which goes under the approach road to the Ben Franklin Bridge. And there is another tunnel near the Art Museum. At the 26th Street/Passyunk Ave. interchange on the Schuylkill Expressway (I-76) you pass through a short tunnel if you are on 26th Street. ------------------------------ From: ekaftan@mailnet.rdc.cl (Eduardo Kaftanski) Subject: Re: Help ... Ancient Party Lines Must Die! Date: Tue, 24 Jan 1995 05:09:32 GMT In article , Raymond Mereniuk wrote: > I heard a rumor a few years ago which indicated BC Tel's main source > of CO switches was Chile, as the Chilian telco upgraded their switches > BC Tel took all their old switches through a deal with BC Tel's parent This could as well be true. Chilean's biggest telco is CTC (Compa~ia de Telefonos de Chile) nowadays a long way from the state inefficiency it was submerged what eight, maybe less, years ago. CTC Corp., as it is called now, is a corporation with full independancy. It was once owned by an investor named Bond, and I think is now owned by Telefonica de Espa~a (Spain's telco). Ok, back on track, CTC has changed nearly all the switches here for new ones. (Does somebody know tech info on them?) And you can kow get all kinds of services you could not dream of five years ago. So if the rumor heard is betweeen three and ten years old, it may be true. Anyways, I hope this didn't sound as propaganda. I still hate monopolies. CTC Corp is one, they sometimes work REALLY well (I got three lines installed in my office in less that 24 hours) and sometimes real bad (try to get a line where my apartment is; I quit after three years of waiting in a line and got a second hand line from a competing telco (CMET) who works better that CTC but has a VERY limited area). Just a last bit of information. Chile has now a full 'multicarrier' system since October 94. But almost no one has gotten any bill. I myself have not paid a single long distance call since then. How do US long distance operators bill? Ah, you also get an 'IS...D... what?' response here. You do get that response also if you ask for leased lines. Eduardo Kaftanski ekaftan@ing.puc.cl [TELECOM Digest Editor's Note: Long distance calls here are billed each month. You will usually get the bill within a month or less of making the call; occassionally it might be the second month before the bill comes. PAT] ------------------------------ From: bruceg@interramp.com (Bruce W Glassford) Subject: Re: ISDN in Florida Date: 23 Jan 1995 05:43:34 GMT Organization: PSI Public Usenet Link In article , Evon Bent says: > I was wondering if anyone has heard anything about Southern > Bell implementing ISDN in Florida? I've been considering it to get a > link to the net and a business line as well. I was also wondering if > anyone could give me an idea of the rates I might get charged. If no > one knows or isn't sure how about a number I might call to get this > info? Barring that I was wondering if anyone was currently using ISDN > in Florida and what their experiences with it were. The local SB folks here know squat. But, I went to a BellSouth get-together a few months ago touting Intel's ISDN application ProShare, and BellSouth announced an 800 number for ordering ISDN services. The event was in August of last year, and I don't have my notes with me (meaning I don't have the 800 number), but you might try 800 Info for "BellSouth ISDN Service". I don't have my BRI yet, probably will order it in the next few months. Hope this helps. Bruce W. Glassford Digital Communications Consultants, Inc. Orlando, FL bruceg@interramp.com ------------------------------ From: synchro@access3.digex.net (Steve) Subject: T1 vs. T3: What's the Difference? Date: 24 Jan 1995 12:02:45 GMT Organization: Express Access Online Communications, Greenbelt, MD USA The most basic difference is that a T3 is roughly 28 times "faster" than a T1. T1s are 1.544 Mbps while T3s are 44.736 Mbps. Telcos and big telecomm users often aggregate their T1 traffic onto T3s with an M13 type multiplexer or a 3:1 digital cross-connect machine. This is just a start. The line coding is different as well. T1s uses AMI or B8ZS, whereas T3 always uses B3ZS. Take it easy, Steve ------------------------------ From: whuffman@ix.netcom.com (Wayne Huffman) Subject: Re: Looking For 900-MHz Cordless Handsfree Headset Date: 24 Jan 1995 13:13:52 GMT Organization: Netcom In Martin.Soques@amd.com (Martin Soques) writes: > Greetings! Subject line says all; I'm looking for a 900-MHz digital > phone with a cordless headset rather than a cordless handset. So that Pat doesn't seem to be the one plugging Hello Direct, *I* will take a turn at it. They show a 900MHz cordless HEADset on page six of their Spring '95 catalog for US$349. It weighs 7 ounces with the two hour battery. Hello Direct can be reached at 1-800-HI-HELLO. They also have a WWW site at URL http://www.hello-direct.com/hd/ Their e-mail address is xpressit@hihello.com BTW I don't work for them either. Wayne Huffman ------------------------------ From: rogera@cts.com (Roger Atkinson) Subject: Re: LD Termination Fees to RBOCs Organization: R. F. Atkinson & Co. Date: Tue, 24 Jan 1995 02:33:26 GMT In article eyegaz1@ibm.net (Pete Norloff) writes: > I'm looking for some information on the sharing of long distance fees > between long distance carriers and the RBOCs. I've found casual > references which indicate that the long distance carriers pay the > RBOCs approximately 25% each of the fees collected for long distance > calls and keep 50% for themselves. This 25% was referred to as > something like "line termination charges". It's the payment to the > local carrier for connecting one end of the call. > I'm hoping to find an authoritative reference to help me in an > argument with a Bell Atlantic engineer. This engineer believes that > Bell Atlantic is providing the terminating end of long distance calls > to the long distance carriers for free. Obviously, you don't believe that Bell companies give anything away. I suppose you also don't believe in the tooth fairy . Seriously, there must be a tariff filed with the state utilities commission for them to collect money, on a regular basis, from multiple customers (IXCs). Check your local telco business office. In most states, they are required to make their tariffs available for public inspection. (Maybe we should start a movement to pressure PUCs to require that tariffs be on the Internet?) (Maybe they already are in some states?) Consider the case of the small telco (non-Bell), in Nebraska, I believe, that apparently had some mysterious financial relationship with a local filthy talk operator. Said sleaze bag (my opinion) advertized his "service" all over the country, and listed an ordinary area code and number, not a 900 SAC. The net income of the telco reportledly went up spectacularly in the ensuing months. The filth peddler continued to operate, and expand his system. Since he was merely receiving ordinary long distance calls, he had no obvious source of revenue to support his generosity. I read about it in the {San Diego Union Tribune}, because a local mother of a teenage girl was stuck for thousands of dollars of ordinary toll charges, even though she had arranged with the local Bell company to block 1+900 calls. Getting back to your question, it would appear that the various long distance carriers involved in carrying these calls paid the local telco for such termination. This used to be called something like "settlements and separations" before Judge Greene "fixed" the phone system. Hope this helps! Roger Atkinson ------------------------------ Date: Tue, 24 Jan 1995 15:25:58 EST From: DNEIBURG@npr.org Subject: Re: Cattle Call In TELECOM Digest v15 #46, the Moderator noted: > [TELECOM Digest Editor's Note: A couple of questions for whoever knows > the answers ... is it hard to train a cow to respond to your call? Is If not, this practice may lead to a worse problem. What happens when the cow gets corrupted by the promise of easy fodder and starts moonlighting as a drug courier? Dale Neiburg, STC National Public Radio Phone: 202-414-2640 635 Massachusetts Ave., N.W. Washington, D.C. 20001 Internet: dneiburg@npr.org ------------------------------ From: tmatimar@isgtec.com (Ted Timar) Subject: Re: Internet Mail With Half the Address? Organization: ISG Technologies Inc. Date: Tue, 24 Jan 1995 11:12:22 -0500 In Volume 15, Issue 53, Message 9, Jane McMahon wrote, > How do find someone using Internet? > [TELECOM Digest Editor's Note: Perhaps it is about time for someone to > write an article describing the Internet 'white pages' and how to use > them. I think searching those would be a good way for you to start. PAT] Three Usenet FAQs of use exist, in Comp.Mail.Misc, "Updated Inter-Network Mail Guide" also in Comp.Mail.Misc, "FAQ: How to find people's E-mail addresses" and in Soc.Net-People, "FAQ: College Email Addresses" These in turn are archived at rtfm.mit.edu as (in order), pub/usenet/news.answers/mail/inter-network-guide pub/usenet/news.answers/finding-addresses pub/usenet/news.answers/mail/college-email/part[123] The last of these (College email addresses) is close to a year out of date, so any volunteers to take it over would probably be extremely welcome. Ted Timar tmatimar@isgtec.com ------------------------------ From: producer@pipeline.com (Judith Oppenheimer) Subject: Re: LD Provider Juggling Date: 24 Jan 1995 11:42:56 -0500 Organization: Interactive CallBrand(TM) Justin, My advice is to call your LDDS account representative and explain your problem; copy them by fax on the paperwork, and *expect* them to iron out the problem. Much of our long distance is via a top-notch reseller in Atlanta. When there are billing or other adminstrative errors, overlaps, etc., one phone call to her, with a documenting fax, is all it's ever taken to straighten the problem out. Including appropriate account crediting, etc. If you are not getting this level of service from your account rep at LDDS, speak with that person's manager. If they are still not responsive, switch service providers. If you need any more help, feel free to email me directly - producer@pipeline.com. Good luck! Judith Oppenheimer, Producer@Pipeline.com Interactive CallBrand(TM) ------------------------------ From: d92-sam@black29.nada.kth.se (Sam Spens Clason) Subject: Re: GSM SIM Implementation Date: 24 Jan 1995 18:02:19 GMT In tholome@dialup.francenet.fr (Eric Tholome) writes: > In article , k22413@kyyppari.hkkk.fi > (Harri Kinnunen) wrote: >> Most of the hand-held GSM phones use a "punched-out" section of the >> Smartcard, being about 1cmx2cm in size. The punch-out dimensions are >> also standard, but I don't know if they are included in ISO-7816. > And this totally ruins one of the nice purposes of the SIM: being able > to have several phones (for instance, one nice vehicle mounted phone, > and a hand held terminal) and still using them with one SIM only. If > two of your phones use different types of SIM, you're out of luck! > I've been told that some companies were now selling adapters, but the > convenience of all this has yet to be seen. I agree that different SIMs are pain. But, it's really not that bad. All Swedish operators offer two-card subscriptions. Two IMSIs but one phone number. Only one phone can make or receive calls at the same time. I don't have a cellphone myself. But I've been told that on Europolitan you must dial 333 to "change IMSI" but on Comviq you only have to turn the other phone on. The IMSI last to do a manual update is the one that gets the calls. How it works on Telia I don't know. Sam Sam Spens Clason ------------------------------ End of TELECOM Digest V15 #61 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa21953; 25 Jan 95 2:52 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA19866; Tue, 24 Jan 95 21:43:11 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA19849; Tue, 24 Jan 95 21:43:07 CST Date: Tue, 24 Jan 95 21:43:07 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501250343.AA19849@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #62 TELECOM Digest Tue, 24 Jan 95 21:43:00 CST Volume 15 : Issue 62 Inside This Issue: Editor: Patrick A. Townson Re: Where is PicturePhone II Now? (Ed Ellers) Re: Using U.S. Modem in Israel (Rich Galen) Re: Wireless CO's Challenge New NPAs? (David E.A. Wilson) Re: Ancient Party Lines (David Breneman) Re: Voice Response Unit Question (Christian van der Ree) Re: Help Locating Telephone/PC Interface Board (Christian van der Ree) Re: Cellular Phone Information Wanted (John Lundgren) Re: Where: T1 Information/FAQ? (John Lundgren) Re: Help Needed With Displaying X Windows on the PC (Mike MacFaden) Re: Chatter Heard on Scanner Leads to Criminal Charges (David Hough) Re: Telephony Card/Software Needed (Joe Sulmar) Re: ANSI Terminal Communications (Timothy D. Shoppa) Re: Anyone Have Experience With LDDS/Metromedia? (Justin T. Leavens) Re: Looking For 900-MHz Cordless Handsfree Headset (Roger Snyder) Re: AT&T First to Deliver Long-Awaited "Follow-Me" 500 Numbers (jamiec102) Re: CID Question (Dave Levenson) Re: More CO Codes For Each NPA; Any Telcos Take Advantage? (W. Leatherock) Five Digit Phone Numbers (Carl Moore) Cable Cost-of-Service Regulation (Prakash Hariramani) Radio Station Transmission Lines (Daniel Ritsma) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: Ed Ellers Subject: Re: Where is PicturePhone II Now? Date: Tue, 24 Jan 95 18:33:55 -0500 Organization: Delphi (info@delphi.com email, 800-695-4005 voice) David Gingold writes: > Can anyone tell me what ever happened to the PicturePhone II phones > manufactured by AT&T in the '70's? I have heard a rumor that these > phones might have been given to Ameritech as part of the breakup, but > I have know idea where to start looking. NYNEX, Bell Atlantic and Ameritech probably have them, if they weren't sent back to Western Electric to be scrapped -- the service was offered in New York, Chicago and Pittsburgh, with other cities getting intercom-only Picturephone service (i.e. you could have it within your own PBX but not to other sites because the video switches weren't in place). The Bell System also had a setup for several years between top executives at 195 Broadway and the presidents of each of the BOCs, and some other BOCs obtained sets to be used for demonstrations. [TELECOM Digest Editor's Note: They were in the lobby of the Illinois Bell headquarters building in Chicago. Customers could use them by appointment to hold conferences, etc with people in other cities. PAT] ------------------------------ From: rgalen@tad.eds.com (Rich Galen) Subject: Re: Using U.S. Modem in Israel Date: Tue, 24 Jan 1995 11:20:58 -0600 Organization: EDS In article , kass@tacout.army.mil (Jeremie Kass) wrote: > I am interested in using the modem I use in the U.S. while I am in > Israel. Is there any technical and/or legal problem in doing this? > Also, what kind of telephone jacks are used there? This will be > connected to a residential line, so will it be the same RJ-11 jack as > here? This will NOT be technical because I aren't one, but I have been in Israel several times over the past few months and have found (1) my US modem (GV Mercury) works fine back to the US; and (2) sometimes you find an RJ-11 jack and sometimes you find a jack which is the same height, but about 4x wider than an RJ-11. A friend of mine said he would send me a converter which had the RJ-11 female on one end and the standard Israeli jack on the male end. Rich Galen rgalen@tad.eds.com EDS Emerging Market Development Plano, TX 214-605-0017 ------------------------------ From: david@cs.uow.edu.au (David E A Wilson) Subject: Re: Wireless CO's Challenge New NPAs? Date: 25 Jan 1995 09:35:11 +1100 Organization: University of Wollongong, NSW, Australia. pritter@nit.AirTouch.COM (Phil Ritter) writes: > In article Liron Lightwood apana.org.au> writes: >> Here in Australia, we have the best of both worlds. Our cellular >> phones have their own area code like prefixes, e.g. 018, 015, 041. >> However, when making a local call from a cellular phone, you only have >> to dial the six or seven digit number, no area code required. > While this may be interesting in areas like Australia, where the > numbering plan areas (or city codes) are large, it breaks down quickly > in the NANP [at least in the dense parts of it]. It even breaks down here in Australia -- we often get calls from mobile phones which should have gone to the adjacent 044 area code but end up here in 042. When the new eight digit numbering plan arrives in 1998 we will only have four area codes for the entire country the only problems will be along a couple of state borders. David Wilson Dept CompSci Uni Wollongong Australia david@cs.uow.edu.au ------------------------------ From: daveb@dgtl.com (David Breneman) Subject: Re: Ancient Party Lines Date: 24 Jan 95 23:41:13 GMT Organization: Digital Systems International, Redmond WA Scott Falke (scott@csustan.csustan.edu) wrote: > In article scott@csustan.csustan.edu > (Scott Falke) writes: >> In re your story about party-line entertainment: >> X-Telecom-Digest: Volume 15, Issue 11, Message 2 of 14 >> [TELECOM Digest Editor's Note: The way you describe it was one way >> of doing the ringing; there were various methods. What happened on >> your system if you wanted to call someone on your party line? > For 8-party, one dialed 119xy, where x was your line position (1-8) > and y was the called party (1-8). The ring generator would alternate > between the two. When the ring quit, you picked up the handset, cause > they had too. If the ring didn't quit, you picked up the handset > anyway. They weren't home. If you shared the same relative polarity > with the called party (the gas tubes and tip/ting to gnd) you'd hear > one long (i.e., yours) and two shorts (theirs) in repetition. THAT > was real cool. Hey, a farming town, you know ... On our system, you dialed the number of the person you wanted, got a busy signal, then hung up. Unless you and the other party shared a ring (ie, one long vs two short) you heard nothing -- you just had to wait a while and pick up the receiver and find out if they were there. Of course, this system could always be used to ring your own phone as well. When the Jehovah's Witnesses showed up, an accomplice would ring the phone, then annouce you had an important call. Worked every time. :-) David Breneman Email: daveb@jaws.engineering.dgtl.com Systems Administrator, Voice: +1 206 881-7544 Fax: +1 206 556-8033 Product Development Platforms Digital Systems International, Inc. Redmond, Washington, U. S. o' A. ------------------------------ From: ttm@xs4all.nl (Christian van der Ree) Subject: Re: Voice Response Unit Question Date: Wed, 25 Jan 1995 00:03:17 GMT Organization: TTM Nederland > I presently operate a voice/fax response unit using a 486 pc with > analog phone lines directly connected to a Rhetorex voice board. > The software and hardware I have is capable of being used with a PBX > to do call transfers. I don't have a PBX but I was wondering if I > could purchase a desktop phone which could be configured so that if a > caller asks for my extension the voice response unit would transfer > the call to the phone just like a PBX. > Anybody have any ideas? What about this workaround that I use: A caller types in the extension he wish to connect to. If he types in #110 for instance, the computer beeps one time. I know he wish to speak to me and pick up the phone. If the caller types in #200, the computer makes two beeps (or plays a .wav file) I know its for ... Hopefully you like one. I'm still waiting for some nice payable voice- hardware that can transform a PC in a real PBX. TTM Nederland ------------------------------ From: ttm@xs4all.nl (Christian van der Ree) Subject: Re: Help Locating Telephone/PC Interface Board Date: Wed, 25 Jan 1995 00:07:53 GMT Organization: TTM Nederland > I need to locate an "IBM" PC peripherial board that will let me > answer the phone, play audio prompts and accept touch tone input from > the caller. Multiple lines per card and multiple cards per box will > be better. Any leads will be greatly appreciated. If it must be an IBM board, I can't help you. But else I can suggest some real nice boards that will do the things that you want it to do and much ... much ... more. TTM Nederland ------------------------------ From: jlundgre@kn.PacBell.COM (John Lundgren) Subject: Re: Cellular Phone Information Wanted Date: 24 Jan 1995 15:12:26 GMT Organization: Pacific Bell Knowledge Network LOKESH KALRA (lk05@lehigh.edu) wrote: > Is there a place other than the January 93 issue of {Consumer Reports} > (probably quite out of date now) that discusses the Cellular/Mobile > phone technology, kinds of plans offered, and the various models and > how they are rated? Would appreaciate any info at lk05@cs2.cc.lehigh.edu It seems that the carriers are practically giving the phones away to get you to sign up with them for a year or so. Just goes to show where the profits are. Rather than worry about the phone technology, it might be wise to worry about the bills you may be getting. According to the newsmedia, the cloning and fraud is rampant. John Lundgren - Elec Tech - Info Tech Svcs Rancho Santiago Community College District 17th St. at Bristol \ Santa Ana, CA 92706 jlundgre@pop.rancho.cc.ca.us\jlundgre@kn.pacbell.com ------------------------------ From: jlundgre@kn.PacBell.COM (John Lundgren) Subject: Re: Where: T1 Information/FAQ? Date: 25 Jan 1995 00:09:42 GMT Organization: Pacific Bell Knowledge Network BRUCE268@DELPHI.COM (BRUCE268@news-feed.delphi.com) wrote: > Would some one please pass on any sites/addresses where information or > FAQs on T1 service might be found. Looking for general technical > overview of the service. Probably the best place to look for this is the local telco service representative. Maybe for tech info try a good library. John Lundgren - Elec Tech - Info Tech Svcs Rancho Santiago Community College District 17th St. at Bristol \ Santa Ana, CA 92706 jlundgre@pop.rancho.cc.ca.us\jlundgre@kn.pacbell.com ------------------------------ From: mike@premisys.com (Mike MacFaden) Subject: Re: Help Needed With Displaying X Windows on the PC Date: 24 Jan 1995 18:44:03 -0800 Organization: Premisys Communications, Inc In article , Ken Stack wrote: > I am trying to fins a way to display x windows on my PC from my Sun at > work. The problem is that my Sun at work does not have slip or ppp > for security reasons. I have attempted to use PSI's interramp service 1) You need a SLIP or PPP link from home. If your workstation doesn't have it, then I suggest your sysAdm install a Terminal Server which does provide good security (companies: Livingston, Xylogics, Xyplex) 2) Get a copy of an X server that implements Low Bandwidth X (LBX) A good company to talk to is Network Computing Devices (NCD). All of these companies are on the net. Regards, Mike MacFaden Premisys Communications, Inc Fremont CA USA ------------------------------ From: David Hough Subject: Re: Chatter Heard on Scanner Leads to Criminal Charges Date: Tue, 24 Jan 95 10:33:38 GMT Organization: Chaotic In article it was written: > ECPA as amended is only the latest insult. Previous laws made it illegal to > intercept certain satellite downlinks (and uplinks), radar speed guns, > and a number of other types of signals. If the trend continues, listening to > any signal not explicitly intended for broadcast will be illegal. I know > that at least one Congress member proposed legislation with just that > wording. In the UK you are only allowed to listen to authorised broadcast stations, amateur radio stations and transmissions from the Standard Frequency Service. Even listening to CB is illegal unless you possess a CB licence. Dave djh@sectel.com Tel +44 1285 655 766 Fax +44 1285 655 595 ------------------------------ From: Joe Sulmar Subject: Re: Telephony Card/Software Needed Date: 24 Jan 1995 20:04:40 GMT Organization: North Shore Access/Eco Software, Inc; (info@shore.net) > I'm looking for cards for IBM PCs that can handle phone calls ... > with about four lines but have the ability to upgrade to perhaps 24 The following companies make boards that will meet your needs: Dialogic 800-755-4444, 201-993-3030 Natural Microsystems 800-533-6120, 508-650-1300 (Vikki Stoneback) Rhetorex 408-370-0881 I also know of some sources of used equipment, but I recommend that you buy your first board direct, so that you get all of the latest doc, software and support. A 4-port board from these companies costs approximately $1200 (check out the quantity discount break points before you buy). All of the above companies offer OS/2 and UNIX drivers, some of them offer DOS drivers, and NT is either under development or already available. Lots of third party companies make application development tools for these boards. Let me know if you need information on software. Good luck. Joseph J. Sulmar jsulmar@shore.net Computer-Telephony Consultant voice: 617-862-6358 Lexington, MA fax: 617-621-0499 ------------------------------ From: shoppa@almach.krl.caltech.edu (Timothy D. Shoppa) Subject: Re: ANSI Terminal Communications Date: 24 Jan 1995 10:29:00 PST Organization: California Institute of Technology In article , ua291@fim.uni-erlangen.de (David O. Laney) writes ... > I am interested in getting the ANSI Terminal Standards (i.e. escape > sequences) to use to drive a communications package. Check out the anonymous ftp site cs.ukt.edu; in the directory: /pub/shuford/terminal You'll find many files that will be useful, particularly "ansi_x3_64.txt". Tim. (shoppa@altair.krl.caltech.edu) ------------------------------ From: jtleavens@aol.com (JT Leavens) Subject: Re: Anyone Have Experience With LDDS/Metromedia? Date: 24 Jan 1995 13:20:16 -0500 Organization: America Online, Inc. (1-800-827-6364) Reply-To: jtleavens@aol.com (JT Leavens) I agree with the comment on inbound service from LDDS. I've got an 800 line with them right now, and I am getting comments from customers about once a week that they can't get through, getting some intercept message. Outbound is no problem, but I don't know how long I am going to keep them for inbound. It's a tough choice though: I've got their rates at something like 13 cents/min for inbound and outbound calls ... ($1000/monthly and one year commitment). ------------------------------ From: rsnyder@panix.com (Roger Snyder) Subject: Re: Looking For 900-MHz Cordless Handsfree Headset Date: 24 Jan 1995 21:38:25 -0500 Organization: SHAD Martin Soques (Martin.Soques@amd.com) wrote: > Greetings! Subject line says all; I'm looking for a 900-MHz digital > phone with a cordless headset rather than a cordless handset. Hello Direct (1-800-444-3556) has a 900MHz cardless headset for $349. Roger ------------------------------ From: jamiec1024@aol.com (JamieC1024) Subject: Re: AT&T First to Deliver Long-Awaited "Follow-Me" 500 Numbers Date: 24 Jan 1995 08:50:30 -0500 Organization: America Online, Inc. (1-800-827-6364) Reply-To: jamiec1024@aol.com (JamieC1024) It is the owner of the "Follow-Me" card. However this information may be misleading. AT&T was not the first to deliver long-awaited "Follow-Me" Numbers. A case in point: a company in Michigan called US Signal was in fact the first to have TRUE "Follow Me" capabilities. The AT&T card is really a FIND ME card where it calls a set of preprogramed numbers; this service can get expensive real fast. UniDial Communications [TELECOM Digest Editor's Note: And despite their statements that 500 numbers would be available by now, they still are not turned on, at least here in the Chicago area. I was one of the first people to sign up for 500 service when they started taking orders. Despite calling within a day or so of their announcement that orders were being accepted, there were absolutely *no* good numbers available ... already taken, I was told. Yeah, we know how AT&T does that; trying to get 800 numbers away from them and into the hands of another resporg or carrier got me soured. All these 'reservations' and never once a name to go with them. Well, be that as it may, they told me back in December that my 500 number would take a month to turn on but be available January 20. Comes last Friday, they said it would be Monday the 23rd ... now they are saying it will be next week on January 30. As usual, point your finger at someone else; the rep claimed to me that Ameritech does not yet have the billing software in place; that's nonsense because in fact I got billed for my first month of 500 service by AT&T back on January 24 as part of my Ameritech bill. Watch on January 30 for some new date to be set. Why wouldn't the AT&T reps have known this when they took my order now over a month ago? PAT] ------------------------------ From: dave@westmark.com (Dave Levenson) Subject: Re: CID Question Organization: Westmark, Inc. Date: Mon, 23 Jan 1995 02:37:11 GMT Stan Schwartz (stanschwartz-aviswizcom@e-mail.com) writes: > I have recently begun using TotalTel as a secondary LD carrier (by > signing up for secondary service and a calling card). ... > HOWEVER ... if I dial 10081 + NPA + NXX + XXXX, the call is completed > with CID information provided at the receiving end! Any ideas on what > they are doing here? > On their 800 service, TotalTel also seems to translate the ANI of the > calling party and delivers it as CID information on the receiving end. This is just a guess on my part, but this sounds very similar to the service we get using Cable & Wireless. Could it be, perhaps, that C&W and TotalTel are both reselling WillTell service? WillTell is the company most often described in this digest as providing Inter-LATA delivery of ANI via CID, or something like that. Dave Levenson Internet: dave@westmark.com Westmark, Inc. UUCP: uunet!westmark!dave Stirling, NJ, USA Voice: 908 647 0900 Fax: 908 647 6857 ------------------------------ From: wes.leatherock@oubbs.telecom.uoknor.edu Date: Tue, 23 Jan 95 21:29:55 Subject: Re: More CO Codes For Each NPA - Any Telcos Take Advantage? Quoting dleibold@gvc.com (Dave Leibold): > With the introduction of "interchangeable" area code formats > officially beginning in a few days, the required dialing changes > throughout the North American Numbering Plan mean that all area codes > should be able to assign N(0/1)X format prefixes for their local > numbers. > Are there other area codes where introduction of N(0/1)X > format CO codes/prefixes is planned? I first encountered CO codes in this format at least ten years ago when I was calling a Southern California firm with which my company was doing business. (Sorry I don't remember the area code, and it's probably been changed from what it was then anyway.) The July 1992 telephone directory for "Greater Fort Worth" has a list of all prefixes in both the Fort Worth metro calling area (in area code 817) and the Dallas metro calling area (area code 214). In 817 these prefixes are listed in the N(0/1)X format: 410 and 806 And in the 214 area code: Southwestern Bell exchanges: 508 703 712 812 704 707 815 202 204 212 215 305 314 502 504 601 602 603 606 609 616 707 801 802 803 804 805 807 808 906 908 909 912 913 914 708 709 217 218 515 617 302 309 302 312 819 407 713 401 402 506 406 919 308 404 419 701 702 715 716 301 705 801 802 803 907 917 918 902 904 706 503 613 203 319 819 905 216 GTE exchanges: 313 413 513 514 518 607 714 717 718 719 915 916 219 304 315 317 316 318 306 307 416 417 418 403 516 517 519 604 605 608 612 618 619 205 303 414 (These were scooped off the maps arranged geographically by wire centers/zones, so they are not in numerical order and I might have missed one or two.) This was two and a half years ago, and there are probably more of these now. I know the Houston metropolitan exchange (area code 713) also has a lot of CO codes in the N(0/1)X format. Wes Leatherock wes.leatherock@oubbs.telecom.uoknor.edu wes.leatherock@f32.n147.z1.fidonet.org ------------------------------ Date: Tue, 24 Jan 95 23:09:10 GMT From: Carl Moore Subject: Five Digit Phone Numbers I am originallly from Wilmington, Delaware. For many years, what became the {News-Journal} newspapers were on what became 302-654-5351. (Please don't call that number; it was changed long ago!) Originally (and I had to read about this since I am too young to remember that far back) it would have been printed as "Wilmington 4-5351" or simply "4-5351" with Wilmington being understood; I believe you had to ask the operator if you wanted to reach such a number. "Wilmington" was replaced by "OLympia" (OL for short) when it came time for customers to be able to dial directly. Then, in 1966, Diamond State Telephone stopped printing exchange names in the Wilmington phone book, and existing numbers of form OLx-xxxx began to be printed as 65x-xxxx. TELECOM Digest Editor's Note: Until the late 1960's a peculiar thing existed in Lafayette/West Lafayette, Indiana with Purdue University and the rest of the phones in the town. Lafayette was surrounded by area code 317, and it had seven digit numbers like everyone else, yet it was not direct dialable. You could call Indianapolis, or towns on either side of it by dialing 317 and the number, but for Lafayette and West Lafayette you asked your operator for the number. Purdue had five digit extension numbers, and locally from within town if you knew the desired extension you could dial 92 plus the five digits. To get the Purdue operator from anywhere in town, you just dialed 90. If you were calling from somewhere like Chicago, you dialed 211 for the long distance operator and asked for 'Lafayette, Indiana nine-oh' or perhaps for nine-two-whatever. Finally about 1970 long after everywhere else in the area was dialable, Lafayette and Fort Wayne (both were served by GTE, both had seven digit numbers like everyone else) got connected with everyone else. Does anyone remember when all the military bases around the USA had their own special arrangements? Camp McCoy in Wisconsin, for example, was just 'Camp McCoy' to the long distance operator; it had four digit extensions but no actual 'main listed number'. It was just 'Camp McCoy, extension xxxx' via the long distance operator. Ditto Fort Benjamin Harrison in southern Indiana and Great Lakes Naval Base. PAT] ------------------------------ From: Prakash Hariramani Subject: Cable Cost-of-Service Regulation Date: Tue, 24 Jan 1995 18:56:03 -0500 Organization: Info Networking Institute, Carnegie Mellon, Pittsburgh, PA Hi: I was wondering if any one could tell me the status of cost-of-service regulation for cable companies by the FCC. I am specifically interested in accounting details, i.e. what costs should be considered and how to calculate cost-of-service. I searched through the FCC gopher but did not find anything with this level of detail. Thanks, Prakash Hariramani (ph2k@andrew.cmu.edu) Information Networking Institute Carnegie Mellon University 5000 Forbes Avenue Pittsburgh, PA 15213 ------------------------------ From: Daniel Ritsma Subject: Radio Station Transmission Lines Date: Mon, 23 Jan 1995 00:23:51 -0500 Organization: Courant Institute of Mathematical Sciences I am working for a small radio station that is now using two 8kHz lines to feed four tansmitters (AM). On one line we feed three transmitters since they are for buildings next to each other; the other line is for a building some 150 blocks from here. Should we stick with analog lines or slowly move over to other types of communication by phone? The fact that we have to branch off led me to believe that we should go for digital transmition, so that we would have less noise and a better signal. Does anybody have experience with this? We are located in Manhattan and NYNEX is not of much help. Getting our current two lines to work properly without too much loos was already a great victory for us. Our budget is limited as we are a college radio station. All help is greatly appreciated. Sincerely, Daniel ------------------------------ End of TELECOM Digest V15 #62 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa02513; 25 Jan 95 17:20 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA00129; Wed, 25 Jan 95 09:22:05 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA00119; Wed, 25 Jan 95 09:22:03 CST Date: Wed, 25 Jan 95 09:22:03 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501251522.AA00119@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #63 TELECOM Digest Wed, 25 Jan 95 09:22:00 CST Volume 15 : Issue 63 Inside This Issue: Editor: Patrick A. Townson 205/334 Area Code Split (Jerry Pruett) Radio Modems For the European License-Free Bands? (ko@komac.knoware.nl) Questions About ADSL and HDSL (Olivier Andrieu) Implementations of the German SISA Specs? (Finn Andresen) Marine Telecom Installation (Demosthenes Panagopoulos) Wireless Networks (Marie-Louise Kok) Difficulty With Atlantic Bell ISDN (Jeff Hersh) Value of Motorola Flip Phone (Microtac 950) (Brian Klaas) Technical Help Needed With Pending Litigation (John Marinelli) Re: Question on Call-Back Operators (Georg Oehl) Re: Telephony Card/Software Needed (Christian van der Ree) Re: Radio Station Transmission Lines (satyr@bpd.harris.com) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Subject: 205/334 Area Code Split From: kd4cim@vulcan.com (Jerry Pruett - KD4CIM) Date: Tue, 24 Jan 95 19:41:33 -0600 Organization: Vulcan - Live Long and Prosper! On 1/15/95, the 205 area code (Alabama) was split into 205 and 334. 205 remains the area code for LATAs 476 (Birmingham) and 477 (Huntsville). LATAs 478 (Montgtomery) and 480 (Mobile) were moved to the new 334 area code. The following is a list of the NNXs that have moved to the 334 area code. This list does NOT come from any official source, but my sampling of it seems to agree with the ad posted by South Central Bell in the 1/16/95 Communications Week. There is a "grace" period for which both the 205 and 334 area codes will work, but I left the Comm Week at the office, so I don't have the exact date. I seem to recall the "grace" period ending in June or July though. For more precise information for programming PBXs and such, call SCB (they had an 800 number in the Comm Week ad). At the end of the "grace" period, I assume that SCB (or is it Bellcore) will start assigning new NNXs that may duplicate in the 205 and 334 NPAs. Again, this following information is NOT guaranteed as it is extracted from a personal database. My use of the database requires that I keep it as accurate as possible however. For exact details, you should consult the Comm Week Ad and/or call SCB. NPA-NNX CLLI NPA-NNX CLLI NPA-NNX CLLI NPA-NNX CLLI 334-206 MTGMALMT 334-210 ANDSALXA 334-213 MTGMALDA 334-215 MTGMALDA 334-216 DMPLALMA 334-222 ANDSALXA 334-223 MTGMALMT 334-223 MTGMALMT 334-225 CTHRALXA 334-227 FTDPALMA 334-240 MTGMALMT 334-241 MTGMALMT 334-242 MTGMALMT 334-243 BNKSALXA 334-244 MTGMALDA 334-246 JCSNALNM 334-248 RPTNALXA 334-255 DLVLALXA 334-256 FMTNALMT 334-256 FMTNALMT 334-257 NTSLALXA 334-258 GSPTALXA 334-260 MTGMALDA 334-261 MTGMALMT 334-262 MTGMALMT 334-263 MTGMALMT 334-264 MTGMALMT 334-265 MTGMALMT 334-266 LSVLALXA 334-267 FRCYALXA 334-269 MTGMALMT 334-270 MTGMALDA 334-271 MTGMALDA 334-272 MTGMALDA 334-275 GVHLALXA 334-276 CFVLALXA 334-277 MTGMALDA 334-278 LWBOALXA 334-279 MTGMALDA 334-281 MTGMALNO 334-282 FNBGALXA 334-283 TLLSALXA 334-284 MTGMALNO 334-285 MTGMALMB 334-286 MTGMALNO 334-288 MTGMALNO 334-289 DMPLALMA 334-293 MTGMALMT 334-294 HXFRALXA 334-295 LNDNALMA 334-296 FMTNALMT 334-299 NWTNALXA 334-301 MTGMALDA 334-303 MTGMALDA 334-304 MOBLALSH 334-308 ENTRALXA 334-312 MTGMALDA 334-316 MOBLALSH 334-317 MTGMALDA 334-327 WLHLFLXA 334-330 MOBLALPR 334-334 EUFLALMA 334-335 LVRNALXA 334-337 VRBGALXA 334-341 MOBLALSH 334-342 MOBLALSH 334-343 MOBLALSH 334-344 MOBLALSH 334-346 FRHMALXA 334-347 ENTRALXA 334-361 PRVLALMA 334-365 PRVLALMA 334-366 MPVLALMA 334-368 ATMRALXA 334-369 WLHLFLXA 334-374 MCKNALXA 334-376 GRGNALXA 334-380 MOBLALSH 334-382 GNVLALXA 334-385 ARTNALXA 334-388 GNTTALXA 334-393 ENTRALXA 334-397 CLIOALXA 334-399 MTGMALDA 334-401 MOBLALAZ 334-402 MOBLALAZ 334-405 MOBLALAZ 334-408 MOBLALBF 334-409 MTGMALDA 334-412 SELMALMT 334-414 MOBLALSH 334-415 MOBLALAZ 334-416 MTGMALDA 334-417 MOBLALAZ 334-418 SELMALMT 334-419 SELMALMT 334-421 MOBLALAZ 334-427 ANDSALXA 334-431 MOBLALAZ 334-432 MOBLALAZ 334-433 MOBLALAZ 334-434 MOBLALAZ 334-438 MOBLALAZ 334-439 MOBLALAZ 334-441 MOBLALAZ 334-443 MOBLALBF 334-445 OZRKALXA 334-450 MOBLALOS 334-452 MOBLALPR 334-454 MOBLALAZ 334-456 MOBLALPR 334-457 MOBLALPR 334-460 MOBLALSH 334-469 RDLVALXA 334-470 MOBLALOS 334-471 MOBLALOS 334-473 MOBLALOS 334-474 PROTALXA 334-476 MOBLALOS 334-478 MOBLALOS 334-479 MOBLALOS 334-484 GSHNALXA 334-485 FTDVALXA 334-493 OPP ALXA 334-496 DOZRALXA 334-502 AUBNALMA 334-503 DLVLALXA 334-513 MOBLALAZ 334-514 WTMPALMA 334-516 MTGMALMT 334-519 MTGMALMT 334-522 GRDNALXA 334-527 BTLYALXA 334-529 MDWYALXA 334-537 LAPIALXA 334-540 FTMRALXA 334-541 ECLCALXA 334-542 SILSALXA 334-548 HYVLALXA 334-562 RAMRALXA 334-563 GOVLALXA 334-564 PTMNALXA 334-565 KSTNALXA 334-566 TROYALMA 334-567 WTMPALMA 334-569 HLVIALMA 334-573 ALBRALXA 334-575 MOVLALXA 334-577 MCCLALXA 334-578 EVRGALMA 334-580 BYMNALMA 334-584 PNLVALXA 334-585 ABVLALXA 334-588 HRFRALXA 334-598 DLVLALXA 334-602 MOBLALSK 334-604 MOBLALAZ 334-605 MOBLALAZ 334-607 MOBLALAP 334-610 MOBLALAZ 334-613 MTGMALNO 334-615 DTHNALXA 334-616 EUFLALMA 334-617 MOBLALSH 334-621 MOBLALSF 334-624 GNBOALMA 334-626 MOBLALSF 334-627 THMTALXA 334-628 UNTWALNM 334-633 MOBLALAP 334-636 THVLALMA 334-639 MOBLALAP 334-641 MOBLALSE 334-645 MOBLALSE 334-649 MOBLALSE 334-653 MOBLALTH 334-660 MOBLALSK 334-661 MOBLALSK 334-666 MOBLALSK 334-667 HRBOALOM 334-670 TROYALMA 334-671 DTHNALXA 334-675 MOBLALSA 334-677 DTHNALXA 334-677 DTHNALXB 334-679 MOBLALSA 334-682 CMDNALXA 334-683 MARNALNM 334-684 GENVALXA 334-687 EUFLALMA 334-690 MOBLALAZ 334-691 CTWDALXA 334-692 WCBGALXA 334-693 HDLDALXA 334-694 MOBLALAZ 334-696 CLMAALXA 334-702 DTHNALXA 334-703 OPLKALMT 334-704 OPLKALMT 334-705 OPLKALMT 334-712 DTHNALXA 334-714 DTHNALXA 334-724 TSKGALMA 334-727 TSKGALMA 334-735 BRNDALXA 334-736 NNFLALXA 334-738 UNSPALXA 334-742 OPLKALMT 334-743 MOVLALXA 334-745 OPLKALMT 334-746 PNAPALXA 334-749 OPLKALMT 334-754 FKVLALXA 334-762 ARITALXA 334-765 EXCLALXA 334-770 MOBLALAZ 334-774 OZRKALXA 334-775 CYTNALMA 334-777 DRPKALXA 334-789 BTRCALXA 334-792 DTHNALXA 334-793 DTHNALXA 334-794 DTHNALXA 334-795 ECHOALXA 334-807 TROYALMA 334-809 BRTOALMA 334-814 ASFRALXA 334-821 AUBNALMA 334-824 BLBTALXA 334-826 AUBNALMA 334-827 FRDLALXA 334-829 MTVRALMA 334-832 MTGMALMT 334-834 MTGMALMT 334-843 GLTWALXA 334-844 AUBNALMA 334-846 MLRYALXA 334-847 CHTMALXA 334-857 KWLGALXA 334-860 MTGMALMT 334-861 DPISALXA 334-862 URIHALXA 334-863 RONKALXA 334-864 LFYTALRS 334-865 GDBAALXA 334-866 CTRNALNM 334-867 BRTOALMA 334-872 SELMALMT 334-873 FWRVALXA 334-874 SELMALMT 334-875 SELMALMT 334-885 RCMLALXA 334-886 SLCMALXA 334-887 AUBNALMA 334-889 NWVIALXA 334-894 NWBCALXA 334-897 ELBAALXA 334-898 SMSNALXA 334-899 ASFRALXA 334-928 FRHPALMA 334-937 BYMNALMA 334-943 FOLYALXA 334-944 MCINALMA 334-946 SMNLALXA 334-947 RBDLALXA 334-948 GLSHALXB 334-949 BNSCALXA 334-952 FOLYALXA 334-953 MTGMALMT 334-957 IRSEALXA 334-962 LLLNALXA 334-963 PNHLALXA 334-964 LXLYALXA 334-965 MGSPALXA 334-966 CSTLALXA 334-968 GLSHALXA 334-973 BLFNALMA 334-981 ORBHALXA 334-983 MLCYALXA 334-986 ELBTALXA 334-989 SRDLALXA 334-990 FRHPALMA 334-992 DXMLALXA 334-994 SWWRALXA 334-996 ORVLALXA 73 de Jerry BHM AmprNet - kd4cim@kd4cim.ampr.org [44.100.113.19] Packet Radio - KD4CIM @ KD4CIM.AL.USA.NA Internet - kd4cim@vulcan.com (or kd4cim@amsat.org) ------------------------------ From: ko@komac.knoware.nl (kS) Subject: Radio Modems For the European License-Free Bands? Date: Wed, 25 Jan 1995 10:34:03 +0100 Organization: V2S What are those bands 9.. Mhz, ... Ghz in Europe? Are there products in these bands to build a >1Mbps wireless digital network? V2S Holland ------------------------------ From: olivier_andrieu@email.franceNet.fr (Olivier Andrieu) Subject: Questions About ADSL and HDSL Date: 25 Jan 1995 12:22:53 GMT Organization: ADIT Hi, Where can I find some informations about the HDSL and ADSL technologies (URLs, Gopher sites, FAQs) ? I am also looking for informations about the integration projects of these technologies in the future Electronic Highways in USA, Australia, Europe, etc. Thanks. ------------------------------ From: andresen@netman.dk (Finn Andresen) Subject: Implementations of the German SISA Specs? Date: 25 Jan 1995 12:49:24 GMT Organization: NetMan A/S, Denmark Hi, I am looking for some information on implementations of the German SISA specifications for management of PDH/SDH equipment. I'm lokking for the following kind of information: 1) Which vendors of PDH/SDH equipment are supporting the SISA specs? This would help us to decide whether to implement an equipment specific solution or to go for a more generic approach. 2) Are there any implementations of the SISA protocol stack available out there (freeware or comercial)? Regards, Finn Andresen E-mail: andresen@netman.dk Netman A/S, Vandtaarnsvej 77 Phone no: (+45) 39 66 40 20 DK-2860 Soeborg, Denmark Fax no: (+45) 39 66 06 75 ------------------------------ From: dimos@ics.forth.gr (Demosthenes Panagopoulos) Subject: Marine Telecom Installation Date: 25 Jan 1995 13:41:49 GMT Organization: FORTH - ICS, P.O.Box 1385, Heraklio, Crete, Greece 71110 I was wondering if anybody whould know of any information source regarding marine teleommunications installations. The question I am facing is the installation of some voice/data lines on a marina. Ideally the boats should be able to dock and hook into the marina network. Are there any special products (connectors, cables, etc.) for marine installations? Are there any other information (standards, past experience)? I would appreciate any help. Thanks, Demos ------------------------------ From: Marie-Louise.Kok@ios.nl Subject: Wireless Networks Organization: NLnet Date: Wed, 25 Jan 1995 14:30:29 GMT IOS Press is pleased to announce the publication of: WIRELESS NETWORKS Catching the mobile future Edited by: J. H. Weber, J. C. Arnbak and R. Prasad Proceedings of two combined conferences held in The Hague, The Netherlands, 18 - 23 September 1994: 5th IEEE International Symposion on Personal, Indoor and Mobile Radio Communications (PIMRC'94 ); ICCC Regional Meeting on Wireless Computer Networks (WCN'94) 1994; 1528 pp. in 4 volumes; paperback; ISBN: 90 5199 193 2 Price: HFL 390; GBP 140; DM 350; US$ 200 The professional fields of Wireless Computer Networks and Personal, Indoor and Mobile Radio Communications have, within a few years, become the fastest growing business area of telecommunications. The papers presented in these volumes on WCN focus on the emerging wireless extensions of intelligent networking and other computer services. The contributions on PIMRC concentrate on the latest developments in radio technologies and network access. If you would like to receive a full list of contents and more information on other telecommunication-books by IOS Press, please e-mail your full mailing address to Marie-Louise.Kok@ios.nl. If you would like to place an order, please e-mail Monique.Mulder@ios.nl IOS Press, Van Diemenstraat 94, 1013 CN Amsterdam, The Netherlands, fax: +31 20 620 34 19 ------------------------------ From: Hersh Jeff Date: Wed, 25 Jan 95 09:25:00 GMT Subject: Difficulty With Atlantic Bell ISDN My office (located in Eatontown, NJ, area code 908) recently had two ISDN lines installed for experimental purposes. We receive our ISDN from a #5ESS. It was obvious, despite what is written about Bell Atlantic in "Reengineering the Corporation," that it is very inexperienced and unorganized in providing ISDN service. All we asked for was two ISDN BRI lines with NT-1s. It took about two months before we were able to get the lines installed, and we have already had to replace the NT-1s once. Anyone else have experience with Bell Atlantic ISDN? Jeff Hersh, Booz, Allen & Hamilton hershj@bah.com ------------------------------ From: bklaas@cha049.ch.intel.com (Brian Klaas) Subject: Value of Motorola flip phone (Microtac 950) Date: 25 Jan 1995 01:50:52 GMT Organization: Intel Corp., Chandler, Arizona Given the fact that phones are given away free with subscription, does an old phone have any value? I changed service and was able to purchase a new phone (the exact same alpha flip phone model) with two batteries for the cost of two batteries. Now, I am left with an old phone. Is taking it apart to see what's inside its only value? Thanks. Brian Klaas ADC Design Automation Intel, Corp. (602) 554-5564 6505 W. Chandler Blvd. Mailstop CH11-91 Chandler, AZ 85226 ------------------------------ Date: Wed, 25 Jan 1995 00:31:32 EST From: John Marinelli Subject: Technical Help Needed With Pending Litigation I need a specific technical question resolved for pending litigation with Bell Canada. Here it is: Is it physically possible to infiltrate a telephone company's network, remotely manipulate the company's switches; process long distance calling; make it appear that those calls originated from a particular site and the subsequently billed to that location? Can anyone answer this question or lead me to the individual(s) that could? Any help will be justly rewarded and sincerely appreciated by yours truly. Please leave a way to get in touch! However, if you prefer to remain unknown, thanks a million, and rest assured that I will respect and protect your anonimity. Thank you for your help in this matter. Regards, John P. Marinelli jmarinel@freenet.niagara.com [TELECOM Digest Editor's Note: Yes, this generally can be done. It is not real easy, and requires a degree of sophistication by someone who knows how to do it. It involves getting into the telephone network using a 'backdoor', using a dialup and passcode. In other words, what I am saying is certain switches have a phone number you can dial into, give the correct passcode, and then manipulate or make changes to the way calls are processed as though you were in the central office itself at a terminal and keyboard. Quite a few telcos have disabled this 'feature' for obvious reasons. I guess some still have it available. I would not have the slightest idea *what* commands/passcode to use, nor the numbers to dial to get into the switch. The commands probably stay the same from one switch to the next more or less, but certainly the phone numbers and passcodes are different. Plus, I strongly suspect anyone fooling around like this leaves tracks all over the place leading back to them. PAT] ------------------------------ From: oehl@student.uni-kl.de (Georg Oehl) Subject: Re: Question on Call-Back Operators Organization: University of Kaiserslautern, Germany Date: Wed, 25 Jan 1995 09:56:12 GMT > [TELECOM Digest Editor's Note: Another problem you did not mention is the > cost of your call to the callback center. That call has to supervise also, > you see, and that costs you some amount of money. Add that to whatever you > pay for the callback part of the connection and let me know how much less > expensive it *really* is. Well, Pat, I tell you how much it is in Germany. Calls to the States from here cost you the (rounded) equivalent of 15 cents for every seven seconds of your phone call. That means billing is in those seven second increments as well; so if you make a phone call of, say, ten seconds you pay 30 cents and give the PTT a gift of four unused seconds. Hence, assuming it is possible to type six buttons on your phone within seven seconds (to enter your PIN), your initial call to the callback company costs you 15 cents. Now for the rates: I have seen Callback services that charge as much as 75 cents a minute; but the chepeast I came across so far was 51 cents per minute with a 30 second minimum and billing in six second increments. And that is without a monthly flat fee, or call surcharge. (Note: This is only for calls _from_ Germany _to_ the US of A.) So, a three minute call the direct way (ie. with "wonderful" German Telekom) costs you about $3.75. (This is all rounded). Using the Callback service it is $1.53 plus the 15 cents I used to call the Callback service, ie. $1.68. That's more than 50% cheaper! Things from France may look a little narrower, because German Telekom, as far as I know, charges the most in Europe, perhaps even in the world (which wouldn't surprise me.) But still -- you can apparently save from France too. > Part of the gimmick that makes callback services so inexpensive is > that you usually do not have to pay for a call to the USA. You dial > your number and hang up without it answering; thus no charge for that > part of the call. Why do you think AT&T was so out of joint on this > for quite awhile? They were? Was unnoticed here. > Hey, if people think they can pay for a supervised > call to the USA (and enter a password, eliminating random ringbacks) and > still get by cheaper than via straight calling through their PTT, whoever > it is, then let me know ... I may start a callback service of my own. Go right ahead. It is cheaper. The more competitors the better. > I have objected to it thus far because I don't want automated callbacks with > all the trouble those have, and I cannot pencil in a bottom line I could > live with if I offered a supervised (both senses of the word, telco charge > for inbound call to set it up and a clerk to oversee it) system. Maybe if > someone really cuts a deal with AT&T -- a very good deal -- they will be > able to accept inbound collect/800 from the distant PTT, establish a call- > back to the distant country and make an outgoing USA call ... and still > make money at it while being competitive. I could not figure out how. PAT] Well, what's the difference (in terms of security) between calling a number, letting it ring a couple of times and calling a number and _letting_ them answer to punch in your PIN? I don't see any. The point you originally tried to make I didn't understand either: misdialed calls. If someone has your Callback number, he stole it or got it in some other illegal way. People can steal Credit Cards or Credit Card numbers too and cause quite some harm to you, although a harm more of the subtle kind -- it doesn't wake you up at three o'clock in the morning. Instead, it lets you sleep and comes in the (later) morning in your credit card bill. Georg [TELECOM Digest Editor's Note: Yes, AT&T was claiming that deliberatly causing a phone to ring then disconnecting amounted to sending coded transmissions without paying for them (which it does). When it was noted that AT&T's own answering machines use 'toll-saver' techniques the same way (if ringing phone does not answer within two rings, disconnect since there are no messages waiting for you), then the company found it difficult to object to others using their network in the same way. The difference between merely calling a number, letting it ring a couple times and hanging up versus dialing a number, waiting for an answer and specifically entering a PIN number is that the former happens how many ever millions of times daily when clumsy people dial wrong numbers and realize it within seconds of finishing the dialing. They then hang up, but the callback switch has no way of knowing if the real user was giving a signal or if some careless person caused that to happen. At least by inserting a PIN, a positive, specific effort has to be made. Most wrong number callers and telemarketing people don't get that far along. PAT] ------------------------------ From: ttm@xs4all.nl (Christian van der Ree) Subject: Re: Telephony Card/Software Needed Date: Wed, 25 Jan 1995 00:29:32 GMT Organization: TTM Nederland > I've seen a couple similar questions posted but haven't seen an > answer. Please post the answer. I'm looking for cards for IBM PCs > that can handle phone calls. I need to be able to program how the > call is handled (when and what to play and record, what to do with > touch tone presses, etc). All I've seen is things for one line. I > want to start with about four lines but have the ability to upgrade to > perhaps 24, so I need multiple (four or eight) lines per card. What > are good vendors for this and where can I go for information? Thanks. The company I'm working for is developer of voice-processing software. We are also distributor of Dialogic Voice hardware. You can start with a two or four lines board and when you need more capacity, you youst plug in extra boards. All Dialogic boards come with manuals and drivers that allows you (if you are a good programmer) to make everthing you want for the DOS OS. Contact us for detailed information and pricing: TTM Nederland Rietveld 10 3641 GS Mijdrecht The Netherlands Tel. +31-297988365 Fax. +31-297981241 Or e-mail full details ------------------------------ From: satyr@bpd.harris.com Subject: Re: Radio Station Transmission Lines Organization: bpd.harris.com Date: Wed, 25 Jan 1995 14:41:27 GMT In article Daniel Ritsma writes: > I am working for a small radio station that is now using two 8kHz > lines to feed four tansmitters (AM). On one line we feed three > transmitters since they are for buildings next to each other; the other > line is for a building some 150 blocks from here. > Does anybody have experience with this? We are located in Manhattan > and NYNEX is not of much help. Getting our current two lines to work > properly without too much loos was already a great victory for us. Contact Harris Allied at (317) 962-8596 They engineer systems for Radio stations and supply equipment from many manufacturers. Should be able to help you out on all of your many possibilities. I must say that I DO work for a sister division of this company, but I think that they can help you out. ------------------------------ End of TELECOM Digest V15 #63 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa06731; 26 Jan 95 1:19 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA19344; Wed, 25 Jan 95 21:04:15 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA19337; Wed, 25 Jan 95 21:04:13 CST Date: Wed, 25 Jan 95 21:04:13 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501260304.AA19337@delta.eecs.nwu.edu> To: telecom Subject: TELECOM Digest V15 #59 TELECOM Digest Tue, 24 Jan 95 15:15:00 CST Volume 15 : Issue 59 Inside This Issue: Editor: Patrick A. Townson **REMAILED SINCE VARIOUS READERS REPORTED NOT RECEIVING THIS ISSUE WHEN** **FIRST MAILED ON TUESDAY AFTERNOON. IF DUPLICATE TO YOU, PLEASE DISGARD** Re: LD Termination Fees to RBOCs (John Lundgren) Re: LD Termination Fees to RBOCs (G. Straughn) Re: LD Termination Fees to RBOCs (Fred R. Goldstein) Re: LD Termination Fees to RBOCs (Ed Goldgehn) Re: LD Termination Fees to RBOCs (Judith Oppenheimer) Re: Cellular Fraud: How Much of it is Real Money? (Barry Margolin) Re: Cellular Fraud: How Much of it is Real Money? (Peter Knoppers) Re: Cellular Fraud: How Much of it is Real Money? (Paul Houle) Re: T1 vs. T3: What's the Difference? (John Dearing) Re: T1 vs. T3: What's the Difference? (John Lundgren) Re: Areas Covered by Phone Book? (John Levine) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: jlundgre@kn.PacBell.COM (John Lundgren) Subject: Re: LD Termination Fees to RBOCs Date: 24 Jan 1995 15:08:11 GMT Organization: Pacific Bell Knowledge Network Pete Norloff (eyegaz1@ibm.net) wrote: > I'm looking for some information on the sharing of long distance fees > between long distance carriers and the RBOCs. I've found casual > references which indicate that the long distance carriers pay the > RBOCs approximately 25% each of the fees collected for long distance > calls and keep 50% for themselves. This 25% was referred to as > something like "line termination charges". It's the payment to the > local carrier for connecting one end of the call. I heard somewhere that this might have something to do with the number of connections that the RBOC supplies. There don't have to be as many connections to the long distance carriers as there are subscribers. > I'm hoping to find an authoritative reference to help me in an > argument with a Bell Atlantic engineer. This engineer believes that > Bell Atlantic is providing the terminating end of long distance calls > to the long distance carriers for free. I know I'm paying something like $3.50 a month to be connected to the LD carriers. At one time, it was something like $2, and was upped to $3.50. Maybe the difference at one time was paid by the LD carriers but it was later shifted to the subscribers. I think it had something to do with the old AT&T Long Lines high profits funding the local exchanges (before breakup). I know that my next bill will have another couple bucks added to the basic service charges to make up for the money lost from letting the LD carriers compete for intraLATA toll calls. That's going to make a lot of old ladies unhappy. I'm not pleased about it either, but I can afford it. Our district, with $30K bill, will be getting a four percent raise. That's about $1200 a month. I guess I should be happy. But the Pac Bell reps say that it will be a wash when the toll rates are factored in. Hmmm. > Anyone have any information on this topic? Just mostly rumor and hearsay, and a decade of faded memories. John Lundgren - Elec Tech - Info Tech Svcs Rancho Santiago Community College District 17th St. at Bristol \ Santa Ana, CA 92706 jlundgre@pop.rancho.cc.ca.us\jlundgre@kn.pacbell.com ------------------------------ From: gregs@best.com (g straughn) Subject: Re: LD Termination Fees to RBOCs Date: Tue, 24 Jan 1995 09:40:06 -0800 Organization: BEST Internet (415) 964-2378 In article , eyegaz1@ibm.net wrote: > I'm looking for some information on the sharing of long distance fees > between long distance carriers and the RBOCs. I've found casual > references which indicate that the long distance carriers pay the > RBOCs approximately 25% each of the fees collected for long distance > calls and keep 50% for themselves. This 25% was referred to as > something like "line termination charges". It's the payment to the > local carrier for connecting one end of the call. In California, Pacific Bell charges $0.0142 per minute of "terminating access" to all IEC's, this rate is regulated at the FCC and I suspect Bell Atlantic has a similar tariff on file at the FCC. Greg S. ------------------------------ Date: Tue, 24 Jan 1995 00:37:58 -0500 From: Fred R. Goldstein Subject: Re: LD Termination Fees to RBOCs eyegaz1@ibm.net (Pete Norloff) asks, > I'm looking for some information on the sharing of long distance fees > between long distance carriers and the RBOCs. I've found casual > references which indicate that the long distance carriers pay the > RBOCs approximately 25% each of the fees collected for long distance > calls and keep 50% for themselves. This 25% was referred to as > something like "line termination charges". It's the payment to the > local carrier for connecting one end of the call. In the olden days (before 1984's FCC-mandated rules change, which coincidentally was the same time as the Bell breaksup), there were "separations and settlements" in which the overall toll revenues were divided based upon a complex formula. Nowadays, the local companies use certain formulas to justify the rates they charge for "access" by LD carriers. When an inter-LATA call is carried from and/or to a local carrier, the inter-LATA carrier pays a tariffed rate. The last time I looked, the lowest rates were just over 3c/minute for either the originating or terminating end (thus over 6c/minute for both ends), but up to around 5c/minute for some telcos. There may also be a distance charge for intra-LATA calling TO the carrier's POP; typically this is 1/100 of a cent per minute per mile. That's their real "toll" cost base! In a few obscure cases (very small telcos) the price can be much higher, so the interexchange carrier is guaranteed to lose money on it. (America's Network columnist Art Brothers owns one such telco, Beehive Tel in Utah, which has extremely high costs and thus can charge something like 90c/minute to terminate calls there.) If a customer has direct access to an interexchange carrier switch (say, a T1 into the POP), thus not using (let's not use the "b word", bypass, here) the local Bell's switched network, the fee is avoided. Most big 800 numbers work that way, so only the consumer (caller) end invokes a Bell charge. The flip side is that for intra-LATA toll calls, a customer who hooks up as a carrier gets a lower price (3-5c/minute) than almost anybody's intra-LATA WATS rate. This is not impossible for a large user (there's a game called "rusty switch" in case you need to leave the LATA) so intra-LATA tolls are being forced down. NYNEX, at least, understands this and charges only around 5c/minutes for bulk business toll, and actually encourages big users to go directly to their own toll switches and hook up as carriers do for around 3c/minute. ------------------------------ From: edg@ocn.com (Ed Goldgehn) Subject: Re: LD Termination Fees to RBOCs Date: 24 Jan 1995 16:10:23 GMT Organization: The INTERNET Connection, LLC All fees charges for LD termination can normally be found in the Feature Group tariffs. Normally, LD carriers fall under (last I heard) Feature Group 'D' tariffs due to their method of termination. You can request a copy of these tariffs from each of the RBOC's or from the PUC in any State. BTW, the method of charges is entirely different for LD service in the cellular industry. With cellular, it is not unusual for local cellular carriers (RBOC's or otherwise) to provide FREE or flat rate termination charges to LD carriers. Ed Goldgehn E-Mail: edg@ocn.com Sr. Vice President Voice: (404) 919-1561 Open Communication Networks, Inc. Fax: (404) 919-1568 ------------------------------ From: producer@pipeline.com (Judith Oppenheimer) Subject: Re: LD Termination Fees to RBOCs Date: 24 Jan 1995 13:56:27 -0500 Organization: Interactive CallBrand(TM) Pete, you're absolutely right and this is a GIANT issue and always has been. This is known as "access charges" and is a basic feature of the phone charges. WHY DO YOU THINK THE LD CARRIERS ARE SO INTERESTED IN WIRELESS? It bypasses the local access charges and they keep the whole banana. This is a major threat to Local that is struggling anyway. This is the most likely reason RBOC's will get relief against the prohibition on doing long distance. Because: 1. Technically LD carriers will be providing local service which is prohibited too. 2. Local Service providers will have to jack up rates to survive and that angers users who for the most part don't make long distance calls (95% of all traffic is local, 40% of LD is to 800 numbers.) 3. The local rates have already been jacked up because those companies have lost the off setting revenue they use to get from LD before divestature, so angry localities are demanding competition for local service just like there is competition for LD. To do that would drive prices down even further and really kill the RBOC's. 4. Local's revenue stream is from access charges. To their benefit though, they do get the fee even if the call isn't completed. RBOC's will have to be allowed to do long distance, provide information services, provide video delivery and anything else they can to off set lost access charges. Judith Oppenheimer, Producer@Pipeline.com ------------------------------ From: Barry Margolin Subject: Re: Cellular Fraud: How Much of it is Real Money? Date: 24 Jan 1995 11:15:26 -0500 Organization: NEARnet, Cambridge, MA In article md@pstc3.pstc.brown.edu (Michael P. Deignan) writes: > Can you really say when a fraudulent call is placed that the loss is > $.50? Not really. Loss implies that you're depriving the company of > something that they otherwise couldn't sell. In a cell call case, its > bandwidth. Unless bandwidth is saturated, the "fraudulent" cell call > is simply using unoccupied bandwidth that would simply be assigned to > a legit call. It's not quite that simple. Telecommunications providers generally engineer their network so that the bandwidth should never be saturated; it's common to target something like 40-60% load. So if fraudulent calls increase the load on the network, the carrier will have to increase the capacity to accomodate it. This costs money, but because the calls are fraudulent there's no corresponding income to pay for it. This is precisely the same as any other kind of theft: the vendor fails to receive income when someone gets something that the vendor paid for. Barry Margolin BBN Internet Services Corp. barmar@near.net ------------------------------ From: knop@dutecai.et.tudelft.nl (Peter Knoppers) Subject: Re: Cellular Fraud: How Much of it is Real Money? Date: 24 Jan 1995 13:37:18 GMT Organization: Delft University of Technology, Dept. of Electrical Engineering The preceding discussion compared cellular fraud with making illegal copies of software or tapping the signals from the cable television company. I believe that those cannot be compared because cellular phone facilities and the cable television signals can easily be pro- tected from fraud or theft without hampering the legitimate users, unlike software, where copy-protection invariably reduces the use- fullness and attractiveness of the product. A cellular phone or cable television facility is a product that has value. Protection from fraud is technically feasible and affordable and does not reduce the usefullness of the system. (In fact increased protection from fraud _increases_ the attractiveness by reducing the probability that customers are billed for calls that they did not make.) The fact that the providers of cellular phone systems do not protect their product suggests that said providers make more profit from the product in its current state than they would if the product was adequately protected. The legitimate users pay part of the cost of the fraud. More is paid by the taxpayers through the provision of police and justice systems that track down and prosecute phreakers. Using taxpayer's money to track down and prosecute phreakers should stop until the providers of cellular phone systems add _reasonable_ protection from fraud to their product. Customers of those cellular phone companies (should) know that each bill must be scrutinized and anticipate to dispute billing errors. If they do not want the hassle, customers should select a provider that has a better product. Cable companies can protect their product from unauthorised use (i.e. theft) at a reasonable price without hampering legitimate users. Regretfully, software producers do not have this luxury, therefore it is acceptable that software producers rely (in part) on the police and justice systems to control illegal copying. Generally, everyone is obliged to make a reasonable effort to protect his or her products and properties from theft, vandalism or misuse. The police and justice systems are public services for cases where reasonable protection fails, or is impossible. Peter Knoppers - knop@duteca.et.tudelft.nl ------------------------------ From: ph18@crux2.cit.cornell.edu (Paul Houle) Subject: Re: Cellular Fraud: How Much of it is Real Money? Date: Mon, 23 Jan 1995 22:12:09 -0500 Organization: Cornell University > [TELECOM Digest Editor's Note: Does it matter, Paul? Does it really > matter? Should stealing someone's 'profits' be any less severe an > offense than stealing their actual cash? You may not be condoning cell- > ular phone fraud, but you sure know how to speak the language of the > phreaks and hackers.] I think it does matter, because when companies hue and cry about fictional losses they add to the cloud of media distorsions about technology. To take an example, a friend of mine brought an AP story to my attention today about an "attack" on the internet that makes it possible for people to "steal information" and makes it sound like it is a really great crisis that is a fantastic threat to the "information superhighway", that people are going to tap future commerical traffic on the internet to steal credit card numbers and so forth. Now it's certainly true that people are doing things like this, but our beef with the article is that this has been going on as long as there has been an internet, as long as we've had data networks, and that it's something that we're going to live with as long as we have data networks. The media plays up particular incidents as if they were world shattering, as if they were warning us that there is a band of cocaine-crazed Lybian terrorists hiding an atomic bomb in somebody's basement, instead of recognizing individual network 'incidents', computer viruses and so forth as rather common events: not any more newsworthy in themselves then would be individual muggings in central park. What the media ought to be doing is to put electronic intrusion, vandalism and crime into context, how this is a problem inherent in our social organization and technology and that it's something that we have to find ways to live with, instead of something that we should be cowering in fear about. Similarly, every few months, some paper somewhere prints a story about the discovery of a "vast pornographic computer network" with 8 million users, thousands of sites and so forth. That's right, somebody just stumbled onto the alt.sex hierarchy or a secret cache of porno GIF's, so now your local paper prints that the local research university has not only been corrupted by post-modernist deconstructionalist Marxist English professors, but adding insult to injury, is part of an international porn conspiracy called USENET. There's no mention, of course, that you can also read comp.dcom.telecom, rec.arts.startrek.tech, sci.chemistry, comp.os. linux.announce, or even alt.angst! [Except of course, when an AT&T PR man told the media that people from the "network" (meaning comp.dcom.telecom) who were communicating and complaining about the USA Today 800/900 incident were people who were interested in "getting something for nothing". (Remember that Pat?)] More recently, we can consider media coverage of the Canter & Siegel affair, heroes of the {Wall Street Journal} editorial page right up there with Milton Freedman, Arthur Laffer and Margaret Thatcher. It hurts the electronic community when software publishers wildly overestimate their "losses" due to software piracy. It leads to alarmism, crippled shareware, and looses dongle-peddling charlatans on the street. [Why don't dongle ads show the twenty-odd dongles that you'd have hanging off your parallel port if every software publisher used dongles? A fellow worker had what amounted to a cute little CNC milling machine that cut traces out of circuit boards; it was controlled by a propreitary piece of software that ran on an IBM PC -- and even though the software was only useful to control a piece of hardware manufactured by one company, it was still "protected" with a dongle!] Digital storage and communications create a crisis in intellectual property, this is a technological fact. Our society needs to find some way to protect the rights of people that produce information products and those that use them -- and when industry screams like chicken little about hypothetical losses, it doesn't help us think clearly about the problem. It is the same thing with the cellular phone companies; the problem of cellular phone fraud is real; but if they want the public [including the police, regulators, etc] to be part of the solution, they'd best come clean about the economics of cellular phones. ObAnswer: To directly address Paul Robinson's question, I had the impression that an awful lot of cellular phone phraud is directed out-of-the-country, particularly to third-world countries that have absurdly high phone rates. According to a phriend, a cloned phone is typically going to cost an "end user" something in the $100-$300 range, though people sometimes program phones for less (like $50 or so); you have to talk a ~long~ time to justify that cost making local and long distance calls in the US. Compare this to a typical cost of $8 or so for a code. Unless Colombian Dial-a-Druglord and Bangladesh Telegraph and Telephone are remarkably forgiving, I think cellular phone carriers ~are~ paying for those calls. ------------------------------ From: jdearing@netaxs.com (John Dearing) Subject: Re: T1 vs. T3: What's the Difference? Date: 24 Jan 1995 04:40:12 GMT Organization: Netaxs Internet BBS and Shell Accounts Alan Jackson (alan@sccsi.com) wrote: > What's the difference between the two as far as the user is concerned? In a word, SPEED. In another word, COST. T1 gives you a 1.544MB/sec circuit. T3 is a 45MB/sec circuit. The prices for the terminal gear that goes on the end of a T1 have come down a lot over the last few years as more companies start using T1's. The end user market for T3 terminal gear is still pretty small (but growing). One application (besides Internet backbone trunks) that is pushing the use of T3's is full-motion commercial broadcast quality video conferencing. John Dearing jdearing@netaxs.com ------------------------------ From: jlundgre@kn.PacBell.COM (John Lundgren) Subject: Re: T1 vs. T3: What's the Difference? Date: 24 Jan 1995 00:04:16 GMT Organization: Pacific Bell Knowledge Network Alan Jackson (alan@sccsi.com) wrote: > What's the difference between the two as far as the user is concerned? ^$$^ Bye-bye! Lotsa difference in $. If you can't afford either one, why bother to ask ... Don't quote me on this, but I think there's a difference of 28 times the data thruput between them. T-3 = 28 T-1's and then some. John Lundgren - Elec Tech - Info Tech Svcs Rancho Santiago Community College District 17th St. at Bristol \ Santa Ana, CA 92706 jlundgre@pop.rancho.cc.ca.us\jlundgre@kn.pacbell.com ------------------------------ From: johnl@iecc.com (John Levine) Subject: Re: Areas Covered by Phone Book? Date: Tue, 24 Jan 95 02:56:14 GMT > A typical phone book with both white and yellow pages has a > map with a large white area surrounding a smaller yellow area. > What is this map trying to tell me? Around here, NYNEX makes big bucks by having zillions of different Yellow Pages, far more than they have white pages. For example, the West Suburban white pages are available by themselves, or bound with three different sets of yellow pages for subareas of the area covered by the white pages. So the map means what it seems to, the white pages cover a larger area than the yellow pages. Regards, John Levine, johnl@iecc.com Primary perpetrator of "The Internet for Dummies" ------------------------------ End of TELECOM Digest V15 #59 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa07376; 26 Jan 95 2:28 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA20431; Wed, 25 Jan 95 21:54:36 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA20424; Wed, 25 Jan 95 21:54:32 CST Date: Wed, 25 Jan 95 21:54:32 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501260354.AA20424@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #64 TELECOM Digest Wed, 25 Jan 95 21:54:30 CST Volume 15 : Issue 64 Inside This Issue: Editor: Patrick A. Townson Service Outage ND and MN (Kevin Bluml) Telebit Introduces Two V.34 Modems (Eileen Lin) UC Berkeley Short Courses on Communication (Harvey Stern) AT&T LD Carrier CID Question (Terrence McArdle) Cellular Provider in Israel (Isaiah W. Cox) RS449 - Help Please! (Vadim P. Kikin) WAN Employment Opportunities (Bobby Lowe) Alpha Paging via PC (Kevin Kadow) GSM SIM Simulator Suppliers Wanted (Gurj Bahia) Re: Old Phone Number Format (Wes Leatherock) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Wed, 25 Jan 95 10:40:33 CST From: kevin@carina.cray.com (Kevin Bluml) Subject: Service Outage ND and MN Phone service to Moorhead, Minnesota and portions of Fargo, North Dakota is still out after someone cut at least five different major cables in the Fargo area over the weekend. Most of the service lost is in Minnesota even though the cuts were in North Dakota. Some cables were above ground, others were in manholes. Most were cut in several places so simple splicing is not possible. Some of the cables were up to five inches in diameter. Full service has been restored as of Tuesday night to the Fargo area, with only 911 service and long distance service restored to Moorhead, full service is expected to be restored by Saturday. Emergency services had cellular service available and instructed people needing assistance to go to the local fire stations or police stations to seek help. I have not heard of any emergencies that were worsened due to this, but many areas in northwestern MN had no dial tone for several days. I believe as many as 500,000 people were impacted by this at one time or another. The police and FBI are looking for a suspect in a burglary of a stereo store from Saturday night where the alarm wires where also cut. Initial suspicions were that it was someone with knowledge of the system due to the way things were damaged, however the current burglary suspect is not a past telco employee according to current reports. From: Kevin V. Bluml - Cray Research Inc. 612-683-3036 USmail - 655 - Lone Oak Drive, Eagan, MN 55121 Internet - kevin.bluml@cray.com UUCP - uunet!cray!kevin ------------------------------ From: eileen@telebit.com (Eileen Lin) Subject: Telebit Introduces Two V.34 Modems Organization: Telebit Corporation; Sunnyvale, CA, USA Date: Wed, 25 Jan 1995 15:41:08 GMT Contact: Direct Marketing Dept., Telebit Corp. Tel: 408/734-4333 or 800/835-3248 Fax: 408/734-3333 Internet: sales@telebit.com TELEBIT INTRODUCES TWO V.34 MODEMS SUNNYVALE, Calif., Jan. 16, 1995 -- Telebit Corporation, a leader in the on-demand remote access industry, today announced that its FastBlazer 8840 modems now support the ITU-T V.34 standard. The FastBlazer(R) 8840 is designed for environments where large central site modem requirements include reliability, comprehensive network management, high speed and global homologation. In addition, today the company introduced the TeleBlazer, a V.34 modem designed for remote users dialing into LANs who want to take advantage of increased speeds. Product Features: Features of the FastBlazer 8840 include: - Speeds of up to 28.8 Kbps uncompressed and up to 115.2 Kbps with compression - Support for V.34, V.32terbo and eight other ITU-T and Bell standards - Flash memory for simple upgrades - Simple on-site configuration, control and monitoring via an 18-button front panel keypad and LCD display - Extensive command set and configuration parameters - Automatic single-call dial restoral of leased lines - Full configuration, control, testing and monitoring of FastBlazer rackmount modems via Telebit's ViewBlazer (R) network management system - Full compatibility with Telebit's NetBlazer(R) family of dial-up routers - Available in standalone and rackmount versions - Conformity to worldwide regulatory requirements - Extensive global homologation plans TeleBlazer features include: - Speeds of up to 28.8 Kbps uncompressed and up to 115.2 Kbps with compression - Support for V.34, V.FC and eight other ITU-T and Bell standards - Support for 14.4 Kbps fax transmissions - V.42bis and MNP 5 data compression - Full compatibility with Telebit's NetBlazer(R) family of on-demand routers - MNP 10 with `Adverse Channel Enhancement' for reliable cellular communications Price and availability The FastBlazer 8840 Standalone and FastBlazer 8840 Rackmount are available at the end of January 1995 and have a list price of $1,199 (U.S.). Telebit's TeleBlazer is also available at the end of January 1995 and has a list price of $399 (U.S.). V.34 support can be added to the FastBlazer through a free software upgrade that is available through Telebit's Customer Service bulletin board. The telephone number for the Chelmsford, MA bulletin board is 508-656-9103; to contact the Sunnyvale, CA bulletin board, phone 408-745-3707 or 408-745-3861. Telebit Corporation designs, manufactures and markets a family of remote network access products to enable cost-effective extension of LANs to remote users. The company has offices in the United States and Europe and markets its products and services worldwide through value-added resellers, wholesale distributors and OEMs. Telebit is traded on the Nasdaq exchange under the symbol TBIT. Telebit, FastBlazer, ViewBlazer and NetBlazer are registered trademarks of Telebit Corporation. ------------------------------ From: southbay@garnet.berkeley.edu Subject: UC Berkeley Short Courses on Communication Date: 25 Jan 1995 18:20:13 GMT Organization: University of California, Berkeley U.C. Berkeley Continuing Education in Engineering Announces 3 Short Courses on Broadband Communications, Wireless Networks MODERN TELECOMMUNICATIONS: Wide Area Networks, Personal Communication Systems, Network Management and Control, and Multimedia Applications (March 2-3, 1995) This course is designed as a gentle but comprehensive overview of telecommunications including current status and future directions. This course traces the evolution of telecommunications, starting from its voice roots and progressing through local, metropolitan, and wide area networks, narrowband ISDN, asynchronous transfer mode, broadband ISDN, satellite systems, optical communications, cellular radio, personal communication systems, all-optical networks, and multimedia services. Lecturer: Anthony S. Acampora, Ph.D., Professor, Electrical Engineering, Columbia University. He is Director, Center for Telecommunications Research. He became a professor following a 20 year career at AT&T Bell Laboratories, is an IEEE Fellow, and is a former member of the IEEE Communications Society Board of Governors. SONET/ATM-BASED BROADBAND NETWORKS: Systems, Architectures and Designs (March 29-31, 1995) It is widely accepted that future broadband networks will be based on the SONET (Synchronous Optical Network) standards and the ATM (Asynchronous transfer Mode) technique. This course is an in-depth examination of the fundamental concepts and the implementation issues for development of future high-speed networks. Topics include: Broadband ISDN Transfer Protocol, high speed computer/network interface (HiPPI), ATM switch architectures, ATM network congestion/flow control, VLSI designs in SONET/ATM networks. This course is intended for engineers who are currently active or anticipate future involvement in this field. Lecturer: H. Jonathan Chao, Ph.D., Associate Professor, Brooklyn Polytechnic University. Dr. Chao holds more than a dozen patents and has authored over 40 technical publications in the areas of ATM switches, high-speed computer communications, and congestion/flow control in ATM networks. NETWORKS FOR DIGITAL WIRELESS ACCESS: Cellular, Voice, Data, Packet, and Personal Communication Systems (March 6-8, 1995) This comprehensive course is focused on the principles, technologies, system architectures, standards, and market forces driving wireless access. At the core of this course are the cellular/microcellular/ frequency reuse concepts needed to enable adequate wireless access capacity for Personal Communication Services (PCS). Presented are both the physical-level issues associated with wireless access and the network-level issues arising from the inherent mobility of the subscriber. Standards are fully treated including GSM (TDMA), IS-54 (North American TDMA), IS-95 (CDMA), CT2, DCT 900/CT3, IEEE 802.11, DCS 1800, and Iridium. Emerging concepts for wireless ATM are also developed. This course is intended for engineers who are currently active or anticipate future involvement in this field. Lecturer: Anthony S. Acampora, Ph.D., Professor, Electrical Engineering, Columbia University. He is Director, Center for Telecommunications Research. He became a professor following a 20 year career at AT&T Bell Laboratories, is an IEEE Fellow, and is a former member of the IEEE Communications Society Board of Governors. For more information (complete course descriptions, outlines, instructor bios, etc.) send your postal address or fax to: Harvey Stern or Loretta Lindley U.C. Berkeley Extension/Southbay 800 El Camino Real Ste. 150 Menlo Park, CA 94025 Tel: (415) 323-8141 Fax: (415) 323-1438 ------------------------------ From: mcardle@paccm.pitt.edu (Terrence McArdle) Subject: AT&T LD Carrier CID Question Date: Wed, 25 Jan 1995 14:09:27 -0500 Organization: University of Pittsburgh Medical Center I have seen articles indicating the LD carriers WilTel and US West (at least in Phoenix area) forward CID information interstate. Does anyone know if the major LD carriers, notably AT&T, Sprint, & MCI, foward CID information interstate? As secondary questions, (1) can anyone tell me if the areas of Louisville, KY and Cincinatti, OH can send the CID information and (2) whether Pennsylvania (that CID-fearful state) will accept the information? The Bell Atlantic person told me that PA switches suppress CID information on INTER-LATA calls, but my understanding is that this is only an outgoing suppression, not an incoming supression. Specifically, I'm interested in pinning down why I get an out-of-area message on calls from Louisville, KY to my number in Pgh, PA. They use MCI, I use AT&T. Thanks for the info/experiences, Terry McArdle email mcardle@paccm.pitt.edu Mgr, Information Systems work (412) 648 9218 Pulmonary, Allergy, and Critical Care University of Pittsburgh Medical Center ------------------------------ From: Isaiah@borealis.com (Isaiah W. Cox) Subject: Cellular Provider in Israel Date: 25 Jan 1995 22:30:33 GMT Organization: The Direct Connection (Call London, 0181 317 2222 for demo) Bezek has a cellular competitor -- they are like $0.03/minute in Israel, which beats the pants off of Bezek. I know these phones are selling well -- but I have been unable to find people selling them! I know that the venture is jointly done by Southwestern and Cellcom (not the one is Wisconsin). So if I could get an e-mail address for Southwestern Bell, I could track this down. If anyone could help, it would be most appreciated. Thanks, Isaiah [TELECOM Digest Editor's Note: Sometimes it is simply easier to call on the phone than it is to look all over for an email address. Have you considered calling their offices in St. Louis, finding out where their cellular headquarters is located, then calling there? PAT] ------------------------------ Organization: UGTU-UPI From: Vadim P. Kikin Date: Wed, 25 Jan 95 18:18:24 +0300 Subject: RS449 - Help Please! Hi friends, I want to connect my hardware to a sort of cisco router. They say I have to match my output connector with RS449 interface. I couldn't find any hints what RS449 is. People who own the router cannot help me.Can anybody give me advise were to look for schematic of connections with RS449 and its signals description? Every help will be appreciated: hints on Internet locations of docs, titles of printed books or articles etc. Thanks in advance. Regards, Vadim Kikin Department of Transmitting devices Ural State Technical University Ekaterinburg, 620002 Russia Email: vad@rpu.rcupi.e-burg.su ------------------------------ From: lowekawk@onramp.net (B. LOWE) Subject: WAN Employment Opportunities Date: Wed, 25 Jan 1995 19:43:24 +0000 Organization: emjay Network Application Engineer - Integration of Network Application in WAN Network Design Engineer - Design a Cell Swithching Backbone Network Network System Engineer - Integration of WAN systems tools Satellite/Wireless Engineer - Design and Integration ( x.25, Frame Relay, TCP/IP) DEGREE REQUIRED, Masters Degree preferred THE OPPURTUNITY!: Major Partnership to build a Worldwide Network Service Company to provide Frame Relay, x.25 and Cell Backbone Network Services. This network will reach over 100 countries and will utilize state of the art technology. Great growth potential for the company as well as the individual employees. Call BOBBY @ (713)529-5000 or FAX(713)529-0141 OR lowekwak@onramp.net ------------------------------ Date: Wed, 25 Jan 95 21:00 CST From: kadokev@rci.ripco.com (Kevin Kadow) Subject: Alpha Paging via PC Organization: Ripco Internet BBS, Chicago [TELECOM Digest Editor's Note: The original message shown below did not appear in this Digest. PAT] In article <3fsmd0$2ajo@usenetp1.news.prodigy.com>, Robert Babcock v wrote: > I have a Motorola advisor pager, it is an alpha/numeric pager is > there any way to send a message to my pager via a pc? A friend who > used to work for a local messenger service said that it is possible. > He said that he would type a phone number for the local transmitting > tower and type in the message and that would send the text to the > pager. Well if anybody has got any info on this please let me know. You need the modem number for the paging company; usually it connects at 300 or 1200 baud. At least for the system I use the pager ID is the same as the phone number for the pager. A MS-DOS program for paging is available from ftp.ripco.com: /pub/msdos/comm/acspg31.zip [TELECOM Digest Editor's Note: A new service started here on the net is also worth exploring. Send email to info@internet.net. Or perhaps Doug Reuben will see this message and reply directly to the writer. PAT] ------------------------------ From: Gurj Bahia Subject: GSM SIM Simulator Suppliers Wanted Date: 25 Jan 1995 16:30:14 GMT Organization: Fujistu Systems Europe Ltd Anyone know if there are any other GSM SIM Simulator providers apart from GemPlus and Orga ? Please email me at the address below. Thanks, Gurj Bahia email: gurj@fujitsu.co.uk smail: Mobile Radio Division, Fujitsu Europe G S M Telecom R & D Centre Ltd.2 Longwalk Rd, Global Stockley Park, Middx, UB11 1AB, U.K. System for phone: 0181-6064523 (natl) Mobile com. +44-181-6064523 (intl) ------------------------------ From: wes.leatherock@oubbs.telecom.uoknor.edu Date: Wed, 25 Jan 95 15:47:25 Subject: Re: Old Phone Number Format Question Quoting Andrew C. Green > The following question appeared recently in the Old Time Radio > Digest mailing list, and seems tailor-made for an answer from this > forum. > From: "Richard M. Weil" > The number for the store in Rockford was curiously 8-22-47. I'm > too young to know anything about 5 digit phone numbers. Is that > how it was back then in small cities? > [TELECOM Digest Editor's Note: > It was in fact a Philco (for anyone interested, that was our > friends at Phillips) [ ... } I must respectfully disagree with Pat on this. Philco was a big U.S.A. appliance company not connected, at least at that time, with the Netherlands electronic giant N.V. Philips (not Phillips). "Philco" was formed from the company's original corporate name, the Philadelphia Storage Battery Company, and was one of the biggest manufacturers of radios in the 1930s and probably earlier. Perhaps they got into radios as allied to their battery business, since radios, at least home radio receiver, originally were all battery operated. It is my recollection that they became a major player in the television business because in the 1930s they acquired the rights to the patents of Philo T. Farnsworth, who had invented a television system entirely compatible with, but not the same as, the system invented by Vladimir Zworkin, the RCA genius. Farnsworth invented his system at age 16 and was granted the key patent at age 22. Some commentators have suggested he has largely been dropped out of the history of television because the idea that this callow youth could have developed a system that worked as well as the system developed by great corporate laboratories staffed with multiple Ph.D.'s is inconsistent with the supposed value of extensive higher education and big R&D expenditures, and the big embarrassment this caused RCA. Philco, I believe, was the only manufacturer that didn't have to pay licensing fees to RCA, although I think they later reached a cross-licensing agreement with RCA. Philips, the Netherlands company, was not very well known in the United States before World War II. During World War II, after the Netherlands was occupied by Germany, their American operation became separate under the name North American Philips Company, which used the trade name Norelco. But Pat's description of the early television sets and how they developed is right on the mark. > Five digit numbers were common in communities which had automatic > dialing systems in those days but only one exchange in the > community. Since the exchange name was always the same, it was > assumed when dialing. In your example you parsed the number > incorrectly. It was 8-2247, or to be complete about it, > ROckford-8-2247. I couldn't speak to the situation in Rockford, but I'm very familiar with Oklahoma City, which had five-digit numbers for many years, starting in 1920 when the "Northwest" office was put into service as the first dial operation in the city (and the first central office outside the downtown area). The downtown office was all manual, with exchanges Maple and Walnut (not MAple and WAlnut; they were manual exchanges and you spoke their names to the operator). The manual numbers were the exchange name plus one, two, three or four digits: Maple 5, or Walnut 4434. Maple 5, for example, was not Maple 0005; it wouldn't have had any meaning in a manual exchange. The "Northwest" office (it's really part of the inner city now) had five-digit numbers starting with 4, such as 4-1468. But there was no name associated with that; there was no toll dialing and it was just 4-1468 in Oklahoma City; not Oklahoma City 4-1468. The downtown office was cut over to dial in 1928, using the prefixes 2 and 3. Tulsa had a different history, and right up until the days of 2L-5N numbering (seven digits expressed as two letters and five numerals) in the 1950s or 1960s, had four, five and six digits numbers. In a small town I lived in (Konawa, Oklahoma, one of the first CDOs in Oklahoma) the numbers were three and four digit. My home number was 287; office 234. Four digit numbers there were party lines; the central office was terminal per line and the fourth digit selected the type of ringing. It's true that Bell companies usually recommended printing five digit numbers as "8-2247," as Pat said, and six digit numbers as "54-1468." But it was variable; Dallas and Houston expressed their numbers as, for example, Riverside-4085, which was dialed as R-4085. But not too many telephones outside the largest metropolitan areas had letters on the dial in those days. And independent companies often recommended displaying numbers in different ways, such as 8-22-47, or 82-247. "All Number Calling" (ANC) (seven numerals) came after the 2L-5N (two letter and five number) arrangement, usually in the 1960s or thereabouts. Wes Leatherock wes.leatherock@oubbs.telecom.uoknor.edu wes.leatherock@f2001.n147.z1.fidonet.org ------------------------------ End of TELECOM Digest V15 #64 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa08948; 26 Jan 95 3:18 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA21958; Wed, 25 Jan 95 22:51:07 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA21945; Wed, 25 Jan 95 22:51:04 CST Date: Wed, 25 Jan 95 22:51:04 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501260451.AA21945@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #65 TELECOM Digest Wed, 25 Jan 95 22:51:00 CST Volume 15 : Issue 65 Inside This Issue: Editor: Patrick A. Townson Re: Cellular Fraud: How Much of it is Real Money? (Dan J. Declerck) Corporate Creativity, was Re: Cellular Fraud: How Much is Real? (C. Jones) Re: Five Digit Phone Numbers (Linc Madison) Re: Freephone Forum vs. ITU Question (David Leibold) Re: Northern TeleCom Norstar Key System (sherim@delphi.com) Re: Internet Mail With Half the Address? (Ted Timar) Re: Help Needed With Displaying X Windows (Daniel R. Oelke) Re: Where to Find tpage? (John R. MacLeod) Re: Areas Covered by Phone Book (Wes Leatherock) Re: Radio Station Transmission Lines (Ron Kritzman) Re: GSM Cellular Operators List (Spiros Triantafyllopoulos) 28.8k bps Modem (Victor Hu) What is an STD Coupler? (Richard Palmer) Re: Voice File Formats (Steve Rothkin) Re: Telephony Card/Software Needed (moshtr@rockdal.aud.alcatel.com) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: declrckd@cig.mot.com (Dan J. Declerck) Subject: Re: Cellular Fraud: How Much of it is Real Money? Date: 25 Jan 1995 18:45:20 GMT Organization: Motorola Inc., Cellular Infrastructure Group In article , Paul Robinson wrote: > Paul Barnett wrote me in response to my message: >> Paul Robinson said: >>> I'm going to raise an issue here because I think it relates to the >>> issue of why nothing beyond lip service seems to be done by carriers >>> about cellular fraud. >> I think you made some good points about the impact of cellular fraud, >> but I think you missed an important one (I didn't read real carefully, >> so the omission may be mine): >> Unlike software piracy, cellular bandwidth is a limited commodity. >> Every fraudulent call has the opportunity to block a legitimate call >> that would have resulted in some additional revenue. > I did make that point in part. Additionally, and if a particular > system is saturated, then some additional fraudulent unpaid traffic > might cause legitimate, paid traffic to not get through. >> Furthermore, there is the capital investment required to build and >> maintain the facilities to provide the additional increment of bandwidth >> used by fraudulent calls, in order to provide a satisfactory level of >> service to the legitimate subscribers. > Yes, but again, how much of the claimed losses are real chargebacks > and out of pocket costs, and how much of it is illusory lost profits > (some of which might never have occurred). > If someone who can't afford cellular service places fraudulent calls, > certainly the cellular company loses revenue and perhaps has out of > pocket costs, but those calls would never have been made, so the company > would never have received the revenue from it. Plain and simple ... ethically, there is NO difference between cellular fraud and calling card fraud. Both of them require the carrier to purchase additional equipment or potentially deny service to a paying customer. The carrier can't always eat the costs. EVERYBODY pays for cellular fraud. > About the only place where lost revenue might be a valid issue is for > people who use fraudulent time, not because they can't afford to use the > service, but because they cannot afford to have a particular call tracked > to a phone issued in their name, again typically because they are involved > in the manufacture and sale of unauthorized dried plant residues, and > referred to by police and prosecutors as drug dealers. > This was the point I probably should have made: that if the cellular > companies were actually getting hit for $1 million a day in settlements, > I find it likely that they would have pushed for encryption a long time > ago. What the $1 million figure probably represents is imaginary lost > profits from unbilled fraud, which is a whole different matter > altogether. It means that their overall profit margin is less, it does > not mean they are actually *out* any money. Businesses exist solely for the purpose of making a profit. BTW: the new digital systems (CDMA/TDMA, etc) will have much more robust authentication and encryption algorithms. This will be another reason to move to digital. > And this may be the reason cellular companies have essentially either > made customers eat most of the fraud, or barely done anything beyond lip > service to stop it. I wouldn't say they've done nothing. There exist many methods to combat fraud, but they cost money! Since they'll end up migrating to digital, which will probably fix the problem, why spend now?? Dan DeClerck EMAIL: declrckd@cig.mot.com Motorola Cellular APD Phone: (708) 632-4596 ------------------------------ From: cajones@Gateway.Uswnvg.COM (Carl Jones) Subject: Corporate Creativity, was Re: Cellular Fraud: How Much is Real? Date: 26 Jan 1995 00:59:51 GMT Organization: U S WEST NewVector Group, Inc. > Or even better ... These calls "would have been" at the Roaming Rate > of $5/minute. Wow!. Ok, let's get something straight. If a cloner takes a number from Seattle and uses it in New York to make fraudulent calls, the Seattle company has to pay hard cash to the New York company because those calls were put through using a MIN/ESN combination that belonged to the Seattle company. That money must be paid even though the calls were fraudulent. That is where the big losses occur. It's not cooking the books, it's not tax evasion. It's a hard cash loss! End of story ... I speak for everyone in a twenty mile radius around me :) Any questions..E-Mail cajones@uswnvg.com................... ------------------------------ From: lincmad@netcom.com (Linc Madison) Subject: Re: Five Digit Phone Numbers Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Thu, 26 Jan 1995 00:43:08 GMT My mother is from the small town of Goliad, Texas, about half way between San Antonio and Corpus Christi (in the Corpus LATA). Until very recently, all local numbers were dialed as just five digits. Until about ten years ago, all local numbers were 5-3xxx, but they are now up to 5-2xxx and even 5-8xxx numbers. However, as of a few months ago, you now must actually dial the entire seven-digit number for local calls! (All long-distance calls are eleven digits.) They finally got touch-tone some time in the late 1980's. The reason for the change, however, is that the local calling area is being expanded slightly, to cover points as far as 30 miles away. It will now be a local call to phone Fannin, Charco, Weesatche (all 30 or so subscribers), and Victoria (a town of 50,000 or more with an airport and two TV stations). For you history buffs, Goliad is the oft-forgotten second piece of the battle cry: "Remember the Alamo, remember Goliad!" Linc Madison * Oakland, California * LincMad@Netcom.com ------------------------------ From: djcl@io.org (woody) Subject: Re: Freephone Forum vs. ITU Question Date: 25 Jan 1995 22:19:20 -0500 Organization: Internex Online (io.org) Data: 416-363-4151 Voice: 416-363-8676 In article , Judith Oppenheimer wrote: > Because the International Freephone numbers, and domestic freephone > numbers, will *co-exist* in the U.S., the U.S. Users Group has valid > concerns that there will be confusion among U.S. consumers. With regards to International Freephone service, it would seem that a country code *other* than +800 should be used, due to the possible confusion this would create with the domestic toll-free services, most of which use an "800" code already. One potential problem is that someone intending to call a domestic 800 number might try to use the international format instead -- a company called as a wrong number might have to pay the international charges. How much of the international freephone system has been decided so far? djcl@io.org ------------------------------ From: SHERI Subject: Re: Northern TeleCom Norstar Key System Date: Wed, 25 Jan 95 17:12:26 -0500 Organization: Delphi (info@delphi.com email, 800-695-4005 voice) Daniel Aharonoff writes: > Would like to get some feedback on reliability, expandability, stability > on a Norstar switch by Northern Telecom. We are also looking to get a > voice-mail that would compliment that system. I'm a certified installer of Norstar switches. I've been installing them for two years. I would like to say that they are the best systems I've installed so far. I've never heard any complaints from any customers. All had good things to say about the systems. They are also very flexible when it comes to expanding. Northern Telecom makes a voice mail systems that goes side by side with the Norstar systems. It's called Star Talk. There are different size voice mail systems. Norstar systems are also compatibile with other voice mail systems. ------------------------------ From: tmatimar@isgtec.com (Ted Timar) Date: Wed, 25 Jan 1995 11:12:00 -0500 Organization: ISG Technologies Inc. Subject: Re: Internet Mail With Half the Address? In Volume 15, Issue 53, Message 9, Jane McMahon wrote, > Pat, > How do find someone using Internet? > [TELECOM Digest Editor's Note: Perhaps it is about time for someone to > write an article describing the Internet 'white pages' and how to use > them. I think searching those would be a good way for you to start. PAT] Three Usenet FAQs of use exist, in Comp.Mail.Misc, "Updated Inter-Network Mail Guide" also in Comp.Mail.Misc, "FAQ: How to find people's E-mail addresses" and in Soc.Net-People, "FAQ: College Email Addresses" These in turn are archived at rtfm.mit.edu as (in order), pub/usenet/news.answers/mail/inter-network-guide pub/usenet/news.answers/finding-addresses pub/usenet/news.answers/mail/college-email/part[123] The last of these (College email addresses) is close to a year out of date, so any volunteers to take it over would probably be extremely welcome. Ted Timar tmatimar@isgtec.com ------------------------------ From: droelke@rockdal.aud.alcatel.com (Daniel R. Oelke) Subject: Re: Help Needed With Displaying X Windows Date: 25 Jan 1995 18:19:12 GMT Organization: Alcatel Network Systems Inc. Reply-To: droelke@rockdal.aud.alcatel.com In article 9@eecs.nwu.edu, mike@premisys.com (Mike MacFaden) writes: > In article , Ken Stack edu> wrote: >> I am trying to fins a way to display x windows on my PC from my Sun at >> work. The problem is that my Sun at work does not have slip or ppp >> for security reasons. I have attempted to use PSI's interramp service > 1) You need a SLIP or PPP link from home. If your workstation doesn't > have it, then I suggest your sysAdm install a Terminal Server which > does provide good security (companies: Livingston, Xylogics, Xyplex) > 2) Get a copy of an X server that implements Low Bandwidth X (LBX) A > good company to talk to is Network Computing Devices (NCD). > 1 - you do not *need* a SLIP or PPP link if all you want to do is display X-windows on your PC. 2 - NCD has a product called X-Remote. It implements LBX over a direct modem connection, and exports your Sun's x-windows into an MS-Windows environment. I love it. For X-windows, this is the best solution (and cheapest) that I know of. If you want to do more on your PC -- then you might need an actual network (i.e. SLIP/PPP) connection. Dan Oelke Alcatel Network Systems droelke@aud.alcatel.com Richardson, TX http://spirit.aud.alcatel.com:8081/~droelke/ ------------------------------ From: jrm@world.std.com (John R MacLeod) Subject: Re: Where to Find tpage? Organization: The World Public Access UNIX, Brookline, MA Date: Wed, 25 Jan 1995 19:19:53 GMT The `tpage' distribution is at lcs.mit.edu, in the directory /telecom-archives/technical. The FAQs and www search engines I tried were utterly useless in finding this stuff, I just happened to notice telecom-archives and went searching. Look for ixo.program.scripts and ixo.tap.protocol (there are also two unrelated files, pager.bin.uqx and pager.ixo.example, for Macintosh). It turns out that the ixocico program at lcs.mit.edu can be made to work with our pager service, "Pagenet". Just recognize the ACK character at the end of the service's message packet, do not require length 1. For example, ixocico should consider "PAGENET MESSAGE CENTER" equivalent to plain ACK. John ------------------------------ From: wes.leatherock@oubbs.telecom.uoknor.edu Date: Wed, 25 Jan 95 15:47:27 Subject: Re: Areas Covered by Phone Book? Quoting Paul Robinson > Benjamin P. Carter , writes: >> A typical phone book with both white and yellow pages has a >> map with a large white area surrounding a smaller yellow area. >> What is this map trying to tell me? > The white area shows the limits of the white pages covered by > that book. In the case of the Los Angeles area, there can -- > and will be -- holes in that area because pieces will be covered > by different telephone companies there. The yellow area is the > maximum area that yellow pages for that area will cover, and > again, may have holes. I believe the Los Angeles area was mentioned in this respect, and if there are holes in the listings because of different telephone companies that is a retrogression. At one time there were 30 or 40 telephone companies in the L.A. area, and they somehow reached agreement (possibly at the prodding of the P.U.C. or local civic leaders) to issue regional books with the listings "interleaved" (all in one alphabetical list). For example, one for Northwestern, one for Central, etc. The independent exchanges were dotted all over the area. There was no indication in the listings as to what telephone company served what customer. The yellow pages were a different story and each company usually issued yellow pages, and sold yellow page advertising, only for their territory. So a book would have complete white pages listings for the area covered, but only yellow pages for the area served by that telephone company. Now, of course, the independent companies have all been absorbed by GTE and the only two players are Pacific Telephone and GTE. But I'd be surprised in the P.U.C. or public pressure would let them go back to issuing directories with "holes" in the area covered. Yellow Pages directories, "locality" directories and private directories, of course, are an entirely different story. Wes Leatherock wes.leatherock@oubbs.telecom.uoknor.edu wes.leatherock@f2001.n147.z1.fidonet.org [TELECOM Digest Editor's Note: Sometimes all the listings will be in one book but in separate parts. For example, I remember seeing a couple of books issued by Bell a few years ago which covered some regional area, however after that part of the book finished, and some other pages were put in the middle (maps, etc) then another set of white pages started, with a notation saying something like 'alphabetical listings for Podunk'. 'Copyright 19xx, Podunk Telephone Company'. So they were in the directory of record for the area (the Bell System directory) but not actually merged with it. Other times, such as with Illinois Bell and Centel, the Centel listings for Chicago only are part of the Illinois Bell Chicago White Pages, with no reference at all to the fact that they are part of a different telco. PAT] ------------------------------ From: ronk@eagle.ais.net (Ron Kritzman) Subject: Re: Radio Station Transmission Lines Date: 25 Jan 1995 15:50:03 GMT Organization: American Information Systems, Inc. Daniel Ritsma (ritsma@yu1.yu.edu) wrote: > I am working for a small radio station that is now using two 8kHz > lines to feed four tansmitters (AM). On one line we feed three > transmitters since they are for buildings next to each other; the other > line is for a building some 150 blocks from here. > Should we stick with analog lines or slowly move over to other types > of communication by phone? The fact that we have to branch off led me > to believe that we should go for digital transmition, so that we would > have less noise and a better signal. This sounds like the typical "carrier current" scenario. We had the same sort of setup when I was in college. Since the 8 kHz line well exceeds the bandwidth you can cram thru an AM radio, the two remaining questions are noise and cost. For your "close" string feeding the four buildings -- is there enough noise on the line to be objectionable? How about the 150 block run? Your "yu" login tells me you're in NYC, which means twenty blocks to the mile. Thats about seven miles then, give or take the zigzagging to and from the telco COs. Presuming that the noise and bandwidth are acceptable on both lines, look at cost. What will NYNEX hit you with for a digital line? One more thought, especially if you want to save money. Does the school have some sort of dedicated carrier already connecting the locations? A T-1 maybe? And can the Telecomm or MIS dept or whomever runs it, spare you a bit of bandwidth? [TELECOM Digest Editor's Note: New York City has twenty blocks to the mile? Gee whiz ... they must be very small blocks. In Chicago we have eight blocks to the mile with the exception of one area just south of downtown where there exist twelve blocks to the mile, and that's only for about one mile. On first reading the above, I thought there was a distance of 15-18 miles involved. PAT] ------------------------------ From: c23st@kocrsv01.delcoelect.com (Spiros Triantafyllopoulos) Subject: Re: GSM Cellular Operators List Date: 25 Jan 1995 15:13:26 GMT Organization: Delco Electronics Corp. In article , Lim Kong Hong wrote: > In Singapore, GSM subscribers have the option to subscribe to autoroaming > services to Hongkong, UK, Australia, Switzerland and Denmark. This means > that with their GSM SIM Card, they are able to send/receive call in the > above countries. Could someone provide a brief explanation of GSM? A friend of mine in Greece got a car phone with GSM and he was talking about the SIM card and of course I had no clue as to what he's talking about. Thanks, Spiros Triantafyllopoulos Kokomo, IN 46904 (317) 451-0815 Software Development Tools, AD/SI c23st@kocrsv01.delcoelect.com Delco Electronics/GM Hughes Electronics "Reading, 'Rithmetic, and Readnews" ------------------------------ From: Victor Hu Subject: 28.8k bps Modem Date: Wed, 25 Jan 95 19:43:02 PST Hello, I just purchased a 28.8 K modem with the brand "Supra". I paid extra to get the 28.8 K instead of the 14.4 K. Can someone help me with the following? 1. Is the bps across the twisted pair wire actually running at 28.8 or 14.4 when 28.8 is invoked? Or is it just data compression? 2. What kinds of host supports 28.8K? I only connect up to my university's computer which only runs at 9.6K max. 3. What is the speed of fax machines? My impression of my new modem: 1. The Supra has a nice display (external version for the PC) that shows the mode of transmission. 2. However, I found that it required a different initialization string than that suggested as default for modems that are Hayes compatible. Thanks very much, Victor ------------------------------ From: rdp@palmer.com (Richard Palmer) Subject: What is an STD Coupler? Date: Wed, 25 Jan 1995 17:05:56 GMT Organization: RD & MA Palmer MD PMC My local telco (South Central Bell) has been charging me $18 a month for an STP coupler. I am apparently not using this, not in posession of it, and there is some question in my mind if I ever was. Could some kind soul please tell me what this is, and if anyone has any insights as to their responsibility about refunding erroneous charges I would be very interested. The South Central Bell representitive with whom I spoke told me that the "statute of limitations" was six months. Richard Palmer richard.palmer@palmer.com (504) 888-5315 ------------------------------ From: srothkin@aol.com (S Rothkin) Subject: Re: Voice File Formats Date: 25 Jan 1995 10:20:19 -0500 Organization: America Online, Inc. (1-800-827-6364) Reply-To: srothkin@aol.com (S Rothkin) Another reply to your message answered your question for all formats except Vbase. If by Vbase you mean the indexed file used by VFEdit, The file starts with a header record which can be read with the following C structure (note that TD_BYTE4 should be defined to whatever will evaluate to four bytes on your platform): struct t_VFE_xfile_hdr { unsigned TD_BYTE4 IdxTot; /* total indices allocated in the file (including gaps) */ unsigned TD_BYTE4 SmpFrq; /* Sample frenquency */ unsigned TD_BYTE4 IdxUse; /* total indice used by phrases */ unsigned TD_BYTE4 dummya; /* dummy */ unsigned TD_BYTE4 BytUse; /* total bytes used */ unsigned TD_BYTE4 dummyb; /* dummy */ }; Following the header is an array of IdxTot entries of the following structure. Entries are in order of phrase number. If you have gaps in phrase numbers, there will be some entries with length 0. struct t_VFE_xfile_index { unsigned TD_BYTE4 offset; /* absolute offset in file */ unsigned TD_BYTE4 length; /* length of the index */ unsigned TD_BYTE4 Txtoff; /* annotation text offset in file */ }; The rest of the file is the phrase data, and the annotation text entered through VFEdit (if any). The offset and length fields of the index entries control access to the phrase data and annotation text. Steve Rothkin Senior Systems Consultant, Granada Systems Design Email: SRothkin@aol.com Work: (914) 221-1617 ext. 217 Fax: (914) 226-5779 Home: (914) 298-1242 ------------------------------ From: moshtr@rockdal.aud.alcatel.com (Ramin ) Subject: Re: Telephony Card/Software Needed Date: 25 Jan 1995 16:13:48 GMT Organization: Alcatel Network Systems Inc. Reply-To: moshtr@rockdal.aud.alcatel.com Paul Garfield (garfield@vanilla.cs.umn.edu) wrote: > I've seen a couple similar questions posted but haven't seen an > answer. Please post the answer. I'm looking for cards for IBM PCs > that can handle phone calls. I need to be able to program how the > call is handled (when and what to play and record, what to do with > touch tone presses, etc). All I've seen is things for one line. I > want to start with about four lines but have the ability to upgrade to > perhaps 24, so I need multiple (four or eight) lines per card. What > are good vendors for this and where can I go for information? Thanks. Try Dialogics at 1-800-755-4444. If you need some help with the software drop me a line. Ramin ------------------------------ End of TELECOM Digest V15 #65 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa24059; 31 Jan 95 20:35 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA10842; Tue, 31 Jan 95 14:57:17 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA10834; Tue, 31 Jan 95 14:57:15 CST Date: Tue, 31 Jan 95 14:57:15 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501312057.AA10834@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #66 TELECOM Digest Tue, 31 Jan 95 14:57:00 CST Volume 15 : Issue 66 Inside This Issue: Editor: Patrick A. Townson No Activity in This Newsgroup? (Glenn Foote) GSM Operators - List (Robert Lindh) When Will PBXs Go Away? (Brent Laminack) Infrared Network Devices (Tim Lee) Sprint For IntraLATA Calls in California (Javier Henderson) Anyone Know High Speed Serial Interface (Chuc Do) Ten Digit Dialing (Evan Champion) Cheap Way to Get an 800 Number? (David Hayes) Data Engineer Position in Houston (pp002963@interramp.com) Directory Assistance in Tokyo (Javier Henderson) CCITT Class A (Jesus Ruelas) Is There a Newsgroup For SONET? (Geno Rice) The Four Minute Battle For 800-555 (Dave Leibold) Bell Canada Multi-Language Operator Support Trial (Dave Leibold) IVR Software Information Wanted (Robert Geradts) DAX Software - RAM Research (Barton Fisher) Telebit Introduces Two V.34 Modems (Eileen Lin) Consultant Wanted in Denver, Colorado USA (Richard Bourassa) RBOC Aids Motorola's ISDN Push (Chris J. Cartwright) Plumber Arrested: Fraudulent Call Forwarding (Dave Levenson) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: glnfoote@freenet.columbus.oh.us (Glenn Foote) Subject: No Activity in This Newsgroup? Date: 31 Jan 1995 14:28:26 -0500 Organization: The Greater Columbus Freenet I haven't seen any activity in this newsgroup for about a week now. Is it my site, or has our moderator been ill? Glenn L Foote ...... glnfoote@freenet.columbus.oh.us [TELECOM Digest Editor's Note: Our site, nwu.edu was victimized by a hacker last Thursday. Somehow he got in as root and did quite a bit of damage. The entire site was down for a couple days while repairs were made. At that point, by the weekend, the computers were operational again, however our links to the outside world (that is, our dial ups and our telnet, rlogin, ftp, etc) remained shut down until some additional changes were made. Our links to the network and our dialups were turned back on late Monday night. The sysadmin here has complete details on it but I discourage writing or bothering him as there are still some repairs going on and he is quite busy. I am grateful he and his staff made the enormous effort they did in order that things like this Digest could get back in publication as quickly as possible. I think we now have Caller-ID on our dialup lines. Its too bad hackers have to ruin things for everyone else. PAT] ------------------------------ From: etxlndh@eos99.ericsson.se (Robert Lindh) Subject: GSM Operators - List Organization: Ericsson Telecom AB Date: Tue, 31 Jan 1995 19:01:56 GMT Country Operator name Network code Tel to customer service ------ ------------- ------------ ----------------------- Argentina Australia Optus 505 02 Telecom/Telstra 505 01 Int + 6 118 018 287 Vodafone 505 03 Int + 612 415 7236 Austria PTV Austria 232 01 Belgium Belgacom 206 01 Int + 32 2205 4000 Cameroon Denmark Sonofon 238 02 Int + 45 9936 7196 Tele Danmark Mobil 238 01 Int + 45 80 20 20 20 Estonia EMT 248 01 Radiolinja Estonia Finland Radiolinja Finland 244 05 Int + 358 800 95050 Telecom 244 91 Int + 358 800 7000 France SFR 208 10 Int + 33 1 44 16 20 16 Telecom 208 01 Int + 33 1 44 62 14 81 Germany D1, DeTeMobil 262 01 Int + 49 511 288 0171 D2, Mannesmann 262 02 Int + 49 172 1212 G Britain Cellnet 234 10 Int + 44 753 504548 Vodafon 234 15 Int + 44 836 1100 Greece Panafon 202 05 Int + 30 944 00 122 STET 202 10 Int + 30 93 333 333 Holland Telekom 204 08 Int + 31 50 688 699 Hong Kong SmarTone 454 06 Int + 852 880 2688 Telecom CSL 454 00 Int + 852 803 8450 Hungary Pannon GSM 216 01 Int + 36 1 270 4120 Westel 900 216 30 Int + 36 30 303 100 Iceland Telekom Int + 354 96 330 Ireland Telecom 272 01 Int + 353 42 31999 Israel Italy SIP 222 01 Int + 39 6615 20309 Jersey Jersey Telecoms Lebanon Libancell Lithuania LMT 247 01 Luxemburg Telekom 270 01 Int + 352 4088 7088 Macao New Zealand Bell South 530 01 Norway NetCom 242 02 Int + 47 92 00 01 68 Telenor Mobil 242 01 Int + 47 22 03 03 01 Portugal Telecel 268 01 Int + 351 931 1212 TMN 268 06 Int + 351 1 793 91 78 Singapore Singapore Telecom 525 01 South Africa MTN 655 10 Vodacom 655 01 Int + 27 82 111 Spain Telefonica Spain 214 07 Sweden Comviq 240 07 Int + 46 200 22 20 40 Europolitan 240 08 Int + 46 20 22 22 22 Telia 240 01 Int + 46 771 91 03 50 Switzerland Telekom 228 01 Int + 41 46 05 64 64 Thailand AIS GSM Turkey TEKnoTEL 286 02 Turkcell 286 01 Int + 90 800 211 0211 UAE ETISALAT 424 01 Uganda [TELECOM Digest Editor's Note: The information for the last entry on the list, Uganda, was missing when this arrived here. PAT] ------------------------------ From: brent@cc.gatech.edu (Brent Laminack) Subject: When Will PBXs Go Away? Date: 31 Jan 1995 10:17:45 -0500 Organization: Georgia Institute of Technology What is the current thinking on when a PC (powerPC, whatever) replace the PBX? i.e. when can I run my T1 from the telco with my voice trunks on it into one card on a PC and have it route voice over the LAN to other desktop computers that double as phones? It will probably be a time curve: first available for small offices (ten users) on an ethernet, then a while later available for 200 lines on a faster LAN, etc. What says the net? My Mitel sx200 lite has a 68000 for a processor: it's a MacPlus! Surely the cpu horsepower is available to replace lots of dedicated TTL and switching hardware. I was just at a briefing from Apple and they're working with the PBX makers for a Geoport Mac to be a voice terminal behind a "big maker" PBX. But who are the startups that are out to kill the PBX makers? Brent Laminack (brent@cc.gatech.edu) ------------------------------ From: tslee@csupomona.edu (Tim_Lee) Subject: Infrared Network Devices Date: 31 Jan 95 10:39:45 PST Organization: California State Polytechnic University, Pomona Those of you who have some experience working with Infrared Network Devices (for LANs): What are some of the more reliable equipments you have used or you know of? Will you also inform me on their basic specs? ------------------------------ From: henderson@mln.com Date: Tue, 31 Jan 1995 11:20:58 PDT Subject: Sprint For IntraLATA Calls in California Organization: Medical Laboratory Network; Ventura, CA We had a discussion about the Sprint offer of one cent per minute for customers in California using them to carry their intraLATA calls. One of the caveats mentioned here was that customers on any of their 'saving' plans (say, The Most) would not be eligible for the special rate. I am with The Most plan, and today I got my bill. There are several intraLATA calls, all billed at one cent per minute. This confirms what I was told on the phone by Sprint customer service: the rate is good for all of the residential customers (the person didn't specify any geographical restrictions, i.e., Northern versus Southern. I'm in SoCal [Ventura, to be precise]). Javier Henderson (JH21) henderson@mln.com ------------------------------ Date: Tue, 31 Jan 1995 13:27:26 +0000 From: bcarh8ab!bcars703!chucdo@uunet.uu.net Subject: Anyone Know High Speed Serial Interface? Organization: Bell-Northern Research, Ottawa, Canada I'm looking for any available information on commercially available products that support HSSI (1M-52Mbit/s). Please, feel free to post information or send it to me via e-mail. In returns, if there is enough interest, I will post a summary of what I get in e-mail. Thanks in advance. Chuc Do chucdo@bnr.ca ------------------------------ Date: Tue, 31 Jan 1995 08:55:08 +0000 From: evan champion Subject: Ten Digit Dialing Organization: Bell Northern Research Recently there has been a lot of talk about having to do ten digit dialing to call even local numbers that are in a different phone number. I have a number of users who are going to be affected by the above and am looking for a good explanation for them. I'm myself am not completely sure myself of all the reasons for making the changes to out-of-area dialing and would like to get it right the first time :-) Could someone e-mail me with an explanation? Thanks! Evan [TELECOM Digest Editor's Note: Actually, it is eleven digit dialing, not ten digit if you count the '1' on the front. However, one would think that when this becomes universal all over the USA that we could in fact get by with ten digits since the '1' would no longer be needed; there would be no 'local' calls to distinquish from 'long distance'. Since everything that we dial would consist of area code plus seven digits, there would be no need for a '1' to indicate that 'what follows is an area code' -- everything that follows would be area codes! It would be nice to see the '1' vanish under those cirucmstances. Or maybe they will insist on keeping it using as their rationale that '1' is also -- by coincidence -- the country code for the USA and Canada, and that what we are really dialing is country code, area code and seven digit number. As to *why* they are imposing it on calls within the same area -- as is supposed to be the case in Chicago beginning sometime in 1996 -- I do not know. Various reasons have been given. PAT] ------------------------------ From: dhayes@onramp.net (David Hayes) Subject: Cheap Way to Get an 800 Number? Date: 31 Jan 1995 17:54:01 GMT Organization: On-Ramp; Individual Internet Connections Some friends and I are starting a new small business. We would like to have an 800 number. How do I get one? Other than ATT/MCI/Sprint, are there other people who can provide an 800 number cheaply? How do I minimize my cost? How do I get 800-CALL-MY-BUSINESS? Do I have have to pay extra for a "good" 800 number. David Hayes PGP public key available on request, or send dhayes@onramp.net mail subject: help to pgp-public-keys@demon.co.uk ------------------------------ From: pp002963@interramp.com Subject: Data Engineer Position in Houston Date: Tue, 31 Jan 95 19:42:40 PDT Organization: PSI Public Usenet Link Responsibilities include supporting regional and national customer CDPD applications, coordination with marketing, network engineering, MIS and systems vendors. Eight years experience in software/networking/data comm- unications (or four years with BSEE/CS) REQUIRED. Experience in TCP/IP and Software Testing needed; Documentation and presentation skills, knowledge of cellular industry and technology are a plus. Payment for relocation to Houston will be considered. Immediate availability. PLEASE DO NOT RESPOND TO ME BY E-MAIL AS I DO NOT LOG IN EVERY DAY; FAX RESUMES TO 713-876-5011. Thanks. ------------------------------ Subject: Directory Assistance in Tokyo From: henderson@mln.com (Javier Henderson) Date: 31 Jan 95 08:30:58 PST Organization: Medical Laboratory Network; Ventura, CA Hello, I need help with directory assistance in Tokyo, Japan. I tried AT&T, which I guess connected me with DA in Tokyo, but I may not have the correct spelling for the business I'm looking for, so the search was a bust. It's a hotel, and I was told it spells Abiko. Any help will be much appreciated. Javier Henderson (JH21) henderson@mln.com ------------------------------ From: rgu332@email.sps.mot.com (Jesus Ruelas) Subject: CCITT Class A Organization: Motorola GDL - IS Department Date: Tue, 31 Jan 1995 02:34:21 GMT Hi everybody, I read about the committee CCITT that is formed by 5 class groups, they are class A, class B, ..., class E; and know that only the group class A has the voting right while proposing a Standard specification. Does anybody know why only this group has this kind of privileges?. Thanks and regards, Jesus Ruelas Telecommunications & WAN Motorola, Inc. ------------------------------ From: geno@paladin.ho.att.com (-E.RICE) Subject: Newsgroup For SONET? Organization: AT&T Date: Tue, 31 Jan 1995 19:37:37 GMT What newsgroup contains discussions of SONET? Geno Rice [TELECOM Digest Editor's Note: You will find them here from time to time. Does anyone know of a group specifically on the topic? PAT] ------------------------------ Date: Tue, 31 Jan 95 00:14 EST From: dleibold@gvc.com (Dave Leibold) Subject: The Four Minute Battle For 800-555 [from Bell News, 23 Jan 95 - content is Bell Canada's] [from photo caption...] I've got one ... The event began at 9 a.m. and by 9:04 a.m., it was over. On December 15, a new NXX (555) was opened for 1-800 numbers across North America allowing for approximately 8,000 new numbers. We were competing against all the other telephone companies in North America to get as many of them as we could. Doris Tesolin, an 800 Service Centre associate, celebrates getting the first number just after the 9 a.m. start. At exactly 9:04 a.m., the entire 8,000 numbers were gone and the 800 Service Centre was successful in securing about 40 numbers for our customers. [dl note: apart from 555.1212 and perhaps 555.4141, and with a capacity of 10 000 possible 800 555.xxxx numbers, what happened to most of the other 2000 numbers available in 800-555?] ------------------------------ Date: Tue, 31 Jan 95 00:17 EST From: dleibold@gvc.com (Dave Leibold) Subject: Bell Canada Multi-Language Operator Support Trial [from Bell News, 9 Jan 95, content is Bell Canada's] Our LD assistance comes in 17 languages. Our customers can now receive assistance in making long distance calls in the language of their choice. In a six-month trial which began last December, our operators are offering 24-hour access to Language Assistance, at no extra charge, to assist customers in completing their long distance calls. This month and next, customers will receive information on dialing "0" for language assistance via a SIM (Short Informational Message) on their monthly bill. "It's another example of how we continue to find new services to delight our customers," says Janet Garrod, of Consumer Market Management. The trial will measure customer response and demand for the free service, assess the cost and benefits of providing such a service, and identify the most frequently used languages. ------------- [sidebar] Our ethnic customers can receive assistance in the following 17 languages: Mandarin; Cantonese; Japanese; Vietnamese; Korean; Hebrew; German; Spanish; Polish; Russian; Portuguese; Romanian; Tagalog; Italian; Hindi; Arabic; and French. ------------------------------ From: css@pacifier.com (Robert Geradts) Subject: IVR Software Information Wanted Date: 31 Jan 1995 06:36:54 GMT Organization: Pacifier Internet Server (206) 693-0325 I have been attempting to evaluate many different Interactive Voice Recognition development platforms. Can anyone out there share their views on the following products? Visual Voice by Stylus Innovation ProVIDE by Telephone Response Technologies REKOLL by N-Soft Ring! Application Generator by Ring! 4Voice and Narrator by C3 Voice Applications Language by U.S.Telecom CallPath DirectTalk/2 by IBM Any help is greatly appreciated! Thanks, Rob ------------------------------ From: bartonfisher@delphi.com Subject: DAX Software - RAM Research Date: Tue, 31 Jan 95 01:20:54 -0500 Organization: Delphi (info@delphi.com email, 800-695-4005 voice) I'm interested in finding people that own the DAX voice/fax developement software. Please Email me. Thanks, Bart ------------------------------ From: eileen@telebit.com (Eileen Lin) Subject: Telebit Introduces Two V.34 Modems Organization: Telebit Corporation; Sunnyvale, CA, USA Date: Tue, 31 Jan 1995 15:43:35 GMT Contact: Direct Marketing Dept., Telebit Corp. Tel: 408/734-4333 or 800/835-3248 Fax: 408/734-3333 Internet: sales@telebit.com TELEBIT INTRODUCES TWO V.34 MODEMS SUNNYVALE, Calif., Jan. 16, 1995 -- Telebit Corporation, a leader in the on-demand remote access industry, today announced that its FastBlazer 8840 modems now support the ITU-T V.34 standard. The FastBlazer(R) 8840 is designed for environments where large central site modem requirements include reliability, comprehensive network management, high speed and global homologation. In addition, today the company introduced the TeleBlazer, a V.34 modem designed for remote users dialing into LANs who want to take advantage of increased speeds. Product Features: Features of the FastBlazer 8840 include: - Speeds of up to 28.8 Kbps uncompressed and up to 115.2 Kbps with compression - Support for V.34, V.32terbo and eight other ITU-T and Bell standards - Flash memory for simple upgrades - Simple on-site configuration, control and monitoring via an 18-button front panel keypad and LCD display - Extensive command set and configuration parameters - Automatic single-call dial restoral of leased lines - Full configuration, control, testing and monitoring of FastBlazer rackmount modems via Telebit's ViewBlazer (R) network management system - Full compatibility with Telebit's NetBlazer(R) family of dial-up routers - Available in standalone and rackmount versions - Conformity to worldwide regulatory requirements - Extensive global homologation plans TeleBlazer features include: - Speeds of up to 28.8 Kbps uncompressed and up to 115.2 Kbps with compression - Support for V.34, V.FC and eight other ITU-T and Bell standards - Support for 14.4 Kbps fax transmissions - V.42bis and MNP 5 data compression - Full compatibility with Telebit's NetBlazer(R) family of on-demand routers - MNP 10 with `Adverse Channel Enhancement' for reliable cellular communications Price and availability: The FastBlazer 8840 Standalone and FastBlazer 8840 Rackmount are available at the end of January 1995 and have a list price of $1,199 (U.S.). Telebit's TeleBlazer is also available at the end of January 1995 and has a list price of $399 (U.S.). V.34 support can be added to the FastBlazer through a free software upgrade that is available through Telebit's Customer Service bulletin board. The telephone number for the Chelmsford, MA bulletin board is 508-656-9103; to contact the Sunnyvale, CA bulletin board, phone 408-745-3707 or 408-745-3861. Telebit Corporation designs, manufactures and markets a family of remote network access products to enable cost-effective extension of LANs to remote users. The company has offices in the United States and Europe and markets its products and services worldwide through value-added resellers, wholesale distributors and OEMs. Telebit is traded on the Nasdaq exchange under the symbol TBIT. Telebit, FastBlazer, ViewBlazer and NetBlazer are registered trademarks of Telebit Corporation. ------------------------------ From: bourassa@teal.csn.org (Richard Bourassa) Subject: Consultant Wanted in Denver, Colorado USA Date: 31 Jan 1995 15:51:18 GMT Organization: Colorado SuperNet, Inc. World-wide manufacturing company is looking for a consultant with expertise in tariff analysis and telephony cost management. Major locations exist in Denver & Miami (USA), France and Australia. Objective is to analyze existing facilities and service contracts and make recommendations to reduce global communications costs for voice, fax, video and data. Familiarity with tariff 12 issues required. Interested parties contact: Ben Pepper Senior Director World-Wide Information Systems (303) 799-2230 (US Phone Number) benp@tps.com (Internet) -or- Richard Bourassa Systems Analyst World-wide Information Systems (303) 799-2413 (US Phone Number) richb@tps.com (Internet) Feel free to submit credentials and contact information via email. Richard Bourassa, Information Systems ___T_e_l_e_c_t_r_o_n_i_c_s__|/\ __ Telectronics Pacing Systems Pacing Systems \/ 7400 S. Tucson Way, Englewood, CO 80112 ph (303)799-2413 fax (303)799-1241 Internet: richb@tps.com ------------------------------ Date: Tue, 31 Jan 1995 11:14:34 EST From: Chris J. Cartwright Subject: RBOC Aids Motorola's ISDN Push In the 1/23/95 issue of {PC Week}, page 55, there is an article that describes a joint effort between Motorola and Ameritech to bundle ISDN hardware and services for home and office use. ISDN BRI starts at $28/mo and the RBOC will sell Motorla's terminal adapter for $399 or $19/mo for two years. Ameritech also provides it's own software for the ISDN and has a similar program using two T-1's. This is not an ad, I work for neither, just want ISDN at home at a price I can afford and expect others do too. Chris Cartwright, Technical Engineer Voice 301.295.0809 Mail dsc3cjc@imc220.med.navy.mil C-serve 71614,2441 ------------------------------ From: dave@westmark.com (Dave Levenson) Subject: Plumber Arrested: Fraudulent Call Forwarding Organization: Westmark, Inc. Date: Tue, 31 Jan 1995 01:43:14 GMT A story in the Monday {New York Times} describes a Philadelphia area plumber who subscribed to Call Forwarding Ultra. This is a service offered by Bell Atlantic which allows subscribers to control call-forwarding from a telephone other than the one being forwarded. This plumber allegedly subscribed to the service for several of his competitors without their permission, and then forwarded their calls to his telephone. He then intercepted some or all of their business. He was found out after approximately one month, when one of his victims was complimented by a customer for a job well-done -- a job the victim never did! The perpetrator is currently in jail pending trial for an un-related charge of battery, but is now being charged with numerous counts of wire fraud, theft of business, operating a business under a false identity, and similar charges. Dave Levenson Internet: dave@westmark.com Westmark, Inc. UUCP: uunet!westmark!dave Stirling, NJ, USA Voice: 908 647 0900 Fax: 908 647 6857 [TELECOM Digest Editor's Note: This same report appeared in alt.dcom.telecom today submitted to that newsgroup by Jack Decker who concluded by saying this was a good reason telcos should password accounts, presumably to prevent fraudulent Call Forwarding among other things. The thing he neglected to mention -- nor was it mentioned by Dave Levenson here -- was that Call Forwarding Ultra (or Enhanced Call Forwarding or Remote Call Forwarding as it is known in other telcos) *does* require a password. If you have Call Forwarding on your line otherwise -- you have to already have it installed -- then if you further subscribe to 'Ultra' you are given a personal password or PIN. You dial a seven digit number which is the switch itself, begin by identifying yourself with your PIN, then give the number you wish to have (un)forwarded, followed by the number (if turning it on). The change takes effect immediatly. Needless to say, the switch keeps its own records on who called it from what remote location, with none of this 'private entry' stuff permitted. Typically, that number at the switch will not even answer or respond if the switch cannot tell what number is being used to call it before it answers. Also, no other custom calling features can be changed in any way, nor can any of the many other features of the switch be programmed using that PIN. So telco does make reasonable precautions to insure that one person cannot just call up and change the forwarding for someone else. What goes around comes around: Does anyone remember the old anecdote about the original development of automatic switching involving Alvin Stroger? Mr. Stroger was an undertaker a hundred years ago; he believed that the operators on the manual exchange serving his community had been bribed to divert calls from the public seeking funeral/burial services to his compe- tition. So the story goes, he developed the switch which came to bear his name as a way to be certain that manual operators at telephone exchanges could not wilfully give away his business to his competitors. PAT] ------------------------------ End of TELECOM Digest V15 #66 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa27089; 31 Jan 95 20:57 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA13300; Tue, 31 Jan 95 15:55:43 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA13287; Tue, 31 Jan 95 15:55:33 CST Date: Tue, 31 Jan 95 15:55:33 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9501312155.AA13287@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #67 TELECOM Digest Tue, 31 Jan 95 15:55:30 CST Volume 15 : Issue 67 Inside This Issue: Editor: Patrick A. Townson Book Review: "The Mosaic Navigator" by Gilster (Rob Slade) WilTel's New Telecom Atlas (Leslie Smith) ACC Reports Increase in Billable Minutes (Dave Leibold) Canada and Chile Sign Telecom Research Agreement (Nigel Allen) NACN Problems With Cell One/Utah (Brianhead) (Doug Reuben) Needed: Network Solutions Manager (Lambert Schuyler Jr.) Bell Atlantic ISDN, Part II (Hersh Jeff) More on Universal International Freephone Numbers (Judith Oppenheimer) Gigabit Networking Workshop GBN'95 - Call for Participation (J. Sterbenz) Does AT&T 7506 TAD 03A Pass CID to RS232 of Orignating Caller? (ulmo@panix) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Tue, 31 Jan 1995 14:54:30 EST From: Rob Slade Subject: Book Review: "The Mosaic Navigator" by Gilster BKMOSNAV.RVW 941201 "The Mosaic Navigator", Gilster, 1995, 0-471-11336-0, U$16.95 %A Paul Gilster gilster@interpath.net %C 5353 Dundas Street West, 4th Floor, Etobicoke, ON M9B 6H8 %D 1995 %G 0-471-11336-0 %I John Wiley & Sons, Inc. %O U$16.95 416-236-4433 fax: 416-236-4448 %P 243 %T "The Mosaic Navigator" HTTP (HyperText Transfer Protocol) is the standard for the construction and use of documents which link to other items on the net through the use of URLs (Universal Resource Locators). The World Wide Web is the term which refers to the interconnected set of documents which use HTTP. (World Wide Web is often abbreviated to WWW, W3, or just Web, although this latter causes confusion with a social issues information network by the same name.) Mosaic is an HTTP or W3 client program, often referred to as a "browser". In addition, the Mosaic browser has a graphical interface, and can utilize "viewer" software to display graphics, sound, and video in conjunction with HTTP "pages". There are other browsers, some, like WWW and lynx, text-based. Other graphical clients include Netscape, now being built by one of the original Mosaic developers, and a proprietary part of the new "Warp" version of OS/2. Mosaic, itself, exists in multiple freeware, shareware, and commercial versions, and can be obtained for MS-Windows, the Macintosh, and X. For those who have access to the Internet, but do not yet have Mosaic or the necessary SLIP or PPP access, this book is an excellent guide to getting set up. Chapters three and four give quite detailed instructions for obtaining, installing, and configuring the program. This includes an explanation of the MOSAIC.INI file for Windows. Other resources include Mosaic and W3-related newsgroups and mailing lists. Chapter six is also a solid guide to the use of Mosaic to access ftp, telnet, Gopher, and Usenet news resources. Gilster's "The Internet Navigator" (cf. BKINTNAV.RVW) and "Finding It On the Internet" (cf. BKFNDINT.RVW) are both excellent works, and the weaknesses of this one are shortcomings only in light of that comparison. The explanations of the World Wide Web, HTTP, and Mosaic, while good, are not up to the previous standard. The directions are not quite as lucid, and sometimes seem to assume more knowledge on the part of the reader. Coverage of the actual operation of Mosaic could be stronger: figures would have benefitted from the use of pointers to items being selected, and the discussion of Mosaic menu items is better in the O'Reilly & Associates' Mosaic handbooks (cf. BKMOSAHX.RVW). Also, while Gilster does discuss the fact that the capabilities of HTTP, W3, and Mosaic may be misused for trivialities, that point is not made strongly enough. He mentions the frustration involved with trying to use Mosaic with a slow modem, but not the growing impact of massive graphic, video, and sound file transfers on the bandwidth of the net as a whole. copyright Robert M. Slade, 1994 BKMOSNAV.RVW 941201. Permission given to distribute in TELECOM Digest and associated publications. Vancouver ROBERTS@decus.ca Institute for Robert_Slade@sfu.ca Research into rslade@cue.bc.ca User p1@CyberStore.ca Security Canada V7K 2G6 ------------------------------ Date: Mon, 30 Jan 95 12:08:10 CST From: leslie_smith@wiltel.com Subject: WilTel's New Telecom Atlas Dear Telecom Digest, WilTel is excited to announce our New Telecom Atlas. We would love to know what you and your readers think about this new service that WilTel now provides. My name is Leslie Smith and if you would like to talk with me about our New Telecom Atlas, I can be reached at 918-588-3645, or at Leslie_Smith@wiltel.com. Thank you very much, Leslie Smith Your Ticket to the "World" Have you ever wondered where in the World you could find International Telecom Information at one location on the Internet? Well, wonder no longer, because WilTel has laid the "World" at your fingertips with our New Telecom Atlas. Whether you need to know about the South of France or South Dakota, WilTel's New Telecom Atlas allows you to maneuver around the "World" with ease. The Telecom Atlas provides sojourners overseas with a clickable map of International Carriers and Telecom Research Centers. If your trip is not as far from home, the Telecom Atlas also provides clickable information on Interexchange Carrier Sites, Regional Bell Operating Companies, Freenets, Research Testbeds, and Value Priced Long Distance Providers to those of us in the U.S. The WilTel Telecom Atlas is part of WilTel's Telecom Library. WilTel is devoted to ensuring that Telecommunication information is readily available and easily comprehendable to the public. If you would like to learn more about Wiltel and our many services, we can be reached at http://www.wiltel.com. ------------------------------ From: dleibold@gvc.com (Dave Leibold) Subject: ACC Reports Increase in Billable Minutes Date: Tue, 31 Jan 1995 00:26:51 -0500 [from a news release via CNW] ACC TELENTERPRISES LTD. BILLABLE MINUTES UP OVER 25% TORONTO, Jan. 24 /CNW/ - ACC Telenterprises Ltd. (`ACC') is pleased to announce that their billable minutes for the fourth quarter 1994 are up more than 25% over the same period last year. Billable minutes were reported at 127,245,250 compared to 101,555,897 billable minutes in the fourth quarter of 1993. Commenting on the strong growth, Mr. Steve Dubnik, President and Chief Executive Officer stated, "This increase in traffic is in line with our expected growth. It is exciting to confirm that our billable minutes are trending as planned." The company's U.S. affiliate, ACC Long Distance Corp., has also reported over 14% growth in billable minutes. Their billable minutes in the fourth quarter were 144,519,771 compared to 126,109,656 billable minutes in the fourth quarter of 1993. It's affiliate, ACC Long Distance UK Ltd., reports billable minutes in the fourth quarter of 1994 were up 215% over the third quarter in 1994. The 11,048,441 minutes in the fourth quarter compares to 3,503,304 billable minutes reported in the previous quarter. The billable minutes were 21,795 in the fourth quarter of 1993. ACC TelEnterprises Ltd., together with its sister companies ACC Long Distance Corp. in the United States and ACC Long Distance UK Ltd. is a multinational provider of enhanced telecommunications services. The Canadian company is headquartered in Toronto and provides worldwide long distance voice and data services to business and residential customers in Ontario, Quebec, Manitoba, Alberts and British Columbia. The company operates in 33 metropolitan centres and currently has an annualized revenue run rate in excess of $100 million. ACC TelEnterprises Ltd. is traded on the Toronto Stock Exchange and the Montreal Stock Exchange under the symbol "ACL". For further information: Barry K. Singer, Vice President, Legal and Regulatory, ACC TelEnterprises Ltd., Etobicoke, Ontario, Tel: (416) 236-3636, Fax: (416) 236-4749. ------------------------------ From: Nigel Allen Subject: Canada and Chile Sign Telecom Research Agreement Date: Tue, 31 Jan 1995 20:19:31 EST Organization: Allen Telecom Policy Consultants, Toronto, Ontario, Canada Here is a press release from Industry Canada, the Industry department of the Canadian federal government. Other Industry Canada press releases are available from the ftp/www/gopher site (debra.dgbt.doc.ca) operated by the department. I don't work for the government. File name:01-26-95.b Internet address: debra.dgbt.doc.ca File path: /pub/isc/Industry.Canada.News.Releases/1995 Date archived: Mon Jan 30 08:58:38 EST 1995 Archive name: Industry Canada, Canadian Federal Government Archived by: tyson@debra.dgbt.doc.ca Originator: Industry Canada CANADA AND CHILE SIGN MEMORANDUM OF AGREEMENT ON COMMUNICATIONS DEVELOPMENT DAVOS, Switzerland, January 26, 1995 -- Industry Minister John Manley today welcomed the signing of an agreement between Industry Canada's Communications Research Centre (CRC) and the Chilean government's Ministry of Transport and Telecommunications to establish a framework for collaboration in telecommunications research and development. The agreement was signed in Santiago, Chile, today by Trade Minister Roy MacLaren during the trade mission led by Prime Minister Jean Chretien. The agreement provides the Chilean Ministry of Transportation and Communications with access to CRC's expertise in communications R&D including spectrum management, remote telecommunications, networks and broadcast technologies. "This agreement underlines the CRC's international reputation for excellence in communications research," said Mr. Manley. "The Centre's increasing participation in such international collaborations helps bring Canadian technology and capabilities to world, and translates into new opportunities for the growth of the telecommunications sector in the National Capital Region and Canada." Under the agreement, CRC will provide technical consulting services on a cost-recovery basis, technology transfer, exchange programs and set up conferences and technical symposia. There is no monetary value attached to the agreement. Any CRC technologies transferred will be subject to separate licensing agreements. For additional information, please contact: Kevin Shackell CRC (613) 998-0138 - forwarded by Nigel Allen, Toronto, Ontario, Canada ndallen@io.org ------------------------------ From: dreuben@interpage.net (Doug Reuben) Subject: NACN Problems with Cell One/Utah (Brianhead) Date: Tue, 31 Jan 1995 07:10:41 EST For the past five days, I've noticed that the system serving Brianhead, Utah (for once I am unsure of the SID! :) ), seems to be unable to deliver any sort of switch recordings. When someone calls my 914-643 number, and my phone rings in Brianhead, and goes unanswered, NOTHING happens! The ringing just stops, and the line remains open, but callers do NOT get any message at all! This is a particular problem as coverage is quite transient, and you can easily find yourself in a dead spot where there is no coverage at all. If you had been registered in the system 20 minutes prior to hitting the dead spot, calls will be sent out to Utah, yet since you are in a dead spot, the switch will not send any ringing tones back to the caller, and all the caller hears is dead air, ad infinitum! If the phone is inactive for more than 20 minutes, it usually resets to the NY switch properly, but the fact that no recording is reported when the phone is registered in Utah and either "off" or in a dead or "no service" area is particularly confusing to callers who already have enough difficulty waiting for the beeps, tones, clicks, and other messages which they frequently must endure to reach my phone while roaming. (Although NACN roaming is by far more seamless than most B-side systems ... the B side in the Northeast laughable in most cases with inane messages and hold times.) Doug * Interpage Network Services/CID Tech * (203) 499-5221 ------------------------------ From: sfbatl@mindspring.com (Lambert Schuyler Jr.) Subject: Needed: Network Solutions Manager Date: Tue, 31 Jan 1995 15:57:02 -0400 Organization: MindSpring Enterprises, Inc. NEEDED: Manager - Network Support Solutions (NSS) Consulting The Company: Recognized internationally as a premier professional services firm noted for its information systems integration, strategic consulting, change management and process management consulting services. The companys Telecom Industry Consulting Group, is a leader in providing consulting services to telecommunications operating companies worldwide. The Position: The group provides specialized systems integration and process reengineering consulting services in the areas of network operations support, material logistics, service delivery and service assurance. The Manager - Network Support Solutions (NSS) Consulting position offers an outstanding career opportunity for a manager with telecom carrier network operations support systems experience to join this premier consulting firm. Professional Requirements: Candidates for the position will have at least three years of experience in the telecommunications industry. Such exper ience will have included assignments with direct responsibility for the p lanning and execution of network support solutions information systems de velopment projects. A candidates experience may have been gained while working with a telecom carrier or firms that serve the telecom carrier industry such as hardware/solutions vendors, systems integrators, strategic consultants or information systems consultants. A technical undergraduate degree is expected. Compensation/Location: The financial package for the position will include an attractive salary and company provided fringe benefits. Relocation may not be required. If interested, please contact: Gabrielle Griffith (I am with an Executive Search firm) E-Mail: sfbatl@mindspring.com Fax: 404-804-1917 ------------------------------ From: Hersh Jeff Subject: Bell Atlantic ISDN, Part II Date: Tue, 31 Jan 95 11:52:00 PST In TELECOM Digest V15 #63 I wrote: > My office (located in Eatontown, NJ, area code 908) recently had two ISDN > lines installed for experimental purposes. We receive our ISDN from a > #5ESS. It was obvious, despite what is written about Bell Atlantic in > "Reengineering the Corporation," that it is very inexperienced and > unorganized in providing ISDN service. All we asked for was two ISDN > BRI lines with NT-1s. It took about two months before we were able to > get the lines installed, and we have already had to replace the NT-1s > once. Anyone else have experience with Bell Atlantic ISDN? There's another issue I neglected to mention in the original submission: billing. As I mentioned, the ISDN lines are used for experimental purposes, for maybe five to seven hours per month. Our usage bills for the latest three billing cycles are as follows (at $.05 per minute): November 94: 3228 minutes (about 54 hours) December 94: 3392 minutes (about 56 hours) January 95: 3406 minutes (about 57 hours). All time is charged for circuit switch data calls (BA's name). In no case did we actually use that much access. We have been trying to get call detail from Bell Atlantic for the specific charges (mostly dialed destination and time of day) to see if we can pinpoint the trouble. BA says it cannot provide that type of info, so that right now we're at a standoff. (I have trouble believing it can't do this.) If anyone has any experience with how ISDN is billed and if similar problems have been experienced, please let me know. We know we didn't use nearly this much time. TIA, Jeff Hersh hershj@bah.com ------------------------------ From: Judith Oppenheimer Date: Tue, 31 Jan 1995 11:51:30 -0500 Subject: More on Universal International Freephone Numbers In reference to John Carl Brown's posting on January 24th: Everything he says confirms what we have said. But it doesn't answer the question -- why are the carriers refusing to support the U.S. users that did make their wishes known? If it is such a participatory process, why are the U.S. carriers ignoring the users who are participating? I would be happy to provide *current and un-edited* documents - timeline, E.169, and more, to whomever emails their fax number to me. Judith Oppenheimer, Producer@Pipeline.com Interactive CallBrand(TM) ------------------------------ From: jpgs@gte.com (James Sterbenz) Subject: Gigabit Networking Workshop GBN'95 -- Call for Participation Date: 31 Jan 1995 13:51:26 GMT Organization: GTE Laboratories Incorporated GIGABIT NETWORKING WORKSHOP GBN'95 - Call for Participation 2 April 1995 - Boston, Massachusetts, USA Sponsored by the IEEE ComSoc Technical Committee on Gigabit Networking in conjunction with INFOCOM'95 PURPOSE AND FORMAT The purpose of this workshop is to provide a forum for presenting and discussing very recent work in gigabit networking and publishing it in a timely manner. The workshop will consist of short presentations and discussions of current work in high bandwidth networking, as well as longer discussion sessions. The workshop will take place from 8:30 AM until 3:00 PM with lunch provided. There will be an open business meeting of the Technical Committee on Gigabit Networking following the workshop at 3:00 PM. The workshop will consist of a number of short informal presentations and discussion on current research and implementation, hot topics, position statements, and controversial issues relating to high bandwidth networking. End-to-end issues including transport and higher layer protocols, host and network interface architecture, operating systems, emerging applications, deployment and management of large networks, economic and regulatory issues, security and privacy, and other societal impacts will be of particular interest. A one-page abstract of the presentation is due on 1 March 1995; all reasonable proposals will be considered (and possibly some controversial ones). The length of the presentations will be limited to 10 or 15 minutes each, with the number of presentation foils strictly limited. Presentations will appear in the online proceedings of the workshop, under URL http://info.gte.com/ieee-tcgn/conference/gbn95 or by FTP from ftp.gte.com/pub/ieee-tcgn/conference/gbn95/. Selected abstracts of the presentations will appear in _IEEE Network Magazine_ (tentatively May 1995), and presenters may be invited to submit papers to a special issue of the _Journal of High Speed Networks_ (JHSN). There will blocks of time reserved for interactive discussion sessions. Suggestions for topics will be taken in advance (email to giga@tele.pitt.edu and Cc: to jpgs@ieee.org), but will also be welcome at the workshop. Controversial topics and outrageous viewpoints are encouraged. A summary of the workshop discussions will appear in _IEEE Network Magazine_. SUBMISSION The submission deadline for the one-page abstract is 1 March 1995. Submission should be in plain text by email to the program chair at jpgs@ieee.org; please include the text "GBN'95 Submission" in the Subject: field. All submissions will be quickly acknowledged; the lack of an acknowledgment indicates that the author should contact the program chair to confirm the receipt of the proposal. Notification of accepted presentations will be made by 10 March 1995, and all accepted presenters are expected to register in advance for the workshop. At the time of the workshop, an electronic version of the presentation foils will be due for inclusion in the online proceedings. Submission in postscript and/or HTML is encouraged; if these formats are not possible, plain text will be accepted. REGISTRATION Registration for the workshop will be handled as part of INFOCOM'95 registration; information is available: on the WWW http://www.research.att.com/~hgs/infocom95/program.html by anonymous FTP gaia.cs.umass.edu/pub/hgschulz/infocom95/progam.txt email request to infocom95@fokus.gmd.de Additional copies of the GBN'95 CFP are available: on the WWW http://info.gte.com/ieee-tcgn/conference/gbn95/cfp.html by anonymous FTP ftp.gte.com/pub/ieee-tcgn/conference/gbn95/cfp.txt email request to jpgs@ieee.org The home page for the TCGN is URL http://info.gte.com/ieee-tcgn, and has additional information. PROGRAM CHAIR PROGRAM COMMITTEE James P. G. Sterbenz Nim Cheung, Bellcore GTE Telecom. Research Laboratory Dave Feldmeier, Bellcore 40 Sylvan Road MS-61, Bryan Lyles, Xerox PARC Waltham, MA 02254 USA Ira Richer, MITRE +1 617 466 2786 Dick Skillen, Northern Telecom jpgs@ieee.org Richard A. Thompson, Univ. of Pittsburgh http://info.gte.com/jpgs Shukri Wakid, NIST James P.G. Sterbenz Senior MTS, Broadband Intelligent Networks jpgs@{acm|ieee}.org GTE Telecommunications Research Laboratory +1 617 466 2786 40 Sylvan Road MS-61, Waltham, MA 02254 USA http://info.gte.com/jpgs ------------------------------ From: ulmo@panix.com Subject: Does AT&T 7506 TAD 03A Pass CID to RS232 of Orignating Caller? Date: 31 Jan 1995 06:13:25 -0500 Organization: URL:http://www.armory.com/~ulmo/ (see rivers.html for PGP key) An early reply would be appreciated ... Today I'm ordering my AT&T 7506 TAD 03A and ISDN service with NYNEX. Does this particular 7506 pass the CID of each caller to the RS232? I want to plug my computer in and have it look into my customer database and pop up the record for the customer before I even know the phone is ringing. I'll program it. I just want to know if the firmware allows it, and how. Thanks. ------------------------------ End of TELECOM Digest V15 #67 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa00804; 31 Jan 95 23:41 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA19693; Tue, 31 Jan 95 19:09:13 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA19685; Tue, 31 Jan 95 19:09:08 CST Date: Tue, 31 Jan 95 19:09:08 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502010109.AA19685@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #68 TELECOM Digest Tue, 31 Jan 95 19:09:00 CST Volume 15 : Issue 68 Inside This Issue: Editor: Patrick A. Townson WAN Compression For Data Networks (Jim Williams) Book Review: "LANtastic Quick Reference" by Talbot (Rob Slade) MCI Bureaucratic Blunder (Richard Wildman) Hidden Features in Panasonic Telephones (Douglas Pokorny) Business/Residential Long-Distance/800 at 12.9 Cents/Minute (Tom Fellrath) Digital PBX Transmission Standards, Devices (Peter J. Kerrigan) CCITT TCAP Message Format (Hari Kalva) The Cost of Technology (James Bellaire) Question About CT2 / Cellular Service (Aries Hackerman) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Tue, 31 Jan 1995 20:49:12 -0800 From: routers@halcyon.com Subject: WAN Compression for Data Networks Some general comments regarding compression. First do you know about the Motorola 326X FAST V.34? It has SDC at 28.8 with 85Kb sync thruput, and up to 128 async thruput. Motorola also has a 56Kp DSU/CSU with SDC that has 256Kp thruput on a DDS circuits It also has two TDM ports for ASYNC or SYNC traffic up to 19.2 that allow you to piggy back async on top of your SNA traffic. They sell for less than $1500ea. Most compression is done via software in routers. Most like Cisco partnership with a compression company such as Magnalink. When adding a compression stand alone device to a network ie they fit between the router and the DSU, and are no problem. For more information on compression products contact our FTP site at . Please feel free to examine other leading edge technologies listed in this FTP list. If you have any questions please call me at 1-800-837-4180. Regards, Jim Williams CODEX 3500 SERIES 3512-SDC BANDWIDTH EXPANDER DSU ------------------------------- Overview: Data Communications managers are increasingly faced with requirements for higher data transmission speeds, shorter response time and lower telecommunication budgets as networks migrate from traditional terminal-to-host legacy applications to those supporting LAN internetworking. The Motorola Codex 3512 SDC Bandwidth Expander DSU is ideally suited to this changing environment. The 3512 SDC Bandwidth Expander provides Synchronous Data Compression (SDC) on HDLC/SDLC framed data in one port while two additional ports support the lower bandwidth requirements of polled, legacy data and/or restoral requirements. The 3512 Bandwidth Expander is an intelligent, high-speed digital access device providing up to four times the available bandwidth using existing low cost DDS-I or DDS-II secondary channel type leased-line facilities. The 3512 SDC Bandwidth Expander DSU opens new dimensions in network design, flexibility, productivity and cost reduction by providing benefits such as: * Compression up to 4:1. * Reduction of bandwidth requirements without reducing performance. * Extends the useful life of existing telco facilities and equipment. * Reduction in file transfers and quicker response time. * Flexibility for future applications and network migration. The 3512 Bandwidth Expander DSU is available in standalone and rackmount configuration and offers all the features, performance, functionality and reliability of the 3512 family of digital leased-line DSU/CSU's. Product Highlights: * Transmits Synchronous HDLC/SDLC framed data at rates up to 256 Kbps over 56 Kbps point-to-point digital leased-lines providing cost-effective, superior performance LAN-to-LAN internet- working. * Three Ports Standard. One compression port for transmission speed reaching up to 256 Kbps (Port 3). The two remaining uncompressed ports, each supporting speeds up to 56 Kbps. * Port Two of the 3512 SDC Bandwidth Expander supports operation as an intelligent A/B switch for restoral of failed WAN links at rates up to 72 Kbps over analog dial circuits, and up to 256 Kbps over switched digital services (e.g. Switched 56). * Flexibility in network design with support for Point-to-Point and Multipoint Time Division Multiplexing (TDM), port sharing (MSU) and mixed TDM/MSU. High bit rate efficiency provides up to 55.2 Kbps available bandwidth in TDM modes with 56 Kbps service. Mixed compression and TDM is supported. * Integral asynchronous to synchronous conversion of non- compressed data is supported up to 19.2 Kbps. Limited distance modem operation is supported for point-to-point private wire circuits in DDS-I and DDS-II SC modes. Benefits: 1. The 3512 SDC Bandwidth Expander provides rapid pay back by providing the bandwidth of more expensive fractional T-1 services over conventional digital services to 56Kbps. 2. The 3512 SDC lets you build networks that support existing applications today with a migration path for future applications to be efficiently absorbed into an existing corporate network. 3. As a three port digital access device, the 3512 SDC Bandwidth Expander is a modular and flexible low-end data mux supporting mixed legacy terminal-to-host applications and LAN traffic over a single circuit. 4. The 3512 SDC Bandwidth Expander lets you continue your optimum throughput even when your primary digital leased-line fails. The 3512 SDC Bandwidth Expander features an intelligent A/B switch for optimum restoral at rates as high as 72 Kbps over analog dial circuits or 256 Kbps over switched digital circuits. Since it is unlikely that throughput demands will diminish or that communication budgets will increase, you should investigate the 3512 SDC Bandwidth Expander. Motorola Codex offers a total solution by providing an economical and cost effective digital service up to 256 Kbps at a fraction of the cost of competing products. The 3512 SDC is simple, reliable and economical. SPECIFICATIONS Service Types * Supports digital data services in the U.S. and Canada conforming to AT&T Technical Reference 62310: Inter-LATA carriers including AT&T (DATAPHONE(r) Digital Service and Accunet(r) Spectrum of Digital Services), MCI (Digital Data Service) and US Sprint (Clearline DDS) as well as service offerings from the Regional Bell Operating Companies and independents Operating Mode * Full-duplex, point-to-point and multipoint; compressed channel point-to-point only Digital Aggregate Interface * DDS-I type facilities: 2.4, 4.8, 9.6, 19.2 and 56 Kbps * DDS-II SC type facilities: 3.2, 6.4, 12.8, 25.6 and 72 Kbps providing primary channel rates of 2.4, 4.8, 9.6, 19.2 and 56 Kbps respectively plus secondary channel Data Format * Synchronous: serial, binary * Asynchronous: serial, binary 6 - 9 bit including parity bit * Compression Port: HDLC/SDLC framed data (NRZ or NRZI coding) Data Encoding * Bipolar, return to zero, alternate mark inversion Port Timing * Network, internal, external or station DSU Timing * Network, internal or external (external for DDS-I only) DTE Port Interface * Front panel selectable EIA 232-D or V.35 on ports I and 2; V.35 on port 3 * 25 Pin DB-25 connector (port 1); EIA 232-D alternate DB-26 subminiature connectors (ports 2 and 3) DTE Port Rates: Ports 1 and 2: * Synchronous: 1.2, 2.4, 4.8, 7.2, 9.6, 14.4, 16.8, 19.2, 21.6, 24.0, 28.8, 32.0, 38.4, 48.0 and 56.0 Kbps 7 * Asynchronous: 2.4, 4.8, 7.2, 9.6, 14.4, and 19.2 Kbps Port 3: * Synchronous: 1.2, 2.4, 4.8, 7.2, 9.6, 14.4, 16.8, 19.2, 21.6, 24.0, 28.8, 32.0, 38.4, 48.0, 56.0, 64, 112, 128, 168, 192, 256 Kbps NOTE: Port rates less than 9.6 Kbps not supported in compressed mode * Asynchronous: 2.4, 4.8, 7.2, 9.6, 14.4, and 19.2 Kbps NOTE: Asynchronous data not supported in compressed mode Network Management * Network management support by the Codex 9800 and 9300 * Direct LPDA-2 interface to IBM NetView_ with Codex DualVIEW option * Monitoring via Novell NetWare(tm) with WANVisible(tm) NLM * Management Protocols Supported: - Codex Proprietary Protocol - Link Problem Determination Aid (LPDA) Revision 2 (Ports 1 & 2 only; Port 3 in direct mode only) * IBM Software/Protocol Compatibility: - NetView Version 1.3 or later - ACF/NCP Version 4.2 or later - Lines configured for either SDLC or BSC * Network control channel: - Data format: Asynchronous, serial, binary, compatible with Motorola Codex Network Management Systems (NMS) - Data Rate: Selectable 75, or 150 bps - Line overhead in DDS-I derived secondary channel mode: 113, 181 and 800 bps with 9.6, 19.2 and 56 Kbps service respectively Power Requirements: * 3512 SDC Standalone: 110 or 230 VAC nominal; 47 to63 Hz * 3512 SDC Nest Card: 110 or 230 VAC nominal; 47 to 63 Hz -48 VDC * Environment - Operating temperature: 320 to 1220 F. (0 to 500 deg C.) - Non-operating temperature: -400 to 1580 F. (-400 to 700 C.) - Operating relative humidity: 10% to 95% non-condensing * Physical Dimensions - 3512 DSU/CSU Standalone: Height: 2.3 in (5.8 cm) Width: 6.6 in (16.8 cm) Depth: 9.6 in (24.4 cm) Weight: 2.5 Ibs (1.1 kg) - 3500 Mini-Nest Enclosure: Height 7.0 in (17.8 cm) Width 19.0 in (48.3 cm) Length 10.0 in (25.4 cm) Weight (empty) 22 lbs (10.0 kg) * Certification - UL Listed and CSA Certified - FCC Part 15 Class A Compliant - FCC Part 68 Registered - Bell Canada Approved ------------> For further information on prices, warranty extensions, upgrades, and service, please contact: Router Solutions 5527 Preston Fall City Road Fall City, WA 98024 USA 800-837-4180 (USA and Canada) 206-644-6082 (other locations) Fax: 206-222-7622 Email: routers@halcyon.com Please check our FTP site for additional product literature and current prices: ftp.halcyon.com /pub/local/routers ------------------------------ Date: Tue, 31 Jan 1995 13:10:25 EST From: Rob Slade Subject: Book Review: "LANtastic Quick Reference" by Talbot BKLNTSQR.RVW 941206 "LANtastic Quick Reference", Talbot, 1992, 0-934605-78-5, U$14.95 %A David Talbott %C 1580 Center Dr., Santa Fe, NM 87505-9746 %D 1992 %G 0-934605-78-5 %I Onword Press %O U$14.95 800-842-3636 %P 164 %T "LANtastic Quick Reference" While LANtastic has made a name as a simple, minimally intrusive, peer-to-peer network for sharing disks and printers, its documentation has become increasingly complex. This book can serve as a reminder of the various command and function options. For basic commands, this may be enough: for more advanced items, it can serve as an introduction to the correct section of the program documentation. The book is divided into three sections: User, System Manager, and Installer. The last is a bit brief, being merely a listing of ArtiSoft network interface card settings, and the command-line switches and options for the basic network drivers. The lack of any mention of NDIS is unfortunate. Ironically, the author seems to be extremely proud of the indexing job on the book. There *is* an index, but it is quite brief, and hardly a selling point. Nevertheless, this book is doubtless well worth the price for those working with and managing LANtastic networks. copyright Robert M. Slade, 1994 BKLNTSQR.RVW 941206 Vancouver ROBERTS@decus.ca Institute for Robert_Slade@sfu.ca Research into rslade@cue.bc.ca User p1@CyberStore.ca Security Canada V7K 2G6 ------------------------------ From: rich@hpfcla.fc.hp.com (Richard Wildman) Subject: MCI Bureaucratic Blunder Date: 31 Jan 1995 21:45:38 GMT Organization: Hewlett-Packard Fort Collins Site This is a sad tale of bureaucratic bungling at its worst. I have been an MCI customer since the initial choose your long distance caller days; we recently had a run in with MCI bureaucracy which has soured us on MCI, and convinced us to change to another carrier. It is truly a case for the books. For some reason, U.S. West or MCI changed the way we were being billed in October. Neither knows why or what happened, and neither will admit to any fault of their own. Rather than receiving our long distance billing on U.S. West bills, MCI begin to bill us separately, or so they thought. We finally inquired why we were not receiving an MCI bill for long distance calls. Nobody would admit to a thing, but conversations with MCI revealed that they had been sending it to an old address -- one we had not lived at for five years. But the drift of the conversation was that we were at fault for not paying the bill we had never seen. They said they would send the bill to the correct address. No bill came. We got a call from MCI Financial Services in St. Louis giving us warning that the bill had not been paid, and that we would have to deal with a collection agency shortly. We told them we had not seen the bill. Not their problem -- they had sent it. I suggested they send it by registered mail, so that at least we and they would know what's going on. Nope, can't do that -- it is your responsibility to pay the bill -- MCI sends their bills by first class mail -- all that is legally required. I even offered to pay for overnight registered mail. No go. Asked to speak with a supervisor, but I was hung up on. Finally got hold of a young man who seemed inclined to listen to what was going on. Yes, he too thought something did not make sense. For a couple of decades, no billing problems, but all of a sudden, one day, we stop paying our bills. But, sorry, it has been assigned to financial services, and there was nothing he could do -- his hands were tied. Only after a very lengthy conversation did we learn that we could pay the bill by credit card (one time only though) by calling a certain number. We have to rely on MCI having the actual amount of the bill correct, because to this day, we have not seen any billing for the two and half months in question. Given MCI's recent performance, we do not have a lot of faith, but did it anyway, just to get rid of them, and the harassing phone calls. My best guess at what happened traces to a $35 billing mistake made by U.S. West last May. That too required several telephone calls, and a copy of a cancelled check with U.S. West endorsement on the back to convince them a mistake had been made. However, the amount kept showing up on our bill each month until October, because, we were told, it could not come off our bill until they found where the error was made! October was the last month we received a billing from MCI on the U.S. West bill, and it was only for part of the month. So, suspicions are that an error made by U.S. West in finally correcting their bill to us created the problem with MCI, and started the dominoes cascading. If this is true, it still does not explain why MCI has things so screwed up, nor why they would screw over what had been a long-time very good customer for them. And I would not bet two cents that this whole ugly episode if over. It's a brave new world -- Kafka must be smiling. Disgruntled, and no longer an MCI customer. R W - Fort Collins, Colorado ------------------------------ From: drp@cs1.bradley.edu (Douglas Pokorny) Subject: Hidden Features in Panasonic Telephones Date: 31 Jan 1995 15:49:13 -0600 Organization: Bradley University Most Panasonic Telephone/Answering machine combos can have various features turned on and off by pressing the program key followed by several digits on the keypad, and hitting store. (This is done without specifying a memory location for a stored telephone number.) An example of this is the ability to turn on and off the "15-second beep" which occurs when recording telephone conversations. The user's manual which comes with these phones only contain partial lists of these codes. (e.g., they tell you how to turn the beeping on, but not off.) Does anyone know of a comprehensive list of "hidden features" for various models of Panasonic telephones? Douglas R. Pokorny Happily running: drp@camelot.bradley.edu OS/2 3.0 & Workplace Shell MS-Windows NT 3.5 This mesage posted with Linux 1.1 & OpenLook X-Windows OS/2 3.0's SLIP software PC-DOS 6.3 & MS-Windows 3.11 ------------------------------ From: Tom Fellrath Subject: Business/Residential Long-Distance/800 at 12.9 Cents/Minute Date: Tue, 31 Jan 95 12:50:26 -0500 Organization: Delphi (info@delphi.com email, 800-695-4005 voice) I just came upon this when investigating ways to cut costs on basic everyday services like telephones. There's a company that offers 12.9 cents per minute on ALL long- distance calling -- both inbound 800's and outbound (1+ calling). When I called them, they told me that this program was available to anyone, be it residential or business phone customers. I don't know what you think of 12.9 cents, per minute, but I was on what I thought was a GREAT business program for my home phone where I was paying roughly 16 cents a minute. By switching to this, my $100 monthly phone bill is going to drop to $80! That's 20 percent savings off what I THOUGHT was a good program. I don't even have to wait until after business hours to get the low rates! This program is 12.9 cents ALL THE TIME, calling to ANYWHERE IN THE UNITED STATES. If you want more information, please reply with your fax number. I saved what these people sent me and would be happy to send it along to you. If you don't have any accessibility to a fax machine, please give me your address and I'll send printouts along to you. Take a look! This is the best long-distance program I've ever seen. Tom Fellrath tdfellrath@delphi.com [TELECOM Digest Editor's Note: Tom, I am wondering why you did not give us the name of the company and their address/phone/fax number so people could contact them directly. By chance, are you a commission sales agent for this wonderful company with their great program? And do you mean to tell me there are no catches at all? No long term contracts, no monthly minimum requirements? Very interesting ... but why don't you want people to contact them directly? Or are *they* the ones that don't want to be contacted directly? ... most MLM programs are like that. Readers, if any of you get anything from Tom on this, please share it. PAT] ------------------------------ From: pjk@mcs.com (Peter J. Kerrigan) Subject: Digital PBX Transmission Standards, Devices Date: 31 Jan 1995 12:53:00 -0600 Organization: Joe's Bar and Grill I would like to a more sophisticated Voice Mail interface to my Digital PBX (Intertel GMX-152D), than I currently can with an analog port. I really want access to the signaling and call progress info that's available on the digital lines only. Intertel has no clue how this could work (they only know that model X set plugs into model Y port). Do PBX's use generally accepted standards for digital transmission (such as Bellcore's ISDN) or is it roll-your-own? I looked in lcs.mit.edu:/telecom-archives, no mention of digital telephony. Peter J. Kerrigan pjk@mcs.com [TELECOM Digest Editor's Note: Digital telphony is an area that does not have the coverage it should have in the archives, sad to say. Maybe I will get some good files on the topic to include there some day. PAT] ------------------------------ From: hari@ctr.columbia.edu (Hari Kalva) Subject: CCITT TCAP Message Format Date: 31 Jan 1995 19:04:49 GMT Organization: Columbia University Center for Telecommunications Research Hi TCAP experts! I am working on a CCITT(White book) TCAP application. I need some help in the TCAP white book message format. I would like to know the purpose of the DIALOG portion of TCAP message. Also, I would like to get a HEXDUMP of WHITE BOOK TCAP message. Thanks in advance, Ajay Vasanadu NewNet Inc. Monroe, CT Please reply to: hari@ctr.columbia.edu ------------------------------ Date: Tue, 31 Jan 95 04:03 EST From: bellaire@iquest.net (James Bellaire) Subject: The Cost of Technology I was looking throught the front pages of the local telco directory for Marion, IN (an Ameritech town) when I came across the price list for "custom services." They charge $7.50 for Caller-ID and offer free *67 per call blocking to all customers. I don't want to get into a discussion of how much your telco charges for Caller-ID or any other service. I was just thinking, how much does it cost them? The cost of offering caller ID to the telco is the software that handles the procedure, the hardware that allows that software to work, memory space for that software to reside, maintainance costs for techs that could be fixing something else if CID were not there, etc. Obviously the marketing idea is to spread the capital and upkeep costs across the user base, so a high price for a new service is expected with prices falling when it is accepted and widely used. So cost plus profit = price charged. Now imagine if CID became a basic service, similar to tone dialing. Every line would be given it "free of charge." Of course the basic rate service may need to be bumped up a little in price, since CID does cost the telco something. An area with a 10% subscription rate would need to charge 75c to all customers to 'break even.' An area with a 5% subscription rate would only have to boost the bill 37.5c. So your non-technical "it rings, I answer it and ASK who is calling" neighbors will subsidize the highly technical "my PC VoiceMail takes all blocked and out of area calls; it even blows a whistle and hangs up when I get the CID of teleslease!" type of phone customer. The cost of the software is another interesting question. The telco gets to pay the price set by the writers. How much did it cost the writers? This is where we can get into lots of numbers, including salary for years in development, benifits paid to the software techs, etc. But I digress ... The cost of an item is the price you are willing to pay. The price of the item is set by the person who owns it. If the owner AGREES to give the item to you an a lower price, or free (the best price except when someone pays you to take it from them) you are lucky. And the old owner gets to write down the price he offered you in his income column. If you don't pay the price, you don't get the item. If you take the item without paying the price, you are a thief. And the old owner gets to complain about losing the price he offered you, not his cost, but the price he would have sold it for. If you wouldn't have bought the item at the owners price, even though you disagree with it, IT DOESN'T MATTER. You are still a thief if you take it. If the old owner claims an outrageous price, above that whith they would normally charge, for a stolen item then they are a thief. It doesn't make the original thief any better of a person. Each person must own his own failings, each company its own reputation. If you don't like the way a company does business, go somewhere else. If you can't, buy stock until you can take over the management. Until then be your own person and do right as you should. If another's wrong makes it ok for you to do wrong to them, then your wrong makes it ok for someone to do wrong to you. If you rob the phone company don't complain when someone robs your house, after all your thief was just stealing from a thief that stole from the telco! Something to ponder as you lie down your head tonight. Goodnight, bellaire@iquest.net James E. Bellaire ------------------------------ From: aries@mis.bppt.go.id (Aries Hackerman) Subject: Question About CT2 / Cellular Service Date: 31 Jan 1995 04:08:20 -0600 Organization: UTexas Mail-to-News Gateway Hello all, It's common nowadays that several carriers operate on the same telecom services. For example, cellular operators of CT2 standard. Since I'm a kind of 'newcomer' in providing telecom services (cellular) I'd like to know how it works in the sharing methods between two /more operators. That question relates to these subjects: 1. Operation; 2. Project; 3. Interconnection Agreement; 4. Charging / Billing. Illustrations: 1. Operation: The building and maintenance of the base stations Is it 50 - 50 or other method? 2. Interconnection Agreement: suppose subcribers of other operators use 'our' base stations while those operators do not have agreements with us. What's the common method used to solve this kind of situation? 3. Billing / Charging: in case there are 'flat rate users' and 'pulse rate users'. Please reply to 'aries@asterix.bppt.go.id' since we don't have 'direct' news service, yet. I'm particularly interested in providing CT2 service. Many many thanks in advance! If you have any useful information about CT2, it will be very helpful. Aries ------------------------------ End of TELECOM Digest V15 #68 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa01298; 1 Feb 95 0:25 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA20741; Tue, 31 Jan 95 19:46:43 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA20734; Tue, 31 Jan 95 19:46:41 CST Date: Tue, 31 Jan 95 19:46:41 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502010146.AA20734@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #69 TELECOM Digest Tue, 31 Jan 95 19:46:00 CST Volume 15 : Issue 69 Inside This Issue: Editor: Patrick A. Townson GEnie Services Offers Free Japan Access Until Further Notice (Finkenstadt) Job Posting: Aspect Telecom, CTI Product Marketing Manager (James McDonald) FAQ'S re: Connectivity Options (routers@halcyon.com) Federal Judge Rules Against FCC - Historical Precedent (Bill Sohl) Clock Slips Again (Martin McCormick) Emergency Cellular Phone (Testmark Laboratories) Ericsson GH337/EH237 Cellular Modem I/F (Alfredo E. Cotroneo) Metro Mobile (CT/RI/MA) Added to the NACN (Doug Reuben) Product to Prevent PBX Phone Fraud (Paul Murray) Electro 95 Electronics Conference, June 21-23, Boston (Paul R. Baudisch) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Tue, 31 Jan 1995 18:04:16 -0500 From: Andy Finkenstadt Subject: GEnie Services Offers Free Japan Access Until Further Notice January 23, 1995 -- GEnie Services is offering free access to its online service to all current and new GEnie members in Japan to assist in restoring the lives of Kobe and Osaka earthquake victims and establish a communications vehicle both in Japan and around the world. Effective immediately and until further notice, GEnie will waive all usage fees as well as the standard connect fee for all GEnie users in Japan. "The tragedy in Japan has struck all of us. Although too small a token of our desire to help, we hope that free access to the worldwide interconnectivity of the GEnie network and specifically our Japanese roundtable will help concerned citizens around the world keep in contact with affected locals", said Mark Walsh President of GEnie Services. "We hope that life soon returns to normal and wish only that we can help the process." The Japanese roundtable is an online meeting place for users with an interest in Japanese affairs. The forum is accessible to GEnie users around the world. GEnie Services, which became operational in 1985, is one of the leading online information services with subscribers around the world. GEnie had been available in Japan since December 1988. GEnie Services is a part of GE Information Service, Inc., which is headquartered in Rockville, Maryland. For more information about GEnie, send electronic mail to info@genie.com, visit the GEnie gopher (gopher to gopher.GEnie.com), the GEnie web (use an URL of "http://www.GEnie.com"). andy@genie.geis.com Andy Finkenstadt, GEnie Sysop, GEnie Postmaster postmaster@genie.com personal account: genie@panix.com Andrew Finkenstadt andy@genie.geis.com Gaithersburg, MD 301-975-9890 ------------------------------ From: james_mcdonald@interramp.com (James McDonald) Subject: Job Posting: Aspect Telecom, CTI Product Marketing Manager Date: 31 Jan 1995 23:45:09 GMT Organization: Aspect Telecommunications, Inc. Reply-To: pball@cctosmtp.west.aspect.com Aspect Telecommunications, the market leader in stand-alone Automated Call Distribution systems, is announcing the following position: Product Marketing Manager, Computer-Telephony Integration, San Jose, CA ESSENTIAL FUNCTIONS OF THE POSITION (Include special duties and responsibilities) This senior level Product Marketing Manager will: Perform a catalyst role for Aspect's long-term computer-telephony product strategy and direction. Define market forces, opportunity, and metrics, and paint a long-term CTI product vision for Aspect with ROI analysis and business case justification. Define business expansion and market development strategies for Aspect's CTI product line. Develop marketing requirements for CTI products within the framework of the long-term product vision, and define a roll-out plan for delivering the individual products to market. Develop product positioning, packaging and pricing strategies, and champion the product launch process for CTI products. QUALIFICATIONS (Include technical skills, education and experience): BA/BS; MS/MBA a plus. This person must possess strong technical and business analysis skills in order to quickly assess and remain abreast of the state of the CTI industry. This includes synthesis of any promising new technologies, new applications of technology, standards activities, changes in buyer behavior and expectations, strategic vendor positioning or moves, etc. They must also must possess excellent interpersonal skills to quickly gather and distill information, to build relationships with strategic vendors outside of Aspect and with many key people within Aspect, and to evangelize and champion their CTI-related ideas within Aspect. (Minimum requirements.) Seven or more years experience in one or more of the following areas: product marketing, product management, strategic planning, business development, systems integration, and/or international marketing for advanced telecom or data products. (Preferred qualifications.) Knowledge and experience with CTI products and with systems integration in multi-vendor environments. Please send resume to: Phyllis Ball Aspect Telecommunications, Inc. 1730 Fox Dr. San Jose, CA 95131 or by E-mail in ASCII or Microsoft Word for Windows 2.0 format (uuencoded) to: pball@cctosmtp.west.aspect.com ------------------------------ From: routers@halcyon.com Subject: FAQ'S re: Connectivity Options Date: 31 Jan 1995 02:00:45 GMT Organization: Northwest Nexus Inc. This posting may be freely distributed to Internet and commercial online sites. Keywords: UTP distance standards, campus networks connectivity, ethernet, wireless, LAN, microwave, repeaters, video 1. QUESTION: What is the maximum bandwidth that 4-wire copper UTP can handle in campus environments? ANSWER: ---E-1 up to 2.5 miles (4 km) 2. QUESTION: What is the longest distance that 4-wire copper UTP can transmit at T-1 band width? ANSWER: ---5 miles (8 km), up to 7 miles (11.2 km) with a repeater 3. QUESTION: Can you transmit data, voice, and video across 4-wire UTP at the same time without cross-talk? ANSWER: ---Yes 4. QUESTION: What is the maximum distance that ethernet at 10 Mbps can be extended? ANSWER: ---1500 ft (495 m), up to 3000 ft (990 m) with repeater 5. QUESTION: Is there a wireless solution that would allow a campus to connect all buildings together, and allow any PC or laptop computer on campus to communicate, even if they move about the campus? ANSWER: ---Yes. One solution allows building -to- building connections up to 6 miles (9.6 km), and allows any PC or laptop to be on line. It operates at 2 Mbps, has SNMP, and requires no FCC licence. 6. QUESTION: Are there any wireless solutions at 10 Mbps for LAN-to-LAN connections? ANSWER: ---Yes. A microwave solution allows LANs to connect up to 5 miles (8 km). This same system has options that will allow voice, data, and video at the same time, in either 4 -T1 slots, or 8 -T1 slots. The 8 -T1 version can handle 192 voice-grade circuits. For further information and product data sheets, please contact Router Solutions (routers@halcyon.com), or check our FTP site: ftp.halcyon.com /pub/local/routers ------------------------------ From: billsohl@earth.planet.net (Bill Sohl Budd Lake) Subject: Federal Judge Rules Against FCC - Historical Precedent Date: 31 Jan 1995 17:33:27 GMT Organization: Planet Access Networks - Stanhope, NJ I offer the following to the telecom newsgroup as it indirectly relates to an entire series of postings related to the allegation that operation/use of radio receivers/scanners that have been modified is illegal. From the post below relating to the problems the FCC is having just enforcing its laws/regulations against actual pirate broadcasting, is there anyone that can even perceive the FCC has any resources to worry about the thousands of people using and/or modifying radio scanners to receive cellular telephone broadcasts? I think not. As before, don't kill the messenger. I point this out to illustrate the practical side of life and the law as opposed to those that suggested illegal activity was going on by modifying radios. Bottom line is ... no one cares, least of all the FCC. Begin post from misc.legal.moderated newsgroup In another newsgroup, Stephen Dunifer (frbspd@crl.com) wrote: Victory for Micro Power Broadcasting - Historical Defeat for the FCC On Friday, January 20 Federal judge Claudia Wilken refused to grant the Federal Communications Commission a preliminary injunction to stop the micro power broadcasts of Stephen Dunifer and Free Radio Berkeley. Stating serious constitutional concerns as her reason, Judge Wilken denied the request, ordered the FCC to exhaust administrative remedies and to rule on Dunifer's appeal of their $20,000 fine before seeking any further court action. This ruling sets a historical precedent: it is the first time the FCC has been denied an injunction to stop the broadcasts of an unlicensed radio station. The Commission will have to address the issue of the constitutionality of their regulations when ruling on Dunifer's appeal. Any further court proceedings are delayed until the FCC acts on the appeal which has languished in Washington for more than a year. In the meantime the government's attempt to enjoin broadcasting by non- licensed micro radio has been put on hold. Luke Hiken, attorney for Stephen Dunifer, stated, "This is the second time a Federal court has recognized the constitutional implications of micro radio technology. We hope the FCC will recognize the importance of facilitating the use of this technology for the benefit of the American people instead of denying its existence and obstructing its use." Speaking on behalf of the National Lawyers Guild Committee on Democratic Communications, Peter Franck commented, "The CDC hopes that the court's refusal to enjoin micro radio is the beginning of a recognition by the country that any hope for democracy depends on free access to the airwaves. Micro power broadcasting has the potential for creating a 'green movement' of low-cost, easy-to-use media. It is as totalitarian to require expensive, hard-to-get licenses for micro radio as it would be to say you can only speak from a soap box if it is made of gold." Stephen Dunifer said, "Judge Claudia Wilken's decision affirms the validity of our legal position. Further, this victory is a credit to four years of work by the National Lawyers Guild Committee on Democratic Communications and my attorney, Luke Hiken, on behalf of the micro power broadcasting movement. Unlike FCC attorney, David Silberman, I do not see irreparable harm resulting from micro power broadcasting. Instead, I see an immeasurable benefit for all citizens if the micro power broadcast movement prevails. For too long, media access and the tools of communication have been concentrated in the hands of corporate and essentially anti-democratic interests. If any harm results, it will be to those monopoly interests." For further information contact: Free Radio Berkeley - (510) 644-3779, (510) 464-3041 or Luke Hiken, attorney at law - (415) 705-6460. Email: frbspd@crl.com or hiken@igc.apc.org. Send request to frbspd@crl.com for information packet. Legal briefs and documents are available at our ftp site - ftp.crl.com. Directory path is ftp/users/ro/frbspd/legal. -------------------------- Bill Sohl K2UNK (Budd lake, New Jersey) (billsohl@planet.net) ------------------------------ From: Martin McCormick Subject: Clock Slips Again Date: 31 Jan 1995 19:27:51 GMT Organization: Oklahoma State University Stillwater, OK I am pretty sure that we have a chronic case of clock slippage somewhere in the interface between our campus' Ericsson MD110 and the Southwestern Bell trunks. I would like to prove it once and for all. It occurred to me that a modem sending a steady carrier such as is used to establish a 300-baud connection would be a perfect signal generator. It could be placed on a line off-campus and then called from on-campus. An oscilloscope placed on an analog campus line should show clock slips as sudden phase shifts in the carrier. Is this a valid test? If so, we could show the phase shifts through such a line and then demonstrate that no such problems occur on campus or between two Southwestern Bell lines. Any suggestions are appreciated since the feeling is that there is really nothing wrong because the lines all sound clean and voice calls don't get dropped. With a 2025hz tone, a clock slip should advance or retard the carrier 90 degrees which should truly destroy the phase component of a data transmission. Martin McCormick WB5AGZ Stillwater, OK OSU Computer Center Data Communications Group ------------------------------ Date: Tue, 31 Jan 95 18:00 EST From: Testmark Laboratories <0006718446@mcimail.com> Subject: Emergency Cellular Phone I once heard of a cellular phone that was intended primarily for emergency use, something to carry in a car for instance. One could purchase it, have it authorized, and pay no monthly fee. If one used it, they paid a fairly high per minute airtime that was automatically charged to a major credit card. Does anyone know of a product like this? John Combs, Project Engineer, TestMark Labs, testmark@mcimail.com ------------------------------ From: 100020.1013@compuserve.com (Alfredo E. Cotroneo) Subject: Ericsson GH337/EH237 Cellular Modem I/F Date: 31 Jan 1995 14:56:13 -0600 Organization: UTexas Mail-to-News Gateway I am looking for information on availability of cellular modem I/F for the Ericsson GSM GH337 model, and for the European TACS version EH237. For both models the modem I/Fs are not apparently on sale (yet) on the Italian market. An Italian reseller also told me that in it is not possible (yet?) to operate any modem/data communication over the Italian GSM network; I made some experiment myself sending a modem signal over the voice channel, but had no success, apparently for the losses induced by the quantization/compression on GSM. I would be most interested in knowing your experiences -- good or bad -- with the use of the GSM version of this phone, for both voice and data (?). Please cc by e-mail to : 100020.1013@compuserve.com, since I do not get a regular news-feed. Thanks, Alfredo Cotroneo Milano, Italy ------------------------------ From: dreuben@interpage.net (Doug Reuben) Subject: Metro Mobile (CT/RI/MA) Added to the NACN Date: Tue, 31 Jan 1995 13:23:46 EST After years of holding out, Metro Mobile CT/RI/Western and Southeastern Mass (collectively known as Bell Atlantic's Northeast service area) has been added to the NACN. The NACN, or North American Cellular Network, is the A-side's automatic call delivery service, initiated by McCaw Cellular and some of it's roaming partners, to provide increasingly seamless coverage throughout the US and Canada. Prior to Metro Mobile's addition to the NACN, Metro Mobile CT and Western Mass customers had the use of most of their features as well as call-delivery to Cell One/NY, ComCast/NJ-PA-DE, Metro Mobile/RI-SE Mass, Cell One/Boston, and CO/Boston's Concord, NH "partnership" service with Atlantic Cellular. So the addition of the NACN won't make too much of a difference in terms of added coverage near Metro Mobile's territory. Moreover, Metro Mobile, unlike CO/NY, will assess a roam charge for most (all) markets outside of it's properties, Boston, and NY. Additionally, the link between NY and CT (and everywhere else) seems to lack the functionality of a typical NACN link. I've noticed that ALL features normally available to a customer on his/her home system are also available on a visited system (although some switches won't allow this.) Thus, Cell One/Boston customers can *successfully* set up and remove voicemail from most NACN systems, as well as get call-waiting, yet on Metro Mobile's switches, the same Boston customer will find that none of these features will work. Additionally, Metro Mobile customers roaming in NY can not, for example, forward calls to voicemail, selectively unforward unconditional forward calls (by using *723), etc., even though these same features are currently available to Boston customers roaming in NY, and even though both Boston and CT use the same type of switches (Motorola EMX-2500). I've asked CO/NY for years to put in the *723 code so I could use forwarding in NY without killing voicemail, but they were never able to implement it, so it seems as if the same old link to CT is still in place, but somehow Metro Mobile is now "on" the NACN in some limited way. (If they were "fully" connected, I'd expect to be able to use my features in NY or SF or wherever to the same extent that I can use my Boston them from my Boston account.) Additionally, the standard NACN Do Not Disturb codes (*350/*35) will NOT work in NY, instead, the older Motorola codes (*28/*29) are required. In any event, this finally allows most roamers to get automatic call delivery in the Rhode Island system, which has been slow to get any connectivity outside of Boston and CT in recent years. Any NACN customer should now be able to receive calls in RI, use (some) features, etc. RI customers should now be able to receive calls in NY, although they will pay a $3 daily and $.99 per minute. If you are a RI customer, and roam into NY a good deal, get Boston account, which offers no daily roam charge, and 44 peak/29 off-peak. You still have to pay Boston's outrageous home airtime for call-delivery though. Maybe just get a NYNEX account instead and be done with all these silly charges from Metro Mobile and Cell One/Boston, both of whom seem to want to nickel and dime their customers as much as possible. (I still can't see how Boston customers put up with home airtime charges, plus roaming charges, plus a daily roam charge, plus a $2 Boston charge, just to receive phone calls! :( ) Note that Metro Mobile's addition and lack of some features does NOT affect Litchfield, CT, which has been on the NACN since October 1994 (or earlier), and seems to be run through CO/NY's switches. (They are both McCaw owned and have the same messages on their switch/error announcements.) Doug Reuben dreuben@interpage.net (203) 499 - 5221 Interpage Network Services -- E-Mail/Telnet to Alpha or Numeric Pagers & Fax ------------------------------ From: ai093@freenet.carleton.ca (Paul Murray) Subject: Product to Prevent PBX Phone Fraud Reply-To: ai093@freenet.carleton.ca (Paul Murray) Organization: The National Capital FreeNet Date: Tue, 31 Jan 1995 12:26:29 GMT Pat, A short while ago, I posted an item enquiring about phone fraud, extent of the problem, etc. You asked for details, in your editorial message following my posting. As I am an agent of the company which owns the technology, I wanted to get their OK before releasing information. They have given that OK. Here is a brief summary: (note that I'm a layman and not a techie) The Call Control System CCS is a controlled access gateway which provides an additional layer of security to the fraud vulnerable components of a PBX system. By validating the call origin using the Calling Line ID (CLID) and an authorization code, the CCS limits access to the DISA ports, maintain- enance ports and voice mail systems of a PBX. The CCS is a combination of Canadian software and hardware. There are three components to the system: Call Control Manager (CCM) software; System Administration Manager (SAM) software; and Call Control Interface hardware. The intial application was developed for a long distance reseller. To date this application has not had any unauthorized access. The traffic runs over 15 million calls per month. The company that developed the system is now offering the technology to the general narketplace. Acquistion cost to users will run in the $20,000 range for the system. This is the general concept. If you would like to know more, I would be pleased to follow up. We think this product will have appeal in the US market (and anywhwere else that phone fraud is a problem) and would be pleased to have your feedback, etc ... Look forward to hearing from you (question from a nephyte Internet user - do you "hear" from someone using this medium??) Best regards, Paul Murray Targeted Communication Management, Ottawa Canada ------------------------------ From: Paul R. Baudisch Subject: Electro 95 Electronics Conference, June 21-23, Boston Date: 31 Jan 1995 22:18:32 GMT Organization: The Internet Access Company Electro '95 is a major electronics conference and exposition to be held in Boston, June 21 - 23, 1995. The show, sponsored by the IEEE in alliance with the IPC (Institute for Interconnecting and Packaging Electronic Circuits), will highlight important trends in surface mount technology and contract manufacturing. Over 8,000 attendees are expected. Marjorie Clapprood, a popular Boston talk show hostess and 1990 candidate for Lieutenant Governor of Massachusetts, will deliver the keynote address on June 21. She will speak about the business climate in the Northeast and its impact on the electronics industry. For more information, please visit our web site at: http://www.netmarquee.com/electro/electro.html or contact Kathryn Piersall at kpiersall@mfi.com. ------------------------------ End of TELECOM Digest V15 #69 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa02733; 1 Feb 95 2:54 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA24385; Tue, 31 Jan 95 22:11:48 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA24377; Tue, 31 Jan 95 22:11:46 CST Date: Tue, 31 Jan 95 22:11:46 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502010411.AA24377@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #70 TELECOM Digest Tue, 31 Jan 95 22:11:00 CST Volume 15 : Issue 70 Inside This Issue: Editor: Patrick A. Townson NYNEX Offers Unlimited Weekends (Stan Schwartz) Cellphone Car Antennas - Passive Repeaters Any Good? (Charles Beatty) SONET Telephony Engineer Needed ASAP (imi@bilbo.pic.net) Billing Data Formats LD Carriers <-> RBOCs (Antony Upward) Help Wanted With Nokia 6050 GSM Car Phone (Jurgen Morhofer) For Sale: Motorola Codex 6525 (Benoit Maneckjee) AT&T 500 Number Problems (Matthew Spaethe) AudioText Applications (Richard Cayne) Another Look at the 'Old Days' (Dale Neiburg) Test Line Directory (Steve Coleman) Re: Cellular in Israel (Steve Samler) What to Look For in Choosing an LD Carrier? (Steve Chinatti) Strange Stuff (Stan Schwartz) Looking For High-Speed Wireless Tech (Roger Bergstrom) Looking For Chip Modem V22 (perretc@eiga.unige.ch) Using a Laptop Modem With ATT Public Phones (Thomas Hinders) Planning to Start a Pager Network (Thu Ra Tin) Pac-Tel New Standard Plus Phones (Dan Srebnick) Re: Radio Station Transmission Lines (Alan Sterger) Re: Bell Atlantic ISDN, Part II (Dan Brown) Last Laugh! Career Opportunities With the RBOCs (David McCord) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Tue, 31 Jan 1995 17:37:51 EST From: Stan Schwartz Subject: NYNEX Offers Unlimited Weekends As per the ad in today's {Long Island Newsday}, this is NYNEX Cellular's current New York area promotion: One Year Contract: $29.99/month 30 minutes included (peak or off-peak) .69 peak/.45 off-peak beyond 30 minutes HERE'S THE KICKER: Free weekend calls through July. (home region) Not only is NYNEX the first in the NY Metro area to offer the unlimited weekend plans that the rest of the country offers, but their rates are lower than Cell One and their off-peak band begins at 8pm, rather than 9pm. Once again, I am forced to re-think my cellular choice! Stan ------------------------------ From: beatty@access3.digex.net (Charles Beatty) Subject: Cellphone Car Antennas - Passive Repeaters Any Good? Date: 31 Jan 1995 23:03:55 GMT Organization: Express Access Online Communications, Greenbelt, MD USA I am considering buying one of those passive repeater antennas for my car to get my portable cellphone signal out of the vehicle. You know the type, a piece inside the glass with a small horizontal antenna, no wires, about $60 from Hello Direct. Are these things any good. I use the phone in urban, suburban, and rural areas. Any comments? ------------------------------ From: imi@bilbo.pic.net (imi) Subject: SONET Telephony Engineer Needed ASAP Date: 31 Jan 1995 03:28:29 GMT Organization: imi Major project in Dallas, TX needs High Level SONET Engineer to conduct JAD sessions, Analysis and Design to assist Major LDS company. Phase I starting in Feb. - please contact us ASAP. IMI Systems, Inc. 800-828-0180 Press #3 for Dallas Office Press #113 for info pertaining to opportunities ... ------------------------------ Date: Tue, 31 Jan 1995 17:36:34 -0500 From: upward@hookup.net (Antony Upward) Subject: Billing Data Formats LD Carriers <-> RBOCs Organization: KPMG Management Consulting I am looking to understand how LD carriers pass billing data to RBOCs for inclusion on subscribers local statements. I believe there is a standard data interchange protocol between LD carriers and RBOCs for this data. Can anyone supply details of this protocol. Many thanks, Antony Upward = Voice: +1 416 691 1560 = Internet: upward@hookup.net Fax: +1 416 691 3694 = 24 Devon Road, Toronto, Ontario, Canada M4E 2J8 KPMG Management Consulting, Business Systems and Technology Suite 3300, Commerce Court West, Toronto, Ontario, Canada, M5L 1B2 Voice: +1 416 777 8791 = X.400: /C=CA/S=UPWARD/G=ANTONY/P=KPMG/A=MARK400 ------------------------------ Reply-To: morhofer@heavyfun.com Date: Tue, Jan 31 1995 12:50:36 GMT From: Jurgen.Morhofer.morhofer@heavyfun.com Subject: Help Wanted With Nokia 6050 GSM Car Phone Recently I bought a Nokia 6050 GSM car phone with built-in hands-free-kit and I experienced some trouble with my antenna. Before switching to GSM I had a NEC P3 (ETACS version; the same system that is used in UK and Austria too) with a Hands-Free-Kit and external antenna. During installation of the new Nokia phone I connected the existing antenna, that always had worked fine with my NEC P3, to it. When making phone calls everything works fine if I use the handset but in case of using the hands-free option the called or calling party on the other side hears some very loud interference-like sounds mixed together with my voice. First I thought that the hands-free section of my phone would be defect but then by case I tried to turn off my antenna leaving the antenna cable connected to my phone and surprise, surprise, everything was perfect. I called Nokia Customer service but their representitive did not understand very much about GSM phones as they are still not very popular here in Italy. For now I attached a small FM-antenna to cover the ugly knob that comes out of my trunk, but I'm afraid to burn my amplifier (8W) without a proper antenna. Who has any idea of what happened and what I should do? Please e-mail to morhofer@heavyfun.com. Thanks in advance, Jurgen ------------------------------ From: bmaneckj@random.ucs.mun.ca (Benoit Maneckjee) Subject: For Sale: Motorola Codex 6525 Date: 31 Jan 1995 17:33:16 GMT Organization: NLnet Spare Unit, Never Used. Originally purchased from Motorola Canada in 1992. SPECIFICATIONS: Modulus 18 Slot Enclosure with 1 Power Supply 6525 CPU Card (Switch) with 2 80K WAN Ports, 4 high speed ports Network Port Card w/ 6 high speed ports PAD port card with 6 19.2K ports V 2.10 SW dor 6525 6500 SN?SDLC Firmware (applies to all high speed ports) Complete with all documentation & original invoices Frame relay ready with firmware upgrade Willing to part with entire unit or spare parts. Am willing to trade for a router or Unix Workstation. Originally paid CDN $17,000 wholesale from Motorola; will part with it for much less - need cash. Please EMAIL serious enquires only to: bmaneckj@random.ucs.mun.ca Benoit Maneckjee President, SiNET Corporation ------------------------------ From: mspaethe@umr.edu (Matthew Spaethe) Subject: AT&T 500 Number Problems Date: 31 Jan 1995 23:50:10 GMT Organization: UMR My 500 number isn't scheduled to be ready until Feb 3, but I've been trying it pretty much everyday. Well, AT&T completed the call today (the local switch has been accepting 1-500-367-XXXX for sometime) and the only billing option was calling card. Well, I tried that, and someone other than me answered the phone. I have no idea who it was, but I guess I'll have the number when I receive my calling card bill! Matt :) [TELECOM Digest Editor's Note: Well, you have gotten a lot further with it than I have here. My 500 number was supposed to be turned on yesterday, January 30. Still no go as of Tuesday evening, January 31. The AT&T rep suggested calling the Illinois Commerce Commission and asking them to ask Ameritech to unblock 500. A call to the ICC got me the response that 'so far as they knew' (the ICC), there was nothing yet tariffed for 500 here. AT&T said try using it via 800-225-5288 (CALL-ATT), but guess what? That didn't work either. Since my long distance service is defaulted to AT&T I tried double zero, and ask the operator to get it for me. After asking someone what to do, she tried dialing it and it went nowhere. She said it was 'blocked' in her computer and would not 'leave'. I am sure the AT&T billing department is more effecient and that I will be billed for this month anyway, just as I was for last month. :( PAT] ------------------------------ From: r_cayne@pavo.concordia.ca (Richard Cayne) Subject: AudioText Applications Date: 31 Jan 1995 09:23 -0500 Organization: Concordia University Please send details on audiotext applications currently in use by retailers to better serve their clients. Am interested in contacting these organizations to explore how effective are their systems. Regards, Richard email address: r_cayne@pavo.concordia.ca Tel: (514) 488 7110 Fax: (514) 488 1629 ------------------------------ Date: Tue, 31 Jan 1995 13:12:34 EST From: DNEIBURG@npr.org Subject: Another Look at the 'Old Days' In TELECOM Digest, v15/58, the Moderator wrote: > When I was in high school, 1956-60, the school gave us the 'option' > of using ball-point pens instead of fountain pens, although the latter > were preferred. In my high school days (1959-63), ball-point pens were also allowed, fountain pens preferred. Curiously, during my later university years I first encountered some classes where fountain pens were required for exams. > large city where television stations could be received. A few people > had television sets as early as 1946-47. Our family got one in 1949; > it had a two or three inch screen that was totally round with a very > large magnifying glass attachment which hooked on the front of it. It Our first set was a '46 model, as I recall. It was an RCA with a screen about eight inches diagonal, in a cabinet about three feet long, a foot and a half deep, and about the same height. If memory serves, it weighed about 100 pounds -- but by the standard of the time, RCA called it a "portable". It was one of very few sets I've ever seen with channel 1 on the tuner. That channel space (44-50 MHz) was originally intended for low-power stations to serve smaller towns, but was quickly taken away for FM broadcasting, which was then moved to 88-108 MHz. > Five digit numbers were common in communities which had automatic dialing > systems in those days but only one exchange in the community. Since the > exchange name was always the same, it was assumed when dialing. In your When we moved to a new house in Washington, DC, in 1953, we still had a six-digit number (actually 2 letters/4 digits: KEllogg 1528), but very soon after it received an extra digit and became KE7-1528. Ten years later, my parents retired and moved to a little town in the western "corner" of South Carolina. They had a modern seven-digit number (646-nnnn, previously released as MIlton 6-nnnn: I have no idea who "Milton" was), but since the entire town was on the same exchange, only four digits needed to be dialed to reach anyone else in town. I don't believe seven-digit local dialing became mandatory until about 1970. Dale Neiburg, STC National Public Radio Phone: 202-414-2640 635 Massachusetts Ave., N.W. Washington, D.C. 20001 Internet: dneiburg@npr.org [TELECOM Digest Editor's Note: Channel 1 was gone from television sets by around 1949-50 I guess. There is a national organization which provides educational (but some say infomercial) television to school students on closed circuit called 'Channel One'; you may have heard of them. I have a General Electric portable color television which still goes up all the way to Channel 83; so you can guess how old it is. Most folks are unaware there is a HUGE gap in the frequency spectrum for television between Channels 6 and 7. Where Channel 6 ends at about 88 megs, Channel 7 does not start until about 175 megs, way up in VHF. About thirty years ago when FM radios were still sort of new (they had been around for twenty years, but not for over fifty years like now) a religious station called WYCA went on the air in Hammond, Indiana, around 88-90 megs someplace. We have discussed *them* here in the past, a few years ago when thier station was the cause of many complaints to the FCC. In those days, around 1962-63 they had the nerve to tell people, 'if you do not have an FM receiver, you can still listen to the Word of God daily on this station by putting your television set on Channel 6 then moving the fine tuning dial until you hear our signal.' How's that for brass? By the way, 'Milton' was Milton Berle, one of the first people to appear on your 1946 television set. PAT] ------------------------------ From: stevecoleman@delphi.com (Steve Coleman) Subject: Test Line Directory Date: 31 Jan 1995 20:39:21 GMT Organization: Delphi Internet Services Corporation Does anybody know of an FTP site where a list of test lines can obtained? I am looking specfically for 102 type test lines by NPA-NXX. I know that Pacbell and GTE in Southern California use NPA-NXX-0002 as a standard for the 102 test. In Northern California Pacbell uses NPA-NXX-0020 for the most part. USWest also uses the NPA-NXX-0020 format in most parts of Oregon and Washington. If anybody knows a standard format for other regions, I would also appreciate that information if the test line directory is not available. Thanks in advance, Steve Coleman stevecoleman@delphi.com ------------------------------ Date: Tue, 31 Jan 1995 14:44:59 EST From: Steve Samler Subject: Re: Cellular in Israel Celcomm is in NYC; their fax is 212 752 1157. The international division of SWBell is in the UK. I have a phone number 44 483 751 756. By the way, SWBell has most of their headquarters in San Antonio now. Most everybody who was in St. Louis is now there. ------------------------------ From: chinatti@SRTC.COM (Steve Chinatti) Date: Tue, 31 Jan 1995 10:43:24 -0500 Subject: What to Look For in Choosing an LD Carrier? Well, I've been following this and some of the other related newsgroups for a while, and I've finally decided to try to pick a good LD carrier to cut down on my LD bills. I use about $60+/mo. in LD for one residential line, so I don't expect any earth shattering savings, but I figure that I shouldn't pay any more than I have to. I know from reading articles here that I can do much better than the big three, and I realize that I'll have to do a little leg work for this. The big problem is that I'm not sure exactly what I should be looking for, specifically what questions to ask and what pitfalls I should look out for. I've heard of LD resellers, six second increment billing; are there any other important issues? Should I be concerned with who the resellers are reselling from? Is there a good starting point for finding LD carriers that don't advertise much (my Yellow Pages lists only two companies in the Long Distance heading)? How about LD calls not carried by my LD carrier (i.e. in my area code, covered by Bell Atlantic)? Is there anything that I'm not asking that I should be? Also, I'll be adding a cellular phone soon, and is there any way that I can get a better rate by virtue of having two accounts with an LD carrier? Thanks in advance for any information that anyone can provide. Steve Chinatti [TELECOM Digest Editor's Note: I would refer your questions to that genius Marilyn Von Savant -- the smartest person in the world with an extremely high IQ whose column appears each week in {Parade Magazine} -- but the last time someone asked her the same question you are asking here, namely which long distance company to pick, she admitted that even she was unable to answer that one. Put the names of several carriers in a hat. Close your eyes, reach in and pick one. Live with it for a few months, then try one of the others. PAT] ------------------------------ From: stans@panix.com (Stan Schwartz) Subject: Strange Stuff Date: 31 Jan 1995 14:58:31 -0500 Organization: PANIX Public Access Internet and Unix, NYC I was driving home last night and saw this sign on a bar: "Tonight: Live music with 'Star 69'" I wonder if any other CLASS service has its own band. Stan ------------------------------ From: roger.bergstrom@lkab.se Subject: Looking For High-Speed Wireless Tech Date: Tue, 31 Jan 95 16:02:29 PDT Organization: Unisource Business Networks Sweden AB LKAB, a northern Swedish mining company, is planning to use remotely operated loaders in the production levels of the underground iron mine in Kiruna. The loaders will be fully automated and operated and monitored by operators above ground. Each loader will be equipped with up to 4 CCD-cameras. For the moment we are investigating the possibilities to transfer data from and to the remote machines. Since the loaders are mobile we've considered some kind of some broad-band wire-less technology (spread-spectrum). The data transfer is divided into three categories, the transfer of digitalized video signals the transfer of status information from the loader and the transfer of steering information from the operator to the loader. Anybody out there heard of: - the possibility for high-speed wireless transmission of data and video? - any suppliers of such a system? - any similar works or studies? - conferenses? Please mail any information to roger.bergstrom@lkab.se. ------------------------------ From: perretc@eiga.unige.ch Subject: Looking For Chip Modem V22 Organization: E.I.G Date: Tue, 31 Jan 1995 01:37:38 GMT Hello, I'm looking for a modem chip who can do V22 and his alimentation (power) have to be 3.3 Volt. Thanks if you can E-mail me the answer. Perretc@eig.unige.ch Perret Cedric. ------------------------------ Date: 31 Jan 1995 21:43:21 EDT Reply-To: THINDER@SOFTSW.SSW.COM From: Hinders, Thomas Subject: Using a Laptop Modem With ATT Public Phones The instruction for using the Data Port on the ATT Public phones are confusing (dialing the line waiting for the modem to answer). Why can't you dial-through? Thanks in advance ... reply directly and I'll summarize and re-post. Tom Hinders thinder@ssw.com Lotus Dev ------------------------------ From: thura@crl.com (Thu Ra Tin) Subject: Planning to Start a Pager Network Date: 31 Jan 1995 18:45:45 -0800 Organization: CRL Dialup Internet Access (415) 705-6060 [Login: guest] I have been contacted by a brother-in-law of the Deputy Trade Minister from a southeast Asian country about setting up a pager network in the country. The country has been closed for the last 30 years, and about four years ago, they opened up as a market oriented economy. Currently, there are no pager services there. I need to find a company that can set up the whole turnkey pager systems for a country. If anybody on here is interested, please contact me as soon as possible. My E-Mail address is or my phone number is (415) 552-4653. Sincerely, Thu Ra ------------------------------ From: dan.srebnick@islenet.com Organization: Isle-Net (908) 495-6996 Date: Tue, 31 Jan 95 13:53:18 -0500 Subject: Pac-Tel New Standard Plus Phones I'm the owner of a couple of Pacific Telesis (Pac Tel) "New Standard Plus 2-Line" phones. They appear to have been manufactured in Hong Kong by TeleQuest in 1984. I require a replacement receiver for one unit. I cannot seem to locate anyone in either firm who can refer me to a parts department. The service center phone number in the manual was changed long ago. Does anyone here know how I may obtain a replacement receiver for this unit? ------------------------------ From: sterger@PrimeNet.Com (Alan Sterger) Subject: Re: Radio Station Transmission Lines Date: 31 Jan 1995 05:43:30 GMT Organization: Primenet In article , Daniel Ritsma says: > I am working for a small radio station that is now using two 8kHz > lines to feed four tansmitters (AM). On one line we feed three > transmitters since they are for buildings next to each other; the other > line is for a building some 150 blocks from here. Are STLs out of the question? Regards, Alan Sterger sterger@primenet.com 75210.1022@compuserve.com ------------------------------ From: brown@eff.org (Dan Brown) Subject: Re: Bell Atlantic ISDN, Part II Date: 31 Jan 1995 17:02:43 -0500 Organization: Subversive Student Publications un-inc. In an earlier posting Hersh Jeff writes: > In TELECOM Digest V15 #63 I wrote: >> My office (located in Eatontown, NJ, area code 908) recently had two ISDN >> lines installed for experimental purposes. We receive our ISDN from a >> #5ESS. It was obvious, despite what is written about Bell Atlantic in >> "Reengineering the Corporation," that it is very inexperienced and >> unorganized in providing ISDN service. All we asked for was two ISDN >> BRI lines with NT-1s. It took about two months before we were able to >> get the lines installed, and we have already had to replace the NT-1s >> once. Anyone else have experience with Bell Atlantic ISDN? EFF has actually had decent luck with ISDN service from Bell Atlantic, though, it hasn't been particularly high volume. We've had a line for occasional use with our Picture-tel system. We are in Downtown DC. When the line was originally installed, we had it installed and usable in about the same ammount of time as we would have had a normal telephone line. No complaints. We did have some trouble (seems like one of the B channels was down) but were able to get service for it on a Saturday afternoon. We recently moved, and, again, the install went off as planned, no troubles. We're not probably more than a few blocks from a CO ... so YMMV accordingly. I do have a few gripes on other services from Bell Atlantic, such as our RCF which has been up and down (currently down, supposed to be up tomorrow AM) a couple times ... first time maybe because of paperwork shuffle, this time because they are moving over to a "new and enhanced digital switching center" at the downtown CO where our old lines (202-347-xxxx) go/went into. Later, Dan (Dan Brown brown@eff.org) ------------------------------ Date: Tue, 31 Jan 1995 11:27:13 -0800 From: david_mccord@ins.com (David McCord) Subject: Last Laugh! Career Opportunities With the RBOCs? Passed along FYI (For Your Insomnia?) ..... From: "Mark D. Baushke" From: fred@cisco.com (Fred Baker) Subject: Human Intrusion found on com-priv... At a symposium at MIT earlier this year, a representative of the Communications Workers of America (CWA) began a presentation bemoaning the loss of union craft jobs among telcos by drawing on the chalkboard a sketch representing the telco C.O. of the future: +--------------------------------------------------+ | *** | | (o o) +-----------+ | | ~ | ( ) ( ) | | | /-+-\ | | | | / | \ | | | | o | o @@\ / | ( ) | | | / \ ++ \=======/ | | | | / \ /\ /\ | | | | / \ / \ / \ | | | | == == = = = = +-----------+ | +--------------------------------------------------+ In this picture, there is a single man, a dog and a computer. The man's job is to feed the dog and the dog's job is to bite the man if he touches the computer. david_mccord@ins.com Network Wizardry International Network Services + 1 415 254 4229 voice on demand Mountain View, California, USA + 1 415 967 3247 fax Thank you Sensei!!! ------------------------------ End of TELECOM Digest V15 #70 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa04212; 1 Feb 95 4:12 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA26827; Tue, 31 Jan 95 23:39:17 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA26821; Tue, 31 Jan 95 23:39:14 CST Date: Tue, 31 Jan 95 23:39:14 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502010539.AA26821@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #71 TELECOM Digest Tue, 31 Jan 95 23:39:00 CST Volume 15 : Issue 71 Inside This Issue: Editor: Patrick A. Townson Earthquake in Area 206 (Ry Jones) Cellular Telephones Built Into Watches (Timothy Benson) Re: LD Termination Fees to RBOCs (amer310@aol.com) Re: LD Termination Fees to RBOCs (Judith Oppenheimer) Re: Cellular Fraud: How Much of it is Real Money? (Matthew P. Downs) Re: Cellular Fraud: How Much of it is Real Money? (Nick Sayer) Re: North Korea Holds US Representative Over $10K Phone Bill (Ben Combee) Re: Five Digit Phone Numbers (John Lundgren) Re: Five Digit Phone Numbers (Wes Leatherock) Re: Old Phone Number Format Question (Tony Harminc) Re: Privately Owned Cables on Public Utility Poles (John Lundgren) Re: Privately Owned Cables on Public Utility Poles (Patton M. Turner) Re: 500 Numbers and CID (John Lundgren) Last Laugh! Telecom and Pasta (Paul A. Migliorelli) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: rjones@halcyon.halcyon.com (Ry Jones) Subject: Earthquake in Area 206 Date: 31 Jan 1995 03:21:12 GMT Organization: NW NEXUS, Inc. -- Internet Made Easy (206) 455-3505 Two days ago a small tremor hit NPA 206. I called someone on the other side of Lake Washington on my cell because the land lines were overloaded. I kept the phone off the hook for about ten seconds after I had already connected on the cellular and finally got a dialtone. Maybe Mt Rainier blew? :) Interesting that in the few seconds after the tremor enough people were already on the phone to overload it. rjones@halcyon.com net. ------------------------------ Date: Tue, 31 Jan 1995 10:58:03 EST From: Timothy Benson Subject: Cellular Telephones Built Into Watches I am a MBA student and I am currently doing market research on the combination cellular telephone-wristwatch product. Does your company offer this product or something that would be considered a competitor to this product? Do you know where I might obtain some information about a product like this? Your assistance is appreciated. Tim ------------------------------ From: amer310@aol.com (Amer310) Subject: Re: LD Termination Fees to RBOCs Date: 31 Jan 1995 20:50:53 -0500 Organization: America Online, Inc. (1-800-827-6364) Reply-To: amer310@aol.com (Amer310) Regarding Access Charges, I own a small long distance company so I have to be somewhat of an expert. We pay roughly 50% of gross revenue for access charges. The amounts range from 1.7 to 8 cents per minute on each end of the call. Each Bell company or independent has different pricing for in state and out of state calls. There is also a differnce in some states for originating vs terminating calls. There is no such thing a free access period! Let me know if you have any other questions. Jeff ------------------------------ From: Judith Oppenheimer Date: Tue, 31 Jan 1995 10:25:43 -0500 Subject: Re: LD Termination Fees to RBOCs David Lewis of AT&T wrote: > Is it just me, or do these numbers (which I'll take on faith for > now) demonstrate a massive inefficiency and misallocation of costs in > the current cost structure of telecommunications? > If 95% of traffic is local (I'll define as "intraLATA"), Then 95% of > costs (fixed and variable) are due to local traffic. But the majority > (say, 80%) of LEC revenue is from access charges. Therefore 80% of > revenue is paying for 5% of cost, and 20% of revenue is paying for 95% > of cost. > Does this make sense? Local should be charged higher because it is expensive. You provide unlimited free calling for a flat fee instead of charging on a call by call basis. Of course you lose money. Local access charges are profitable, and are on a call by call basis. LEC's don't want to lose that revenue. With bypass and local exchange competition it could be tough. Remember the costs associated with access. A LD call is dialed (say international), the local switch has to do all the work to validate the number and then pass it off to the pick. The pick "just routes" a number. (oversimplification.) But the LEC doesn't get paid for all the incomplete calls, all the dial back calls, etc and that costs money. So local service pays for itself (barely) and profit comes from access charges which is also an expensive proposition. (Some local companies, especally rural, don't even handle long distance. They just pass it off to someone else to do.) There is verification, routing and don't forget billing to do. It is expensive. Judith Oppenheimer ------------------------------ From: mpd@adc.com (Matthew P. Downs) Subject: Re: Cellular Fraud: How Much of it is Real Money? Date: 31 Jan 1995 13:38:12 GMT Organization: ADC Telecommunications I don't understand the difference ... it's all real money ... instead of being able to lower my rates, they have to increase them in order to purchase more switching capacity, pay more in employee wages to track the fraud, buy more computers in order to analyze all calls that are occurring, etc. When does this become "unreal money"? If my monthly minimum could have been $9 instead of $20, that sure the hell is real money to me ... maybe not to the cellular company, but to me it is. $.02 Matt ------------------------------ From: nsayer@quack.kfu.com (Nick Sayer) Subject: Re: Cellular Fraud: How Much of it is Real Money? Organization: The Duck Pond public unix: +1 408 249 9630, log in as 'guest'. Date: 31 Jan 1995 06:53:43 UTC Barry Margolin writes: > So if fraudulent calls increase the load on the network, the carrier > will have to increase the capacity to accomodate it. Can anyone actually document a case where a carrier of _any_ sort, be it cellular, local, long distance, or _airline_ for that matter has actually had to increase capacity because of said fraudulent use? Anyone? > This costs money, but because the calls are fraudulent there's no > corresponding income to pay for it. This is precisely the same as any > other kind of theft: the vendor fails to receive income when someone > gets something that the vendor paid for. That's as may be, but that conclusion proceeds from a rather tall assumption. Nick Sayer N6QQQ @ N0ARY.#NOCAL.CA.USA.NOAM +1 408 249 9630, log in as 'guest' URL: http://www.kfu.com/~nsayer/ ------------------------------ From: combee@prism.gatech.edu (Benjamin L. Combee) Subject: Re: North Korea Holds US Representative Over $10K Phone Bill Date: 31 Jan 1995 06:42:03 -0500 Organization: ROASF Atlanta Reply-To: combee@prism.gatech.edu In article , Alan Shen wrote: > On Thu, 19 Jan 1995, Paul Robinson wrote: >> In Jack Anderson's column today, he reports that when Representative >> Bill Richardson (D-New Mexico) tried to cross the DMZ (Demilitarized Zone) >> between North and South Korea, with the casket carrying the remains of >> Chief Warrant Officer David Hilemon, North Korean officials refused to let >> him cross until the bill was paid. > Why didn't they just bring a satellite phone with him? Or was he out > of range? $10K for 23 calls ... is a LITTLE too much for me ... Apparently, the State Department didn't want to include North Korea in their Friends & Family calling circle. :) #define NAME "Ben Combee" #define E-MAIL "combee@prism.gatech.edu" #define URL "http://www.gatech.edu/acm/combee.html" ------------------------------ From: jlundgre@kn.PacBell.COM (John Lundgren) Subject: Re: Five Digit Phone Numbers Date: 31 Jan 1995 04:57:17 GMT Organization: Pacific Bell Knowledge Network Carl Moore (cmoore@ARL.MIL) wrote: > I am originallly from Wilmington, Delaware. For many years, what > became the {News-Journal} newspapers were on what became 302-654-5351. > (Please don't call that number; it was changed long ago!) Originally > (and I had to read about this since I am too young to remember that > far back) it would have been printed as "Wilmington 4-5351" or simply > "4-5351" with Wilmington being understood; I believe you had to ask > the operator if you wanted to reach such a number. "Wilmington" was > replaced by "OLympia" (OL for short) when it came time for customers > to be able to dial directly. Then, in 1966, Diamond State Telephone > stopped printing exchange names in the Wilmington phone book, and > existing numbers of form OLx-xxxx began to be printed as 65x-xxxx. I have several wooden coat hangers that I inherited with four or five digit numbers of the dry cleaners on them, probably from back in the 50's. Then later, all the phone numbers were five digits preceded with NEwmark as the word. Now they are just 63x-xxxx. > TELECOM Digest Editor's Note: > Does anyone remember when all the military bases around the USA had > their own special arrangements? Camp McCoy in Wisconsin, for example, > was just 'Camp McCoy' to the long distance operator; it had four digit > extensions but no actual 'main listed number'. It was just 'Camp McCoy, > extension xxxx' via the long distance operator. Ditto Fort Benjamin > Harrison in southern Indiana and Great Lakes Naval Base. PAT] I worked on a switchboard when I was in Gernmany, and I remember the Autovon lines that we had. I don't know why, but they were always low in volume. They worked but everyone had to yell in the field phones to get thru. Maybe that's why they were so weak: because the phones were field phones. We had phantom lines that were weak, but some were better than the Autovon lines. Then there were the lines that were on the microwaves from missile site to missile site. They were always hollow sounding or singing. I'm glad that things are a lot better nowadays. I really hated getting stuck with that stupid copperweld steel field phone wire. John Lundgren - Elec Tech - Info Tech Svcs Rancho Santiago Community College District 17th St. at Bristol \ Santa Ana, CA 92706 jlundgre@pop.rancho.cc.ca.us\jlundgre@kn.pacbell.com ------------------------------ From: wes.leatherock@oubbs.telecom.uoknor.edu Date: Tue, 31 Jan 95 07:45:40 GMT Subject: Re: Five Digit Phone Numbers Quoting Carl Moore : > I am originallly from Wilmington, Delaware. For many years, what > became the {News-Journal} newspapers were on what became > 302-654-5351. (Please don't call that number; it was changed long > ago!) Originally (and I had to read about this since I am too > young to remember that far back) it would have been printed as > "Wilmington 4-5351" or simply "4-5351" with Wilmington being > understood; I believe you had to ask the operator if you wanted > to reach such a number. Five-digit numbers were once quite common for dial service in all but very large cities. It wasn't that "Wilmington" was understood; that was the whole telephone number, and it was in Wilmington. Since there all dialing was local, the concept of a name or prefix didn't exist. For long distance calls, you reached a long distance operator, told her what city and what number you wanted, and she plugged into either a ringdown or straightforward trunk to the inward operator in that city, rang on it, if was a ringdown trunk, and passed the number to the inward operator by voice when she answered. The inward operator dialed the number (typically with a rotary dial on the keyshelf) to connect with the desired number. (If there were no direct trunks to the called city, the operator had to go through other cities on the way to get there; routes to popular destinations were on a keyshelf bulletin; if not there, she connected to a rate and route operator and inquired as to the route.) > Does anyone remember when all the military bases around the USA > had their own special arrangements? Camp McCoy in Wisconsin, for > example, was just 'Camp McCoy' to the long distance operator; it > had four digit extensions but no actual 'main listed number'. It > was just 'Camp McCoy, extension xxxx' via the long distance > operator. Ditto Fort Benjamin Harrison in southern Indiana and > Great Lakes Naval Base. PAT] The military bases were probably classified as exchanges for toll purposes and so you reached them over a toll trunk, same as a long distance call to any other exchange. Military bases always had special arrangements for connecting to both the exchange and toll network and had their own operators (and switches, where the military post had dial service). But talk of the newspaper in Wilmington and unusual arrangements reminds me of the time when I was working for The Daily Oklahoman in Oklahoma City (2-1211 and also L.D. 343; do you remember toll terminals?) and I had occasion to call Phillips, Texas, about a fire. Phillips was a company town of a Phillips Petroleum Company subsidiary near Borger, Texas, where they had one or more chemical plants. I had the number in Phillips and I placed a call with the long distance operator. She went to rate and route (see above) who gave her the routing of "TC Borger" (toll center Borger). So she connected with Borger and asked for Phillips. The inward operator responded "your ticket reads Borger 666, a PBX." So this was a case where it really was a PBX with extension numbers. This was probably around 1949 or 1950. Wes Leatherock wes.leatherock@oubbs.telecom.uoknor.edu wes.leatherock@f2001.n147.z1.fidonet.org [TELECOM Digest Editor's Note: This reminds me of when the operator in North Bay, Ontario was the inward operator for all the little towns northward along Imperial Highway 11, clear up to Hearst. When you called any of those points, the long distance operator always got a report from Rate and Route which indicated North Bay. So your operator dialed something and presently there came a response over the wire "North Bay!" and your operator would ask for the number in Hearst, for example, but the other end would say 'just a minute, I will ring the operator in Hearst for you and you give her the number you want.' You'd hear this 'kerchunk' sound as she was ringing, and sooner or later "Hearst" came on the line to ask for 'number please?'. That is, unless you called after about 10 pm at night ... call that late, and North Bay had a different answer for your operator, who seemed astounded to hear such a thing: "Is this an emergency call to Hearst, Ontario?" (your operator would repeat the question to you, and you would say no.) "Well operator, we are not supposed to ring her after ten o'clock at night unless its an emergency. She goes to bed at ten. If it's an emergency I will ring her, but we are not supposed to call until after seven in the morning. Seven is when we give her a wake up call." Then there was Alma, Quebec. Alma served as the inward for several places in the far northern reaches of Quebec but connections were made over *AM radio links*. Rate and Route would give your local operator the notation 'other place' to mark on the ticket and a number to dial which reached Alma Inward. If your operator thought it strange that the 'phone company' in Hearst closed down overnight, she thought it even stranger when the operator in Alma answered, always first in French then immediatly in English saying 'Alma Radio'. Your operator would ask for one of those places and the Alma operator would answer almost indignantly: "oooh! madamoiselle! They are not going to answer me now! They only promise to listen to zee radio between seven and nine oclock. Do you want me to try anyway? Maybe they will answer." So giving it a try, she would go on the radio circuit from her switchboard and with sometimes horrible static in the background when she was not transmitting, she would try to raise them. First in French then in English over and over, four or five times calling for whatever small village it was 'this is Alma on Channel 1, do you copy me'. Then she would go try on Channel 2. Finally she would say there was no response from them, and almost as an afterthought, 'madamoiselle, where are you calling from?' The operator would tell her she was in Chicago. "Shee cah go? In zee United States? Operator, you call me back at seven o'clock, I will see that they talk to you then." Long ago times, indeed. That would have been in the middle 1950's. PAT] ------------------------------ Date: Tue, 31 Jan 95 15:40:17 EST From: Tony Harminc Subject: Re: Old Phone Number Format Question wes.leatherock@oubbs.telecom.uoknor.edu wrote: > Philips, the Netherlands company, was not very well known in > the United States before World War II. During World War II, after the > Netherlands was occupied by Germany, their American operation became > separate under the name North American Philips Company, which used the > trade name Norelco. Just to add another piece to the puzzle: in Canada the Norelco trademark was not owned by Philips but by The Northern Electric Company Ltd., which made radios, wire and cable, telephone equipment, and even appliances like refrigerators. Northern Electric was majority owned by The Bell Telephone Company of Canada (now Bell Canada), and was renamed Northern Telecom in the mid 1970s. It is now best known for its DMS switches and related telecom equipment. In Canada, the Philips electric razors and such are sold under the Philishave name. Tony Harminc ------------------------------ From: jlundgre@kn.PacBell.COM (John Lundgren) Subject: Re: Privately Owned Cables on Public Utility Poles Date: 1 Feb 1995 03:04:52 GMT Organization: Pacific Bell Knowledge Network Mark Fletcher (mfletch@ix.netcom.com) wrote: > I am the Communications Manager at a large Northeastern resort where > my department maintains a Northern Telcom Meridian Option 71 with two > Meridian Option 11's in remote sites. Here is my dilemma: > Currently we lease about 100 pairs from the local RBOC at a cost of > $15.50 each per month. These lines service locations about two miles > apart down a State Highway, all in one municipality, and are used to > connect the remote sitches. > I have been told that we can apply to the local municipality for a > utility franchise, and then place our own cables on existing poles. At > our current cost of $18,000.00 annually for special circuits, this > possibility is very attractive to us. > If anyone has information about the process, or could point me to any > pertinant legal documents on the subject, I would be very grateful. > Please reply via direct e-mail to mfletch@ix.netcom.com. I will post my > findings and a summary for all interested. It sounds like you have a good idea, if what you need is 100 pairs of hard copper. Check the numbers and see how the costs look for a period of time, and you might be saving a lot real quick. If you can use some groups of 24 circuits, then T-1 gear could be another answer to saving some money. Or instead of running your own cable, you could run fiber instead. Or radio gear could also eliminate the dependence on the telco altogether. I would get one of the above and implement it, and not go completely independent of the telco until I was sure that the fiber or radio was going to be a reliable substitute. Maybe keep 1/3 of the telco lines just in case. John Lundgren - Elec Tech - Info Tech Svcs Rancho Santiago Community College District 17th St. at Bristol \ Santa Ana, CA 92706 jlundgre@pop.rancho.cc.ca.us\jlundgre@kn.pacbell.com ------------------------------ From: pturner@netcom.com (Patton M Turner) Subject: Re: Privately Owned Cables on Public Utility Poles Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Tue, 31 Jan 1995 03:17:26 GMT You can rent space on the poles under conditions imposed by the PUC and or City. Usually the telco owns the poles, telco pays something like 40 % of cost and the CATV firms 10%. You only need a few inches of space on the pole, but remember to consider maintainance costs and restoration if the pole gets knocked down. Also as a non-common carrier you won't get the cooperation the telco gets if you have inductive noise problems. Have you thought of T1s or mucrowave? Patton Turner KB4GRZ pturner@netcom.com FAA Telecommunications ------------------------------ From: jlundgre@kn.PacBell.COM (John Lundgren) Subject: Re: 500 Numbers and CID Date: 31 Jan 1995 04:42:44 GMT Organization: Pacific Bell Knowledge Network Mark Stieger (stud@subzero.winternet.com) wrote: > Here's something I haven't seen asked in here. When nationwide Caller > ID is available, and someone calls you through a 500 number, will > their CID information be passed, or will the 500 number (or some ATT > number show up? > [TELECOM Digest Editor's Note: I don't know, and let's talk about it [deleted] > gets installed here. Meanwhile of course, AT&T promptly billed me for > the service on January 24 -- on my local Ameritech bill -- so much for > how it is out of their control until Ameritech cooperates. PAT] I think here in Pac*Bell land, the Calif PUC requires that if the subscriber had a loss of service greater than 24 hours, they can remove the loss from their bill. Like if the phone is out two days, they can subtract 2/30 of a month's bill. Of course, that doesn't include other charges like toll calls. So if you get service on the 30th, you might be able to get away without paying the loss between the 24th and 30th. I'm assuming that the regulatory laws are somewhat uniform from state to state. John Lundgren - Elec Tech - Info Tech Svcs Rancho Santiago Community College District 17th St. at Bristol \ Santa Ana, CA 92706 jlundgre@pop.rancho.cc.ca.us\jlundgre@kn.pacbell.com ------------------------------ Date: Tue, 31 Jan 1995 09:16:05 EST From: Paul A. Migliorelli Subject: Last Laugh! Telecom and Pasta Have any of you heard the Kraft macaroni and cheese ad with the little child singing that he "wants the blue box", and that he has the "blue box blues"? Most interesting indeed. ------------------------------ End of TELECOM Digest V15 #71 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa02347; 2 Feb 95 21:54 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA16185; Thu, 2 Feb 95 16:45:19 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA16177; Thu, 2 Feb 95 16:45:17 CST Date: Thu, 2 Feb 95 16:45:17 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502022245.AA16177@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #72 TELECOM Digest Thu, 2 Feb 95 16:45:00 CST Volume 15 : Issue 72 Inside This Issue: Editor: Patrick A. Townson Book Review: "Protect Your Privacy" by Stallings (Rob Slade) International Alliance Service Liability (David Ujimoto) CFP: 3rd International Workshop on Feature Interactions (Nancy Griffeth) Canadian (Northern Tel) in India? (Rohit Sharma) Adoption of New Technologies (Seth Baum) NYNEX's Competition in the NY Metro LATA (Stan Schwartz) Atlanta Toll-Free Calling Zone Growing? (Paul Beker) Who Are the Telephone Pioneers of America? (Jonathan Prince) Cellphones on Your TV (Timothy D. Shoppa) Infrastructure for Internet Service Provider (Rustom Vachha) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Thu, 02 Feb 1995 12:47:47 EST From: Rob Slade Subject: Book Review: "Protect Your Privacy" by Stallings [It didn't start out this way, but this seems to be the start of a "mini" series of reviews on the topic of PGP. Garfinkel's review is due to be sent in another two weeks, Schneier's a week after that; Peachpit has one due out in February while Zimmerman's own, I found out yesterday, is due out in April. - rms] BKPRTPRV.RVW 941214 "Protect Your Privacy", Stallings, 1995, 0-13-185596-4, U$19.95 %A William Stallings ws@shore.net %C 113 Sylvan Avenue, Englewood Cliffs, NJ 07632 %D 1995 %G 0-13-185596-4 %I Prentice Hall PTR %O U$19.95 (515) 284-6751 FAX (515) 284-2607 camares@mcimail.com %P 302 %T "Protect Your Privacy" This is the first-released of at least three books on PGP (Pretty Good Privacy), the encryption and authentication package by Phil Zimmerman. It covers the concepts of encryption, public key encryption, authentication and key management, as well as the installation and operation of PGP on MS-DOS and Macintosh platforms. There is also some overview of front end shells for DOS and Windows, plus helpful supplementary information on password/phrase choice key servers, and where to get PGP. (The promise of coverage for Windows, UNIX, OS/2 and Amiga in the promotional literature is overkill, but these interfaces will be almost identical to those covered.) Stallings' material is generally very clear and well written. Many times, however, concepts are introduced early in the book but not explained until much later. This is particularly true of key management. In most cases, I can assure the reader not to worry -- all will be made clear, eventually. (In some few cases, the explanation may remain confusing until you actually run the program.) The book echoes the assertion by many that PGP has become the de facto standard in Internet privacy and authentication. Certainly no commercial product has anything like the same range of use. Full acceptance of PGP, though, has been hampered by the version incompatibilities and the legal difficulties caused by the US weapons (!) expert control laws. Given the touchy nature of this subject, it is not terribly surprising that both Stallings, and Michael Johnson in the access document, comment only briefly on the subject. These passages are somewhat calming, but hardly calculated to inspire confidence. Solid background on the technology, if sometimes disjointed. Terse, but serviceable documentation on the program. Readable and informative. copyright Robert M. Slade, 1994 BKPRTPRV.RVW 941214. Permission granted for distribution in TELECOM Digest and associated publications. Vancouver ROBERTS@decus.ca Institute for Robert_Slade@sfu.ca Research into rslade@cue.bc.ca User p1@CyberStore.ca Security Canada V7K 2G6 ------------------------------ From: ab261@torfree.net (David Ujimoto) Subject: International Alliance Service Liability Organization: Toronto FreeNet Date: Wed, 1 Feb 1995 20:25:53 GMT I have a question regarding liability and international telephone carrier alliances which hopefully someone can answer. Given the development of international telecom alliances and their provision of specialized services for business, I am wondering about the extent to which telecom carriers would be liable for lost messages, contracts, product ideas and the like. [I realize that in general, telecom companies are protected from such liability and that international tariff agreements also protect carriers. But given the fact that the carriers know or ought to know the importance of these networks to business, doesn't the carriers' exposure to risk increase?] Assuming that there is carrier liability for these problems, where would such liability be prosecuted? Would it be in the originating country? The terminating country? Or where the breach occurred? Or is this question redundant because service providers expressly contract out liability? Any help that can be provided in this matter would be greatly appreciated! Thanks in advance! David Ujimoto d.ujimoto@utoronto.ca ab261@freenet.toronto.on.ca [TELECOM Digest Editor's Note: A few years ago Illinois Bell had that awful fire in Hinsdale, Illinois which knocked much of their network off line for several days and some of it was off line for almost a month. They claimed they had no liability to subscribers for lost business as a result of the outage, and for the most part they were backed up in this opinion by the court when various subscribers sued them. I think telco's contract with you -- which is the tariff -- says telco's liability is limited to the amount of money you paid for service which they were unable to provide. PAT] ------------------------------ From: nancyg@thumper.bellcore.com (Nancy Griffeth) Subject: CFP: 3rd International Workshop on Feature Interactions Organization: Morristown Research and Engineering Date: Wed, 1 Feb 1995 20:35:51 GMT Call for Participation Third International Workshop on Feature Interactions in Telecommunications Software Systems Kyoto, Japan October 11-13, 1995 Description: This workshop is the third in a series, whose mission is to encourage researchers from a variety of computer science specialties (software engineering, enterprise modeling, protocol engineering, distributed artificial intelligence, formal techniques, software testing, and distributed systems, among others) to apply their techniques to the feature interaction problem that arises in building telecommunications software systems (see the back page for a description of the problem). We welcome papers on avoiding, detecting, and/or resolving feature interactions using either analytical or structural approaches. Submissions are encouraged in (but are not limited to) the following topic areas: - Classification of feature interactions. - Modeling, reasoning, and testing techniques for detecting feature interactions. - Software platforms and architecture designs to aid in avoiding, detecting, and resolving feature interactions. - Tools and methodologies for promoting software compatibility and extensibility. - Mechanisms for managing feature interactions throughout the service life-cyle. - Management of feature interactions in PCS, ISDN, and Broadband services, as well as IN services. - Management of feature interactions in various of the operations support functions such as Service Negotiation, Service Management, and Service Assurance. - Feature Interactions and their potential impact on system Security and Safety. - Environments and automated tools for related problems in other software systems. - Management of Feature Interactions in various other enterprises, such as banking, medicine, etc. Format: We hope to promote a dialogue among researchers in various related areas, as well as the designers and builders of telecommun- ications software. To this end, the workshop will have sessions for paper presentations, including relatively long discussion periods. Panel discussions and tool demonstrations are also planned. The first day of the workshop, October 11, is devoted to tutorials and discussions on areas related to feature interactions. Attendance: Workshop attendance will be limited to 100 people. Attendance will be by invitation only. Prospective attendees are asked to submit either a paper (maximum 5000 words) or a single page description of their interests and how they relate to the workshop. Proposals for tutorials and discussions are also requested (maximum 3000 words). About 16-20 of the attendees will be asked to present talks; a small number of tutorials and/or discussions will also be selected. We will strive for an equal mix of theoretical results and practical experiences. Papers will be published in a conference proceedings. Submissions: Please send five copies of your full original paper or interest description to: Kong Eng Cheng Department of Computer Science Royal Melbourne Institute of Technology GPO Box 2476V Melbourne, Victoria AUSTRALIA 3001 E-mail: kec@cs.rmit.edu.au Tel: +61 3 660 3266 FAX: +61 3 662 1617 Important dates are: February 28, 1995: Submission of contributions. May 15, 1995: Notification of acceptance. June 26, 1995: Submission of camera-ready versions. Workshop Co-chairpersons Tadashi Ohta (ATR, Japan) Nancy Griffeth (Bellcore, USA) Program Committee Co-Chairpersons: Kong Eng Cheng (Royal Melbourne Institute of Technology, Australia) E. Jane Cameron (Bellcore, USA) Jan Bergstra (CWI and University of Amsterdam, The Netherlands) Ralph Blumenthal (Bellcore, USA) Rolv Braek (SINTEF DELAB, Norway) Bernie Cohen (City University of London, UK) Robert France (Florida Atlantic University, USA) Haruo Hasegawa (OKI, Japan) Dieter Hogrefe (University of Bern, Switzerland) Richard Kemmerer (UCSB, USA) Victor Lesser (University of Massachusetts, USA) Yow-Jian Lin (Bellcore, USA) Luigi Logrippo (University of Ottawa, Canada) Jan van der Meer (Ericsson, The Netherlands) Robert Milne (BNR, UK) Leo Motus (Tallinn Technical University, Estonia) Jacques Muller (CNET, France) Jan-Olof Nordenstam (ELLEMTEL, Sweden) Yoshihiro Niitsu (NTT, Japan) Ben Potter (University of Hertfordshire, UK) Henrikas Pranevicius (Kaunas University of Technology, Lithuania) Martin Sadler (HP, UK) Jean-Bernard Stefani (CNET, France) Greg Utas (BNR, USA) Jyri Vain (Institute of Cybernetics, Estonia) Hugo Velthuijsen (PTT Research, The Netherlands) Yasushi Wakahara (KDD R&D Laboratories, Japan) Ron Wojcik (BellSouth, USA) Pamela Zave (AT&T Bell Laboratories, USA) Workshop Statement: The feature interaction problem is a major obstacle to the rapid deployment of new telephone services. Some feature communications system. Telecommunications software is huge, real-time, and distributed; adding new features to a telecommunication system, like adding new functionalities to any large software system, can be very difficult. Each new feature may interact with many existing features, causing customer annoyance or total system breakdown. Traditionally, interactions were detected and resolved on a feature by feature basis by experts who are knowledgeable on all existing features. As the number of features grows to satisfy diverse needs of customers, managing feature interactions in a single administrative domain is approaching incomprehensible complexity. In a future marketplace where features deployed in the network may be developed by different operating companies and their associated vendors, the traditional approach is no longer feasible. How to detect, resolve, or even prevent the occurrence of feature interactions in an open network is now an important research issue. The feature interaction problem is not unique to telecommunications software; similar problems are encountered in any long-lived software system that requires frequent changes and additions to its functionality. Techniques in many related areas appear to be applicable to the management of feature interactions. Software methodologies for extensibility and compatibility, for example, could be useful for providing a structured design that can prevent many feature interactions from occurring. Features are typically design to suit the purposes of a user or business, hence Enterprise modeling will play a role in the identification of certain classes of interaction, in particular the solution of an interaction in one enterprise may not be desired by another. Formal specification, verification, and testing techniques, being widely used in protocol engineering and software engineering, contribute to the detection of interactions. Several causes of the problem, such as aliasing, timing, and the distribution of software components, are similar to issues in distributed systems. Cooperative problem solving, a promising approach for resolving interactions at run time, resembles distributed planning and resolution of conflicting subgoals among multiple agents in the area of distributed artificial intelligence. This workshop aims to provide an opportunity for participants to share ideas and experiences in their respective fields, and to apply their expertise to the feature interaction problem. Workshop Announcement: 3nd International Workshop on Feature Interactions in Telecommunications Software Systems, October 11-13, Kyoto, Japan, Sponsors: IEEE Communications Society. In cooperation with ACM SIGCOMM and ATR, Japan. Contact Tadashi Ohta, ATR, 2-2, Hikari-dai, Seika-cho, Soraku-gun, Kyoto, 619-02, Japan, Tel: +81 7749 5 1230, Fax: +81 77495 1208, e-mail: ohta@atr-sw.atr.co.jp. ------------------------------ From: sharma@ee.ualberta.ca (Rohit Sharma) Subject: Canadian (Northern Tel) in India? Date: 1 Feb 1995 20:32:32 GMT Organization: University of Alberta Electrical Engineering Department Why is it that there is virtually no Canadian telecom equipment supplier (e.g Northern Telecom) trying to market any products in India? Northern's research arm BNR recently set up a joint software venture with TCS (an Indian Software co.) to produce software for BNR's cellular research, but there is no sign of N.T. making its presence felt along with the other telecom multinationals trying to get a piece of the rapidly expanding Indian telecom market? These multinationals include Alcatel, Ericssons, Siemens, Fujitsu. rohit sharma@trlabs.ca or sharma@ee.ualberta.ca Photonics Division, Telecom Research Labs - Edmonton, Alberta. ------------------------------ From: sb@interramp.com (sb) Subject: Adoption of New Technologies Date: 1 Feb 1995 21:23:48 GMT Organization: PSI Public Usenet Link I'm writing an article on how the average consumer will react to the proliferation of possible technologies, services, and products which he/she will be exposed to in the coming years as he attempts (or is forced into entering) the onramp to the information superhighway. What's gonna work: movies on demand? Internet access? HDTV? Home shopping? Specifically, what are the demand drivers for new technology products/services, and what combination of factors makes a product/serivce suceed or fail? Do any key drivers emerge as especially important for technology products, versus say consumer durables? As background, I would appreciate mail responses to "sb@interramp.com" which yield: 1) Pointers to other articles/books that deal with this topic; 2) Knowledge of any recent papers/study; 3) Internet links that might be of use; 4) Knowledge of any experiences that any users have had; 5) Anything else that springs to your mind regarding this topic; Thank you for your time. Seth Baum sb@interramp.com ------------------------------ Date: Thu, 02 Feb 1995 03:16:23 EST From: Stan Schwartz Subject: NYNEX's Competition in the NY Metro LATA I received the new dial-in number for AOL's new AOLNet service today, which is in the 516-393 exchange. I did what I normally do when I don't recognize an exchange, which is to dial NXX-9901. In NYNEXland, this will usually tell me the name of the C/O, and I can then judge if it will REALLY be a local call. To my surprise, here's what I heard when I dialed 393-9901: "Hello, You have reached the Cablevision Lightpath 5-E switch, serving the 516-393, 439, and 465 Exchanges" Cablevision, the local cable tv operator was written up in Long Island Newsday last week as major local competition for NYNEX. While they said that Cablevision already had its own switch installed, I didn't realize that the changes were already made! Stan ------------------------------ From: pbeker@netcom.com (Paul Beker) Subject: Atlanta Toll-Free Calling Zone Growing? Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Wed, 1 Feb 1995 05:03:28 GMT I heard a very brief report on one of the local radio stations that Southern Bell was planning to increase the size of the "local Atlanta calling zone by 50%" by "adding 34 new exchanges" to it ... Of course, no further details were given, such as: will Southern Bell raise rates for everyone in Atlanta? (probably) ... where are these 34 exchanges (any 706 exchanges)? ... etc. I have a feeling that this is an effort to bring all of 404 into a single, toll-free calling zone, which it virtually is already ... there were several exchanges that were originally slated for 706 at the time of the 404 split, but were eventually brought back into 404 by public uproar. Perhaps this where the "34" figure comes from, although I didn't think there were so many. Anyone have more details? Thanks! Paul Beker - Atlanta, GA pbeker@netcom.com ------------------------------ From: Jonathan Prince Subject: Who Are the Telephone Pioneers of America? Date: Wed, 1 Feb 1995 02:16:08 EST I was at a meeting at the Ameritech HQ in Ohio the other day and I left the meeting for the rest room, and noticed that near the lobby/cafeteria there was a display of various Ameritech novelty items (T-Shirts, mugs etc and other corporate propaganda) and also in the case were a couple stickers for sale. All of these items were 'for sale' but no one around to buy from, so hence my question. I noticed a couple decals for sale that were in the shape of a triangle, wider than tall, blue with white lettering, seeming to commemorate (judging from the old style of graphics on the decal) some organization called the 'Telephone Pioneers of America' (I think that's what it was called). What is this organization, or was it, as the case might be? A boy/girl scouts for the telephone company?! Of what? As someone who has been getting a lot of hands on experience in the problems of rural internet connectivity these days (in SE Ohio for the South East Ohio Regional Free-Net) I have become fascinated with the history of the telcos, the history of the acceptance in our lives of a machine that we talk to (which in my opinion is almost as absurd as a machine that we watch for at least six hours a day!). Anyway, this looks to be an interesting bit of tele-trivia, if anyone has the answer. I didn't get the chance to ask Ameritech, I'll try to find out at the next meeting. Thanks, Jonathan Prince Rural Action - VISTA for the South East Ohio Regional Free-Net aa078@seorf.ohiou.edu [TELECOM Digest Editor's Note: I will give you the answer, and it is not 'trivia' in any sense of the word. And please don't stand up at the next meeting to ask who are the TPA, because chances are everyone in the room would be embarrassed for you. I know I would be. For your information, the Telephone Pioneers of America is an outstanding organization with chapters at telcos all over the USA in the Bell Operating Companies and at AT&T. At the non-Bell telcos, the same organization exists known as the Independent Pioneers. TPA has been around for close to a century now. In the very early days, meaning the period up to about 1930, the TPA was composed of people who had been employed by (what was then) the Bell System since its beginning. They were, in effect, the 'charter employees' of the company, or 'pioneers' in telecommunications. They were the people who started what you take for granted today. As time went on into the 1920-30's, most of those old pioneers were either dead, retired or on the verge of retiring from Bell after forty plus years of employment with AT&T. The organization then amended its charter to allow membership by any employee of AT&T or (as they were called) a subsidiary company who had been employed by Bell (or an independent) for at least twenty years. I believe that rule still is in effect, although many chapters of TPA have associate membership programs for employees with less time on the job. What do they do? What is their purpose? They are very involved citizens in their communities. In their spare time they devise solutions to the problems encountered by differently-abled (I used to say 'handicapped' but this is now a politcally correct Digest, since I want to have it distributed on several major campuses) persons. They have developed methods by which someone who was completely paralyzed could 'talk' on the phone using a pencil they held in their teeth. They have developed all sorts of gimmicks and gadgets for very limited use applications by people who for whatever reason could not otherwise use the phone. Aside from their marvelous work in specialized telecommunications applications for handicapped people, they are good citizens in their community. They assist with voter registration. They work with people who have AIDS. They take food to old people who can't get out of their houses. They record books and newspapers on tape for people who are visually handicapped. They are helping to restore telecom links in Kobe. To be honest with you, I don't know what some chapter of TPA *doesn't do*. Most of their expenses come out of their own pockets. The telcos make corp- orate contributions, and they raise money through the sale of 'corporate propoganda' such as coffee mugs an T-shirts with their employer's logo on them. There are, you see, some people around who are proud to be employed by telco and who like having artifacts of that sort in their home, etc. And that's the Telephone Pioneers of America: a splendid bunch of people with a long and positive role as leaders in telecom. PAT] ------------------------------ From: shoppa@almach.krl.caltech.edu (Timothy D. Shoppa) Subject: Cellphones on Your TV Date: 1 Feb 1995 22:41:00 PST Organization: California Institute of Technology > [TELECOM Digest Editor's Note: Channel 1 was gone from television sets by > around 1949-50 I guess. There is a national organization which provides > educational (but some say infomercial) television to school students on > closed circuit called 'Channel One'; you may have heard of them. I have > a General Electric portable color television which still goes up all the > way to Channel 83; so you can guess how old it is. Most folks are unaware ^^^^^^^^^^ > there is a HUGE gap in the frequency spectrum for television between > Channels 6 and 7. Where Channel 6 ends at about 88 megs, Channel 7 does > not start until about 175 megs, way up in VHF. About thirty years ago > when FM radios were still sort of new (they had been around for twenty > years, but not for over fifty years like now) a religious station called > WYCA went on the air in Hammond, Indiana, around 88-90 megs someplace. > We have discussed *them* here in the past, a few years ago when thier > station was the cause of many complaints to the FCC. In those days, around > 1962-63 they had the nerve to tell people, 'if you do not have an FM > receiver, you can still listen to the Word of God daily on this station > by putting your television set on Channel 6 then moving the fine tuning > dial until you hear our signal.' It is still the case that you can pick up the 88-90 MHz FM broadcasts on a TV with a good 'ol analog tuner. Similarly, you may be able to tune in many pager services and cellphone con- versations (or often, more precisely, their IF images) on the upper reaches of your old UHF TV. Here in LA the wide bandwidth of a TV tuner is a disadvantage when doing this, as many cellphone frequencies conversations fall in the bandpass at any given time. In more rural areas, this is not nearly as big of a problem. I'm waiting for the FCC/phone cops to discover this and ban the sale of older TV's at yard sales. I don't think they are currently banned, as they are not exactly "scanning receivers" -- or has the law been broadened recently? Tim Shoppa (shoppa@altair.krl.caltech.edu) [TELECOM Digest Editor's Note: Yeah, well you can't really get cell phones on your television (in the upper UHF channels now abolished) very well. The innards of the television are different as you point out. You can set the dial up there on channel 81-83 for example and twiddle the fine tuner all you want. You just get bizzarre bits and pieces of things, not even as much as you get on a scanner. I realize you were to some extent joking but I'd not get too concerned. PAT] ------------------------------ From: rvachha@PrimeNet.Com (Rustom Vachha) Subject: Infrastructure for Internet Service Provider Date: Thu, 2 Feb 1995 01:08:15 MST Organization: Primenet Hi everyone! I am currently exploring the possibility of providing internet services in the Indian subcontinent, in the near future. What sort of infrastructure is required? I presume a high speed dedicated telephone line is a requirement. Are there different types of high speed lines? And more importantly, how can I get them from the telephone company (local/long distance)? Thanks in advance, Rustom rvachha@primenet.com ------------------------------ End of TELECOM Digest V15 #72 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa02904; 2 Feb 95 22:33 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA18746; Thu, 2 Feb 95 18:11:14 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA18740; Thu, 2 Feb 95 18:11:12 CST Date: Thu, 2 Feb 95 18:11:12 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502030011.AA18740@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #73 TELECOM Digest Thu, 2 Feb 95 18:11:00 CST Volume 15 : Issue 73 Inside This Issue: Editor: Patrick A. Townson SW Bell Urged to Cut Phelps' Phone Lines (Capital-Journal via Kevyn Jacobs) Book Review: "Fundamentals of Telecommunication Networks" (Rob Slade) MCI to Launch First Nationwide Sonet/ATM Network (Jim Collins) POCSAG to Be Upgraded to APOC (John Bell) 7/8ths Heliax Sources Needed (Michael P. Deignan) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: Kevyn Jacobs Subject: SW Bell Urged to Cut Phelps' Phone Lines Date: Thu, 02 Feb 1995 07:34:33 CST From the {Topeka Capital-Journal) Topeka, Kansas Front page, Friday, January 20, 1995 S.W. BELL URGED TO CUT PHELPS' CHURCH PHONES By STEVE FRY The Capital-Journal A prominent Topeka businessman is challenging Southwestern Bell to pull the plug on telephone service to Westboro Baptist Church because of what a local lawyer calls the "defaming and harassing" faxes that emanate from there. Kent Garlinghouse chief executive officer and chairman of M-C Industries Inc., has joined with lawyer Jerry Palmer in condemning the telephone company for not acting to curb the fax messages of Westboro Baptist Church. The faxes are sprinkled with words such as "fag," "sodomite," "pig" and "whore." The pastor of Westboro Baptist is the Rev. Fred W. Phelps Sr. Its congregation is composed primarily of members of his family. The congregation is best known for its anti-gay picketing. The picketing that began on local street corners has increasingly turned up in locales across the nation, drawing widespread media attention. Garlinghouse said the picketing has become so embarrassing he is reluctant to acknowledge he is from Topeka when he meets people while out of town on business. He and Palmer contend it is Southwestern Bell's civic duty to take action against what they deem is an abuse of telephone service. "I think Southwestern Bell has been a bad corporate citizen in their failure to use the power they have to abate the serious problem this community has with these defaming and harassing faxes," Palmer said. "They're like the rest of the community. They're afraid. They don't want the litigation, the hassle" with the Westboro church, Palmer said. Many of Phelps' 13 children are lawyers. "Southwestern Bell could -- today -- shut off the fax service to Westboro Baptist Church if they had the will," Palmer said Wednesday. Anne Marie Hilday, a Southwestern Bell spokesman, said the matter boils down to a First Amendment issue. "Southwestern Bell is a good corporate citizen because its efforts are aimed at serving its customers fairly and without discriminating against any customer," she said. "However, Southwestern Bell cannot act as prosecutor, judge and jury in determining whether conversation between two persons is defamatory and libelous or otherwise illegal." Garlinghouse said he hasn't been the subject of a Westboro fax, but was cursed by a church picketer as he entered a west-side restaurant Sept. 17. There are more issues than just the church`s faxes, Garlinghouse said, including church picketers on Topeka streets, entertainers shunning Topeka and harassment of Topekans attending public performances. Palmer contends the phone company could shut off service based on a Kansas Corporation Commission regulation linked to abuse of telephone service. In that regulation, there is a section dealing with calls directly to a person that reasonably could be expected to frighten, abuse, torment or harass that person. Southwestern Bell's Hilday counters that the regulation is applied within the law. Palmer said the regulation should be extended to third parties. For example, if A sends a fax to B about Z, the regulation should protect Z, Palmer said. On Aug. 11, Palmer filed a complaint with the KCC saying existing regulations against abuse of telephone service by voice communication are inadequate to cover abusive facsimile messages about someone who doesn't actually receive the fax message. The phone company contends updating the regulation isn't needed and urged the KCC to drop its investigation. Palmer, a longtime Phelps target on picket signs and faxes, represents St. David's Episcopal Church in a civil lawsuit against Westboro. Instead of cutting off phone service, Southwestern Bell is using the criminal prosecution route, which is quicker than a civil suit or administrative action, Hilday said. Southwestern Bell can place a "trap" on a phone or fax machine to trace the number of the fax sender. After three offending calls are received, the information is turned over to law enforcement officers, who visit the sender to talk about the complaint. If the fax messages continue, officers can seek prosecution for violation of the regulation. Upon conviction, the phone company can disconnect the offender's phone service. So far, 14 customers have complained to Southwestern Bell about the Westboro church faxes, Hilday said, but none has agreed to use the trap method. The problem with the trap method is it could make the complainant a target for more fax messages, Palmer said. Even though the complainant wouldn't receive future messages about himself, many outlets for the messages would, Palmer said. By using the regulatory route, everyone benefits because Westboro fax messages would end, Palmer said. Using a trap to identify the Westboro church as the fax sender is "absurd," Palmer said. "That leaves Southwestern Bell, probably, as the only people who don't know where the faxes are coming from," he said. Westboro faxes usually have church logo at the top or are signed by Phelps, Palmer said. In October, Shawnee County District Judge Michael Barbara found Phelps in contempt of court based, in part, on a fax issued by the minister, Palmer said. It isn't clear when the KCC will complete its investigation of Palmer's complaint, said David Schlosser, KCC spokesman. Researchers are trying to determine whether other states offer third-party protection. "I think it's embarrassing," Garlinghouse said of the Westboro anti-gay campaign. "It does not make me proud to be a Topekan. It's amazing how many people around the country are familiar with the Phelpses.?' From The {Topeka Capital-Journal} Editorial Page Sunday, January 22, 1995 Phelps faxes: Bell, it's your call. Sidebar: Some believe the phone company has the capacity to pull the plug on the cult of contempt's faxes Sidebar: This is not free speech. It is high-tech harassment. It is reaching out and touching someone with defamation and mass character assassination. If you feel Southwestern Bell should stop this madness, call the company and tell it to. Southwestern Bell, you have been duly challenged. It's your call now. Several knowledgeable Topekans believe you have the power, the right and, indeed, the obligation to end the torrent of scornful, libelous fax messages sent by the Westboro Baptist Church over the last few years. The challenge is this: Do you stand up for your customers, for the law, for Topeka and for decency? If so, you won't stand alone. The community will stand with you. To those few fortunate ones who have escaped viewing the faxes from Fred Phelps' family: You just would not believe the mean-spirited bile that flows from Phelps' church through area fax machines -- reckless allegations of sexual improprieties and other misdeeds, public and private; doctored cartoons and other copyright infringements meant to embarrass particular individuals; and name-calling and threat-making intended solely to terrorize. This is not free speech. It is high-tech harassment. It is reaching out and touching someone with defamation and mass character assassination. And it must stop. Some of the victims are public officials. Some are community leaders. Still others are private citizens with the misfortune of being discovered by the Cult of Contempt. Most importantly, they are all human beings. They don't have to live with this. The Phelpses have an absolute right to wallow their lives away in the sewer of their creation. But the good people of Topeka have no such obligation. The good people of Topeka have a right to peace and harmony. The local band of haters is disturbing that peace in every way it can, taking glee in each new wound it makes. But it is now time for healing. Some, including local business owner Kent Garlinghouse and attorney Jerry Palmer, say Southwestern Bell can begin the healing process. They believe Bell can and should prevent further abuse of its telephone customers by discontinuing phone service to Phelps' church. The question is not whether Southwestern Bell is a good corporate citizen. It is. The only question is, can it be better? It just might. Perhaps to its credit, the phone company has thus far treaded lightly. It has legitimate concerns about denying phone service to anyone based on how the phones are used. Unfortunately, that caution -- which many of Topeka's other institutions have shown -- is outdated. The Phelpses' willingness to stretch the bounds of reason has made it so. In addition, Bell clearly has an obligation to do everything possible to prevent abuse of its customers. The present situation calls for firm action. Palmer argues the phone company has the power to shut off phone service to the church under Kansas Corporation Commission regulations. Palmer also says the KCC regulations need to be beefed up -- to protect not just the recipient of the faxes, but the subject of them. Bell says it simply can't take the action Palmer is prescribing. Yet, it would seem otherwise. Regulations clearly allow the phone company to discontinue service that is used "for a call or calls, anonymous or otherwise, if made in a manner which reasonably could be expected to frighten, abuse, torment or harass another" Can there be any doubt that the above describes the Phelps family of faxes? It's time to stop pussyfooting around. If you feel Southwestern Bell should stop this madness, call the company and tell it to. Tell Bell to protect the law-abiding, peace-loving customers it enjoys in this area. And once Bell steps forward to end this tele-terrorism, the rest of the community should step forward with it. That means further action by the city government and law enforcement commun- ity to bring a resolution to the pickets, by the same family, that are intended to torment and disrupt Topeka's cultural and religious life. And it means other good citizens and corporate citizens stepping forward to defend one another -- to take back Topeka. The community puts it to you, Southwestern Bell. Are you the one to call on? ==================================================== Reprinted with permission of TCJ Editor Mike Ryan Phone Conversation, 01.21.95 From The {Topeka Capital-Journal} Letters to the Editor Sunday, January 29, 1995 Southwestern Bell Telephone has heard your calls, Topeka. But the message we've received is mixed. On one hand, we've heard from those of you who want us to unilaterally disconnect a customer's service for allegedly sending harassing facsimile messages. On the other hand are those who fear that such unilateral action by a telephone company could amount to an abuse of power. They support existing procedures, which involve safeguards for the suspension of any customer's service. They view these procedures as necessary to protect all customers from inappropriate limits on their speech. We understand and appreciate the concerns expressed by both sides of this troublesome issue. We hope the community appreciates our deliberate approach to considering the interests of all customers. We have heard complaints from customers claiming they have received harassing faxes. We stand ready to implement the established procedures to address their concerns. However, as a regulated telecommunications provider, we have a gen- eral obligation to serve everyone who requests service in our operating area. Therefore, before we suspend a customer's service we must have facts. At a minimum, the source of the offensive fax must be clearly established. The author of a fax might not be the person abusing the service of the complaining customer. For example, we need to make sure someone else hasn't received the fax, then retransmitted it to the complaining customer. To do that, we put a "trap" on the complaining customer's telephone line. But we can't do that without the written approval of the recipient. Once the sending customer has been identified we can advise him or her and law enforcement authorities that the faxes are not wanted by the recipient. We also will let the sender know that if they continue to send faxes to the complaining customer, their telephone service may be terminated. Although no customer complaining of unwanted faxes has yet to provide the necessary authorization, we are following up with customers who indicated a willingness to authorize a trap in response to {The Capital- Journal's January 22 editorial. In addition, we are investigating the December 19 court ruling by Judge Barbara that may establish grounds for enforcement action under our tariffs. If that's the case, it could ultimately lead to suspension of service. We are obtaining court records, and will carefully review those and take any appropriate action. We are also exploring procedures that could be implemented to deal with the problem of harassing faxes. There are various calling features, including Call Blocker, that may help. In short, Southwestern Bell Telephone is committed to taking what we think is a responsible approach -- one that meets our obligations to all of our customers. But we need their commitment, too. Without that, we are limited in our ability to solve their complaints. We are listening, Topeka -- to both sides of the story. Melanie S. Fannon, President-Kansas, Southwestern Bell Telephone, Topeka [all above reprinted with permission of {Topeka Capital-Journal}.] ------------------------------ Date: Wed, 01 Feb 1995 13:35:18 EST From: Rob Slade Subject: Book Review: "Fundamentals of Telecommunication Networks" BKFNTLNT.RVW 941128 "Fundamentals of Telecommunication Networks", Saadawi et al, 1994, 0-471-51582- 5, U$69.95 %A Tarek N. Saadawi %A Mostafa H. Ammar %A Ahmed El Hakeem %C 605 Third Avenue, New York, NY 10158-0012 %D 1994 %E John G. Proakis %G 0-471-51582-5 %I John Wiley & Sons, Inc. %O U$69.95 800-CALL-WILEY 212-850-6630 Fax: 212-850-6799 Fax: 908-302-2300 %P 485 %S Telecommunications and Signal Processing %T "Fundamentals of Telecommunication Networks" This work is intended as a text for a two-semester course at the senior or graduate level. The organization is slightly odd, with discussions of data link and routing coming before flow control and access contention, but the content is basically sound. The material, and particularly the chapter end questions, show a decided preference for the engineering curriculum. Those wanting practical information may wish to pursue other sources. copyright Robert M. Slade, 1994 BKFNTLNT.RVW 941128. Permission given for distribution in TELECOM Digest and associated publications. Vancouver ROBERTS@decus.ca Institute for Robert_Slade@sfu.ca Research into rslade@cue.bc.ca User p1@CyberStore.ca Security Canada V7K 2G6 ------------------------------ Date: Wed, 1 Feb 95 07:41 EST From: Hardwire <0003436453@mcimail.com> Subject: MCI to Launch First Nationwide Sonet/ATM Network networkMCI Services Jim Collins 214-918-5569 MCI TO LAUNCH FIRST NATIONWIDE SONET/ATM NETWORK Network Will be First To Combine Advanced Switching and Transmission Technologies for Commercial Use DALLAS, TX, January 30, 1995 - MCI today announced that in March of this year it plans to activate the world's first nationwide "virtual" high-speed commercial telecommunications network, combining advanced information age technologies known as Synchronous Optical Network (SONET) And Asynchronous Transfer Mode (ATM). Marking a major milestone in the development of the information super- highway, the new network will be capable of combining voice, data and video transmissions together at 155 megabits (155 million bits of information) per second over MCI's high-speed backbone network, currently operating at 2.5 gigabits (2.5 billion bits) per second -- the equivalent of transmitting the entire U.S. Mail list of names and addresses across the country in less than a minute. "This network is the first-of-its-kind to combine both of these advanced telecommunications technologies in one seamless commercial operation nationwide," said John Gerdelman, president of networkMCI Services. "SONET and ATM will allow voice, data and video signals to be transmitted over the same channel simultaneously, and are vital components of the innovative multimedia applications and information services that we are developing." As communications technologies converge, MCI customers will continue to have available to them an increasing array of new services, from advanced telemedicine applications and rapid image transfers to remote data access and online shopping -- at the touch of a button. Last year, the company introduced networkMCI BUSINESS, the first software application combining important business tools, such as electronic mail, fax messaging, document sharing, videoconferencing and information services, in a single product. MCI also launched it's HyperStream ATM service, currently the Fastest on the market, and is the only carrier offering SMDS. This now gives MCI the lead in providing the nation's most complete data services. Other recent MCI innovations include internetMCI, a portfolio of services giving customers easy, high-speed access to the rapidly growing and increasingly popular Internet. MCI continues to invest in the latest telecommunications technologies, such as SONET and ATM, faster than other long distance carriers. Recently, the company added ATM capabilities and plans to provided SONET to its Developers Lab in Richardson, Texas, bringing the power and intelligence of these technologies to outside developers for the first time. The Lab, which MCI refers to as "the twenty-first century garage," offers developers the opportunity to test innovative applications in a live network environment. According to Gerdelman, MCI's goal is to create the "network for the information age," and provide not only access to information services, but content as well. "With SONET you gain certain benefits in terms of reliability and overall network performance," said Gerdelman. "ATM gives us the advanced switching capability for multiple signal transmissions. Combine the two and you have the foundation of a network that is well positioned to generate new revenue from these emerging markets." MCI plans to boost its transmission speed to 10 gigabits (10 billion bits) per second in early 1996, and is currently introducing new fiber optic technologies that will allow 40 gigabits (40 billion bits) per second transmissions in the near future. "If you think transmitting the entire U.S. Mail list in one minute is fast, just wait," said Gerdelman. "At 40 gigabits we'll be able to do it in only 4 seconds!" MCI, headquartered in Washington, D.C., has expanded from its core long distance business to become the world's third largest carrier of international calling and a premier provider of data communications over the vast Internet computer network. With annual revenue of over $13.3 billion, the company today provides a wide array of consumer and business long distance and local services, data and video communications, on-line information, electronic mail, network management services and communications software. networkMCI Services is the division responsible for developing MCI's information technology and operating its global intelligent network. ------------------------------ Date: Wed, 1 Feb 95 11:02:18 GMT From: ukcbajr@ukpmr.cs.philips.nl (John Bell 3313 ADV) Subject: POCSAG to be Upgraded to APOC To everyone interested in POCSAG, and new more advanced terrestrial paging systems for communications in tommorrow's world: An overview of APOC, the upgrade to POCSAG, is now available by EMail. If you are interested, please send a request to me (ukcbajr@ukpmr.cs. philips.nl) stating the reasons for your interest. This is a summary of the ascii document, which is about 31000 bytes long. --------------- Start of Summary --------------- The need for a new paging protocol is reviewed and the basic philosophy of the APOC code defined. The essential characteristics of APOC confirmed by PCIA in 1993 are greater capacity, battery life and POCSAG compatibility than other codes (POCSAG, ERMES, FLEX) while offering superior or at least equal call success performance. A migration path from POCSAG to High Speed APOC is outlined. The results of a pager network financial model comparing costs per subscriber is shown, also supporting the commercial advantages of APOC. --------------- End of Summary --------------- Please distribute this to list servers, bulletin boards etc. that should know about this -- or let me know who else should know. Thanks in advance, John ------------------------------ From: md@pstc3.pstc.brown.edu (Michael P. Deignan) Subject: 7/8ths Heliax Sources Needed Date: 1 Feb 1995 10:48:45 GMT Organization: Population Studies & Training Center I need to find 350' of 7/8ths 50ohm heliax for an RF application I'm working on. Cheapest I've been able to find is $4.50/ft. Anyone have other source suggestions? MD ------------------------------ End of TELECOM Digest V15 #73 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa03542; 2 Feb 95 23:30 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA20735; Thu, 2 Feb 95 19:33:15 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA20729; Thu, 2 Feb 95 19:33:12 CST Date: Thu, 2 Feb 95 19:33:12 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502030133.AA20729@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #74 TELECOM Digest Thu, 2 Feb 95 19:33:00 CST Volume 15 : Issue 74 Inside This Issue: Editor: Patrick A. Townson More Tidbits on AT&T True-Connections (NPA 500) (John Shelton) Panasonic Cellular Phone (James L. Wiley) Re: Hidden Features of Panasonic Phones (Steve Samler) Re: Neighborhood Phone Books (Wm. Randolph Franklin) Caller ID Block Fails (Wm. Randolph Franklin) Multiple ESN's per NAM (Update) (Chris J. Cartwright) 503 NPA Split? (Dan McDonald) New Area Code For Oregon (Paul Buder) Re: 28.8k bps Modem (Alan Shen) Re: 28.8k bps Modem (David Hayes) Re: 28.8k bps Modem (David Sacerdote) Re: 28.8k bps Modem (John Dearing) Re: 28.8k bps Modem (Eric Nelson) Re: 28.8k bps Modem (Scott Lorditch) Re: 28.8k bps Modem (Steve Midgley) Re: Chicago 630 Plan - Such As It Is (Mark Peacock) Re: Chicago 630 Plan - Such As It Is (Greg Monti) Re: Chicago 630 Plan - Such As It Is (Carl Moore) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: jls280c@crusher.dukepower.com (John Shelton) Subject: More Tidbits on AT&T True-Connections (NPA 500) Date: 1 Feb 1995 19:25:54 GMT Organization: dukepower I talked with AT&T yesterday and learned: More exchanges have been added to their set. You can now request numbers from: 288 346 367 437 442 443 445 446 447 448 449 488 673 674 675 677 679 My favorite, 500.FOR.EVER, was already taken. Even though the install and vanity fees are waived during this sign-up period, if one requests a *change* (better vanity number) they will impose the $10 install and $25 vanity fees. AT&T claimed that as of yesterday (31-Jan-95) "All" LECs had agreed to provide access, so I should be able to use this from anywhere in continental US. (I'll be pleased if it gets worked out in three months.) A friend who has AT&T, but lives in an Alltel neighborhood says AT&T cannot provide her this service. Neither AT&T nor Alltel could explain. Yes, her AT&T calls *are* billed on the local phone bill. For the deluxe plans which offer sequencing, I'm told you can program the number of rings to try for each number. That's very important. My service will be turned on 15-Feb-95. John [TELECOM Digest Editor's Note: Like heck it will be turned on February 15! AT&T told me mine would be working January 21, then they said January 24. After that date passed, the due date was January 31 ... you guessed it; it still is not working as of today, Thursday, February 2 in the evening. I call them they say call Ameritech; I call Ameritech and am told to call AT&T. I call the Illinois Commerce Commission; they claim no knowledge of any 'agreement' reached between AT&T and the telcos. Now for the past couple days they won't return my calls. Supposedly my number is working if the caller knows to dial 1-800-CALL-ATT for starters, just like the cumbersome 700 service, but when I tried it that does not work either. I did not sign up for this service so my callers could hunt down a pay phone which allows 800 calls so they can punch in all those extra digits, even if that part of it did work, which it appears not to. Just now I called AT&T again about it; this time I got a woman who first said calls to 1-500 were not going through but 0-500 should be working 'just fine'. She put me on hold awhile and came back to report she had talked to 'the specialist' and was told 'everything was working fine' for Ameritech customers. Silly bunch of people! I told her to cancel my service and whenever they get their act together to give me a call back and I will think again if I need the service or not. PAT] ------------------------------ From: wileyjl@ada1.elan.af.mil (James L. Wiley) Subject: Panasonic Cellular Phone Date: 1 Feb 1995 17:02:49 GMT Organization: Air Force Flight Test Center I am looking for a owner's manual for a Panasonic Cellular Phone model EF-6110EA. Also any modifications anyone knows about for this Phone. Where is a good place to get accessories -- batteries, cords, etc. Thanks, James L. Wiley Wileyjl@ada1.elan.af.mil ------------------------------ Date: Wed, 1 Feb 1995 11:59:01 EST From: Steve Samler Subject: Re: Hidden Features on Panasonic Phones I don't know about the hidden features, but I have one of these that seems to be able to turn itself off. The answering machine is left on in the morning and often is off when I come home. I suspect that there is some hidden feature that turns off the phone. Maybe if you call and press # or * (thinking it is a voice mail system) it turns off. ------------------------------ From: wrf@ecse.rpi.edu (Wm. Randolph U Franklin) Subject: Re: Neighborhood Phone Books. Caller ID block fails. Date: 02 Feb 1995 02:31:36 GMT Organization: ECSE Dept, Rensselaer Polytechnic Institute, Troy, NY, 12180 USA Reply-To: wrf@ecse.rpi.edu (Wm. Randolph U Franklin) In article on Tue, 24 Jan 1995 11:13:54 EST, PAT says: > ... There are about thirty 'neighborhood' books, with their > own yellow pages in the back of the book. These are just > subsets of the larger book, extracted by address groupings > within a given area of the city, and all published by telco. NYNEX extracts by exchange, which makes the neighborhood directories so incomplete as to be useless. I live in Loudonville, but have phone 482-xxxx since the Loudonville prefix, 456, is full (I guess). 482 is mostly Albany, and the Loudonville neighborhood directory omits me, even tho the big white pages give my address as Loudonville, and give my Loudonville zip code. I once complained to Nynex about being omitted, and they said that since my phone was logically in Albany, I'd have to pay to be included in the Loudonville directory. Maybe I could have protested, but life's too short. Wm. Randolph Franklin, wrf@ecse.rpi.edu, (518) 276-6077; Fax: -6261 ECSE Dept., 6026 JEC, Rensselaer Polytechnic Inst, Troy NY, 12180 USA More info: (1) finger -l wrf@ecse.rpi.edu (2) http://www.ecse.rpi.edu/homepages/wrf ------------------------------ From: wrf@ecse.rpi.edu (Wm. Randolph U Franklin) Subject: Caller ID Block Fails Date: 02 Feb 1995 02:31:36 GMT Organization: ECSE Dept, Rensselaer Polytechnic Institute, Troy, NY, 12180 USA Reply-To: wrf@ecse.rpi.edu (Wm. Randolph U Franklin) Nynex just admitted that 500 people who have caller ID block, are, in fact, having their phone numbers transmitted. First, they denied that this was happening, then they said that only one person (a private detective) was affected, then they 'fessed up. Wm. Randolph Franklin, wrf@ecse.rpi.edu, (518) 276-6077; Fax: -6261 ECSE Dept., 6026 JEC, Rensselaer Polytechnic Inst, Troy NY, 12180 USA More info: (1) finger -l wrf@ecse.rpi.edu (2) http://www.ecse.rpi.edu/homepages/wrf [TELECOM Digest Editor's Note: Did the report say if they are all on the same exchange, or how the problem came up and if it has been fixed? PAT] ------------------------------ Date: Thu, 02 Feb 1995 11:18:00 EST From: Chris J. Cartwright Subject: Multiple ESN's per NAM (Update) I posted a few weeks ago about Cell One in MD (SID-00013) offering FlexPhone to their customers. To recap *it is* multiple ESN's per NAM. Up to three ESN's can have the same NAM. The cost is your regular service for one phone plus $18 for two NAMs, or plus $30 for three. The service _seems_ ;) to work as follows; The phones cannot call each other even if they are in different cells. Roaming is supposed to be disabled on all but the phone with the primary ESN. This is almost true, when I used the second ESN in roam every other call was blocked with a message that said you would have to use a credit card or third party billing to place a call. If I pressed send again (same number dialed) the call would go through. I'm not sure of this is a function of the cell system you are roaming in or if the information from your home system is getting confused. If calls are placed in the same cell at the same time by both phones one of the phones will get a fast busy. No calls can be made from the other phone while the first is in a call. CellONE says that calls can be made from seperate cells at the same time but reccomends against it since they aren't sure what will happen if both phones wander into the same cell at the same time (to be fair this came from a salesman since the tech folks seem to be hidden away fairly well). I haven't had a chance to check this one out but as soon as I figure out how to be in two places at once. I haven't seen a bill for this but I'm wondering if I should argue the fact since my secondary *can't* roam those calls shouldn't be billable. If anyone has questions I'd be happy to test things out if you can resonably describe your test case. E-mail is preferred and will get a faster response. Chris Cartwright, Technical Engineer Voice 301.295.0809 Mail dsc3cjc@imc220.med.navy.mil C-serve 71614,2441 [TELECOM Digest Editor's Note: The tech people are always hidden away where no one can reach them conveniently; not without being perfectly obnoxious and very pushy with the front line people. As for 'being two places at one time' you don't have to be. Wherever you are, just take both (all) of your cell phones and turn them on. Have them all sitting there then from a separate line dial the cellphone number. Now, you will have both phones in the same cell at one time obviously, and can test the results for your- self. Also, use the cell phones to dial out two or more calls at the same time. Since they are all with you, they'll all be in the same cell, right? Please report the results here. PAT] ------------------------------ From: mcdonald@teleport.com (Dan McDonald) Subject: 503 NPA Split Planned? Date: Thu, 02 Feb 1995 10:38:16 PDT Organization: Teleport - Portland's Public Access (503) 220-1016 I've heard rumors of a split in the 503 area code (Oregon). Can anyone confirm or deny these rumors? Daniel J. McDonald home: mcdonald@teleport.com Telecom Designer work: 2397@idchq.attmail.com Industrial Design Corporation pots: 1.503.653.6919 [TELECOM Digest Editor's Note: A recent newspaper article seems to indicate this is true. See the next article in this issue. PAT] ------------------------------ From: paulb@teleport.com (Paul Buder) Subject: New Area Code For Oregon Date: 02 Feb 1995 09:41:20 -0800 Organization: Teleport - Portland's Public Access (503) 220-1016 According to the {Oregonian}, Portland's daily newspaper, Oregon will be moving from one area code to two in 1996. The PUC is soliciting comments from the telephone companies as to whether it should be a geographical split or whether simply new lines will end up in the new area code (blechh!). The article says US West, the Baby Bell here, hasn't responded yet. paulb@teleport.COM Not affiliated with teleport. ------------------------------ From: Alan Shen Subject: Re: 28.8k bps Modem Date: Thu, 02 Feb 1995 00:26:40 -0800 Organization: University of Washington On Wed, 25 Jan 1995, Victor Hu wrote: > 1. Is the bps across the twisted pair wire actually running at 28.8 or > 14.4 when 28.8 is invoked? Or is it just data compression? 28,800 bps uncompressed. RAW SPEED. > 2. What kinds of host supports 28.8K? I only connect up to my > university's computer which only runs at 9.6K max. It's not dependent on the host, but if the other modem supports that speed. To connect at 28.8Kbps, the other modem must support it too. Here at our university's computer, we can only connect at 14.4, but supposedly, they are installing 28.8 V.34's by this summer. > 3. What is the speed of fax machines? 99% of the stand-alone fax machines out there (the non-fax/modems) only support speeds of up to 9600bps. And actually, that's plenty of power for Group III. Others, very few though, can go up to 14,400bps on the standard V.17. Most fax-modems support that speed. > My impression of my new modem: > 1. The Supra has a nice display (external version for the PC) that > shows the mode of transmission. I have a PM14400FXSA with a 12-character LCD. Sure beats LEDs doesn't it! > 2. However, I found that it required a different initialization string > than that suggested as default for modems that are Hayes compatible. Some modems work okay with just a standard init string and a simple ATZ. I finally figured out one that works with 300bps - 14,400bps. Do a little tweaking and some experimenting. You'll figure one out too soon! If you have any more question, feel free to e-mail me. (kermee@u.washington.edu) Daniel Kao ------------------------------ From: dhayes@onramp.net (David Hayes) Subject: Re: 28.8k bps Modem Date: 02 Feb 1995 17:41:21 GMT Organization: On-Ramp; Individual Internet Connections In article , vhu@AGSM.UCLA.EDU says: > 1. Is the bps across the twisted pair wire actually running at 28.8 or > 14.4 when 28.8 is invoked? Or is it just data compression? The modem is capable of sending 28.8k without compression. On top of this, the standard V.42bis compression scheme can achieve up to 4:1 compression, so you could theoretically get up to 115k bits/second. I observe 2:1 to be more common, though, so expect about the same throughput as an uncompressed 56kbps leased line. > 2. What kinds of host supports 28.8K? I only connect up to my > university's computer which only runs at 9.6K max. Anything that's got a fast async serial port. Your university's computer probably could handle it, but the modems they use limit you to 9.6 (standard V.32). This is a common situation. To test your modem, try some of the bulletin board systems in your area. Many of them upgrade more quickly than large university sites, because they have fewer modems to upgrade. Note that you can even try BBS's on which you do not have a login. All you need to see is that your modem will connect. >3. What is the speed of fax machines? CCITT (now renamed ITU.T) standard Group III fax machines run at 9600 bps. David Hayes dhayes@onramp.net ------------------------------ From: DSacerdo@world.std.com (David Sacerdote) Subject: Re: 28.8k bps Modem Organization: The World Public Access UNIX, Brookline, MA Date: Thu, 02 Feb 1995 18:10:49 GMT If you purchased a modem which supports the v.34 standard AND are using a computer to modem communications speed which is faster than 28800bps it will actually travel across the wire at 28800bps, assuming no line noise, no error correction, and no compression. I am also assuming that you are connecting to another modem which supports the V.34 standard, or whatever proprietary standard your modem supports. David Sacerdote ------------------------------ From: jdearing@netaxs.com (John Dearing) Subject: Re: 28.8k bps Modem Date: 02 Feb 1995 05:25:43 GMT Organization: Netaxs Internet BBS and Shell Accounts Victor Hu (vhu@AGSM.UCLA.EDU) wrote: > 1. Is the bps across the twisted pair wire actually running at 28.8 or > 14.4 when 28.8 is invoked? Or is it just data compression? The modem-to-modem (across the wire) communications rate will be up to 28.8Kbps assuming a clean connection. > 2. What kinds of host supports 28.8K? I only connect up to my > university's computer which only runs at 9.6K max. Let me get this straight ... you only use the modem to connect to the University computer system which only has 9600bps modems. Then why buy a 28.8Kbps modem if the other end can't do 28.8Kbps?? Even a 14.4Kbps modem would have been overkill. A 28.8Kbps modem will only connect at 28.8Kbps with another 28.8Kbps modem. Unless/until the University decides to upgrade their modems, you won't see any improvement. : 3. What is the speed of fax machines? Almost all real fax machines are 9600 bps. There are a few fax machines that support fax at 14.4. If you connect to another fax modem that also supports 14.4K then both faxmodems will negotiate a higher speed. Expect most of your faxes to go through at 9600 bps. John Dearing jdearing@netaxs.com ------------------------------ From: mater@PrimeNet.Com (Eric Nelson) Subject: Re: 28.8k bps Modem Date: Wed, 1 Feb 1995 20:31:10 MST Organization: Primenet A 28.8 kbps will transmit 28.8 kbps if the line can support the modulation used to get that 28.8k rate. Data compression can be used on uncompressed files to increase the throughput, but this has little value when transferring compressed files. Additionally, the other end must have a 28.8k capable modem. My internet provider does have 28.8k connection. ------------------------------ From: gryphon@j51.com (Scott Lorditch) Subject: Re: 28.8k bps Modem Date: 02 Feb 1995 14:08:03 -0500 Organization: TZ-Link, a public-access online community in Nyack, NY. You should set your PC's serial port to at least 56K when using a 28.8 modem to get the effect of compression as well. I often set mine to 115 kbps. > 2. What kinds of host supports 28.8K? I only connect up to my > university's computer which only runs at 9.6K max. Many Internet service providers offer SLIP and PPP service using 28.8 modems attached to their terminal servers. Every modem manufacturer uses a slightly different superset of the "standard" Hayes command set. Scott Lorditch Senior Network Architect Pepsi Cola North America ScottL@Pepsi.Com ------------------------------ From: tailored@netcom.com (Steve Midgley) Subject: Re: 28.8k bps Modem Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Thu, 02 Feb 1995 20:09:02 GMT With sheepish apologies to the moderator and readers, I amend my previous post. I must have sleeping sitting down :-) V.32 is not the protocol spec for 14.4 modems. It's V.42. Apologies, apologies. Steve Midgley Tailored Solutions ------------------------------ Date: Thu, 02 Feb 1995 09:03:50 -0600 From: mpeacock@dttus.com Subject: Re: Chicago 630 Plan - Such As It Is Greg Monti writes: > The story then says, cryptically, that the plan also would "create > 'permissive and mandatory dialing arrangements' that wouldn't > jeopardize new competitors". And that the City of Chicago "opposed > the stipulation on ground that eleven-digit rather than seven-digit > dialing requirement was 'onerous' and might predetermine similar fate > for 312 area code where customers are used to seven-digit intraLATA > calls." Greg's adjective "cryptically" is very apt. What the story does not make clear is that, under the ICC proposal, the combined 708/630 NPA area would go to *mandatory* 11-digit dialing in September 1996. This is because the 630 code would overlay the 708 geographic area for both landline and wireless service. The very real example is: You move to a new house and request service; your phone number is 630-NXX-XXXX while your neighbor's number is 708-NXX-XXXX. The city of Chicago is opposed because they believe this ruling will set a precedent for when the 312 NPA again runs low on numbers. By the way, this is not a done deal. The proposed plan is the recommendation of the ICC case worker. The full ICC will consider the recommendation in February. Given the noise being raised over mandatory 11-digit dialing, there may be some significant changes in the future. Mark Peacock Deloitte & Touche Management Consulting Detroit, Michigan [TELECOM Digest Editor's Note: Area 312 Chicago is quite unlikely to run low on numbers anytime soon. So many large businesses and industries -- the type of companies which would use large blocks of numbers or even entire prefixes for their centrex, etc -- have moved out of town, there are lots of spare numbers. 708 is a different matter. It is quite crowded. PAT] ------------------------------ Date: Thu, 02 Feb 1995 9:57:21 EST From: Greg Monti Subject: Re: Chicago 630 Plan - Such As It Is Thanks to David W. Tamkin , we have a better interpretation of one of the proposed Chicagoland dialing plans. A proposal on the table is for mandatory eleven-digit dialing within one's own area code as of the autumn of 1996. This is to please the Gods of Dialing Parity. Seven digit dialing *between* NPAs was *not* proposed. Greg Monti, Tech Mgr, FISPO, Distribution Division National Public Radio Phone: +1 202 414-3343 635 Massachusetts Av NW Fax: +1 202 414-3036 Washington, DC 20001-3753 Internet: gmonti@npr.org ------------------------------ Date: Thu, 02 Feb 95 16:49:45 GMT From: Carl Moore Subject: Re: Chicago 630 Plan - Such As It Is 630, as you have heard, is to be used for overlay of area codes 312 and 708. But I have also seen 630 in use as a prefix in downtown Chicago. Here is one such use: Bach's Bookstore, 209 N. Wabash, Chicago, IL 60601, tel. 312-630-9113. ------------------------------ End of TELECOM Digest V15 #74 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa04202; 3 Feb 95 0:33 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA21785; Thu, 2 Feb 95 20:16:05 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA21777; Thu, 2 Feb 95 20:16:03 CST Date: Thu, 2 Feb 95 20:16:03 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502030216.AA21777@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #75 TELECOM Digest Thu, 2 Feb 95 20:16:00 CST Volume 15 : Issue 75 Inside This Issue: Editor: Patrick A. Townson Digital Announces Unix Intelligent Delivery Platform (Philippe Ravix) Stand-Alone Fax Box for PC (Yongtao Chen) Re: Ten Digit Dialing (Wes Leatherock) Re: Ten Digit Dialing (Tad Cook) Re: Ten Digit Dialing (Scott Montague) Re: Ten Digit Dialing (Terrence McArdle) Re: LD Termination Fees to RBOCs (John Levine) Re: LD Termination Fees to RBOCs (Mike Boyd) Re: LD Termination Fees to RBOCs (Patton M. Turner) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Thu, 2 Feb 95 10:21:17 PST From: Philippe RAVIX Subject: Digital Announces Unix Intelligent Delivery Platform DIGITAL ANNOUNCES UNIX INTELLINGENT NETWORK SERVICES DELIVERY PLATFORM February 1, 1995, NEW ORLEANS: Digital Equipment Corporation today announced a UNIX version of it's powerful and flexible Intelligent Network Services Delivery platform. This UNIX platform is the latest addition to Digital's IN Product Portfolio; a full array of Intelligent Network products which are running today in live Telecom wireline and wireless networks world-wide. Building on proven experience in delivering IN revenue producing new solutions, Digital has added leadership UNIX and AlphaGeneration products to produce an unbeatable new IN platform. Digital also announced several new features that will be available on both the new UNIX and existing OpenVMS versions of the IN Services Delivery Platform. Of particular interest to Wireless Network Operators attending CTIA are: * TCAP ITU-T White Book compliance for the support of wireless services implementing MAP Phase 2. * Support of multiple standards (example ANSI and ITU-T) within the same platform enabling creation of services requiring IS41-GSM gateways. In addition, Digital announced price reductions of up to 35% for both the OpenVMS and UNIX versions. This includes the entry level platform which is used for service development or provision of test market or specialized services. This entry level platform is now the lowest priced on the market. Digital's IN Services Delivery Platforms are based on two key elements: the AlphaGeneration family of processors -- the fastest in the world -- plus DECss7, Digital's implementation of world-wide Signalling System Number 7 protocol standards. DECss7 is a unique distributed implementation which provides unsurpassed levels of availability and scalability. Digital's UNIX is the first UNIX to integrate all of the UNIX standards including UNIX System V. The IN Services Delivery Platform is used today as the foundation for implementing a large variety of IN systems such as Service Control Points (SCPs), Intelligent Peripherals (IPs), Mobile Services Platforms providing HLR, VLR, AUC, EIR, and SMSC services plus gateways providing inter-standard connectivity services. The new UNIX version of Digital's IN Services Delivery Platform provides the same proven functionality as the OpenVMS version including: o NON-STOP AVAILABILITY: The IN Services Delivery Platform provides software fault tolerance plus the ability to implement configuration upgrades without service interuption. The platform has passed the strictest availability tests in the telecom industry performed by some of the most discriminating Network Operators in the world. o FULL RANGE OF CONFIGURATIONS: A unique client-server based distributed architecture allows a choice of configurations to match all levels of performance and availability requirements. The range is from an entry level platform (to be used in both a lab environment for development purposes or a live network environment for deployment of pilot or highly specialized services) through to fully distributed, high performance, high availability configurations. Applications running on an entry level platform are transparently upgradable to a distributed IN Services Delivery Platform. o POWERFUL PERFORMANCE AND SCALABILITY: Digital's IN Services Delivery Platform can handle from two to hundreds of SS7 links and thousands of SS7 messages per second. Non-stop addition and removal of machines to the distributed platform allows capacity to be added as requirements evolve. With the IN Services Delivery Platform's distributed architecture, Network Operators can be assured of the smoothest path available to grow the platform as the subscriber base and service success grow. o COMPLETE CONNECTIVITY: The IN Services Delivery Platform is fully SS7 standards compliant, including ITU-T, ANSI, and TTC. In addition, many country variants are supported. Different SS7 standards can be mixed on the same platform enabling the development of inter-standard services and gateways. There is a full array of physical connectivity options. For platforms deployed as Intelligent Peripherals, ISDN protocols and connectivity are supported including ISUP. o EFFICIENT SERVICE DEVELOPMENT: Applications can be developed in C or C++ languages using Digital's leading software development tools. The IN Services Delivery Platform has multiple Applications Programming Interfaces at TCAP, SCCP, and MTP levels which can be accessed simultaneously; a requirement for a number of new services such as GSM Short Message Service Center. o MANAGEMENT TAILORED FOR YOUR ENVIRONMENT: The IN Services Delivery Platform provides powerful and complete management functionality. The complete platform including applications, the configuration, and all of the SS7 defined Signalling Point functionality can be managed in a consistent way from a tailored management application using an object-oriented model. o WORLD-CLASS SERVICES AND MISSION CRITICAL SUPPORT: Digital has provided IN products and services to the major Telecom Network Operators in the world, including full round-the-clock telecom network mission critical support services for some of the highest service revenue producing SCPs in the world. Digital works with a variety of partners to deliver complete computing systems tailored to customer needs and is actively building an expanded global network of value added partners. Digital's goal is to deliver the highest performance and most cost-effective platforms for building computer based Intelligent Network solutions today. Digital's IN Portfolio enables Software Providers, Telecom Equipment Manufacturers, and Telecom Network Operators to produce and implement leading service revenue producing IN services for today and tomorrow's wireline and wireless networks. To have more information you can contact: p_ravix@csc32.enet.dec.com Phone : +1-719-592-4263 Fennelly@ulysse.enet.dec.com Phone : (33)92-95-62-59 Philippe Ravix E-mail: p_ravix@csc32.enet.dec.com Digital Equipment Corporation Phone : +1-719-592-4263 305 Rockrimmon Blvd., South Colorado Springs, CO 80919 ------------------------------ From: yongtao@watnow.uwaterloo.ca (Yongtao Chen) Subject: Stand-alone Fax Box For PC Organization: University of Waterloo Date: Thu, 2 Feb 1995 10:59:53 -0500 I am looking for some kind of "stand-alone fax box" for PC. The box should be able to receive and store coming faxes automatically when I am away from my home, with no need to turn on my computer; and after I come back, I can turn on my computer and down load the faxes received from the box to my PC. Could anybody on net give me some advice about what machine I should buy, or which company I should contact, or which magazine I should look for ads? Any information is very much appreciated. Please reply to "cheny@cognos.com" or "yongtao@watnow.uwaterloo.ca" Thanks, yongtao ------------------------------ From: wes.leatherock@oubbs.telecom.uoknor.edu Subject: Re: Ten Digit Dialing Date: 2 Feb 1995 08:53:50 -0600 Organization: UTexas Mail-to-News Gateway evan champion wrote: > Recently there has been a lot of talk about having to do ten digit > dialing to call even local numbers that are in a different phone > number. > I have a number of users who are going to be affected by the above > and am looking for a good explanation for them. I'm myself am not > completely sure myself of all the reasons for making the changes to > out-of-area dialing and would like to get it right the first time :-) > [TELECOM Digest Editor's Note: Actually, it is eleven digit dialing, > not ten digit if you count the '1' on the front. However, one would > think that when this becomes universal all over the USA that we could > in fact get by with ten digits since the '1' would no longer be > needed; there would be no 'local' calls to distinquish from 'long > distance'. Since everything that we dial would consist of area code > plus seven digits, there would be no need for a '1' to indicate that > 'what follows is an area code' -- everything that follows would be > area codes! In the Dallas-Fort Worth metropolitan area, you must dial 10 (not 11 digits) if you are dialing a call to a local number in the other area code. (Dallas is in the 214 NPA, Fort Worth in the 817 NPA.) One-plus dialing in those exchanges does not indicate that an area code follows, but that the call is a toll call. (Of course, now that an area code is required on all One-Plus dialing, there will be an area code on all toll calls, but at least in the Dallas-Fort Worth area the 1+ does not indicate anything but that the call is a toll call.) Note that almost all telephone service in the Dallas-Fort Worth area is flat rate. A local call generates no billing whatever (except for the very few message rate customers). This is true, I believe, almost everywhere in the United States except in the Northeast and in the Chicago area. The LECs would dearly love to introduce "usage sensitive pricing" everywhere, but customers with flat rate service generate such tremendous protest that even if the commission will consider it, the state legislature will start considering legislation to make mandatory message rate charging unlawful in that state. (The legislature would probably pass it, too, if the commission itself didn't reject the idea.) Complaining and protests about general rate case activity pale into insignificance compared to the heat generated by proposals to abandon flat rate pricing. Wes Leatherock wes.leatherock@oubbs.telecom.uoknor.edu wes.leatherock@f2001.n147.z1.fidonet.org ------------------------------ From: tadc@seanet.com (Tad Cook) Subject: Re: Ten Digit Dialing Date: 1 Feb 1995 23:03:27 GMT Organization: Seanet Online Services, Seattle WA TELECOM Digest Editor noted in response to evan champion (evanc@bnr.ca): > [TELECOM Digest Editor's Note: Actually, it is eleven digit dialing, not > ten digit if you count the '1' on the front. However, one would think that > when this becomes universal all over the USA that we could in fact get by > with ten digits since the '1' would no longer be needed; there would be > no 'local' calls to distinquish from 'long distance'. Since everything that > we dial would consist of area code plus seven digits, there would be no > need for a '1' to indicate that 'what follows is an area code' -- everything > that follows would be area codes! It would be nice to see the '1' vanish > under those cirucmstances. Or maybe they will insist on keeping it using > as their rationale that '1' is also -- by coincidence -- the country code > for the USA and Canada, and that what we are really dialing is country code, > area code and seven digit number. As to *why* they are imposing it on calls > within the same area -- as is supposed to be the case in Chicago beginning > sometime in 1996 -- I do not know. Various reasons have been given. PAT] Chicago is a unique case though. Chicago will have an overlay area code, and since someone using a phone within Chicago could possibly have no idea what area code it is in, this means that all local calls must dial the area code and number, since phones right next to each other could be in different NPAs. In the rest of North America, we are having to dial the area code for all long distance calls within the area code, so that the system can handle the new area codes that look like prefixes. Tad Cook tad@ssc.com Seattle, WA ------------------------------ From: 4sam3@qlink.queensu.ca (Scott Montague) Subject: Re: Ten Digit Dialing Date: Wed, 01 Feb 95 15:32:17 GMT Organization: Queen's University at Kingston evan champion wrote: > Recently there has been a lot of talk about having to do ten digit > dialing to call even local numbers that are in a different phone > number. Bell Canada chose to have it's Toronto customers dial ten digit LOCAL calls. This way, two exchanges can be used within a local calling area. Example: If you wanted to dial 1050 CHUM Newsroom in Toronto (416) from Pickering (905) (a local call) you would dial 416-923-1133. This would allow the creation of a 923 exchange in Pickering, which could be used for different customers. Inversely, to call someone local in (905), you would dial 10 digits 905-xxx-yyyy to call them from (416). This has already been implemented. The reason: Bell Canada is concerned that they will run out of exchanges in 416, and want to keep all 905 open for local calls. (Or else, 416 would have to omit certain exchanges that their local calls are made to ... it's so contrived ... and then when they run out again (which they will) they'll have to implement the ten digit dialing; let's get it all over with, they say). I believe that they now want universal dialing procedures across area codes for their customers, and subsequently are implementing this system across area codes that don't necessarily need it, like the 604-905 boundary. Always planning for the future, I guess. BTW, If you Americans want an example of a world class phone company, look north to Bell Canada. Great staff, instant repairs, easy access to all services (and tarrifs :-) ), quickly resolved billing disputes, hardly ever any billing errors, great business and residential service. >From the horror stories in the US, I think some companies could learn alot from Bell Canada. (OK, their long distance is a bit more expensive, but it's worth it.) Scott ------------------------------ From: mcardle@paccm.pitt.edu (Terrence McArdle) Subject: Re: Ten Digit Dialing Date: Thu, 02 Feb 1995 16:15:21 -0500 Organization: University of Pittsburgh Medical Center Just for clarification's sake, I assume the phrase "local numbers that are in a different phone number" means dialing a destination existing in separate exchange, but the same area code, as the originator? Calls that cross a LATA boundary currently require eleven digit dialing, do they not? And with regard to Pat's note, who is referred to by "they"? Standards bodies? Or a general consensus of the major RBOCs? Or some other entity? Thanks, Terry McArdle email mcardle@paccm.pitt.edu Mgr, Information Systems work (412) 648 9218 Pulmonary, Allergy, and Critical Care University of Pittsburgh Medical Center [TELECOM Digest Editor's Note: 'They' are the people I feel irritated with at the time! PAT] ------------------------------ From: johnl@iecc.com (John Levine) Subject: Re: LD Termination Fees to RBOCs Date: Thu, 02 Feb 95 07:27:21 GMT > Local should be charged higher because it is expensive. You provide > unlimited free calling for a flat fee instead of charging on a call by > call basis. Of course you lose money. You're making the increasingly unwarranted assumption that local bandwidth is expensive. I make lots of umpteen hour long calls (computer to computer, of course) but since they're within the same switch, I find it difficult to identify any basis on which this actually costs the telco more than if I left the phone on the hook. > But the LEC doesn't get paid for all the incomplete calls, all the > dial back calls, etc and that costs money. Sure they do. FG B and FG D lines are charged for all off-hook time both incoming and outgoing. I believe there is in many cases an extra per-call charge for the info collected and passed by the LEC. > (Some local companies, especally rural, don't even handle long distance. > They just pass it off to someone else to do.) That's right, but they can make a bundle in doing so since they still get a per-minute charge on originating and terminating LD calls. (Some of my cousins run a small rural telco in Vermont that passes all of its LD traffic to NYNEX and AT&T. Because of their cost structure, they get an incredible amount for LD calls, something like 10 cents/minute.) Regards, John Levine, johnl@iecc.com Primary perpetrator of "The Internet for Dummies" ------------------------------ From: Mikeboyd@voyager.cris.com (Mike_Boyd) Subject: Re: LD Termination Fees to RBOCs Date: 2 Feb 1995 13:09:18 -0500 Organization: Concentric Research Corporation Judith Oppenheimer writes: > David Lewis of AT&T wrote: >> Is it just me, or do these numbers (which I'll take on faith for >> now) demonstrate a massive inefficiency and misallocation of costs in >> the current cost structure of telecommunications? >> If 95% of traffic is local (I'll define as "intraLATA"), Then 95% of >> costs (fixed and variable) are due to local traffic. But the majority >> (say, 80%) of LEC revenue is from access charges. Therefore 80% of >> revenue is paying for 5% of cost, and 20% of revenue is paying for 95% >> of cost. >> Does this make sense? > Local should be charged higher because it is expensive. You provide > unlimited free calling for a flat fee instead of charging on a call by > call basis. Of course you lose money. Local access charges are > profitable, and are on a call by call basis. LEC's don't want to lose > that revenue. With bypass and local exchange competition it could be > tough. Sense has little to do with telecom rate making. The current system is an evolution of an archaic and arbitrary system worked out between the phone companies (basically the old Bell System, when it was the telecom world) and regulators (FCC and State PUCs). The first step was to separate the costs, investments, rate base, etc., between the state and federal jurisdictions. The FCC then set interstate rates designed to recover the costs allocated to interstate servivce, and the state Public Utitlies Commission set rates to recover "intrastate costs". Interstate services originally were interstate toll. In the good old days, regulators and the phone companies kept local rates low by allocating the costs to toll. Growth in LD competition, bypass, etc., made this more and more difficult, and made it necessary to shift costs to local. Now, the FCC regulates the access charges LECs charge IXCs to originate and terminate interstate tolls calls. The FCC has also instituted a Subscriber line charge (SLC) to recover some of those "interstate costs" directly from the end users. This is the $3/month on your residential phone bill. Intrastate costs were recovered from local service and from intrastate toll. In the late 80's, intrastate access charges were added. These are charges to IXCs for originating or terminating intrastate (interLATA) toll calls. Because of the way that the costs are separated jurisdictionally, and given the subsequent wide discretion of the PUC in setting rates, intra- state and interstate access charges for a given LEC may vary greatly. For example, terminating a minute of switched traffic from IXC "A" to end user "Z" may cost the IXC 3 cents if the call is interstate and 8 cents if it is an intrastate call. Given a "revenue requirement" for intrastate services, the PUCs are faced with the dilemma of juggling rates between access and local, between residential and business, etc. Set access rates too high, the IXCs bypass the network. Set local too high, you don't get reelected or reappointed. While specific costs are a consideration, rate making is a highly charged political game. ------------------------------ From: pturner@netcom.com (Patton M Turner) Subject: Re: LD Termination Fees to RBOCs Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Thu, 02 Feb 1995 03:41:08 GMT edg@ocn.com (Ed Goldgehn) writes: > All fees charges for LD termination can normally be found in the > Feature Group tariffs. Normally, LD carriers fall under (last I > heard) Feature Group 'D' tariffs due to their method of termination. > You can request a copy of these tariffs from each of the RBOC's or > from the PUC in any State. Feature Group D accounts for at least 99% of interLATA calls, but FGB trunks can still be found. > BTW, the method of charges is entirely different for LD service in the > cellular industry. With cellular, it is not unusual for local cellular > carriers (RBOC's or otherwise) to provide FREE or flat rate termination > charges to LD carriers. Why not, if they extend the T1s to your MTSO? It's that many less erlangs going out on the other (paid) trunks. I assume the B carriers probally must provide this for free or are limited to some max rate by Da Judge (that's Greene, not Ito :-)) Patton Turner KB4GRZ pturner@netcom.com FAA Telecommunications ------------------------------ End of TELECOM Digest V15 #75 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa12167; 3 Feb 95 14:05 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA04134; Fri, 3 Feb 95 09:03:21 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA04124; Fri, 3 Feb 95 09:03:19 CST Date: Fri, 3 Feb 95 09:03:19 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502031503.AA04124@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #76 TELECOM Digest Fri, 3 Feb 95 09:03:00 CST Volume 15 : Issue 76 Inside This Issue: Editor: Patrick A. Townson Re: Cellular Fraud: How Much of it is Real Money? (Bruce Albrecht) Re: Cellular Fraud: How Much of it is Real Money? (Rob Boudrie) Re: GSM SIM Implementation (tuomo@aol.com) Re: U.S. 800 Subscribers and Freephone Issue (Linc Madison) Re: Technical Help Needed With Pending Litigation (Mark Fraser) Re: Cell Phone Programming - Follow-Up (Glenn Shirley) Re: Automatic Page Application Off of NT-SL1? (Rob Lockhart) Re: GSM SIM Implementation (David Mclauchlan) Re: CID Question (Mike Pollock) Re: Long Distance Caller ID/Cellphones? (Daniel Cayouette) Re: Old Phone Number Format Question (Michael Dillon) Re: Five Digit Phone Numbers (Kimmo Ketolainen) Re: Ten Digit Dialing (Carl Moore) Reminder: Send in Those Biographical Sketches (TELECOM Digest Editor) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Fri, 03 Feb 95 00:00:23 CST From: bruce@zuhause.MN.ORG (Bruce Albrecht) Subject: Re: Cellular Fraud: How Much of it is Real Money? Paul Robinson wrote: > I'm going to raise an issue here because I think it relates to the > issue of why nothing beyond lip service seems to be done by carriers > about cellular fraud. > Let me explain that I'm not condoning the idea of cellular fraud, what > I want to do is discover exactly where the numbers for the amount is > coming from and what relationship to reality those numbers represent. > [TELECOM Digest Editor's Note: Does it matter, Paul? Does it really > matter? Should stealing someone's 'profits' be any less severe an > offense than stealing their actual cash? You may not be condoning cell- > ular phone fraud, but you sure know how to speak the language of the > phreaks and hackers. I'm not condoning the actions of cellular phone time thieves, they are exactly that. However, the phone companies have been known to grossly inflate the value of things stolen from them (for example, placing the value of documents in the tens of thousands of dollars, when they could be ordered from the appropriate departments for less than $100). My question is that if they are truly losing hundreds of millions of dollars a year to fraud, why aren't they switching to known technologies (e.g., GSM based) which have per call authentication using a random number query with an encrypted key response, when such systems have been available for several years in other parts of the world? If they really are losing $300 million or more a year, it must be cheaper to replace every single cellular phone with a more secure system than to let these losses continue to escalate. If most of this amount is funny money, "lost profits" that they never really expected to generate, and use of excess capacity, then are the phone companies crying wolf? Are we currently in the position where the phone companies are like the suburban/rural household that never locks their doors "because crime never used to be a problem", and now screams for more police because they keep getting burglarized, but still never lock their doors? My main concern over cellular telephone fraud is that because it is partly due to decisions made by the phone companies, and that it's probably been exaggerated, that our government is either going to respond with excessive legislative and/or regulatory reaction to a technical problem, or with no action at all. Either way, it sends the wrong message. Bruce Albrecht (bruce@zuhause.mn.org) ------------------------------ From: rboudrie@phish.ecii.org (Rob Boudrie) Subject: Re: Cellular Fraud: How Much of it is Real Money? Date: 3 Feb 1995 06:36:13 GMT Organization: Center For High Perf. Computing of WPI; Marlboro Ma > sci.chemistry, comp.os. linux.announce, or even alt.angst! [Except > of course, when an AT&T PR man told the media that people from the > "network" (meaning comp.dcom.telecom) who were communicating and > complaining about the USA Today 800/900 incident were people who were > interested in "getting something for nothing". (Remember that Pat?)] I remember this very well. I originally reported the AT&T misbilling to Adam Gaffin, {Middlesex News} (Framingham, MA) technology reporter. Adam did a good job of getting his facts straight (and even quoted me accurately), though AT&T spokescritter Rick Brayall obviously does not understand what the Internet/Usenet is. He actually refered to Usenet as a "clandestine network". (or some similar term). Adam Gaffin correctly mentioned that AT&T's Bell Labs were connected to the network. Most amusing was Brayall's assertion that people should not have called that number since it was never listed or advertised. rob boudrie rboudrie@ecii.org [TELECOM Digest Editor's Note: I wonder where Adam has been lately? We used to get some very nice articles from here here once in awhile, but not for a long time now. PAT] ------------------------------ From: tuomo@aol.com (Tuomo) Subject: Re: GSM SIM Implementation Date: 03 Feb 1995 00:56:44 -0500 Organization: America Online, Inc. (1-800-827-6364) Reply-To: tuomo@aol.com (Tuomo) > And this totally ruins one of the nice purposes of the SIM: being able > to have several phones (for instance, one nice vehicle mounted phone, > and a hand held terminal) and still using them with one SIM only. If > two of your phones use different types of SIM, you're out of luck! > I've been told that some companies were now selling adapters, but the > convenience of all this has yet to be seen. > Luckily, it seems that manufacturers have realized this and they now > offer small hand-held terminals that will take normal size SIM cards. > But of course, these models can't be really small, limited as they are > by the size of the card. Would could have guessed that credit cards > would finally happen to be too big? :-) There is a classical answer to this -- is the distance between your ear and mouth shorter tha that of a credit card? How about the size of your shirt pocket, inner pocket of a sport jacket /suit? If you look at how the phones have evolved (ove five years ) they are getting flatter and lighter but not necessarily smaller in diameter, so that you can still hold one to your face and talk (with the exception of a few of course ). Tuomo ------------------------------ From: lincmad@netcom.com (Linc Madison) Subject: Re: U.S. 800 Subscribers and Freephone Issue Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Thu, 02 Feb 1995 22:40:23 GMT Judith Oppenheimer (producer@pipeline.com) wrote: > As Bob discusses, the US number 1-800-FLOWERS would also be available > internationally (assuming the company was willing to pay for incoming > international calls) as +800-1-FLOWERS, and a hypothetical Irish > number 1-800-FLOWERS could be dialed internationally as +800-353-FLOWERS. > Since each country code would have its own domain within the overall > +800 number space, no collisions would be possible. > Of course, even this simple scheme could still run into the number > scarcity problem, since it presumes only a single free-phone area code > for each country. So perhaps the only fool-proof plan is to just use > +800- as a prefix to the entire national toll free > number, area code and all. > Under this method, the US and Irish examples above would become +800 1 > 800 FLOWERS and +800 353 800 FLOWERS, respectively. There is also the problem that freephone numbers in Ireland are not in "area code" 800, they are dialed with the "special access code" 1800. That's 1800, *not* 1-800. The difference is that a hypothetical 800 area code would be dialed as (0800). Of course, Ireland won't ever put into service an area code 800; my point is that the 1800 access code is not treated the same as an area code. In the US, '800' is treated the same as an area code. In Ireland, 1800 is a special code like 153 for directory inquiries or 112 for emergencies. At any rate, that's what Telecom Eireann will tell you. (I'm not sure if 153 is the correct number or if 112 is in service yet.) My thoughts on the more general subject: (1) +800 XXX XXXX is too absurd to even contemplate. A seven-digit numberspace is far too small. Even eight digits is questionable. (2) With an eight- or nine-digit number, numbering spaces (not necessarily transparently related to the country code) could be reserved for existing subscribers. This seems a desirable option. Linc Madison * Oakland, California * LincMad@Netcom.com ------------------------------ From: mfraser@vanbc.wimsey.com (Mark Fraser) Subject: Re: Technical Help Needed With Pending Litigation Date: 03 Feb 1995 05:37:12 GMT Organization: Wimsey Information Services I can't provide evidence or anything concrete, but was given reason to believe that Northern Telecom's switches may be vulnerable via the Signaling System 7 path. Rumor had it that the SS7 implementation was partly responsible for the massively expensive software rewrite that was begun a couple of years ago; ISDN has been curiously delayed in NT territory; support of some "user" data packet functions over the "D" channel were/are absent apparently, and there seemed to be quite a lot of smoke generated whenever questions on these topics were raised. On SS7, calls from here [Vancouver] to Ottawa curiously generated ringback and answers, even, within hundreds of milliseconds of dialing the last digit [well, seconds for an answer] during the period when SS7 was *NOT* going to be introduced for "a long time". Tweren't MF signaling that got THOSE fast results ... I'd be inclined to follow that route. Mark ------------------------------ From: shirleyg@stanilite.com.au (UL ENG) Subject: Re: Cell Phone Programming - Follow-Up Date: 03 Feb 1995 02:11:34 +1100 Organization: Stanilite Electronics Pty. Ltd. Sydney, Australia amcphail@hookup.net (Alex McPhail) writes: > I posted an article a while ago, but haven't had any luck yet (except > to hear from others that they too would like the same information). I > am looking for how to re-program a cell phone's phone number for the > TechnoFone and the Motorola FlipPhone cellular phones. > If anyone as any information about this, or knows where I can look, I > would appreciate a reply. As I work with the air interface side of cellular systems I have programming information about numerous different makes of phones. These have always been aquired when new phones have been given to myself and the other engineers here for testing or to take to foreign countries with our systems. As far as I know there has never been any non-disclosure type agreements signed or even mentioned for any of these (but I'll have to check the data sheets to check there's not something there). While I have no intention of giving anyone this information is there anyone out there who know what the legal situation is? Is non-disclosure inherent in the information? Should they (the cellular phone companies) have got me to sign an agreement? Have the techies at the local service providers broken the law giving me such information? Or is this information just freely available to everyone? Thanks in advance, Glenn [TELECOM Digest Editor's Note: Well, its not quite *freely* given. You can purchase technical literature on most cellular phones which will tell you everything. For example, Radio Shack Technical Support in Texas has manuals on all the phones they sell which they will be happy to part with for fifteen dollars or so; have your major credit card ready when the operators who are standing by take your call. Motorola has the same kind of technical stuff available for purchase. PAT] ------------------------------ From: rlockhart@aol.com (RLockhart) Subject: Re: Automatic Page Application Off of NT-SL1? Date: 02 Feb 1995 23:21:55 -0500 Organization: America Online, Inc. (1-800-827-6364) Reply-To: rlockhart@aol.com (RLockhart) Ken Stone wrote: > I have an application where I need to generate a numeric page when a > phone number is dialed. We have an emergency number here on site that > when called rings a series of "red phones" around the site at key > people's desks. What I would also like to do is generate a page to > these same people when the emergency number is dialed. If this is truly an emergency situation requiring a page, then you'd probably be better off sending an alpha page. There is no standard or relatively reliable method of sending a numeric page by computer. At least using the alpha page entry protocol, you'll know you got the message *to* the paging system. Using DTMF to blind-dial a numeric page, relying only on delays to get the message into the terminal, won't give you any positive handshake. Rob Lockhart, Resource Manager, Interactive Data Systems Advanced Messaging Systems Division, Paging Products Group Motorola, Inc. Desktop I'net: lockhart-epag06_rob@email.mot.com Wireless I'net (<32K chars): rob_lockhart-erl003e@email.mot.com ------------------------------ From: davemac@adam.com.au (david mclauchlan) Subject: Re: GSM SIM Implementation Date: 03 Feb 1995 11:33:55 +1030 Organization: ADAM Pty Ltd I'm not so sure guys. When I subscribed to Optus Digital here in Australia (GSM) and received my SIM card, I was given the credit card sized part left over from when they punched out the actual SIM chip. I have a Nokia phone which uses the Micro-SIM, but if I wanted to use say the Motorola 7200 Gold which uses the credit card sized SIM, I can replace the Micro-SIM in the credit card sized holder with no problem. Plenty do that here I believe. Fidonet: 3:800/805 CompuServe:100236,420 David McLauchlan Internet: 100236.420@compuserve.com davemac@adam.com.au (preferred) ------------------------------ From: pheel@panix.com (Mike Pollock) Subject: Re: CID Question Date: 02 Feb 1995 18:28:41 -0500 Organization: PANIX Public Access Internet and Unix, NYC Dave Levenson (dave@westmark.com) wrote: > Stan Schwartz (stanschwartz-aviswizcom@e-mail.com) writes: >> I have recently begun using TotalTel as a secondary LD carrier (by >> signing up for secondary service and a calling card). >> HOWEVER ... if I dial 10081 + NPA + NXX + XXXX, the call is completed >> with CID information provided at the receiving end! Any ideas on what >> they are doing here? >> On their 800 service, TotalTel also seems to translate the ANI of the >> calling party and delivers it as CID information on the receiving end. > This is just a guess on my part, but this sounds very similar to the > service we get using Cable & Wireless. Could it be, perhaps, that C&W > and TotalTel are both reselling WillTell service? WillTell is the > company most often described in this digest as providing Inter-LATA > delivery of ANI via CID, or something like that. TotalTel USA maintains their own network; they are not a reseller. On both inbound 800 and outbound direct dial service, TotalTel takes ANI info and translates it to CID, so if you call someone over TotalTel, even if your area is not CID-capable, your ANI info will be captured and translated and will show up on the callee's CID box. Mike ------------------------------ From: daniel cayouette Subject: Re: Long Distance Caller ID/Cellphones? Organization: BNR Ltd., Ottawa Date: Thu, 02 Feb 1995 17:03:57 GMT In article dskidmo@halcyon.com (Don Skidmore) writes: > In article , zawada@ncsa.uiuc.edu says: >> Does the NT DMS-100 (with the proper software of course) support SS7? >> I find it hard to believe that there is no SS7 capability for the >> DMS-100 ... can someone prove me wrong? > If not, a lot of us are going to be out of luck. I am counting on the > new rule to improve my experience re your next question -- hope it's > not in vain. The DMS-100 has had SS7 capability since the 1985-87 time-frame through the MSB7 and now through the LPP peripherals. >> Can anyone address how the new rules affect cell-phone calls? All >> cellphone calls report "out of area" around here. Presumably this is >> because the cellphone customer has to pay air charges for all calls. >> Will they have to pass CID info under the new rules? Refer to the 'Notice of Proposed Rule Making' that discusses Wireless and PBX E911 in http: //fcc.gov:70/0/Daily_Business/1994111/ntcc4002.txt - CC-docket No. 94-102. Industry comments are scheduled for Feb 8 '95. To paraphrase a bit, '... there currently is no uniform means for ensuring that this information [CID and location info from wireless terminals] reaches emergency services personnel.' The FCC has set some basic guidelines and is asking the industry to come up with such a standard to meet these guidelines. Daniel Cayouette Ottawa, Ontario Daniel.Cayouette@bnr.ca ------------------------------ From: michael@junction.net (Michael Dillon) Subject: Re: Old Phone Number Format Question Date: Fri, 03 Feb 1995 00:10:44 -0500 Organization: Okanagan Internet Junction, Vernon B.C., Canada In article , wrote: > Quoting Andrew C. Green >> The following question appeared recently in the Old Time Radio >> Digest mailing list, and seems tailor-made for an answer from this >> forum. >> From: "Richard M. Weil" >> The number for the store in Rockford was curiously 8-22-47. I'm >> too young to know anything about 5 digit phone numbers. Is that >> how it was back then in small cities? Too young, eh? In the early 1970's I lived near Moonstone, Ontario in Canada. At the time we got phone service from the Moonstone Telephone Company which was bought by Bell in 1972 I believe. Before Bell came in, our number was 33-W-21. The way it was explained to me was that 33 was our line number, i.e. the 33rd wire coming into the exchange. Each line had two sides to it, the J side and the W side (ADSL?) and our ring was 21, i.e. two longs and a short. I remember visting the switchboard with my mother, who was a friend of the night operator and the plugboard was wood, with large black plugs just like those seen in old photographs. Michael Dillon Voice: +1-604-549-1036 Network Operations Fax: +1-604-542-4130 Okanagan Internet Junction Internet: michael@junction.net http://www.junction.net - The Okanagan's 1st full-service Internet provider ------------------------------ From: Kimmo.Ketolainen@utu.fi (Kimmo Ketolainen) Subject: Re: Five Digit Phone Numbers Organization: Turun yliopisto - University of Turku, Turku, Finland Date: Fri, 03 Feb 1995 16:54:00 GMT A related note: the Finnish GSM network operator Radiolinja is giving away four and five digit phone numbers for private cellphones on their network. The full format, thus is 950 xxxx or 950 xx xxx (what a waste of numbering space?). To acquire a number of this lenght one has to be a shareholder of the company. One share costs 5000 FIM, about 900 USD. Kimmo Ketolainen University of Turku home +358 21 237 8227 Yo-kyl=E4 84 A 10 Kimmo.Ketolainen@utu.fi shoe +358 40 500 2957 FIN-20540 Turku http://www.utu.fi/finland.html work +358 21 262 1496 ------------------------------ Date: Fri, 3 Feb 95 4:00:19 GMT From: Carl Moore Subject: Re: Ten Digit Dialing Wes Leatherock writes: > One-plus dialing in those exchanges does not indicate that an > area code follows, but that the call is a toll call. (Of course, now > that an area code is required on all One-Plus dialing, there will be Contradictory! Leading 1 DOES mean area code follows. On another note: Maryland and the Washington DC area also have the ten-digit-for-local-to- different-area-code scheme (you discussed Dallas/Fort Worth, and another message discussed the 416/905 border near Toronto). tadc@seanet.com (Tad Cook) writes: > In the rest of North America, we are having to dial the area code for > all long distance calls within the area code, so that the system can > handle the new area codes that look like prefixes. With the leading 1 before area code. But some states (California, Pennsylvania, New Jersey, New York, and at least optionally in New Hampshire) the published instructions say to dial just the seven digit number for long distance within area code. What had to go away was 1 + seven digits. (There are some non-Bell points in Pa. that are using the 1 + NPA + 7D for toll-within-NPA calls.) 4sam3@qlink.queensu.ca (Scott Montague) writes: > implementing this system across area codes that don't necessarily need > it, like the 604-905 boundary. What 604/905 boundary? 604 is British Columbia. Did you mean 905/705 and/or 705/807? By the way, I wrote of the ten-digit scheme (see above) for some local calls originating in Maryland and going to other area codes. But other local calls from Maryland (to Pa., Del., W.Va. and to one exchange in eastern-shore Va.) still are just seven digits. The ten-digit scheme was implemented in the DC area to relieve a prefix shortage there, and replaced the seven-digit scheme; and you have that ten-digit scheme near Toronto for similar reason. mcardle@paccm.pitt.edu (Terrence McArdle) writes: > Just for clarification's sake, I assume the phrase "local numbers that > are in a different phone number" means dialing a destination existing > in separate exchange, but the same area code, as the originator? > Calls that cross a LATA boundary currently require eleven digit > dialing, do they not? I think you meant "local number in a different area code". LATA boundaries don't always follow area code boundaries. I think 609 in New Jersey is split between two LATAS, with long distance within 609 being just seven digits. ------------------------------ From: TELECOM Digest Editor Subject: Reminder: Send in Those Biographical Sketches Date: Fri, 3 Feb 1995 08:30:00 CST This is just a reminder to all that the Telecom Archives now has a section called 'profiles' where reader/participants who have chosen to do so have a short biographical sketch of themselves on file for other *participating* readers to see. The way it works is this: You send the two or three paragraph sketch of yourself to 'ptownson@eecs.nwu.edu'. This can be something like who you are, your educational and professional background, your age and personal interests, etc. It gets installed in the profiles section of the Archives and you in turn get the needed password to access that directory and read about the other telecom people who have submitted the same. The profiles directory is *NOT* accessible using FTP or other services. It can *only* be accessed using the Telecom Archives Email Information Service, and then only by supplying the correct password within the text of your email. In return, you get the desired profiles of other participants sent back to you by the email server. This is designed to protect the privacy of all who wish to participate. You must provide data about yourself in order to read the data of others. This is intended as a 'human resources' sort of thing; a way for people in the telecommunications industry to get in touch with others with desired job-related skills. It is also intended for Digest readers to get aquainted with others who write in the Digest from day to day. I install these profiles as quickly as possible when they are received and by return mail you get a reply from me when your profile is in place along with instructions on how to access the other profiles. Quite a few readers have sent these in; how about you? PAT ------------------------------ End of TELECOM Digest V15 #76 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa18722; 3 Feb 95 21:20 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA20407; Fri, 3 Feb 95 16:46:16 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA20401; Fri, 3 Feb 95 16:46:13 CST Date: Fri, 3 Feb 95 16:46:13 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502032246.AA20401@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #77 TELECOM Digest Fri, 3 Feb 95 16:46:00 CST Volume 15 : Issue 77 Inside This Issue: Editor: Patrick A. Townson Book Review: "Online with Procomm Plus for Windows 2" by Wolfe (Rob Slade) MCI Strikes Again (Mike Jenkins) NIST Workshop on Synchronization in Telecom (Marc A. Weiss) MCI Gave me a Deal (Glen Ecklund) France Telecom as a Real Caller ID Provider (JeanBernard Condat) Re: Adoption of New Technologies (J.P. Wollersheim) Adoption of Technology Products (sb@interamp.com) Re: Ten Digit Dialing (Evan Champion) Facsimile Protocol Analyzer Demo Program Available On-Line (Mike Rehmus) Re: LD Termination Fees to RBOCs (rta) Re: Stand-alone Fax Box For PC (Kyle Cordes) Re: Old Phone Number Format Question (Tony Harminc) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Fri, 03 Feb 1995 13:48:42 EST From: Rob Slade Subject: Book Review: "Online with Procomm Plus for Windows 2" by Wolfe BKOPPL2W.RVW 941212 "Online with PROCOMM PLUS for Windows 2", Wolfe, 1995, 0-471-10612-7, U$22.95 %A David Wolfe david.wolfe@mecheng.fullfeed.com %C 605 Third Avenue, New York, NY 10158-0012 %D 1995 %G 0-471-10612-7 %I John Wiley & Sons, Inc. %O U$22.95 800-CALL-WILEY 212-850-6630 Fax: 212-850-6799 Fax: 908-302-2300 %P 370 %T "Online with PROCOMM PLUS for Windows 2" If you find the documentation for Procomm Plus for Windows 2 to be difficult, this may present an alternative. Wolfe's material is technically sound, but the utility is sometimes questionable. Chapter three, "Telecommunications Principles", is correct but disjointed. Chapter nine, on writing Procomm scripts, gives much detail on the script editor but nothing on the "Aspect" script language, itself. Quite acceptable replacement documentation if you don't need the script language. copyright Robert M. Slade, 1994 BKOPPL2W.RVW 941212. Permission granted for distribution in TELECOM Digest and associated publications. Vancouver ROBERTS@decus.ca Institute for Robert_Slade@sfu.ca Research into rslade@cue.bc.ca User p1@CyberStore.ca Security Canada V7K 2G6 ------------------------------ From: jenkins@visar.wustl.edu (Mike Jenkins) Subject: MCI Strikes Again Date: 3 Feb 1995 20:46:45 GMT Organization: Washington University School of Medicine The moral of the story is DON'T MOVE. Last April, we moved from St. Charles, Missouri to Hillsboro, Missouri. Not far, only 65 miles. I had contacted SouthWestern Bell to get a new number, a local number. No problem. Our long distance carrier for the previous three years was Telcom*USA. I had explained that I wanted this to remain as it was. In Hillsboro, we got our first bill. Along with a bill from MCI for long distance calls. We had NEVER contracted with MCI. Our LD company was bought by MCI, but bills us separately. First I called SouthWestern Bell, then MCI, then SWB, ... Turns out the previous "owner" of the phone number had used MCI, but had neglected to stop the service when she moved. Six months and 30 phone calls later, I contacted the PSC. With that kind of help, it appeared to be straightened out ... until last month. With the SWB bill came another MCI bill -- in a chopped-up version of my wife's name (the original name we had the old number under!). I called MCI. "No problem, we'll fix it right away." I did tell them that if I got another bill from them, I'd call the PSC and, probably, the State's Consumer Affairs Division for an in-depth investigation. Which I will. Eight months of listening to two companies declare "It's not my fault. Call the company." What happened? 1) Southwestern Bell dropped the ball in not closing the previous user's accounts when the number was closed. They did not inform the LD carrier. 2) Southwestern Bell didn't check the billing statement to notice TWO different names on the statement. 3) MCI missed the boat. When I called, they seemed to think nothing of the fact that the long-distance service was not in my name. 4) Telecom*USA, when informed of the whole proceedings, declared that I had a "$5 minimum usage" charge on my acount. When in reality, I didn't. 5) Southwestern Bell AND MCI don't compare notes when user's start complaining about mis-billing. Only when state agencies get in the act, do they begin to resolve the problem. Is it over? I don't believe it will end until the PSC gets involved again. This is a time that makes me wish there were two local companies. That way the competition would force them to be as caring of their users as they are about their money. On the other hand, I believe that Murphy was an optimist. Michael W. Jenkins Computing Support Services Dept of Internal Medicine Washington Univ. School of Medicine Old Childrens Annex, Room 621 St. Louis, MO 63110 314/362-8238 ------------------------------ Date: Fri, 3 Feb 95 10:04:36 MST From: mweiss@central.boulder.nist.gov (Marc A. Weiss) Subject: NIST Workshop on Synchronization in Telecom NIST TIME AND FREQUENCY DIVISION WORKSHOP ON SYNCHRONIZATION IN TELECOMMUNICATIONS SYSTEMS FEBRUARY 22-24, 1995, BOULDER, CO SEMINAR REGISTRATION FEE - $850 WHO SHOULD ATTEND This workshop is designed for engineers, systems analysts, and technicians who work with synchronization and syntonization of equipment using timing signals. There will be a focus on specific problems from the telecommunications industry. WORKSHOP TOPICS Timing Distribution in Telecom; Needs and History; Time and Frequency Concepts and Techniques; Network Noise Sources and Clock Requirements; Architectures for Network Synchronization Synchronization and Noise; Measurement in the Network; Anomalous Behavior Detection and Correction; New Techniques for Phase Noise Measurement; Time Transfer: Telephone, Internet, Loran-C and GPS; Tour of NIST Labs. GENERAL SEMINAR QUESTIONS TECHNICAL QUESTIONS Wendy Ortega Marc A. Weiss TEL: (303) 497-3693 TEL: (303) 497-3261 FAX: (303) 497-6461 FAX: (303) 497-6461 Email: ortegaw@boulder.nist.gov Email: mweiss@boulder.nist.gov Marc A. Weiss, Ph.D. Phone: 303/497-3261 NIST Time and Frequency Division FAX: 303/497-6461 MS 847.5, 325 Broadway, Boulder, CO 80303 Working in Math and Physics of Time Transfer, Time Series Analysis & Algorithms Specializing in GPS and Telecom ------------------------------ From: glen@cs.wisc.edu (Glen Ecklund) Subject: MCI Gave me a Deal Date: 3 Feb 1995 17:50:09 GMT Organization: University of WI, Madison -- Computer Sciences Dept. MCI called yesterday, and made me an offer I didn't want to refuse. 50% off on all calls for six months. After that, 50% off on calls to MCI customers (no list required) and 25% off (if I recall correctly) to everyone else. Glen Ecklund glen@cs.wisc.edu (608) 262-1318 Office, 262-1204 Dept. Sec'y Department of Computer Sciences 1210 W. Dayton St., Room 3355 University of Wisconsin, Madison Madison, Wis. 53706 U.S.A. ------------------------------ Date: 03 Feb 1995 17:26:25 GMT From: JeanBernard_Condat@email.FranceNet.fr (JeanBernard Condat) Organization: FranceNet Reply-To: JeanBernard_Condat@email.FranceNet.fr Subject: France Telecom as a Real Caller ID Provider Bonjour, In France, a phone number is a list of 8 digit called ABPQMCDU. For Paris and the towns near Paris, it's a zone code ("1") called Z in the telecom language. My pro phone number is: 147874083. If I dial this phone number from my home (to ask my phone answer machine, e.g.), I can have the indication of my phone call (date, time of beginning of the phone call, duration, type of pricing) with the ZABPQ (14787 in my case). The poor MCDU (4083, my direct extension) will be masked intentionnally. Today, France Telecom announced that the C.N.I.L. (Commission Nationale Informatique et libertes), playing as a computer privacies regulatory group of experts, had been authorized to give at the end of 1995 the complete phone number on all billing document: 147874083 in my case. It's marvelous. All month, I can be able to have the complete phone number of all my girl-friend's friends ... without having to ask them. Jean-Bernard CONDAT +33 1 47874083, desk 47874949 IPA Groupe SVP fax +33 147878822 JeanBernard_Condat@email.FranceNet.FR telex 233999 S V P F B.P. 155, 93404 Saint-Ouen Cedex, France Pager Kobby: 06 49 09 52 ------------------------------ From: JP Wollersheim Subject: Re: Adoption of New Technologies Date: 3 Feb 1995 19:11:33 GMT Organization: Hewlett Packard sb@interramp.com (sb) wrote: > 1) Pointers to other articles/books that deal with this topic; Fischer Pry have done a great deal of work in the difussion of technology. Very basically, there is a formula that will resemble an S-shaped curve, and given the first few data points, the model uses a regression technique to show hot the technology will be diffused into the marketplace. The model is as follows: 1) Enter first few data points (called 'f') 2) take ln(f/1-f) 3) do a linear regression on the datapoints, and extend it out 4) do exp(of the datapoints) / 1 + exp(of the datapoints) Those points are the prediction of how the technology will diffuse into the marketplace. If you need any further information, feel free to contact myself. I have done work in this and other model areas. Regards, JP Wollershim ------------------------------ From: sb@interramp.com (sb) Subject: Adoption of Technology Products Date: 3 Feb 1995 20:29:22 GMT Organization: PSI Public Usenet Link Hi, I'm writing an article on consumer adoption of new technologies over time. Ideally, I'm looking for sources (online, books, articles, people, etc), academic and business, that discuss the motivating factors behind why people do or don't start using new technology products, and if anyone has any "case studies" of the history of a product, like radio, or the fax machine, that would be wonderful to read also. Other topics are: What makes a product "take off"? Does anyone track this sort of stuff for technology products/services? I'm aiming to try and get some insight into what'll fly and what won't on the info superhighway, and this seems like a great place to begin -- tracking the histories of other products. If anyone has any ideas, please email them to me at "sb@interramp.com". Thank you for your time. Regards, Seth sb@interramp.com ------------------------------ Date: Fri, 3 Feb 1995 20:27:02 +0000 From: evan champion Subject: Re: Ten Digit Dialing Organization: Bell Northern Research 4sam3@qlink.queensu.ca (Scott Montague) wrote: > Bell Canada chose to have it's Toronto customers dial ten digit LOCAL > calls. This way, two exchanges can be used within a local calling > area. Example: If you wanted to dial 1050 CHUM Newsroom in Toronto > (416) from Pickering (905) (a local call) you would dial 416-923-1133. > This would allow the creation of a 923 exchange in Pickering, which > could be used for different customers. Inversely, to call someone > local in (905), you would dial 10 digits 905-xxx-yyyy to call them > from (416). This has already been implemented. The reason: Bell > Canada is concerned that they will run out of exchanges in 416, and > want to keep all 905 open for local calls. (Or else, 416 would have > to omit certain exchanges that their local calls are made to ... it's > so contrived ... and then when they run out again (which they will) > they'll have to implement the ten digit dialing; let's get it all > over with, they say). I believe that they now want universal dialing > procedures across area codes for their customers, and subsequently are > implementing this system across area codes that don't necessarily need > it, like the 604-905 boundary. It always starts with our neighbours in Toronto :-) Seriously though, I see the same sort of thing happening in Ottawa-Hull shortly. For example, I know that there are Ottawa 613-56x-xxxx and Hull 819-56x-xxxx which are local calls from each other (a favourite is a friend of mine who lives at 819-561-xxxx and works at 613-564-xxxx). I don't think it will be very long before the Ottawa side would like to take 613-561, and then we'll be forced in to ten digit dialing. > Always planning for the future, I guess. BTW, If you Americans want > an example of a world class phone company, look north to Bell Canada. > Great staff, instant repairs, easy access to all services (and tarrifs > :-) ), quickly resolved billing disputes, hardly ever any billing > errors, great business and residential service. >From the horror > stories in the US, I think some companies could learn alot from Bell > Canada. (OK, their long distance is a bit more expensive, but it's > worth it.) Besides the fact that they are hopeless for doing anything out-of- the-ordinary (ie: try calling them up and ask to talk to someone about ISDN or T1 service...), Bell Canada is a pretty good company. I am not rushing out to any of the new long-distance phone companies because Bell does the job for me. Now, if they would only increase my local calling area. And while we're talking about ten vs. eleven digit dialing, I like the '1' in front of long-distance calls just to denote that I understand that I will be paying for the call. No '1' would symbolize a local phone call, even if it required an area code. Evan ------------------------------ From: mrehmus@ix.netcom.com (Mike Rehmus) Subject: Facsimile Protocol Analyzer Demo Program Available On-Line Date: 3 Feb 1995 02:37:54 GMT Organization: Netcom We have a ftp site up and operating. Something of a prelude to our WWW layout sometime this month. You can download the file from: ftp.shell.portal.com. the file is in pub/mrehmus Or URL: ftp://ftp.shell.portal.com/pub/mrehmus I will probably get the Fax Emulator demo uploaded tomorrow. If you have any questions, please contact me at: Mike Rehmus Gray Associates 10760 Hubbard Way San Jose, CA 95127-2624 (408) 251-0263 (408) 251-0264 fax mrehmus@ix.netcom.com Best regards, Mike ------------------------------ Date: 03 Feb 95 00:20:16 EST From: rta <75462.3552@compuserve.com> Subject: Re: LD Termination Fees to RBOCs John Levine writes: >> Local should be charged higher because it is expensive. You provide >> unlimited free calling for a flat fee instead of charging on a call by >> call basis. Of course you lose money. > You're making the increasingly unwarranted assumption that local > bandwidth is expensive. I make lots of umpteen hour long calls > (computer to computer, of course) but since they're within the same > switch, I find it difficult to identify any basis on which this > actually costs the telco more than if I left the phone on the hook. Several issues are being raised here so let me try to sort them out. For FGD, many tariffs if you break them down, have a 1/3 the cost in switching, paying for COs and access tandems, 1/3 in transport, the bandwidth, and 1/3 in Common Carrier Line on the originating or terminating end, what the carrier pays to support (subsidize) the line to your home or business. This breakdown is approximate and varies from LEC to LEC, but it gives you the overall picture. Only about a third of the charge is for bandwidth as most of us would interpret the word. The other element is switching. Switching and the lines to the customer premises are really what is expensive. The lines are not heavily utilized, in the case of many small businesses and residences. Switches are expensive and are not set up to support multiple hour calls. Regular business calls that get through are typically 4 to 6 minutes in length with residential calls longer since many are placed to friends and family. Switches were engineered on the assumption that most calls would be short. As data usage increases, the switches have to get bigger, an expensive proposition or the multiple hour data calls will have to shifted to another technology, such as packet or cell switching where switches and long distance circuits are not tied up during think time. Most modern CO switches detect a phone that is off the hook and not transmitting and genrate an obnoxious tone to get you to hang up. Jerry Harder Senior Partner Renaissance Telecommunications Associates 75462.3552@compuserve.com ------------------------------ From: kcordes@crl.com (Kyle Cordes) Subject: Re: Stand-alone Fax Box For PC Date: 3 Feb 1995 11:32:33 -0800 Organization: CRL Dialup Internet Access yongtao@watnow.uwaterloo.ca (Yongtao Chen) writes: > I am looking for some kind of "stand-alone fax box" for PC. The box > should be able to receive and store coming faxes automatically when I The device will probably need a hard drive, memory, and a FAX modem. It would be nice if it also had a keyboard, screen, and maybe a mouse so it could have a neat interface. This is called a computer (sarcasm). Your box will probably consist of another PC (maybe an old, abandoned 286 ...) with a FAX modem in it, with some sort of networking hard/software so you can access its hard drive from your PC. It sure would be a lot simpler to leave your PC on; cheaper, too. Is there a reason you can't do this? With the monitor off, it consumes very little power. Kyle Kyle Cordes @ Automation Service kcordes@crl.com ------------------------------ From: Tony Harminc Subject: Re: Old Phone Number Format Question Date: Fri, 03 Feb 1995 16:00:00 CST michael@junction.net (Michael Dillon) wrote: > In the early 1970's I lived near Moonstone, Ontario in Canada. At the > time we got phone service from the Moonstone Telephone Company which > was bought by Bell in 1972 I believe. Before Bell came in, our number > was 33-W-21. The way it was explained to me was that 33 was our line > number, i.e. the 33rd wire coming into the exchange. Each line had two > sides to it, the J side and the W side (ADSL?) and our ring was 21, > i.e. two longs and a short. I remember visting the switchboard with my > mother, who was a friend of the night operator and the plugboard was > wood, with large black plugs just like those seen in old photographs. Small world department! I can remember standing in the Moonstone Telephone Company office, waiting to make a call to a friend who lived about a ten minute drive away, but was served from the Bell office at Port McNichol. This was 1970 or 1971, and the wait was for an 'outside line'. There were no payphones in Moonstone but since the office was right there in the centre of town, you just went in and asked the operator for your call and paid in cash. At the time, my friend's farm had been served by Bell (on a 4 party line) for only a couple of years. The old open wire on poles was still visible by the roadsides, collapsed in places. My friend still has the surprisingly modern crank phone that Bell left in his house when they installed the new line and standard 500 set. Moonstone was one of the last batch of Bell acquisitions of small rural telcos in the province. Now there are still a few 'ma & pa' telcos in Ontario, but they generally have all digital COs (DMS10s, typically), and are not interested in selling out. Tony Harminc ------------------------------ End of TELECOM Digest V15 #77 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa23826; 4 Feb 95 4:47 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA27923; Sat, 4 Feb 95 00:48:33 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA27917; Sat, 4 Feb 95 00:48:31 CST Date: Sat, 4 Feb 95 00:48:31 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502040648.AA27917@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #78 TELECOM Digest Sat, 4 Feb 95 00:48:00 CST Volume 15 : Issue 78 Inside This Issue: Editor: Patrick A. Townson How I Fooled Caller ID (John Combs) Sprintnet Question (Berton Corson) Substitute for BellSouth's Simon (Bob Baxter) Most Pressing Problems Facing Network Managers and Planners? (R. Jacobson) Video Dial Tone Information Wanted (pcohen@cpva.saic.com) South American Telecom News Wanted (Steve Samler) ANSI,ITU Information Needed (Edgar Murillo Montero) Directory Assistance Vendor Wanted (Steve Bauer) NYNEX Does it Again ... Not! (Tony Pelliccio) Can Anyone Recoomend Excell LD Phone Service? (Chris Telesca) Caller ID to TouchTones Help Needed (Lars Nohling) Memorex PBX Help Needed (Sergei Fishel) RS-422 - How Far at 1KHz? (Dave Dolomond) ATT 500 Number Working in PacBell-land Today (John Landwehr) OKI 1150 Cell Phone Help Wanted (Timothy F. Cooper) Very High Speed Wireless Communication Wanted (Yoji Hasegawa) Telstra (Australia) Information Wanted (britos@scf.usc.edu) ACD/Call Router Information Needed (T.J. Oconnell) Seeking Telecom Library (Dermot Wall) Re: Radio Station Transmission Lines (Alan Boritz) Re: 7/8ths Heliax Sources Needed (Jack Daniel) Re: 7/8ths Heliax Sources Needed (Mark Fletcher) Re: Who Are the Telephone Pioneers of America? (bkron@netcom.com) Re: Who Are the Telephone Pioneers of America? (John Skalko) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Fri, 3 Feb 95 22:16 EST From: Testmark Laboratories <0006718446@mcimail.com> Subject: How I Fooled Caller ID TELECOM Digest Editor mentioned in a recent TELECOM Digest that he thought a Caller ID box could be fooled if the Calling Party sent a burst of their own Bell 202-type modem tones the instant the Called Party answered. I decided to try this in our lab, and he's right! Standalone Caller ID boxes that display calling number, or calling number and name, "listen" all the time, and any time a valid incoming Caller ID comes in, they display it! I checked several brands, and they all behaved this way. Someone should alert the telcos and police, so innocent people won't be accused of prank calls. I can already think of several evil plots that could be made in movies of the week. However, I also had a couple high-end telephones handy which included the Caller ID feature, and they wouldn't accept a new Caller ID after going off-hook. The reason for this is both phones are ADSI Level 3, and they comply with the exhaustive Bellcore requirements. An ADSI Level 2 or Level 3 telephone that accepted Caller ID after going off-hook would fail some Bellcore tests. Unfortunately, an ADSI Level 1 or Level 2 device that wasn't a true telephone, e.g., a standalone Caller ID box, could still be fooled by an off-hook Caller ID burst, and the design would pass the Bellcore requirements. In case you're been muttering, "What the heck is ASDI," I'll give a brief explanation. The acronym stands for Analog Display Services Interface, and it is a new type of telephone designed to work on a standard, analog telephone line. (POTS line, Plain Old Telephone Service) There are three "levels" of ADSI: Level 1: Calling name and number after the first ring. Level 2: Calling name and number with call waiting. Level 3: A telephone with a display screen. (The "D" in ADSI.) ADSI Level 3 came about because Bellcore did a study to determine how to sell more features on a telephone line, such as call waiting, or call forwarding. (The RBOCs like to sell these extra features as they are revenue above the standard line charge, and quite profitable.) The study concluded that many people didn't buy extra features because they didn't want to fool with code sequences to enable/disable features, such as *69. Bellcore's solution was ADSI. A Level 3 device has a screen that must be 20 characters across by 6 rows, and can be 40 characters across by more rows. There are from four to six "softkeys." Menu trees of softkeys can be downloaded to an ADSI phone, and stored in memory as a "script." The user gets plain English displays (or the language of your choice), and can press softkeys to activate telco features, or even order new ones directly from the phone! The REAL attraction of ADSI is that ANYONE can have their own ADSI server! After all, it's designed to work on analog lines. In a couple of years, a screen phone will be used to call the local video store, scroll through the new releases, and even reserve one for later pickup. Or, perhaps one could call Domino's, order a pizza and toppings. Just imagine calling a business, and instead of getting the tedious voice mail prompts telling you to press *1 to do something, you get a text screen that lets you scroll though a directory of employees and select who you want! The high end ADSI phones that I have tested even have things like pull-out QWERTY keyboards for data entry, PCMCIA Type I slots, "smart card" slots, and magnetic strip card readers! Bellcore deserves praise for this well thought out service, laid out in several Bellcore standards. Another smart move on their part is that they didn't bother submitting the standard to an international standards body to try to get it adopted. (We all know how long that takes.) Instead, they have been visiting the PTTs of dozens of countries, and trying to convince them to sign on to the ADSI standard as defined by Bellcore. Several European nations have expressed interest already, as have Pacific Rim nations, including China. ADSI is being field-trialed by a few RBOCS right now, including Ameritech in Chicago. Ameritech is selling high-end Phillips ADSI screen phones at cost for only $200 each, and primarily marketing it for enhanced banking features from your home, along with the ability to easily order/change custom calling features. It is estimated that there will be between 5 and 15 million ADSI Level 3 screen phones in North America by 1998, and I suspect the higher number is more accurate. Once you've tried one, you don't want to give it up! It is my opinion that ADSI, along with V.34 modems giving true 115 kbps data throughput (via compression), could be an ISDN BRI "killer" one-two punch. ISDN is STILL not ubiquitous, the local telcos don't understand it and don't sell or market it effectively, and it will NEVER be offered in the boondocks where I live. (Mayo, Kentucky) In closing, perhaps the Editor will permit a small plug for my employer. TestMark Labs is currently the ONLY alternative to Bellcore itself, if you want your ADSI product tested for compliance to the full Bellcore requirements. By the way, even though ADSI works on POTS lines, it qualifies as PANS. (Pretty Amazing New Stuff.) John Combs, Project Engineer, TestMark Laboratories, testmark@mcimail.com [TELECOM Digest Editor's Note: The thing to remember with Caller-ID is to look at the display *before* you answer, not afterward! Or if you do go back and review it afterward, do so in a discerning and sophisticated way. Bogus information sent down the line while you are in the process of going off hook and getting the phone to your ear probably won't look quite the same. For example, the time will probably not be shown, since telco usually sends this. I've never seen a CID box with its own clock. Even if there is a time sent with the bogus information, look to see if it is the same time as the real one. It would be highly unlikely you had two calls in the same 'minute'. Look to see if the one right before the one currently displayed says 'private' ... at the same minute in time yet! Keep your eye on the CID display as you take your phone off hook and bring it to your ear. Notice it suddenly change? It is hard to explain how or why, but after you have had CID for awhile its like when you are on the phone all day. You *know* what you are supposed to hear next in terms of ringing tones, etc. You'll get with CID to where you *know* what you are supposed to be seeing. Something different pops up and if you have sort of trained your eye to notice things, you *will* see that something does not look right; you will flip through the entries in the memory and sort it out. Even if the prankster has the sense to send the time stamp along, unless he has his clock synchronized with *your* central office's clock (your office supplies the time, not his) then his bogus entry may have a time one or two minutes *before* the real one. You would not have an entry in the display which came afterward but with a time prior to the one before it, and if you do, that's a giveaway. After a few calls with CID, you learn what to expect there and how, etc. PAT] ------------------------------ From: Berton Corson Subject: Sprintnet Question Date: Fri, 3 Feb 95 18:29:45 PST Patrick: Got a question. I'm drawing a blank here. In using Sprintnet, one types a 'C' followed by a destination to connect to another system. I forgot the destination I use to look up Sprintnet local phone numbers. I remember both passwords were 'PHONES' but the destination escapes me. Do you know??? Bert [TELECOM Digest Editor's Note: It seems to me the mystery word is 'MAIL'. I think you do 'C MAIL' then the password 'PHONES'. At one time I wrote an article for the net entitled 'Let Your Fingers do the Walking'. It was a long, detailed account of all the interesting connections you could get (at that time) depending on what you entered after the 'C'. I listed quite a few test numbers, loop-arounds, manual terminals with operators you could interactively chat with, etc. I listed in one part of my article novelty connections you could make to things like the British Telecom Master Clock, a master clock in Japan operated by whoever Telenet (the old name for Sprintnet) gatewayed with over there, etc. I included a bunch of addresses which connected to outdials of Canada Datapak. I mentioned some addresses which gatewayed into the old Western Union telex system and similar. Telenet saw the article and stunk up the place something awful. They took particular umbrage to the fact that I mentioned that the old PC Pursuit accounts were not blocked out from reaching those international destinations. I also mentioned the numeric addresses for the indials themselves, and told cryptically how 'some hackers' would call into thier local Telenet indial, do 'C address.of.same.indial.in.rotary.hunt.group' and then sit there on the line *and provide a bogus Telenet prompt* to some unfortunate sucker who also dialed in, thus capturing the password of some unsuspecting user. In other words, let us say there are ten lines in a rotary hunt incoming to Telenet (Sprintnet) via ummm ... let's say Chicago-Merrimac office, or Chicago-Irving office. You call in on line one; do 'C address.of.these.outdials'. Since line one is occupied naturally -- by you -- your C request would hunt to line two and there you would sit. Now comes another inbound call and the telco CO parks him on line two, staring you right in the face looking at him. You see him give those carriage returns to get Telenet's attention, and *you* answer him asking for his password. Like a dummy, he types it right in. You say 'sorry, network problems, please disconnect and dial back again.' He hangs up, you hang up and split. Now you have a password. I kid you not. More PC Pursuit passwords and Telenet network passwords were stolen by that gimmick than any other scheme. Telenet finally wised up and put their incoming lines in one hunt group and their outgoing lines (outdials) in another group with a network restriction so users could not connect to the incoming lines. If you try doing 'C a.dialin.somewhere' now the network responds saying the address you have entered is not in service for incoming connections (from persons already on the network). I promised them I would not again publish 'Let Your Fingers do the Walking' so that's the way it has to be. Anyway, try 'C MAIL' with user name PHONES and password PHONES. PAT] ------------------------------ Date: Fri, 3 Feb 1995 12:41:07 EST From: Bob Baxter Subject: Substitute for BellSouth's Simon My company is looking for a device that is similar to the Simon unit put out by BellSouth. Basically, the Simon is a combination cellular phone, and personal digital assistant rolled into one. According to the customer service reps, Simon is the only device of its type. Is this correct? If anyone has other information, or telephone numbers to call for information, it would be appreciated. Virtually yours, bobbles@panix.com Bob Baxter p00284@psilink.com ------------------------------ From: cyberoid@u.washington.edu (Robert Jacobson) Subject: Most Pressing Problems Facing Network Managers and Planners? Date: 3 Feb 1995 19:03:46 GMT Organization: WORLDESIGN, Seattle What are the two or three most pressing problems facing you now and in the near future? Growth? Access? Interface for controls? For a short report I'm preparing, I'd like to hear from network managers and planners. Thanks. Email is fine. Bob Jacobson Worldesign Inc. ------------------------------ From: PCOHEN@CPVA.SAIC.COM Subject: Video Dial Tone Information Wanted Date: 3 Feb 95 11:31:21 PST Organization: Science Applications Int'l Corp./San Diego I am looking for information on the following topics regarding Video Dial TOne: 1. FCC grants permission for telephone companies to offer video services. 2. FCC begins rulemaking on Telco video programming. 3. 1984 cable communication policy acts restrictions on Telcos providing video programming to subscribers declared unconstitutional. 4. Regional Bell Operating Companies are running trials for video dialtone services. Please send your responses to my email address (pcohen@cpva.saic.com) Thank you! ------------------------------ Date: Fri, 3 Feb 1995 16:29:13 EST From: Steve Samler Subject: South American Telecom News Wanted Does anyone know of any sources for S. American/Central America/Mexico telecom/datacom news? Looking for something that might provide three to five stories per day. ------------------------------ Date: Fri, 3 Feb 1995 11:32:21 GMT From: Edgar Murillo Montero Subject: ANSI, ITU Information Needed I'm looking for SDH, ATM, Frame Relay Recommendations on ANSI, ITU, etc. Please tell me where can I find these topics. Ing. Edgar Murillo Montero Phone: (506) 287-0446 Of. Desarrollos Telematicos Fax: (506) 257-0514 Radiografica Costarricense S.A. E-Mail: emurillo@sol.racsa.co.cr P.O. Box 54-1000 San Jose Costa Rica, Central America ------------------------------ Date: Fri, 3 Feb 1995 16:33:33 CST From: Steve Bauer Subject: Directory Assistance Vendor Wanted I am looking for a vendor who can provide me with up to date Directory Assistance data for the United States that can reside on a LAN and be accessed by any user. I'm not sure if a CD-ROM that is updated frequently is the way to go or an on line connection with a per request charge. We have about $3,000 per month in Directory Assistance charges. Thanks, Steve ------------------------------ From: Tony_Pelliccio@brown.edu (Tony Pelliccio) Subject: NYNEX Does it Again ... Not! Date: 3 Feb 1995 15:56:52 GMT Organization: Brown University -- Providence, Rhode Island USA I just saw mention in the {Providence Journal Bulletin} for February 3, 1995 that the Rhode Island Public Utilities Commission has ordered NYNEX to stop offering Caller-ID services until a problem with blocking has been rectified. According to the article the problem exists with customers who've requested their lines be permanently blocked. The *67 option is still available and customers who currently have Caller-ID will be able to retain the service. In a related blurb they state that the same problem exists in NYNEX's New York offices. Just another fine example of NYNEX doing what they do best. Tony Pelliccio, KD1NR Box 1908, Prov, RI 02912 Tel. (401) 863-1880 Fax. (401) 863-2269 [TELECOM Digest Editor's Note: Someone else wrote me to say Nynex has now admitted the problem, (ID was being passed anyway, despite blocking) and is working on getting it fixed. They have offered new non-pub phone numbers at no charge (service/installation) to anyone affected who wants it. PAT] ------------------------------ From: sascjt@unx.sas.com (Chris Telesca) Subject: Can Anyone Recommend ExcelL LD Phone Service? Date: Fri, 3 Feb 1995 14:49:33 GMT Organization: SAS Institute Inc. A friend of mine and her mother are Marketing Reps for Excel LD phone service. They say that they can save me a significant amount of money over AT&T, my current LD carrier. Their examples are the differences in charges for one-minute phone calls. EXCEL has lower flat rates, while AT&T charges more for the first minute, but they virtually are identical for longer calls (avg. time: 10 minutes). EXCEL also charges a $3.00 flat fee for their service. Of course, since this is a MLM operation, my friend and her mother will be collecting commissions on my phone bill. So it seems that what I'm really being asked to do is switch over to a service that is no better (and hopefully no worse) than the one I'm using now, that may or may not save me money, but will shift some of the money that used to go to Southern Bell and AT&T over to my friend and her mother. Not that I have anything against doing that, but does anyone without a financial stake in EXCEL have any real-life experiences with this service? Is their any real savings over AT&T? How does their customer service deal with billing problems, wrong numbers, unauthorized people using your calling card number, etc? Chris Telesca Associate Photographer (919)677-8001 x7489 SAS Institute Inc. / SAS Campus Dr. / Cary, NC 27513 / sascjt@unx.sas.com ------------------------------ Date: Fri, 3 Feb 95 10:28 EST From: Lars Nohling Subject: Caller ID to TouchTones I am looking for a device that will taking the incoming Caller-ID number and enter it as touch tones to the answering modem before connecting the incoming call. I want to use it for routing calls based on the originating location. Any ideas? lnohling@mcimail.com Lars Nohling Business Systems Solutions, inc. ------------------------------ From: fishel@technet.sg Subject: Memorex PBX Help Needed Date: Fri, 03 Feb 95 19:00:52 WST Organization: ATS Technologies (Singapore) Hi there! Could you help me with small problem we having here? We are using Memorex's Telex 1001VS PBX system at office (Phone is 2021L). It is 6 wires. So here are a few questions I'd like to ask: 1. Why is it having 6 wires (Not 4 wires as usual PBX)? 2. Is there any 3rd party suppliers who could supply compatible hardware and software to this PBX. (Voice mail, OS, PCB...)? 3. Is there network address for Memorex Telex company (www, ftp,...)? Thank you in advance for any information. Sergei Fishel ------------------------------ From: dolomond@micronav.ca (Dave Dolomond) Subject: RS-422 - How Far at 1KHz? Date: 3 Feb 1995 12:05:16 -0400 Organization: MII Does anyone have any particular experience with RS-422? I need to know how far I can transmit a 1KHz signal using an RS-422 link with 24 AWG shielded, twisted pair cable burried underground? Any help would be appreciated !!! e-mail if you can... Thanks in advance, Dave D. (dolomond@micronav.ca) ------------------------------ From: John Landwehr Date: Fri, 3 Feb 95 09:45:09 -0800 Subject: ATT 500 Number Working in PacBell-land Today Just FYI, ATT activated my 500 number Jan 27. On Jan 31, PacBell still had no clue what 500 numbers were. I called repair and they thought I was an idiot and actually hung up on me. I was going to call the PUC today, but guess what -- my 500 numbers works. [TELECOM Digest Editor's Note: That's been my experience with Ameritech recently where 500 numbers are concerned. They just assume I am a crank caller and they humor me. AT&T says agreements were put in place with all telcos on January 28 and that 500 service is working just fine everywhere and that instead of bothering them further with it I should contact the Commission. I call the Commission, they say they have no record of any agreements being reached between AT&T and Ameritech to unblock 500. Like yourself, thus far I have found no one at Ameritech who knows anything about 500. Finally yesterday someone at AT&T told me the 'specialist' would look into it, and I had to tell her digit by digit exactly what number I was dialing and where I was calling from. The 'specialist' has not called back. Neither has anyone from the Illinois Commerce Commission. I told AT&T the easiest way was to simply disconnect my 500 number and get back to me with it sometime in the future if/when they got their act together. I can't keep bothering with it. PAT] ------------------------------ From: cftvgy1@teleport.com (timothy f. cooper) Subject: OKI 1150 Cell Phone Help Wanted Date: 4 Feb 1995 00:12:09 GMT Organization: Teleport - Portland's Public Access (503) 220-1016 I have recently purchased an OKI 1150 cell phone from my neighbor (moved away) and he gave me all the goodies like batteries, charger, manual and such. He told me his number was disconnected and I would need to get my own activation. What he didnt tell me is that he locked the phone with several security codes! Will I be able to erase this and start witha fresh phone? wWat are the ports for? (Programming i know). Can I get the software and cable to do it myself? Who sells this equipment? Will a dealer be able to reprogram the security codes? Help! ------------------------------ From: yhase@comm.mpt.go.jp (Yoji Hasegawa) Subject: Very High Speed Wireless Communication Organization: Computer Communications Div, MPT Date: Thu, 2 Feb 1995 10:39:45 GMT Does anyone know an experiment of very high speed (155Mbps or more?) communication by wireless measures anywhere in Germany? Please send any info by e-mail. Yoji yhase@comm.mpt.go.jp ------------------------------ From: britos@scf.usc.edu Subject: Telstra (Australia) Information Wanted Date: Fri, 03 Feb 1995 16:50:08 -0800 Organization: University of Southern California, Los Angeles, CA Looking for information on this company. Stock Analysis. Assets. Prognosis. History. etc ... ------------------------------ From: tjoconnell@aol.com (TJOconnell) Subject: ACD/Call Router Information Wanted Date: 3 Feb 1995 20:02:40 -0500 Organization: America Online, Inc. (1-800-827-6364) Reply-To: tjoconnell@aol.com (TJOconnell) We are looking for a resource for general information on ACD/Call Center technology. This could include an Overview Book on different systems, emerging technologies, or trends. Do you have any information or know of any sources that would help us "figure out" today's Call Centers? Please email: tjoconnell@aol.com Thanks, Tom ------------------------------ Date: Thu, 2 Feb 1995 09:19:53 +0000 From: dermot@nt.com Subject: Seeking Telecom Library Reply-To: dermot@ngals022.nt.com Organization: Northern Telecom, GALWAY, Ireland I'd be very grateful if anyone could forward me a phone number and fax number (non 1-800 please) for Telecom Library, Inc in New York. Please use the correct email address in the sig. Thanks for the help. Dermot Wall Dermot.Wall.dermot@nt.com Northern Telecom Phone: +353 91 733 334 Mervue Industrial Estate Fax : +353 91 756 050 Galway ESN : 570 3334 Ireland ------------------------------ Subject: Re: Radio Station Transmission Lines From: drharry!aboritz@uunet.uu.net (Alan Boritz) Date: Thu, 03 Feb 95 20:32:39 EST Organization: Harry's Place - Mahwah NJ - +1 201 934 0861 sterger@PrimeNet.Com (Alan Sterger) writes: >> I am working for a small radio station that is now using two 8kHz >> lines to feed four tansmitters (AM). On one line we feed three >> transmitters since they are for buildings next to each other; the other >> line is for a building some 150 blocks from here. > Are STLs out of the question? They are in New York City. Every allocated channel is occupied, though in a very inefficient manner. While it may be possible to free up at least one wide-band channel by forcing at least one of the larger FM stations to stop hogging more channels than they really should ;), the cost to accomplish it, and of real estate for microwave antennas, and for equipment expense, would make it difficult for even the largest broadcasters in the country. New York City is one peculiar congested place where private (non-switched) circuits can be cheaper than non-tariff'd alternative services. It's also probably the only place in the US that has a *vertical* mileage tariff for some telco circuits. ------------------------------ From: jdaniel@netcom.com (Jack Daniel) Subject: Re: 7/8ths Heliax Sources Needed Organization: Netcom Online Communications Services (408-241-9760 login: guest) Date: Fri, 3 Feb 1995 13:25:23 GMT In article md@pstc3.pstc.brown.edu (Michael P. Deignan) writes: > I need to find 350' of 7/8ths 50ohm heliax for an RF application I'm > working on. Cheapest I've been able to find is $4.50/ft. Anyone have > other source suggestions? Call Trilogy Cable at 1-800-874-5649. Ask for Larry Lindner and 1" low loss 50 ohm cable. Best buy in the world on NEW high spec cable. ------------------------------ Date: Fri, 3 Feb 1995 06:20:08 -0800 From: mfletch@ix.netcom.com (Mark Fletcher) Subject: Re: 7/8ths Heliax Sources Needed In V15 #73 md@pstc3.pstc.brown.edu (Michael P. Deignan) writes: > I need to find 350' of 7/8ths 50ohm heliax for an RF application I'm > working on. Cheapest I've been able to find is $4.50/ft. Anyone have > other source suggestions? I find the best cable is manufactured by: Andrew 10500 W. 153rd Street Orland Park, IL 60462 1-800-255-1479 1-800-349-5444 FAX Another supplier is: Times Microwave Systems PO Bos 5039 Wallingford, CT 06492 800-TMS-COAX or 203-949-8400 203-949-8423 FAX Either will provide you with a list of distributors in your area. Also consider subcribing to Mobile Radio Technology (MRT). The subscription is free for qualified individuals. MRT PO BOx 12937 Overland Park, KS 66282-2937 Mark Fletcher ------------------------------ From: bkron@netcom.com (BUBEYE!) Subject: Re: Who Are the Telephone Pioneers of America? Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Fri, 3 Feb 1995 02:02:28 GMT Jonathan Prince writes: > [What is] the 'Telephone Pioneers of America'? > [TELECOM Digest Editor's Note: ... the Telephone Pioneers of America > is an outstanding organization with chapters at telcos all over the USA ... Another interesting fact is that Telephone Pioneers of America is the largest philanthropic organization in the world. [TELECOM Digest Editor's Note: I did not know they were the largest; but their generosity is well known. PAT] ------------------------------ From: PWWL38A@prodigy.com (John Skalko) Subject: Re: Who Are the Telephone Pioneers of America? Date: 4 Feb 1995 01:26:58 GMT Organization: Prodigy Services Company 1-800-PRODIGY The length of service restriction has been removed -- at least at AT&T. No matter what your service length, you can join in this volunteer action organization. And, thanks for your succinct and lucid explanation of TPA. JJS [TELECOM Digest Editor's Note: You and the other Pioneers are quite welcome. I received some mail from a couple other Pioneers who said the same thing as yourself regards service length, that there is no longer a twenty year requirement. Apparently it was for a short time reduced to seventeen years, now there is no restriction at all. Also I was corrected on the year of their founding: it was 1911. In that year, several of the employees of AT&T who had -- even then! -- been with the company for twenty years or more -- a few had worked with Thomas Watson himself -- decided to form a service organization. Their first projects as an organization were with deaf people, and to this day hearing impaired people receive much of their time and resources. Alex Bell was deaf, you know, and a teacher of deaf people. Have a nice weekend everyone! Very cold and snowy here, and the cold will linger until Monday at least we are told. PAT] ------------------------------ End of TELECOM Digest V15 #78 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa14048; 6 Feb 95 4:33 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA08439; Mon, 6 Feb 95 00:26:18 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA08433; Mon, 6 Feb 95 00:26:16 CST Date: Mon, 6 Feb 95 00:26:16 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502060626.AA08433@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #79 TELECOM Digest Mon, 6 Feb 95 00:26:00 CST Volume 15 : Issue 79 Inside This Issue: Editor: Patrick A. Townson Book Review: "Managing Internet Information Services" by Liu (Rob Slade) More on Universal International Freephone Numbers (Judith Oppenheimer) Final CFP: ISLIP'95 (Mehmet Orgun) Unit to "Speak" CLID (John and DonaLeigh Engstrom) Combinet ISDN Routers (Robert Seltzer) New Motorola Micro-tac Elite AMPS Cellphone (Andrew Knox) Phone Number Wanted For Genesys Labs (Paul Kendall) International Tariff Database Providers (Mitchell Weiss) Information Wanted on MagNet Communications (franjo03@dons.ac.usfca.edu) Re: How I Fooled Caller ID (Clifton T. Sharp) ADSI Terminals (was How I Fooled Caller ID) (Tony Harminc) Re: MCI Gave me a Deal (John Marquette) Re: MCI Gave me a Deal (Daniel J. McDonald) Re: MCI Gave me a Deal (John Gutman) Dick Tracy Tackles Hackers! (TELECOM Digest Editor) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Sun, 05 Feb 1995 14:45:11 EST From: Rob Slade Subject: Book Review: "Managing Internet Information Services" by Liu BKMININS.RVW "Managing Internet Information Services", Liu et al, 1994, 1-56592-062-7, U$29.95 %A Cricket Liu cricket@nsr.hp.com %A Jerry Peek jerry@ora.com %A Russ Jones %A Bryan Buus buus@cs.bu.edu buus@csn.org buus@news.coop.net %A Adrian Nye adrian@ora.com %C 103 Morris Street, Suite A, Sebastopol, CA 95472 %D 1994 %G 1-56592-062-7 %I O'Reilly & Associates, Inc. %O U$29.95 800-998-9938 707-829-0515 fax: 707-829-0104 nuts@ora.com %P 630 %S Nutshell %T "Managing Internet Information Services" For companies interested in gaining an Internet "presence", most of the current crop of "business on the Internet" books recommend becoming an information provider. None of them are really good at telling you how. Here, then, is the first "all-in-one" compilation of Internet server tools. The book covers everything from simple finger responses, to mail servers, to ftp, to WAIS, to Gopher and World Wide Web servers. "Firewall" security, legal issues and intellectual property are touched on. While technical details predominate, there are practical suggestions for design as well. Unfortunately, this book is not really for managers. The material is demanding and requires a knowledge of UNIX. The authors note this in the preface, and it is fair to say that Internet server management is a technical task. At the same time, it would have been possible to have started with simpler items and more basic explanations. As it stands, the book is more appropriate for either the technical staff in a large company or those involved with setting up a UNIX Internet access provider. Perhaps a companion volume aimed at the more general user would be a future project. copyright Robert M. Slade, 1994 BKMININS.RVW. Permission given for distribution in TELECOM Digest and associated publications. Vancouver ROBERTS@decus.ca Institute for Robert_Slade@sfu.ca Research into rslade@cue.bc.ca User p1@CyberStore.ca Security Canada V7K 2G6 ------------------------------ From: Judith Oppenheimer Date: Sun, 5 Feb 1995 09:55:45 -0500 Subject: Universal International Freephone Numbers [TELECOM Digest Editor's Note: Ms. Oppenheimer responds to email she received on her recent articles. PAT] Mr. Brown, I have the same publicly-available information that you have. But I do have a few questions. Rather than private email, I would prefer to maintain the public forum of the TELECOM Digest so that this thread remains available to all interested parties. AT&T can no longer publicly maintain that their users don't care about their 800 numbers. In January 1993, the United States developed a position that included grandfathering of existing U.S. 800 assignments. This was further endorsed in October, 1994, by the U.S. Users Statement, which also rejects the lottery. And why shouldn't they? U.S. carriers have aggressively encouraged U.S. companies to invest in and brand their 800 numbers, leading the way themselves with such visible and successful marketing campaigns as 800 PICK ATT and 800 COLLECT. Indeed, 800 COLLECT is a trademarked brand. The overt lack of carrier support for customers suggests that the substantial investments of money and brand awareness in 800 PRODIGY, 800 JEEP EAGLE, 800 MERRILL, and others, are not important to their users. Or, that those users are not important to their telecom vendors: the carriers. Is 800 COLLECT also to be up for grabs? (Where do I sign up? ) When presented with this question, a participating MCI representative retorted that 800 COLLECT was useless overseas because there are no letters on the phone pads. We all now know that a new international telephone pad standard has been adopted. That argument, like the others, holds no water. So why maintain the propoganda that it doesn't matter? That your customers are willing to lose the very competitive edge that you yourself have helped them attain. Given the opportunity, wouldn't the carriers rather gain entry into European markets *and* protect and promote the interests of customers at home? U.S. users have spoken. They care. They stand to lose a great deal, and gain nothing. So how do *you* suggest that we move forward in a fair and practical manner to address everyone's interests? Judith Oppenheimer Producer@pipeline.com > Responding to msg by jcb@taz.ho.att.com () on Wed, 1 Feb 11:50 PM >> Judith, >> My fax number is 908 949 6203. I'd be happy to see >> what you have as 'current and unedited'. >> Thanks, >> John Carl Brown I'm adding another contact point to the list below that's more business oriented, for those of you who'd like to coordinate with like-minded business concerns. Aeronautical Radio, Inc. (ARINC) is the technical representative of the airline industry, acting on behalf of the US airlines who have a big investment in 800 numbers for their reservation systems. This organization, via its ITU participation, has been working hard on behalf of all U.S. 800 number users (for example, they gathered the impressive ranks of such users as American Express, EDS and the Ford Motor Company to draft and present the "Users' Statement of Principles Regarding Universal International Freephone Service.) Their stated mission in this matter is to protect and promote the interests of all U.S. 800 number users. The contact person at ARINC is Ben Levitan, 410 266-4111. He is the *only* participant at the international freephone meetings representing the formal U.S. position, and the U.S. 800 number users. J. Oppenheimer, Producer@Pipeline.com Interactive CallBrand(TM) ------------------------------ Date: Mon, 6 Feb 95 11:56:43 +1100 From: mehmet@macadam.mpce.mq.edu.au (Mehmet Orgun) Subject: Final CFP: ISLIP'95 Final Call for Papers ISLIP'95 The Eighth International Symposium on Languages for Intensional Programming May 3-5, 1995, Macquarie University, Sydney, Australia Objectives There is a growing interest in computational models and/or programming languages and systems based on intensional logics such as temporal logic, interval logic, modal and intuitionistic logics. In fact, a whole new programming model called intensional programming has begun with applications in a wide range of areas including parallel programming, dataflow computation, temporal reasoning, scientific computation, real-time programming, temporal databases, spreadsheets, attribute grammars, and hardware synthesis. This symposium aims at bringing together researchers working in all aspects of this area, and to promote intensive discussions and foster collaboration among researchers. We encourage papers dealing with the theoretical foundations, design, implementation and prototype development issues, comparative studies, and applications, as well as those describing new challenges arising out of applications. The symposium will include, but will not be limited to, the following topics of interest (as they relate to intensional programming): Programming paradigms Semantics * dataflow computation * non-determinism * connectionist models * extended Kahn principle * logic programming * intensional concepts * real-time programming * termination issues * visual languages * languages such as Lucid and GLU Software Engineering Applications * version control * signal processing * visual user interfaces * image processing * parallel programming * hardware synthesis * fault-tolerant systems * graphics * program verification * data models Submissions You are invited to submit either a full paper or an extended abstract of approximately 5000 words (10-15 double spaced pages). The cover page should include the name, phone/fax numbers and e-mail addres of the contact author(s), a short abstract, topic(s) and a list of keywords. Papers will be reviewed by the program committee for their originality, correctness, significance, and relevance to the symposium. We prefer PostScript or self-contained LaTeX submissions via electronic mail to either one of the e-mail addresses below. You can also send 3 hardcopies of your submission to one of the following addresses (chosen with respect to geographical proximity). Paper submission deadline is February 15, 1995. Edward A. Ashcroft / ISLIP'95 E-mail: ed.ashcroft@asu.edu Department of Computer Science & Eng Phone : +1 602 965-7544 Arizona State University Fax : +1 602 965-2751 Tempe, Arizona 85283, U.S.A. Mehmet A. Orgun / ISLIP'95 E-mail: mehmet@mpce.mq.edu.au Department of Computing Phone : +61 2 850 - 9570 Macquarie University Fax : +61 2 850 - 9551 Sydney, NSW 2109, Australia Authors will receive notification of acceptance by March 20, 1995. Revised versions of the papers to appear in the pre-proceedings to be distributed at the Symposium are due on April 12, 1995 (preferred in PostScript or LaTeX form, sent by email). The symposium will be held on May 3-5, 1995 at Macquarie University, Sydney, NSW, Australia. At the Symposium, the research will be presented and also evaluated, and it is planned that final polished papers will appear in the proceedings in book form (negotiations with a publisher is under way). The details about registration and accommodation will be provided later. Symposium Chair Edward A. Ashcroft Arizona State University Program Committee Seiki Akama Teikyo University of Technology Edward A. Ashcroft Arizona State University Weichang Du University of New Brunswick Tony A. Faustini Arizona State University Jan Hext Macquarie University Tom Hintz University of Technology,Sydney R. Jagannathan SRI International Michael Johnson Macquarie University Steve Matthews University of Warwick Mehmet A. Orgun Macquarie University John Potter Microsoft Institute John Plaice University of Laval William W. Wadge University of Victoria Andrew L. Wendelborn University of Adelaide Kang Zhang Macquarie University Local Arrangements Mehmet A. Orgun Macquarie University Kang Zhang Macquarie University Important Dates Submission Deadline: February 15, 1995 Notification: March 20, 1995 Revised Versions due: April 12, 1995 Symposium: May 3-5, 1995 Further Information Contact: ed.ashcroft@asu.edu mehmet@mpce.mq.edu.au Latest information about the Symposium will be made available via the WWW page: http://krakatoa.mpce.mq.edu.au/~mehmet/islip95.html ------------------------------ From: engstrom@netcom.com (John and DonaLeigh Engstrom) Subject: Unit to "Speak" CLID Date: Sun, 5 Feb 1995 02:05:13 CST Caller ID has just become available here in the Dallas area and I was thinking to myself "self, it would be nice to not have to get up and look at the caller ID box every time the phone rings". I then pull out my handy Hello Direct catalog and find the Voice 8000 unit which can tag up to nine numbers with individual audio stamps that play every time that number calls. Does anyone know of another unit that does this? I really need to voice stamp more than nine numbers for this idea to become useful. Thanks in advance for your help. John Engstrom engstrom@netcom.com ------------------------------ From: BSeltzer@ix.netcom.com (Robert Seltzer) Subject: Combinet ISDN Routers Date: 6 Feb 1995 03:06:34 GMT Organization: Netcom I am gathering opinions on ISDN products, particularly products from Combinet. Any information would be great. Thanks, Bob Seltzer BSeltzer@ix.netcom.com ------------------------------ Date: Mon, 06 Feb 1995 04:09:52 GMT From: aj.knox@auckland.ac.nz (Andrew Knox) Subject: New Motorola Micro-tac Elite AMPS cellphone Organization: University of Auckland Motorola New Zealand is apparently about to launch a new AMPS cellphone called the Microtac Elite. I would be quite interested to know whether anyone has any details about this phone or about pricing of it throughout the world. Apparently the phone was to be launched approx six months ago but problems with the lithium batteries have delayed the launch. Regards, Dr. Andrew Knox ------------------------------ From: pkendall@arnold.jfrank.COM (Paul Kendall) Subject: Phone Number Wanted For Genesys Labs Date: 06 Feb 1995 01:53:06 GMT Organization: J. Frank Consulting, Inc. Anybody have a phone number for Genesys Labs? I'm interested in their product line, especially the T-server. Thanks, Paul Kendall J.Frank Consulting Palo Alto, CA Paul.Kendall@jfrank.com ------------------------------ Date: Sun, 5 Feb 1995 13:51:35 -0600 From: mweiss@interaccess.com (Mitchell Weiss) Subject: International Tariff Database Providers I am looking for a list of companies who provide tariff databases for European, Far East, and other points of origin. Any help would be greatly appreciated. ------------------------------ From: franjo03@dons.ac.usfca.edu (Franjieh) Subject: Information Wanted on MagNet Communications Date: 5 Feb 1995 04:50:06 GMT Organization: University of San Francisco I would like to know whether anyone here has heard of MagNet Communications. They are one of those new long-distance carriers that offer flat-rate billing at six-second increments. I am new to this type of industry and would like to get some people's opinions (if they have any) before and if I am to convert my LD service. Any opinions that you might have would be greatly appreciated. ------------------------------ From: clifto@indep1.chi.il.us (Clifton T. Sharp) Subject: Re: How I Fooled Caller ID Organization: as little as possible Date: Sun, 5 Feb 1995 07:48:01 GMT In article Testmark Laboratories <0006718446@mcimail.com> writes: > Standalone Caller ID boxes that display calling number, or calling > number and name, "listen" all the time, and any time a valid incoming > Caller ID comes in, they display it! I checked several brands, and > they all behaved this way. Someone should alert the telcos and Not the Radio Shack 43-951 (sold some years ago); it only supplies +5V to its XR2206 chip between the first and second rings. I don't believe my AT&T model 85 will, either, but haven't been inside it. Cliff Sharp WA9PDM clifto@indep1.chi.il.us ------------------------------ Date: Sun, 05 Feb 95 01:38:35 EST From: Tony Harminc Subject: ADSI Terminals (was How I Fooled Caller ID) Testmark Laboratories <0006718446@mcimail.com> wrote: > Level 3: A telephone with a display screen. (The "D" in ADSI.) > The high end ADSI phones that I have tested even have things like > pull-out QWERTY keyboards for data entry, PCMCIA Type I slots, "smart > card" slots, and magnetic strip card readers! > It is estimated that there will be between 5 and 15 million ADSI Level > 3 screen phones in North America by 1998, and I suspect the higher > number is more accurate. Once you've tried one, you don't want to > give it up! Um -- how does this differ from inumerable similar failed projects like the Northern Telecom DisplayPhone or Bell Canada's Alex terminals now languishing in the remainder bins? The experience with Minitel in France is that sure -- everyone wants one *as long as they don't have to pay for it*. Start charging market rates, and the units are returned as fast as you can get a dial tone. Massive state subsidies is just not in the cards in North America, at least. Tony Harminc ------------------------------ From: John Marquette Subject: Re: MCI Gave me a Deal Date: 5 Feb 1995 01:02:42 GMT Organization: Earthlink Network, Inc. glen@cs.wisc.edu (Glen Ecklund) wrote: > MCI called yesterday, and made me an offer I didn't want to refuse. > 50% off on all calls for six months. After that, 50% off on calls to > MCI customers (no list required) and 25% off (if I recall correctly) > to everyone else. I'm a Sprint customer. I called MCI to verify the terms (YES! Including international calls, UK 31c/min) and got on the phone to talk with Sprint customer service. I asked if they would match the offer (I have several lines and am a good customer of long standing) ... bottom line is they would not match, nor do they have a tariff that's similar ... BUT they offered me a so-called "concession credit" on my account of $50.00 for my loyalty. May I recommend this to TELECOM Digest readers who are current Sprint customers? It's a dog-eat-dog world for customer retention out there and we the customers should benefit from it whenever possible. John Marquette ------------------------------ From: mcdonald@teleport.com (Dan McDonald) Subject: Re: MCI Gave me a Deal Date: Sun, 5 Feb 1995 21:10:46 PDT Organization: Teleport - Portland's Public Access (503) 220-1016 In article glen@cs.wisc.edu (Glen Ecklund) writes: > MCI called yesterday, and made me an offer I didn't want to refuse. > 50% off on all calls for six months. After that, 50% off on calls to > MCI customers (no list required) and 25% off (if I recall correctly) > to everyone else. No offense to MCI, but that sort of reminds me of an old Firestone ad: "Firestone Tires stop 40% faster" Of course, they fail to mention what they stop 40% faster than. So, if they mean 50% of the AT&T price for a similar call, that is one thing, but if it is just 50% off of their imaginary rates, I would do a bit more homework ... Daniel J. McDonald home: mcdonald@teleport.com Telecom Designer work: 2397@idchq.attmail.com Industrial Design Corporation pots: 1.503.653.6919 ------------------------------ From: John Gutman Subject: Re: MCI Gave me a Deal Date: 4 Feb 1995 17:50:09 GMT > MCI called yesterday, and made me an offer I didn't want to refuse. > 50% off on all calls for six months. After that, 50% off on calls to > MCI customers (no list required) and 25% off (if I recall correctly) > to everyone else. I received the same type of marketing call from MCI, and the salesman said that MCI would match any plan that I already had, including an AT&T Reach Out America calling plan with no calling card surcharge on the weekends that is no longer offered to new customers. John Gutman UC Berkeley ------------------------------ From: TELECOM Digest Editor Subject: Dick Tracy Tackles Hackers! Date: Sun, 05 Feb 1995 23:50:00 CST So after going outside early Sunday morning in very bitter (one degree above zero) weather to steal my neighbor's copy of the {Chicago Sunday Tribune} before he woke up and saw me out there, I immediatly turned to the section of the paper I never miss. No, not the front section news. Not Perspective, or the editorial pages or the Sunday Magazine. I ripped the six pound, five hundred page paper apart looking through all the innards, the Marshall Field advertising, the grocery coupons and such looking for the Sunday color comics so I could go sit in my kitchen in a stupor with a cup of coffee and see what Mary Worth, Blondie and Dagwood, Beatle Bailey, Brenda Starr and the others had going this week. A new serial began with Dick Tracy this Sunday, and you will surely all want to follow it. It seems a hacker has broken into computers all over town and is wreaking havoc. A cash machine spits out thousands of dollars to a man who requested twenty dollars. Computers in companies display pictures of Santa Claus in a 'wanted poster'. The telephone exchange is okay so far, but the story line hints it will soon be disrupted. No doubt over the next few weeks Dick Tracy, his partner Sam and that lady detective will catch the miscreant hackerphreak responsible for all this mischief and bring him to justice, comic page style. Does someone want to summarize it here each day for the duration for the benefit of people who don't get Dick Tracy in their paper? I get the {Chicago Tribune} most days -- by the way, 'Dick Tracy' belongs to the {Tribune} you know, or did you know? -- but they send him out across the nation daily via the syndicate. Anyway, I am sure it should be a very amusing and interesting little story over the next month or so, three picture frames daily and nine on Sunday with bubble messages in each. If someone wants to save me the trouble, let me know. PAT] ------------------------------ End of TELECOM Digest V15 #79 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa01377; 7 Feb 95 0:38 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA03465; Mon, 6 Feb 95 20:34:15 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA03457; Mon, 6 Feb 95 20:34:13 CST Date: Mon, 6 Feb 95 20:34:13 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502070234.AA03457@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #80 TELECOM Digest Mon, 6 Feb 95 20:34:00 CST Volume 15 : Issue 80 Inside This Issue: Editor: Patrick A. Townson Re: Caller ID to TouchTones (Steve Friedlander) Re: Caller ID to TouchTones (Donald L. Moore) Re: Clock Slips Again (dmac@trans.timeinc.com) Re: Clock Slips Again (Steve Daggett) Re: When Will PBXs Go Away? (pp000413@.interramp.com) Re: When Will PBXs Go Away? (Jack Pestaner) Re: LD Termination Fees to RBOCs (Ed Goldgehn) Re: AT&T 500 Number Problems (Stan Schwartz) NYNEX PIN Security - Extra Airtime? (Doug Reuben) Re: Cellular Fraud: How Much of it is Real Money? (Eric Nelson) Re: Cellular Fraud: How Much of it is Real Money? (Gary Novosielski) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 708-329-0571 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: stevef@mcs.com (steve friedlander) Subject: Re: Caller ID to TouchTones Date: Sun, 5 Feb 1995 11:19:44 CST Organization: MCSNet In article Lars Nohling writes: > I am looking for a device that will taking the incoming Caller-ID > number and enter it as touch tones to the answering modem before > connecting the incoming call. I want to use it for routing calls based > on the originating location. > Any ideas? Are you using 800 service? Arch Telecom offers Real-Time ANI and DNIS over POTS lines via DTMF tones, allowing you to route it where you wish. You will need a Dialogic type card. Steve Friedlander e-mail: stevef@mcs.com Providing efficiency and improved sales through Communications. The leader in "Value Added" 800 service is Arch Telecom! ************************1.800.ARCH.TEL************************* ------------------------------ From: donmoore@mercury.interpath.net (Donald L Moore) Subject: Re: Caller ID to TouchTones Date: 5 Feb 1995 22:41:20 -0500 Organization: Interpath -- Public Access UNIX for North Carolina In article , Lars Nohling wrote: > I am looking for a device that will taking the incoming Caller-ID > number and enter it as touch tones to the answering modem before > connecting the incoming call. I want to use it for routing calls based > on the originating location. Have you thought about using a modem that can read, the Caller ID data stream. Just by looking for that data between RING 1 and RING 2 you can have the data accessible for a program to do whatever you need. It may mean that you need alter your program. Don Moore ------------------------------ From: dmac@trans.timeinc.com Subject: Re: Clock Slips Again Date: Sun, 05 Feb 95 09:00:21 PDT > An oscilloscope placed on an analog campus line should show clock > slips as sudden phase shifts in the carrier. Is this a valid test? > If so, we could show the phase shifts through such a line and then > demonstrate that no such problems occur on campus or between two > Southwestern Bell lines. Martin, to prove the clock slip problem once and for all you should schedule an end to end test on the digital level. If you go through your equipment the LEC will assume it is your equipment, which it very well might be. I am assuming the trunk is a T-1, if so you can easily check for clock slips by stepping out the testing through the network using a Fireberd or similar test set. If you believe the clock slips are in the LEC's internal network then attack it as a quality issue that they must resolve. In case of the latter your most difficult task is to quantify the problem and here's the biggie, demonstrate it. If it is a clock slip it should be fairly regular and predictable. Damian McDonald, N2AEC Time Inc. Transmission Group ------------------------------ From: sdaggett@netrix.com (Steve Daggett) Subject: Re: Clock Slips Again Organization: NETRIX Corporation Date: Sun, 5 Feb 1995 22:58:19 GMT > I am pretty sure that we have a chronic case of clock slippage > somewhere in the interface between our campus' Ericsson MD110 and the > Southwestern Bell trunks. I would like to prove it once and for all. I assume from your post that your trunks to SW Bell are analog. If your trunks are digital then your Ericsson will be maintaining a slip count on your T1's. > It occurred to me that a modem sending a steady carrier such as is > used to establish a 300-baud connection would be a perfect signal > generator. It could be placed on a line off-campus and then called > from on-campus. An oscilloscope placed on an analog campus line > should show clock slips as sudden phase shifts in the carrier. Is > this a valid test? If so, we could show the phase shifts through such > a line and then demonstrate that no such problems occur on campus or > between two Southwestern Bell lines. It seems to me that using the phase shifts of a modem carrier would be rather indirect. It could be difficult to tell the difference between a clock slip and a modem retrain caused by some other factor. It would be easier to just hook up a point to point BERT test. You should see frame slips as _periodic_ bursts of bit errors on the BERT testers. The time period between bursts of errors will depend on the rate of change between the two different clock frequencies. The off campus BERT tester isn't necessary if you use full-duplex modems that support remote loopbacks. ON-CAMPUS OFF-CAMPUS ---------- --------- --------- ---------- | BERT |____| Dial | \------- | Dial |___| BERT | | Tester | | Modem |--------\ | Modem | | Tester | ---------- --------- --------- ---------- > Any suggestions are appreciated since the feeling is that > there is really nothing wrong because the lines all sound clean and > voice calls don't get dropped. Your trunks are probably running on several different T-carriers on their way to the CO. There are definitely dozens of T-carriers in your local area. You're probably only having problems with one or two segment out there in Telco-land. Try to find a commonalty that can help the local techs locate the bad segments. Look for one group of trunks that have the problem, or one area of town, or it's only when a call goes outside the local calling area. The more accurately you can describe the problem the better chance you have of getting it fixed. Steve Daggett sdaggett@netrix.com Herndon, VA USA ------------------------------ From: pp000413@.interramp.com Subject: Re: When Will PBXs Go Away? Date: Sun, 05 Feb 95 23:07:33 PDT Organization: PSI Public Usenet Link In article , writes: > What is the current thinking on when a PC (powerPC, whatever) replace > the PBX? i.e. when can I run my T1 from the telco with my voice trunks > on it into one card on a PC and have it route voice over the LAN to > other desktop computers that double as phones? It will probably be a > time curve: first available for small offices (ten users) on an ethernet, > then a while later available for 200 lines on a faster LAN, etc. What > says the net? My Mitel sx200 lite has a 68000 for a processor: it's a > MacPlus! Surely the cpu horsepower is available to replace lots of > dedicated TTL and switching hardware. I was just at a briefing from > Apple and they're working with the PBX makers for a Geoport Mac to be > a voice terminal behind a "big maker" PBX. But who are the startups > that are out to kill the PBX makers? I work in an office with five IBM mainframes tied together as one virtual machine, 7,000 PS/2s connected via a flat token ring, 13,000 data terminals, two central office switches that are used as PBXs, and 13,000 phones. Every day that I come in, I have to personally reset the file server on the LAN because I can logon only about 50 percent of the time. But, I can always pick up the phone and make a call without having to do an IPL on the switches. I would never trust LANs to carry voice any time in the near future. PCs and LANs are not engineered to the same standards for reliability and backup as PBXs and other switches. If you ever get into a management position, the first thing that will give you headaches is the number of times that mainframe applications go down during the day, the numbers of LAN servers that go on the fritz, and the number of folks complaining about something wrong with their PCs. But, not the phone system which is rock solid and reliable. We have ISDN on our switches which makes them extremely reliable for data communications, server access, connecting to the Internet, and information databases outside the building. I wouldn't want our PBX to go away because it is a powerful data switching machine that is always up when I need it. I can not say the same for any of our LANs. ------------------------------ From: jackp@telecomm.cse.ogi.edu (Jack Pestaner) Subject: Re: When Will PBXs Go Away? Date: 5 Feb 1995 15:31:04 GMT Organization: Oregon Grad. Inst. Computer Science and Eng., Beaverton Certainly anyone who predicts that PC's can't do a task will eventually be proven wrong, but I believe it will be quite a while before large PBX's or high reliability PBX's will be replaced by PC's. I have managed a 3000 line NEC PBX for five years now, and during that period, it has never experienced a system failure. On the other hand, it is rare that our PC's run for more than a week w/o CTRL-ALT-DELETE needing to be invoked. In a large user environment, perferction is the expectation, and Microsoft has never demonstrated that capability. For instance, when you have direct integrated T1's, any little glitch will dump any modem call on the system -- just one bit! Our PBX is fully processor redundant, and switches daily between processors without affecting phone traffic. It also has an architecture that supports expansion up to 20,000 stations. I suppose a network of PC's could eventually do this too, but you can imagine it is non-trivial. It does appear that some PBX manufacturers are moving in the PC direction. NEC has announced the 2000IVS, which is an Intel processor based PBX, and has ethernet capabilities. Apparently, it is becoming the darling of the CTI crowd. Also, it is very low cost, about 1/2 per port of our NEC, and has all the same features plus more. I feel much more comfortable seeing CTI from PBX vendors, rather than PC/PC Software vendors. Maybe the threat of competition and loss of market share will spur on the PBX people. Franky, the cost of many PBX features is outrageous, and the CTI has been very slow to come. ------------------------------ From: edg@ocn.com (Ed Goldgehn) Subject: Re: LD Termination Fees to RBOCs Date: 5 Feb 1995 19:04:17 GMT Organization: The INTERNET Connection, LLC In article , pturner@netcom.com says: >> BTW, the method of charges is entirely different for LD service in the >> cellular industry. With cellular, it is not unusual for local cellular >> carriers (RBOC's or otherwise) to provide FREE or flat rate termination >> charges to LD carriers. > Why not, if they extend the T1s to your MTSO? It's that many less > erlangs going out on the other (paid) trunks. I assume the B carriers > probally must provide this for free or are limited to some max rate by > Da Judge (that's Greene, not Ito :-)) Actually, it was a matter of marketing -- or necessity depending on your point of view. The cellular industry needed to attract long distance carriers to make connections to their networks in order to sell their services. It didn't do much good to provide local cellphone service without LD capability. But, the LD carriers weren't going to make those connections on the same basis that they make their existing LD access (by the connection and by time). So, since the cellular industry needs the LD capability to sell its local calling service, the fee structure was virtually eliminated. I don't know which cellular carrier was first to do this (I would take a guess that it was McCaw, but don't quote me on that). But, from what I've heard, this practice is now widespread. Ed Goldgehn E-Mail: edg@ocn.com Sr. Vice President Voice: (404) 919-1561 Open Communication Networks, Inc. Fax: (404) 919-1568 ------------------------------ From: stans@panix.com (Stan Schwartz) Subject: Re: AT&T 500 Number Problems Date: 5 Feb 1995 22:58:06 -0500 Organization: PANIX Public Access Internet and Unix, NYC Matthew Spaethe (mspaethe@umr.edu) wrote: > My 500 number isn't scheduled to be ready until Feb 3, but I've been > trying it pretty much everyday. Well, AT&T completed the call today > (the local switch has been accepting 1-500-367-XXXX for sometime) and > the only billing option was calling card. Well, I tried that, and > someone other than me answered the phone. I have no idea who it was, > but I guess I'll have the number when I receive my calling card bill! > [TELECOM Digest Editor's Note: Well, you have gotten a lot further with > it than I have here. My 500 number was supposed to be turned on yesterday, > January 30. Still no go as of Tuesday evening, January 31. The AT&T rep > suggested calling the Illinois Commerce Commission and asking them to > ask Ameritech to unblock 500. A call to the ICC got me the response that > 'so far as they knew' (the ICC), there was nothing yet tariffed for 500 > here. AT&T said try using it via 800-225-5288 (CALL-ATT), but guess what? > That didn't work either. Since my long distance service is defaulted to > AT&T I tried double zero, and ask the operator to get it for me. After > asking someone what to do, she tried dialing it and it went nowhere. She > said it was 'blocked' in her computer and would not 'leave'. > I am sure the AT&T billing department is more effecient and that I will > be billed for this month anyway, just as I was for last month. :( PAT] My 500 number was promised for February 5, and just after midnight, I dialed 1-500-XXX-XXXX, got the AT&T chime, and my other line rang. Way to go, NYNEX! Now if NYNEX could just get some other things straight, I'd be verry happy! (BTW: the line that I called 1-500 from is pre-subscribed to Sprint) -Stan [TELECOM Digest Editor's Note: I found out something curious over the weekend about my service: It works from *some Chicago prefixes in 312*. But it still does not work in any shape from 708. When dialing from a 708 number both 1-500 and 0-500 are blocked. PAT] ------------------------------ From: dreuben@interpage.net (Doug Reuben) Subject: NYNEX PIN Security - Extra Airtime? Date: Mon, 6 Feb 1995 01:16:12 EST After hearing about NYNEX/NY's (Boston too?) "Free Weekend Airtime", which allows toll and airtime free calling to anywhere in 212, 718, 917, most (all?) of 201, most (all?) of 908, (609 too?), and most parts of lower 914, I broke down and had a friend of mine who was going to cancel with Metro Mobile in CT sign up with NYNEX/NY rather than Cellular One. Due to NYNEX/NY's totally un-professional and erratic call-delivery system, as well as its significantly poorer coverage in most parts of NY (in NJ it is slightly better), and higher roaming rates, I normally do not even suggest NYNEX when someone asks me about service in NYC. (Although CO/NY does bill for incomplete calls over 40 seconds, so in some rare cases I will suggest that a person use NYNEX instead of CO if they make a lot of calls where the party they are calling takes over 40 seconds to answer.) However, free weekend airtime is something that's hard to argue with, so I told the guy to go with NYNEX, and he is in general happy with them for the free airtime (Until June?, enough so that he is willing to put up with their inferior coverage (signals rarely penetrate buildings, CO's signals seem substantially stronger inside buildings on average). However, they insisted that he have a fraud protection PIN code on his phone, as has been discussed here in the Digest in previous issues. This raises a question: Normally, for any call which is answered, billing STARTS shortly after you press SEND, when the system recognizes/validates your phone and processes your outward call. Thus, if you dial a number, and it rings for four minutes, and on the fifth minute it is answered, you will pay airtime (and perhaps - incorrectly - toll charges) for the FULL 5 MINUTES. Now how does the PIN code fraud feature affect this? I've timed how long it takes to get the "prompt" to enter your PIN code, and then to enter the code while driving, and it is about ten seconds. Now do these tenseconds count? Thus, if you place a call and are required to use the PIN, if the call lasts 65 seconds total, from the time you first sent out the call, are you required to pay for two minutes, or does the switch only start the airtime counter from when it receives a correct PIN code? Anyone test this? I'm interested in finding out because if I find that NYNEX/NY is billing people from the time they *initially* hit SEND to place the call rather than when a caller enters his/her complete PIN, I will call NYNEX/NY and demand to have the PIN feature removed. An information on this would be appreciated! Thanks, Doug Reuben * dreuben@interpage.net * (500) 442-4CID / (203) 499 - 5221 Interpage Network Services -- E-Mail/Telnet to Alpha or Numeric Pagers & Fax ------------------------------ From: mater@PrimeNet.Com (Eric Nelson) Subject: Re: Cellular Fraud: How Much of it is Real Money? Date: Sun, 6 Feb 1995 20:23:47 MST Organization: Primenet Additionally, sometimes the fraudulent phones are used as long distance centers. People will call the fraudulent number and then use three way calling to connect to a long distance or international number. The cellular companies have to pay for this long distance and international charge. Hence, real money out of their pockets. Cellular companies have invested quite a bit of money in pre-call validation procedures and equipment. The AUTOPLEX system has software patches that are designed to detect the rolling ESN type of fraudulent phone. GTE started a clearing-house about two years ago to do pre-call validation. ------------------------------ From: gary.novosielski@sbaonline.gov Organization: Small Business Administration Date: Sun, 05 Feb 95 21:35:24 -0400 Subject: Re: Cellular Fraud: How Much of it is Real Money? Some contributors have made the point that in "stealing" someone's goods or services, you steal their profits as well. Others maintain that only the replacement cost should be considered, if that. This question of real versus phony losses reminds me of the old joke: It seems there was this well-to-do lady walking down the street, back during the Depression. When she gets to the corner she sees a shabbily dressed fellow, obviously down on his luck, selling apples. She figures she'll help the poor guy out. "You there, my good man, I'll take an apple. How much are they?" "One million apiece," answers says the apple vendor. "Are you mad?" says the lady. "A million dollars? Don't you know you aren't going to sell very many apples at a million dollars each? What sort of fool are you?" "Who's the fool?" says the vendor. "I only need to sell one!" Sure, sure, bad joke; but stick with the premise for a moment: Suppose instead, at the end of the story, that the lady hits the guy over the head and steals his whole tray -- an even dozen apples. How much loss does he report to the police? How much loss has he suffered? If they catch the woman, what crime do they charge her with, grand larceny or petty theft? Does the fact that the vendor *priced* the apples at a million bucks each make them *worth* a million each? And what do the headlines read the next day? "Rich woman mugs beggar for twelve cents worth of fruit." -or- "$12,000,000.00 apple heist called `Crime of the Century.'" Gary Novosielski GPN Consulting [TELECOM Digest Editor's Note: The product is worth whatever the seller says it is worth, period. Its his product to be defined however he wishes. Whether or not anyone else agrees with his assessment is another matter. Generally we buy things we don't need based on our belief they are worth more than the seller is asking, not worth less than he is asking. If he says the apple is worth a million dollars, then that is what it is worth. If the cellular carrier says a fraud call was woth $X, then that is what is is worth. Now: how seriously would such claims be taken? In other words, what would the headline be the next day? Well, since he is an old dirty bum, his word on the subject would mean nothing. On the other hand, since the telcos and the computer gurus all speak their own language that no one else understands and since they dress properly and act as though they know what they are talking about, their word means everything. Everyone 'knows' that apples are not worth a million dollars, and the same people who 'know' this also are the kind to take everything telco says at face value. (The Telephone Company once said blah blah, fill in the blank). Therefore what telco says is true and old bums tell lies. Of course it also helps if you have an attorney who is good at sucking up to the right people, and a public relations department trained to bark on command. Don't you understand anything? Truth is whatever the right people say it is; the people who are in the proper circles, who dress and act properly and who say things the right way. Did anyone keep up with Dick Tracy in the paper on Monday? Over the next couple months he is going to catch someone who has stolen millions of dollars in phone service and computer resources. PAT] ------------------------------ End of TELECOM Digest V15 #80 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa04580; 7 Feb 95 6:52 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA09081; Tue, 7 Feb 95 01:29:11 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA09074; Tue, 7 Feb 95 01:29:08 CST Date: Tue, 7 Feb 95 01:29:08 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502070729.AA09074@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #82 TELECOM Digest Tue, 7 Feb 95 01:29:00 CST Volume 15 : Issue 82 Inside This Issue: Editor: Patrick A. Townson Re: LD Termination Fees to RBOCs (Fred R. Goldstein) Re: Cellular Fraud: How Much of it is Real Money? (Michael D. Sullivan) Re: What is a T1 Line? (Al Varney) Re: Cheap Way to Get an 800 Number? (Paul Robinson) Re: 28.8k bps Modem (Paul Robinson) New Archives Email Service Feature (TELECOM Digest Editor) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 500-677-1616 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: fgoldstein@bbn.com (Fred R. Goldstein) Subject: Re: LD Termination Fees to RBOCs Date: Mon, 6 Feb 1995 14:47:44 GMT Organization: Bolt Beranek & Newman Inc. In article rta <75462.3552@compuserve. com> writes: > Several issues are being raised here so let me try to sort them out. > For FGD, many tariffs if you break them down, have a 1/3 the cost in > switching, paying for COs and access tandems, 1/3 in transport, the > bandwidth, and 1/3 in Common Carrier Line on the originating or > terminating end, what the carrier pays to support (subsidize) the line > to your home or business. This breakdown is approximate and varies > from LEC to LEC, but it gives you the overall picture. Only about a > third of the charge is for bandwidth as most of us would interpret the > word. The other element is switching. That happens to be the way Feature Group trunks are priced. Of course the whole trick to FG pricing is that it's intended to be "contributory" (profitable). This comes from the old separations game of "splifs", for "subscriber plant factor" (SPF). In that game, the average usage of LOCAL lines is divided into interstate and intrastate baskets. The interstate portion is MULTIPLIED by SPF and then the total cost is divided amongst the two jurisictions. Given SPF of 3 (old ballpark; I don't know what it is now), then if 15% of calls in a jurisdiction were interstate, then the cost would be divided 85:45 to local/interstate. The subsidy, folks, is in the splifs. Interstate cost is currently divided into the part paid via tolls and the part paid via CALC ($3-6/mo "access charges"). The toll-usage part is divided into different components and adds up to 3-5c/minute/ side-of-call for most telcos. > Switching and the lines to the customer premises are really what is > expensive. The lines are not heavily utilized, in the case of many > small businesses and residences. Switches are expensive and are not > set up to support multiple hour calls. Regular business calls that > get through are typically 4 to 6 minutes in length with residential > calls longer since many are placed to friends and family. Switches > were engineered on the assumption that most calls would be short. As > data usage increases, the switches have to get bigger, an expensive > proposition or the multiple hour data calls will have to shifted to > another technology, such as packet or cell switching where switches > and long distance circuits are not tied up during think time. Strowger switch costs were heavily usage-oriented. Modern switch costs have a minor usage component, less than .1c/minute if you compute it, for local calls. Data usage could "pay its own way" at a fraction of a cent/minute for local calls. Don't let the phone companies fool you otherwise. > Most modern CO switches detect a phone that is off the hook and not > transmitting and generate an obnoxious tone to get you to hang up. Proof that somebody's trying to confuse the issue. The howler tone does not tie up major resources in a modern switch; the line card is just connected to a tone generator channel. On an old Strowger it could hang a line finder. > Jerry Harder Senior Partner > Renaissance Telecommunications Associates Lemme guess. A consulting firm specializing in helping telcos win rate hikes? Fred R. Goldstein k1io fgoldstein@bbn.com Bolt Beranek & Newman Inc., Cambridge MA USA +1 617 873 3850 ------------------------------ From: mds@access.digex.net (Michael D. Sullivan) Subject: Re: Cellular Fraud: How Much of it is Real Money? Date: 6 Feb 1995 03:50:31 -0500 Organization: Wilkinson, Barker, Knauer & Quinn (Washington, DC, USA) bruce@zuhause.MN.ORG (Bruce Albrecht) writes: > My question is that if they are truly losing hundreds of millions of > dollars a year to fraud, why aren't they switching to known technologies > (e.g., GSM based) which have per call authentication using a random > number query with an encrypted key response, when such systems have > been available for several years in other parts of the world? If they > really are losing $300 million or more a year, it must be cheaper to > replace every single cellular phone with a more secure system than to > let these losses continue to escalate. At least in part because the FCC *requires* all cellular carriers to provide AMPS-standard, unencrypted, analog service. They are free to offer alternatives as well, such as CDMA and TDMA (GSM, too, if anyone cared to do so), but they still have to provide service to unencrypted analog customers. Also, phones using the unencrypted AMPS standard are cheaper and provide better voice quality than the alternatives; the companies' customers have analog phones. Cutting off the majority of your customers to prevent fraud is a great way to go out of business. The cellular manufacturers have been working on new standards for nearly ten years. They aren't about to come up with yet another standard -- analog with encryption -- that will be incompatible with every system out there, and the carriers aren't about to buy it when they plan to transition to digital over time and do away with analog when the FCC allows it and their customers accept it. PCS, on the other hand, has the advantage of reinventing the wheel, since there's no embedded base of equipment. Unfortunately, there are something like seven different standards under consideration for PCS (including at least one GSM variant). > If most of this amount is funny money, "lost profits" that they never > really expected to generate, and use of excess capacity, then are the > phone companies crying wolf? Are we currently in the position where > the phone companies are like the suburban/rural household that never > locks their doors "because crime never used to be a problem", and now > screams for more police because they keep getting burglarized, but > still never lock their doors? The carriers have tried a lot of things, from "electronic signatures" of phones that have to match a database entry to PIN numbers etc. The latest is the FCC's new rule, which the manufacturers hate, that requires the ESN to be unchangeable, period. This, unfortunately, is kind of like making it illegal to build a house without locks to prevent burglary. > My main concern over cellular telephone fraud is that because it is > partly due to decisions made by the phone companies, and that it's > probably been exaggerated, that our government is either going to > respond with excessive legislative and/or regulatory reaction to a > technical problem, or with no action at all. Either way, it sends the > wrong message. As discussed above, it's not just decisions made by the phone companies; it's decisions made by the government, purchases made by consumers, and the limits of technology. Are we going to eliminate credit card fraud by eliminating account numbers or mag stripes and require voiceprints? No. Are we going to eliminate software piracy by reqiring copy protection? No. Similarly, we can't eliminate cellular fraud by requiring use of a standard that obsoletes all of the existing phones and cellular systems. Michael D. Sullivan | INTERNET E-MAIL TO: mds@access.digex.net Bethesda, Md., USA | also avogadro@well.com, 74160.1134@compuserve.com ------------------------------ From: varney@usgp4.ih.att.com (Al Varney) Subject: Re: What is a T1 Line? Organization: AT&T Network Systems Date: Mon, 6 Feb 1995 08:54:21 GMT In article , Butch lcroan/.nameBalcroan Lilli wrote: > ARGHHH !! I am really getting tired of this BIT-Robbing conversation > that Jeffery Rhodes started. I used to work with Jeffery and he > certainly is a smart guy, but he is no expert in this area. > ... but there is more to consider here. The " MU LAW " is not a linear > scale it is more of a log function with more steps closer to the lower > levels where the ear is more senstive. I really can't believe 2 DB; > come on Jeff, 3 db is half power *and also the least amount the ear can > detect*. Jeff certainly can fend for himself in this forum, so this is just to add a little FACT to the fray. Butch, you were right -- Jeff was stretching the truth. The actual drop in Signal-to-Distortion ratio with 1/6 bit robbing between two switches is 1.8 dB, not 2. Of course, when there are 5 switches in the connection, the ratio drops by up to 4.2 dB. (5 out of 6 bits are affected on 10% of the calls, 4/6 on 40%, 3/6 on 40%, 2/6 on 10% and 1/6 less than 1%.) On a typical mid-length call (intraLATA toll or between adjacent LATAs), 3 out of 6 bits will be robbed 57% of the time and the ratio drops by about 3.2 dB. > I really doubt that the modems are affected by this as > much as Jeffery has stated. I would more believe than something more > common such as " ECHO " and several other more common impairments are > really alot more important than a occasional bit robbing. I agree that S/D ratio is not a BIG issue with modems, but it does place a small per-call variation into the connection -- and that could be just enough (combined with echo/cross-talk) to force a modem to back-off to a lower transmission rate. It is probably at least as much of a factor as the individual variation between two different modem lines at a common location. > There are also several new technologies such as fiber that have > introduced timing impairments such as " Jitter " into the equation. Jitter exists on all synchronous transport mechanisms, even ISDN lines. Copper-based, fiber-based, microwave-based, soliton-based all jitter. Whether it is a significant problem usually depends at least partly on the bit-rate, repeater design and bit-detection mechanisms. You seem to have it in for optical-based media -- what do you have against photons? Al Varney ------------------------------ Date: Mon, 06 Feb 1995 10:11:14 EST From: Paul Robinson Organization: Tansin A. Darcos & Company, Silver Spring, MD USA Subject: Re: Cheap Way to Get an 800 Number? > Some friends and I are starting a new small business. We would like to > have an 800 number. How do I get one? You call a long distance carrier's 800 number and tell them you want one. Within a couple of business days they will turn on the number. > Other than ATT/MCI/Sprint, are there other people who can provide an > 800 number cheaply? Don't know how much you mean by 'cheaply'. My 800 number from AT&T costs me $8 a month plus usage, which is typically around 20-25c a minute depending on how far the person is from Maryland. As I typically have a low calling volume, the costs usually run only $12 a month or so. > How do I minimize my cost? First you have to figure how many calls you expect to receive. If you are doing a substantial number of calls now, you might see some of them move to the 800 number. If you see you are getting large volumes of calls, you can change your service to a different plan which charges slightly more for the service and less per minute. > How do I get 800-CALL-MY-BUSINESS? Do I have have to pay extra for a > "good" 800 number. I originally had Sprint for my 800 number. The number I wanted -- since my company name is "Tansin A Darcos & Company" -- the number I wanted to get was 1-800-TDARCOS. I couldn't get it; it was apparently reserved by someone else, even though calling it indicated that the number said it wasn't in service. The business line here is 301-587-6354. So, I got *that* number from Sprint, e.g. 1-800-587-6354 which is a nice idea. I checked later with AT&T when I saw their rate was fairly competitive with Sprint. Guess what: AT&T *was* able to give me 1-800-832-7267 (800-TDARCOS). So I moved to them. There was one item that I was not told, which suggest you ask all costs in advance. Sprint enabled the number I asked for -- the one that matched my telephone number -- for the fee of something like $10 a month, and included a listing with 800-555-1212 and even allowed calls from Canada; they asked me if I wanted to allow that, I said ok. When AT&T turned on the new number, there was an additional "installation" charge of $45. During a one month period, both 800 numbers from each carrier terminated on the same 301-587-6354 number so, unless a carrier has some rules against it, you can have multiple numbers terminating on the same line. Also, there is no longer an instate/out of state restriction. I can call my 800 number from another phone in the same room, or I can call it from Virginia (which is out of state but also a local call in this area). You no longer have to have separate instate/out of state numbers. And my bill shows the ANI of every call I've received, which occasionally includes calls from places like Texas or New York. Another thing to consider is who had your 800 number before; if it was in use by someone else recently. I used to have a big problem with my old 800 number I had a couple of years ago (this was before you could ask for a specific number); the former owner was a freight broker, so I got calls from long hall truckers across the country telling me about partially empty trucks available from point a to point b. I finally had to put an announcement on the line that said "Tansin A. Darcos & Company, a computer software development company." This is a point that is probably going to be a problem for the local telephone companies. Bell Atlantic will sell an 800 number for instate calls (it mentions this in the phone book); because of the long distance restriction they cannot provide interstate delivery. I doubt they can be much cheaper than a national carrier; if I can get an 800 number from Sprint for $10 a month that allows me to receive calls from anywhere in the US or Canada, why would I want a number that only works in my home state? About the only reason I could see is if you wanted a restriction on incoming calls from this state. But that's a problem too: within a 50 mile radius of where I am includes in MD: Baltimore, BWI Airport, all of Montgomery and Prince George's county, the state capital at Anapolis, parts of Howard County, but it also includes interstate areas including all of Washington, DC, Independent Cities of Alexandria, Falls Church, and Fairfax, Va; towns of Vienna and Manassas, plus Fairfax and Arlington Counties in VA, plus Washington National and Dulles Airports. If I want to reach anyone I can get to in a two-hour radius, an in-state only 800 number is worthless. In fact, most companies operating anywhere within twenty miles of Washington typically will operate in DC plus the cities and counties in both states surrounding it. For example, a large local plumber here lists one number to call in the greater Washington area: 1-800-4-HOT-WATER. I know they are licensed in all three jurisdictions. While they could probably take calls from Baltimore, or Arlington, VA, calls to them from, say, Dallas/Ft Worth or Los Angeles or Chicago would be worthless. Yet since they don't advertise there, paying more per month to block calls outside the local area probably isn't worth the extra cost, e.g if you get $3 worth of wrong numbers a month, paying an extra $20 to restrict area codes you don't want to service is not cost effective. ------------------------------ Date: Mon, 06 Feb 1995 10:54:58 EST From: Paul Robinson Organization: Tansin A. Darcos & Company, Silver Spring, MD USA Subject: Re: 28.8k bps Modem Victor Hu , writes: > I just purchased a 28.8 K modem with the brand "Supra". I paid extra > to get the 28.8 K instead of the 14.4 K. Probably about twice as much. 14K modems are down to $50 or so. 28Ks are probably in the $100 range. I purchased a 14.4 two years ago and it cost me $215. Consider yourself fortunate. Mine still works quite well -- I am using it to enter this message -- and like most modems, will be obsolete long before it wears out. If my Internet provider decides to upgrade to 28.8K, I will probably get one. Otherwise, since I can't use one yet, I'm not going to bother. > 1. Is the bps across the twisted pair wire actually running at 28.8 or > 14.4 when 28.8 is invoked? Or is it just data compression? The raw data rate for a modem will be from 110 to 28,800 baud (or 14,400 baud) depending on what the other side agrees on. The rate will be the lowest of whatever the two modems agree on. If you call up a service that has only 14.4 modems, or 9600 baud modems, or even 2400, you will only get 14.4 or 9600 or 2400 even though your modem can do more. If both modems are 28.8 and both have their highest speed enabled, you should see 28,800 baud before any compression occurs. The data is not sent at 28,800 bits per second, however. Typically the modem will divide up the telephone line into six or more channels, and run each channel at 2400 to 4800 bits per second. By multiplexing six channels at 2400 baud, you get 14,400 baud, etc. > 2. What kinds of host supports 28.8K? I only connect up to my > university's computer which only runs at 9.6K max. Your university may have so much load they can't run faster than 9600, or the terminal controller might not be able to handle it. Many mainframes can't do I/O faster than some otherwise slow speed by comparison. When a IBM Sierra mainframe came out, a 9600 baud modem probably cost as much as an ISDN BRI interface does now; hundreds or thousands of dollars, so the port controller was probably set up with that as the maximum. The school might not have money in the budget to upgrade modems, or the hardware might not be able to support those kind of speeds, or it could be the administration was waiting until the 28,800 speed was standardized by ITU, as some modems used proprietary methods to communicate about 14.4 and thus you might need the same brand at both ends. You might ask them if they plan to upgrade to 28.8 now that the ITU has standardized the method of delivering 28,800 baud. > 3. What is the speed of fax machines? There are two speeds for transmissions. First, when the connection is being set up, each side will send an identifier sequence. I call it the "answerback" after the similar sequence sent by a telex machine. This identifier sequence is called a TTI or CSI. One of these will typically appear in the log that the fax machine prints after 20-40 transmissions indicating the identifying machine. The other is the telephone number or other identifier that appears in the display window. The two items may be different. This information is transmitted by each machine at 300 baud, which is okay since it is typically no more than 60 characters for each side. The sending machine then increases its speed and the transmission takes place in the equivalent of "half duplex" mode, except that the recipient machine typically acknowledges the end of each page and end of transmission. The ITU standard for fax machine transmissions supports 4800, 9600, 12000, and 14400 baud, but typically a fax machine that does printing will do 9600 tops, and can be downgraded to 4800 if line conditions are bad. 12000 and 14400 are typically for fax modems in computers. > 1. The Supra has a nice display (external version for the PC) that > shows the mode of transmission. > 2. However, I found that it required a different initialization string > than that suggested as default for modems that are Hayes compatible. The strings for each modem are because they all do different things, and thus, to enable those features you have to set certain values. For example, you can do a feature called "port locking". Currently, my terminal program sends and receives data to and from my modem at a "locked" speed of 19200 baud. The modem will transfer data to and from the computer at 19200 baud, whether the connection at the other end is 110 all the way to 14400. The typical rule is to indicate every connection is at 19200. I can set a switch register and the modem will also report the actual connection speed. I can set a switch and have it enable or disable data compression, and I can enable or disable error correction. And I can set switches so that it tells me whether the other side allows or does not allow compression or error correction, or force error correction or compression. For example, when playing DOOM over a modem, the modem will run at 9600 baud (later revisions of the driver support 14,400). The modems must not use data compression or error correction (because the extra time to do this can lose synchronization between the two computers), and the setup string for my modem will specifically disable these features. At the end of the game, the driver will issue an AT Z HO to disconnect the line and reset the modem to the default settings. If I have caller ID service on a line, I can enable the modem to send the data after the "RING" message. I can enable the data in hexadecimal display digits, or I can enable it as ASCII text. I can also tell the modem to resend the last Caller-ID string it got, and I can tell it to resend it in hex or ASCII, even if I had already received it using the other mode. I can also turn off reception of Caller ID data. If I want the modem to send or receive facsimile data, the program must use the AT&F prefix with certain commands to tell the modem to either place a fax call or receive a fax. Every feature in a modem requires controls on it in order to enable or disable them as needed in a particular instance or application. Oh, yes, one more thing. The alleged claims of data compression giving throughput rates of 50+K and 110K on 14.4 and 28.8 modems is sheer fantasy. If you were sending a 100,000 byte file consisting of all spaces, or all the same character, you might see those kind of rates. On my 14.4K modem, on ASCII text files, if I use a locked port at 38,800 baud, and enable compression I can see transfer rates of as much as 3000 cps in rare cases, and typically around 1800 cps if the data compresses well. For binary and compressed ZIP archive files, I have generally seen average transfer rates in the 1600-1620 cps. For a 28.8K modem, you can expect to probably see rates around 3200-3400 cps, depending on the content of the material, if the other side uses a 28.8K and can stuff it fast enough to keep the line loaded. MCI Mail supports 14,400 baud on their dialins, but I typically see rates in the 700-1000 cps rate, probably because their VAX machines are heavily loaded. Occasionally I'll see rates as high as 1200 cps. ------------------------------ From: TELECOM Digest Editor Subject: New Archives Email Feature Date: Tue, 07 Feb 1995 01:00:00 CST Monday evening I installed a new feature in the Telecom Archives Email Information Service software called AREACODE. This allows the user to enter one or more areacodes and get back email telling where the code is located. This is just an additional command installed in the software, used in the same way as the other commands. You can insert as many areacodes as desired and get back responses on each one. If you are not already familiar with the Telecom Archives Email Information Service, you can request a help file explaining how to use the service. Send email to tel-archives@lcs.mit.edu. The subject does not matter. In the text of your message, at the left margin, enter these commands on your first use of the program: REPLY yourname@site HELP INFO END The REPLY command *must* be first, and END *must* be last. What you put in the middle depends on what you are seeking. The help file you will get in return explains the other commands. To use the new AREACODE command, it would look like this: REPLY yourname@site AREACODE 208 701 302 509 (or whatever areacodes you want to check). END Watch for a response in email, typically a minute or two later. Other interactive commands you can use are: SEARCH to search the back issues of the Digest for subject and author names since 1989 forward. GLOSSARY to search the several glossaries on line in the Archives checking for abbreviations and telecom terms you want to learn about. The help file will explain it all when you order it and INFO. Carl Moore keeps the area codes files up to date, so blame him, not me if you don't find all the newer codes there. Patrick Townson ------------------------------ End of TELECOM Digest V15 #82 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa04771; 7 Feb 95 7:00 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA08409; Tue, 7 Feb 95 00:53:05 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA08402; Tue, 7 Feb 95 00:53:03 CST Date: Tue, 7 Feb 95 00:53:03 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502070653.AA08402@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #81 TELECOM Digest Tue, 7 Feb 95 00:53:00 CST Volume 15 : Issue 81 Inside This Issue: Editor: Patrick A. Townson Book Review: "Straight Talk About the Information Superhighway" (Rob Slade) GTE PCS/Global Roam (Bernard Cerier) Caller ID and Call Waiting (Evan Champion) Re: Old Phone Number Format Question (Charles Shukis) Re: Old Phone Number Format Question (Al Varney) Re: MCI Strikes Again (Christopher Harwood Snider) Re: How I Fooled Caller ID (Shawn Gordhamer) Re: How I Fooled Caller ID (John Lundgren) Basic LAN/WAN Internetworking Cliff Notes Needed (guest machine) Professional Voice Prompts For IVR etc. (Evan Berle) Another A&T 500 Service Mixup (Matthew Spaethe) Re: MCI Gave me a Deal (Michael P. Deignan) Re: MCI Gave me a Deal (Christopher Harwood Snider) Re: MCI Bureaucratic Blunder (Richard Masoner) Re: Fraudulent Call Forwarding (Robert S. Helfman) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 500-677-1616 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Mon, 06 Feb 1995 14:25:05 EST From: Rob Slade Subject: "Straight Talk About the Information Superhighway" BKSTINSH.RVW 941226 "Straight Talk About the Information Superhighway", Goldsborough, 1994, 1- 56761-513-9, U$19.99/C$26.99 %A Reid Goldborough %C 8219 Northwest Blvd., Indianapolis, IN 46278 %D 1994 %G 1-56761-513-9 %I Alpha Books/MacMillan Publishing, USA %O U$19.99/C$26.99 800-858-7674 %P 340 %T "Straight Talk About the Information Superhighway" Yes, by all means, let us have some straight talk about the information superhighway. The author waffles around with terms like "vehicle for the delivery ... of ... multimedia," but the reality is that the phrase was and is a speech-writer's icon. The slogan is very environmentally friendly: it has been reused in ever-broader situations, recycled in more promotions and speeches, and, in the process, reduced almost to meaninglessness. Goldsborough, in common with many who have only a tenuous grasp on the concepts, attempts to marry the widespread, anarchic, and still experimental Internet with the tightly-controlled "providers" of electronic media. (He also attempts to expand the collection of information supercliches with "infopike". Since he uses this to draw an analogy to the toll-road turnpikes of the northeastern United States, it is easy to see where his sympathies lie.) The book is a collection of enthusiastic essays about life in the telecom- rich future, with a piece concluding each chapter by some politician, "industry leader", Famous Person, or other "expert". Sometimes, it's hard to determine whether the "viewpoint" is an addendum to the chapter, the chapter is an introduction to the viewpoint, or whether both are related solely by proximity. The author must be sensitive, in advance, to possible charges that this material is all very "blue sky". After the opening story, he argues that this is not a fantasy, but that future technology will be very much like it. Of course, the technologies presented -- email, multimedia extensions, teleconferencing, voice recognition and macros -- are all available *now*, but it is obvious that Goldsborough is not really experienced in the most effective ways to use them. This is an extended series of the usual mass-media magazine articles, high on "gee whiz!" and low on content. copyright Robert M. Slade, 1994 BKSTINSH.RVW 941226. Distribution permitted in TELECOM Digest and associated publications. Vancouver ROBERTS@decus.ca Institute for Robert_Slade@sfu.ca Research into rslade@cue.bc.ca User p1@CyberStore.ca Security Canada V7K 2G6 ------------------------------ Date: Mon, 6 Feb 1995 15:26:29 -0500 From: BERNARD.CERIER@gte.sprint.com Subject: GTE PCS/Global Roam Pat, Information you may find of interest. >>>>>>>>>>>>>>>>>>>>>>>> Forwarded By Mac SprintMail >>>>>>>>>>>>>>>>>>>>>>>>> February 2, 1995 GTE PERSONAL COMMUNICATIONS SERVICES AND DEUTSCHE TELEKOM MOBILFUNK GMBH (DETEMOBIL) ANNOUNCE GLOBALROAM(SM), AN INTERNATIONAL CELLULAR ROAMING SERVICE; GTE OFFERS FLAT RATE AIRTIME CHARGE IN EUROPE AND OTHER CONTINENTS GTE Personal Communications Services and DeTeMobil today announced an agreement to offer international cellular roaming service. With the service, called GlobalRoam(SM), a traveler's cellular roaming capability will ultimately be expanded to most countries in the world. "American business travelers will have the same communications mobility from country to country as they already have domestically from city to city," said Jerry Waylan, executive vice president-product management and business development, GTE PCS. "Our research clearly indicates a need and desire for this service." In 1993, 3.7 million business people traveled between the U.S. and Europe," said Roland Mahler, executive director of product management mobile telephony services, DeTeMobil. "As the marketplace becomes increasingly global, we are making sure that business communications are keeping pace." Through this agreement, each company will have its own gateway to provide interoperability between their two different cellular transmission standards. GTE, along with all other carriers in North and South America, uses analog cellular radio technology known as the AMPS standard, which stands for Advanced Mobile Phone Service. Most other countries in the world have adopted a digital cellular system known as the GSM standard, which stands for Global System for Mobile communications. Deutsche Telekom, the parent company of DeTeMobil, played a leading role in the development of GSM. Initially, DeTeMobil subscribers will have access to North American cellular services. Through international roaming agreements between DeTeMobil and other GSM network operators, North American subscribers, through their local carriers, will be able to use worldwide GSM networks. In the summer of 1995, GlobalRoam will be available in more than 30 countries, and will eventually be expanded to include countries with other cellular standards. GTE PCS will market the service initially to large U.S. corporate customers and then to North American cellular carriers including GTE Mobilnet and Contel Cellular, who will offer the service to their customers under the GlobalRoam service name. DeTeMobil will offer GlobalRoam to GSM cellular carriers. Subscribers to the GlobalRoam service will receive a "smart card," programmed with an identification number and other customer information. For travel outside the U.S. and Canada, they will purchase or rent a GSM mobile phone that accepts the card. The phones will be available for overnight shipment. When subscribers use the phone in a foreign network, calls to their home cellular phone number will automatically be directed to their GSM phone, which will operate in any country where DeTeMobil has a roaming agreement with the respective network operator. "Ultimately, we expect manufacturers to develop dual mode, AMPS/GSM cellular phones, which can be used at home as well as in other countries," Waylan said. All charges will appear on the customers "home" cellular phone bill as international roaming charges. The GlobalRoam service will be made available to cellular carriers at a flat wholesale rate, per-minute airtime charge, plus toll, and a one-time activation fee with recurring monthly charges per subscriber. Cellular carriers can then retail this service to their subscribers. Additionally, as an option, the carrier can provide to North American travelers a debit "smart card." A $100 debit card, for example, would cover the cost of $100 in airtime and toll charges. The debit card will initially be available for use in Germany. GTE Telecommunication Services Inc. (GTE TSI) will facilitate this service by providing the AMPS/GSM gateway in North America. In addition, GTE TSI -- which provides advanced software services to the wireless industry -- will provide billing record translation and clearing services so that charges for the international roaming service will be included on customers standard cellular telephone bills. For additional information on this service, call 1-800-798-ROAM. Deutsche Telekom Mobilfunk GmbH (DeTeMobil), headquartered in Bonn, is a wholly-owned subsidiary of the Deutsche Telekom AG, dealing with mobile communication services. The company is Germanys largest provider of these services and one of the largest in Europe with more than 2.2 million customers at the end of 1994. DeTeMobil is the operator of the digital network D1 and played a leading role in the development of the successful international GSM standard Global System for Mobile Communications. GlobalRoam to be available in summer 1995 in these countries: Australia Latvia Austria Luxembourg Belgium Netherlands Canada Norway Denmark Philippines Estonia Portugal Finland Singapore France South Africa Germany Spain Greece Sweden Hong Kong Switzerland Hungary Turkey Iceland United Arab Emirates Indonesia United Kingdom Ireland United States Italy # # # ------------------------------ Date: Mon, 6 Feb 1995 20:10:40 +0000 From: evan champion Subject: Caller ID and Call Waiting Organization: Bell Northern Research This is a problem that I'm sure is shared by many people who have caller ID and call waiting. If you have caller ID, you have probably grown very attached to that "reassuring" feeling of knowing that the person at the other end is not a telemarketer, or similarly disfunctional individual, but rather you best friend Bob. Now, the problem is that if you are on the phone and someone calls in, you get the call waiting beep but no indication of who the second caller is. Caller ID is not applied to the call waiting service. Is there a reason why caller ID cannot be used with call waiting? I would pay dearly to be able to get call display and name display working with call waiting. (I am a Bell Canada subscriber, but I suspect this problem affects more than just us Canucks). Evan [TELECOM Digest Editor's Note: There is a two-part answer here. The first part is why it cannot work, and the scond part is about how it will soon be changed so it does work. The present arrangement is that the data has to be sent when the phone is on hook. If you are willing to disconnect your call in progress and hang up completely (rather than just flashing the hook and putting the first party on hold) then you *will* get the CID for the new call. The data gets sent to your box between the first and second *actual ring at your end*. This means it could 'ring' five times in the caller's ear and you would get a couple of call waiting tones. You finally tell your caller you want to see about the other call and will call him back later. You disconnect and the call waiting starts ringing at your end. Watch your ID box; the calling number will show up there immed- iatly. The ID comes between the first and second ring *you hear* from the actual bell on your phone. Now if it is someone you do not want to talk to, well, you are sort of stuck at that point. I guess you let it ring through to your answering machine or voicemail. That is another curious point: Even though you have voicemail you might have noticed that the call waiting won't transfer there after three/four rings like other calls. Well, it will, but again, its after three/four rings *that you hear* -- not the artificial 'rings' the caller gets in his ear. A sophisticated caller who knows that he always gets your voicemail after three/four rings calls and it rings ten times in his ear *then* he gets your voicemail realizes you were there, and on a call, and chose not to take his call once you saw who was on the ID box. That is going to change however. We had a report here not long ago about 'Caller-ID on Call Waiting' (I believe that is what it is called) and how it will be implemented later this year in many places. My understanding is you'll need to have a special kind of phone to make it work. It will work sort of like call waiting does now, where the central office gets on your pair, and for a split second breaks the path to the person you are talking to in order to send the spurts of tone. Its going to do that same kind of thing with Caller ID on Call Waiting in the future. Existing display boxes and phones will not be compatible however. Would whoever sent in that report send it again as there have been others asking. PAT] ------------------------------ From: shukisc@ix.netcom.com (Charles Shukis) Subject: Re: Old Phone Number Format Question Date: 6 Feb 1995 00:22:26 GMT Organization: Netcom >>> The following question appeared recently in the Old Time Radio >>> Digest mailing list, and seems tailor-made for an answer from this >>> forum. >>> From: "Richard M. Weil" >>> The number for the store in Rockford was curiously 8-22-47. I'm >>> too young to know anything about 5 digit phone numbers. Is that >>> how it was back then in small cities? Gee, all this talk of 5-digit numbers makes me feel old! I grew up in a small town in western Pennsylvania, and in the late 1940's, our phone number was 849M. No idea why the "M" instead of a fourth number, but the line was a four-party line (private lines were extremely rare -- most everybody I knew had a party line). The phone would ring when any one of the party-line subscribers were called ... each had his own distinctive ringing pattern. Ours was two longs and two shorts, or some such thing. The only way to tell if the line was in use was to pick up the receiver and listen. One of the other subscribers on our line had a daughter quite a few years older than I, and I must admit that I didn't always hang up when I heard her on the phone. Never listened long, though, because I found "girl talk" boring ... "mushy" was the word used in those days, I believe. "Crossed connections" were not uncommon in the days of mechanical CO's (anybody remember the cats' eyes?), either, so we frequently got to listen to conversations between other subscribers, as well. No taps, no bugs, no scanners: the telephone was a source of entertainment as well as a means of communications. I don't know what the laws were then, but I probably committed my first felony, or at least misdemeanor, before I was five years old! As we got older, we found another way to use the phone for entertainment: "prank" calls. Call the local drugstore ... "Do you have Prince Albert in a can?" ... 'Yes, we do.' ... "Well, you'd better let him out before he suffocates!" Such shenanigans are a thing of the past, killed by ANI, CID, auto call-back, auto call-trace, and the like ... perhaps it's just as well. [TELECOM Digest Editor's Note: For those unaware, 'Prince Albert' was a type of smoking tobacco used in a pipe. I guess they still make it. The other variation on this was to call someone late at night and claim to be the Electric Company, asking 'is your refrigerator running?' Some fools would actually put the phone down and go into the kitchen to see, then come back and say it was. "Then you better stop it before it runs away and you never see it again ...". To five and six year old children, those jokes are very funny, especially when played on an 'old person' late at night, after the 'old person' was already in bed asleep and the child should have been but wasn't. The 'M' (like J, W, and R) were just keys to tell the operator which party on the line was to be rung. The switchboards had four buttons marked M,J,W,R and the operator would press down on one of these buttons while pulling the ringing key. Whichever one she pressed sent the current one way or another down the party line to ring the one bell, and only the one bell similarly wired. Other places had the 'short/long' ringing system as you mentioned, where all bells were wired in common, and the subscriber was relied upon to know which to answer and which to ignore. PAT] ------------------------------ From: varney@usgp4.ih.att.com (Al Varney) Subject: Re: Old Phone Number Format Question Organization: AT&T Date: Mon, 6 Feb 1995 07:40:29 GMT In article , Michael Dillon wrote: > In article , uoknor.edu> wrote: >>> From: "Richard M. Weil" >>> The number for the store in Rockford was curiously 8-22-47. I'm >>> too young to know anything about 5 digit phone numbers. Is that >>> how it was back then in small cities? > Too young, eh? > In the early 1970's I lived near Moonstone, Ontario in Canada. At the > time we got phone service from the Moonstone Telephone Company which > was bought by Bell in 1972 I believe. Before Bell came in, our number > was 33-W-21. The way it was explained to me was that 33 was our line I grew up on a farm outside a small Kansas town, with manual phone lines run by Southwestern Bell. I still have a yardstick from the local lumber yard with "Phone 37" on it. Around 1959 they put in a small SXS CDO and dial phones. And everybody got a four-digit phone number in the block of 32xx to 35xx. Since business (and businessmen's homes) had all the two-digit numbers, they were converted to the 32xx block by prefixing "32". So the lumber yard got 3237 and his house got 3236. His widow still has that number. Southwestern Bell replaced the SXS in 1993 with a digital switch, and forced everyone to seven-digit local dialing. Virtually every business still has a NXX-32xx number. (The fire department has 3210.) For my home town, the current phone book (6" by 9" format) has just over three pages. My dad has the distinction (since his mother died in 1980) of being the only "V" entry. Al Varney ------------------------------ From: Christopher Harwood Snider Subject: Re: MCI Strikes Again Organization: University of Virginia Date: Mon, 6 Feb 1995 15:43:32 GMT jenkins@visar.wustl.edu writes: > 3) MCI missed the boat. When I called, they seemed to think nothing > of the fact that the long-distance service was not in my name. > 4) Telecom*USA, when informed of the whole proceedings, declared that I > had a "$5 minimum usage" charge on my acount. When in reality, I didn't. > 5) Southwestern Bell AND MCI don't compare notes when user's start > complaining about mis-billing. Only when state agencies get in the > act, do they begin to resolve the problem. > Is it over? I don't believe it will end until the PSC gets involved again. > This is a time that makes me wish there were two local companies. That way > the competition would force them to be as caring of their users as they are > about their money. > On the other hand, I believe that Murphy was an optimist. Michael, If I'm not mistaken, Telecom*USA is a subsidiary of MCI. I've looked at their rates, and they are not pretty. The MCI F&F program beats them and there are even better rates out there. It really is worth it to look around. Regards, Christopher H. Snider Telecommunications Consulting American Access chs2c@virginia.edu ------------------------------ From: shawnlg@netcom.com (Shawn Gordhamer) Subject: Re: How I Fooled Caller ID Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Mon, 6 Feb 1995 18:58:14 GMT Could you send the data while your phone is ringing? I've heard that you can put resistors across your line and talk to someone while your phone is ringing, and the phone company doesn't know it's picked up. This implies that you can send data yourself between rings. Is this true? Shawn Gordhamer shawnlg@netcom.com [TELECOM Digest Editor's Note: Yes, you can put a resistor across the line then attach a listening device behind that and listen all you want without being detected. That's how phones are tapped. And, I suppose you could send data, since as far as everyone else is concerned, your phone is still on hook. But how would the person who is attempting to spoof *your* display box know that you had such resistance on your line unless he came to your house and put it there himself? Seems like a lot of trouble to me. PAT] ------------------------------ From: jlundgre@kn.PacBell.COM (John Lundgren) Subject: Re: How I Fooled Caller ID Date: 6 Feb 1995 19:48:29 GMT Organization: Pacific Bell Knowledge Network Clifton T. Sharp (clifto@indep1.chi.il.us) wrote: >> Standalone Caller ID boxes that display calling number, or calling >> number and name, "listen" all the time, and any time a valid incoming >> Caller ID comes in, they display it! I checked several brands, and >> they all behaved this way. Someone should alert the telcos and > Not the Radio Shack 43-951 (sold some years ago); it only supplies +5V > to its XR2206 chip between the first and second rings. I don't believe > my AT&T model 85 will, either, but haven't been inside it. The XR2206 chip requires a _minimum_ of 10 volts to operate. The above statement sounds bogus to me. John Lundgren - Elec Tech - Info Tech Svcs Rancho Santiago Community College District 17th St. at Bristol \ Santa Ana, CA 92706 jlundgre@pop.rancho.cc.ca.us\jlundgre@kn.pacbell.com ------------------------------ From: guest machine Subject: Basic LAN/WAN Internetworking Cliff Notes Needed Date: 7 Feb 1995 00:59:00 GMT Organization: Loyola University of Chicago Can you assist with a brief discussion on the basics behind LAN/WAN technology and internetworking? I'm interviewing for a job and am not all that familiar with this area. I don't need the techy version, but just need to be able to talk intelligently about LANS/WANS, hubs and routers. I would like information on the major players in these areas. i.e cisco Systems, Synoptics, etc. Thanks; I really appreciate any assistance here. ------------------------------ From: evan@pubnix.net (Evan Berle) Subject: Professional Voice Prompts for IVR etc. Date: 7 Feb 1995 02:52:09 GMT Organization: Vox Box Are you involved in setting up: Automated Attendants Voice Mail Interactive Voice Response Systems Fax-Back Systems Automated Call Directors ... or any other system that prompts the user with voice? Are you looking for professional voice prompts? Check out the VOX BOX home page at HTTP://www.pubnix.net/~evan using Netscape or any other graphical browser. VOX BOX provides voice prompts and on-hold advertising to telephone companies and end-users. Evan Berle Montreal, CANADA. evan@nash.pubNIX.QC.CA ------------------------------ From: mspaethe@umr.edu (Matthew Spaethe) Subject: AT&T 500 Service Date: 6 Feb 1995 19:30:37 GMT Organization: UMR Missouri's Technological University On September 4, 1994, I reserved 1-500-FOR-MATT (which is a non-guaranteed reservation). I was told that that number was not being used, and they would do whatever would be possible to get me that number. For the next months, I called and called to check up on the status of the 500 assignments. Well, on Jan 3,1995, I ordered my 500 number which was scheduled to go into service on Feb 3,1995. Then my 700 number was supposed to be cancelled at the same time. Well in late January, my number was working, but someone else was answering the call. I called AT&T, and they told me to just wait until Feb 3, and it should work then. Yesterday was Feb 3, and I called them. They were going to assign my 700 master pin to my 500 number that evening. I called back later to ask a question, and now they had NO RECORD EVER of me ever wanting a 500 number. I was informed that the 500 number belonged to someone else! NO RECORD OF ANY CONVERSATION! NONE!! NADA!!! They told me they were sorry, but there was nothing they could do. Believe me, I was very upset. Not just losing my number, but not having any record of talking to them. I kept asking them about all the literature I have that I requested! It's got my name, my address, etc. They set me up a new 500 number in 55 minutes. It went from a month to 55 minutes! My voice mail still doesn't let me in, and they keep trying to fix it. United Telephone doesn't know how to bill the 500 call, so I must use a calling card. MANY MANY little things ... I know that "my" 500 number terminates in NY, and that I believe that person also had 0-700-MATTHEW. It wouldn't suprise me if he worked for AT&T (since their headquarters is located at 195 Broadway). It's just very very very weird for all information about my 500 number to be GONE! VANISHED!. Four of my five lines are now on MCI, enjoying my 0.06/min night rate ... Matt :( * Internet: mspaethe@mcimail.com * PGP Public Key: finger mspaethe@franklin.ee.umr.edu [TELECOM Digest Editor's Note: Well, you might check again. Very possibly the computer was 'down' when you called and they could not 'find a record' of any previous calls. Sometimes when they are without computer they try to bluff as they go along ("I don't have all of your records available to me right now ..."). What you are saying could be true, but I have never seen them quite that bad, that they lost everything. In other news, *my* 500 number started working perfectly today. About 3 PM Monday I tried dialing 0-500 and 1-500 and as before, got nowhere. But I had already found out both versions work fine from Chicago. I called repair service on a lark and ask them 'when is 500 going to be unblocked?' I got a call back within ten minutes from a woman very eager to hear all about it. She insisted all was working fine. "Not in the Skokie CO," I told her. She seemed astounded to hear that but said she would look into it right away. Another five or ten minutes goes past and she calls me again to advise "I fixed it. The translations were not loaded is all ... you can use it now." Of course I tried it immediatly after disconnecting with her, and sure enough, it worked fine, twenty minutes or less after calling repair service. Amazing ... absolutely amazing. An interesting side to this is when I use my own phone to dial 1-500-677-1616 (my number) it rings once and I am told it will try my alternate numbers (because it found my home number to be busy). When I do 0-500-677-1616 and tell it to bill the call to the phone I am using, it vanishes for a couple seconds and I get call-waiting, then after four rings (call waiting or not) it interupts and a voice message says it will try my alternate numbers. I did not bother with AT&T voicemail; I have voicemail up the kazooey from a few other places I rarely use. Anyway, feel free to call me at any reasonable hour: 500-677-1616. PAT] ------------------------------ From: md@pstc3.pstc.brown.edu (Michael P. Deignan) Subject: Re: MCI Gave me a Deal Date: 6 Feb 1995 11:56:58 GMT Organization: Population Studies & Training Center > MCI called yesterday, and made me an offer I didn't want to refuse. > 50% off on all calls for six months. After that, 50% off on calls to > MCI customers (no list required) and 25% off (if I recall correctly) > to everyone else. I saw a commercial for this last night. I thought it stooped to a new sleazy low in marketing. At the very end, MCI claims you "always save over AT&T True USA" and then in little letters that I needed to squint to see, next to "True USA" were the words "ex promo". Wow, what a deal. What next? "Save 99% on all calls" and then in a four point font "compared to AT&T's rates 30 years ago!" I think the public is rapidly becoming burnt out on these percentage "savings" compared to some obscure number nobody ever mentions. I don't know a single person who doesn't flip the station when a long distance advertisement comes on. In my opinion, Sprint is the real winner now, with their penny-per-minute promo. At least you know what you're paying and when the rate is applicable. With the other two, its a percentage crap-shoot over some elusive "basic" rate. MD ------------------------------ From: Christopher Harwood Snider Subject: Re: MCI Gave me a Deal Organization: University of Virginia Date: Mon, 6 Feb 1995 15:39:18 GMT glen@cs.wisc.edu writes: > MCI called yesterday, and made me an offer I didn't want to refuse. > 50% off on all calls for six months. After that, 50% off on calls to > MCI customers (no list required) and 25% off (if I recall correctly) > to everyone else. 50% off is all well and good, but what is it off of? If that is their savings on $1/minute rates then you are getting taken to the cleaners. Percentages do not matter as much as the bottom line which is the rate you are paying. Find out what those are and then you can make a viable comparison. I have flat rates around 14 cents/minute on my home line with a carrier. I have seen better rates from resellers, but I just can not trust them with my phone service. Anyone in the US can get these rates and businesses will often times get better, if not much better, rates. Also, do not get a calling card if it has a surcharge or any hidden fees such as higher first minute billing. Ask for nothing less than straight six second billing. You should only be paying for what you use, right? I hope this helps. :-) Regards, Christopher H. Snider Telecommunications Consulting American Access chs2c@virginia.edu ------------------------------ Date: Mon, 6 Feb 95 11:24:25 CST From: richardm@cd.com (Richard Masoner) Subject: Re: MCI Bureaucratic Blunder Organization: Central Data Corp., Champaign, IL > was made! October was the last month we received a billing from MCI > on the U.S. West bill, and it was only for part of the month. So, > suspicions are that an error made by U.S. West in finally correcting > their bill to us created the problem with MCI, and started the This is interesting. I too am an MCI subscriber, and last October the MCI portion of my bill no longer appeared on my GTE-North phone bill. I did get the MCI bill separately, directly from MCI. A phone call inquiring about why this was quickly rectified the situation. Richard [TELECOM Digest Editor's Note: Rectify it for us please. Why are they now billing you separately. PAT] ------------------------------ From: helfman@aero.org (Robert S. Helfman) Subject: Re: Fraudulent Call Forwarding Date: Wed, 1 Feb 1995 08:17:08 -0800 Organization: The Aerospace Corporation In article Patrick Townsend wrote: > [TELECOM Digest Editor's Note: This same report appeared in alt.dcom.telecom > today submitted to that newsgroup by Jack Decker who concluded by saying ........deleted........... > What goes around comes around: Does anyone remember the old anecdote about ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^....Hah! > the original development of automatic switching involving Alvin Stroger? > Mr. Stroger was an undertaker a hundred years ago; he believed that the > operators on the manual exchange serving his community had been bribed to > divert calls from the public seeking funeral/burial services to his compe- > tition. So the story goes, he developed the switch which came to bear his > name as a way to be certain that manual operators at telephone exchanges > could not wilfully give away his business to his competitors. PAT] PAT, tell us that you actually intended that hysterical pun! (Then again, many readers are too young to get it ...) [TELECOM Digest Editor's Note: Yeah, I had the same thing in mind. I do stand corrected though on the inventor's name: It is spelled 'Strowger' with a /w/ in the middle. PAT] ------------------------------ End of TELECOM Digest V15 #81 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa21485; 8 Feb 95 5:21 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA08730; Wed, 8 Feb 95 00:28:03 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA08724; Wed, 8 Feb 95 00:28:01 CST Date: Wed, 8 Feb 95 00:28:01 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502080628.AA08724@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #83 TELECOM Digest Wed, 8 Feb 95 00:28:00 CST Volume 15 : Issue 83 Inside This Issue: Editor: Patrick A. Townson FCC Allocates Data-PCS Spectrum (Bennett Z. Kobb) 911 Access in Jeopardy (Jim Conran) Speculations Regarding AT&T True Connections (John Shelton) Where are the CTI Environments? (Scott Sanbeg) The Philosophy of CallerID (Malcolm Slaney) Special Alert! Unreasonable Network Policing Proposed (Carlos Amezaga) Who Belongs to 10732 Five-Digit Access Code? (Thomas Grant Edwards) Survey of IT-Consumption in USA (Morgan Widung) Custom IVR (Jack Pestaner) Motorola Flip Phone and Low Battery (Erik P. Larson) Human Intrusion (Dale Neiburg) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 500-677-1616 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: bkobb@newsignals.com (Bennett Z. Kobb) Subject: FCC Allocates Data-PCS Spectrum Organization: New Signals Press Date: Tue, 7 Feb 1995 22:31:31 GMT Here is the news release issued by the FCC today on the 2.4 GHz allocation. (The full text of the decision has not yet been released.) Congratulations to all concerned for a job very well done. Bennett Kobb bkobb@newsignals.com Editor and publisher Spectrum Guide Federal Communications Commission NEWS February 7, 1995 Action in Docket Case (ET Docket No. 94-32) The FCC has allocated 50 Megahertz of spectrum, at 2390-2400 MHz, 2402-2417 MHz, and 4660-4685 MHz, that was transferred from Federal Government to private sector use. The allocations adopted by the Commission today will benefit the public by providing for the introduction of new services, such as wireless local area networks, and the enhancement of existing services. Among other things, these services will allow companies to operate more efficiently by communicating through wireless networks that are flexible enough to operate almost anywhere. They also will allow low cost access to Internet services and other information networks for schools, libraries, telecommuters and home offices. In addition, these services will allow for better health care through wireless health care monitoring devices and allow the instantaneous updating of health care records and databases. The Commission stated that this 50 MHz is the first of at least 200 MHz of spectrum required to be reallocated from Federal Government to private sector use in accordance with the Omnibus Budget Reconciliation Act of 1993. The Budget Reconciliation Act of 1993 required the Commission to adopt allocations for and propose regulations to assign this first 50 MHz of spectrum by February 10, 1995. The Commission allocated the 2390-2400 MHz bad for use by unlicensed Personal Communications Services (PCS), provided for continued use of the 2402-2417 MHz band by unlicensed devices operating in accordance with Part 15 of the Rules, maintained the availability of both of these bands for use by the Amateur service, and allocated the band 4660-4685 for Fixed and Mobile services. The Commission stated that unlicensed PCS devices, which include wireless networking and data transfer devices, operating in the 2390-2400 MHz band will be governed by the same rules that apply to PCS devices operating in the 1910-1920 MHz band. Power levels, emission limits, and spectrum etiquette for unlicensed PCS devices operating at 2390-2400 MHz are identical with requirements for asynchronous (data) devices operating at 1910-1920 MHz. The Commission believes that allocating the band for unlicensed data-PCS, and providing for use of 2402-2417 MHz by Part 15 devices, will provide for the continued development and implementation of a new generation of advanced communications devices and services, such as wireless local area networks, digital cordless telephones, electronic article surveillance equipment, utility metering devices, fire and security alarm devices, and wireless bar code readers. In addition to offering the potential for providing greater safety and security to citizens and allowing business to operate more efficiently, this new family of devices offers the potential to directly benefit a large percentage of the public by providing a new "on-ramp" to the information superhighway. Corresponding to the Fixed and Mobile allocation for the 4660-4685 MHz band, the Commission proposed technical, assignment and service rules. Action by the Commission February 7, 1995, by First Report and Order and Second Notice of Proposed Rule Making (FCC 95-//). ------------------------------ From: jconran@watson.policy.net (Jim Conran) Subject: 911 Access in Jeopardy Date: 7 Feb 1995 21:08:23 GMT Organization: Capital Area Internet Service info@cais.com 703-448-4470 Cellular phone users throughout the country could have their 911 emergency access in jeopardy if action is not taken immediately. The FCC issued a proposed rulemaking on October 19, 1994 that to look into the matter of revising FCC rules and regulations to ensure compatibility to 911 enhanced services. Comments to the FCC from concerned citizens will be accepted until February 8, 1995. Your action is greatly needed on this matter if 911 services are to be accessible by all cellular users. Please do not wait until a natural or other disaster strikes before you realize how valuable full accessibility to 911 emergency services is for all citizens. To learn how to take immediate action on this issue: http://watson.policy.net/cf/cf.html gopher://watson.policy.net:70/11/.cf email: jconran@911.policy.net Jim Conran Executive Director Consumers First jconran@911.policy.net P.O. Box 2346 Orinda, CA 94563 510/253-1937 510/253-1359 (Fax) ------------------------------ From: John Shelton Subject: Speculations Regarding AT&T True Connections Date: Tue, 7 Feb 95 13:39:55 PDT Here are some speculations re: AT&T True Connections service: * Use of SS7 to better judge whether a phone is answered or busy or whatever. - Note: AT&T says if you have a sequence of numbers, and one is busy, they will skip to the next one. - Note: AT&T says sequencing option is not available to some customers, *yet*. * AT&T sees this as a way to keep customers loyal. - $1/mo isn't very much revenue for the basic service. But you need to have AT&T service on that line. - Those of us with multiple phone lines can of course keep AT&T service on one line (for TrueConnections billing) and use MCI or whatever for the other lines. * Some PBX systems will continue to block calls to NPA 500 for quite a while. They won't see the utility, and may even be suspicious that it's "like 900". * Other carriers will not charge the same rates for calls to NPA 500. The 500 number space will become a big mess for a while, until things settle down and some consortium addresses the issue. (Who does set the rate for such a call; the caller's LD company, or the destination's LD company??) John [TELECOM Digest Editor's Note: AT&T sets the rates (or whatever company offers the 500 service, such as Ameritech also proposes to do) for calls since you are connecting to them. It is much like calling an 800 number in that the billing is done by the company whose prefix you dial into. All your local telco will be doing is handing the call off to AT&T (or other 500 carrier.) I think from now on the *only* phone number I am going to give out (on forms I complete, etc) is my 500 number. PAT] ------------------------------ From: ssanbeg@coho.halcyon.com (Scott Sanbeg) Subject: Where Are the CTI Environments? Date: 8 Feb 1995 00:05:19 GMT Organization: NW NEXUS, Inc. -- Internet Made Easy (206) 455-3505 A lot has been happening with CTI ... it was happening last year when I attended the conference in Dallas and much is hyped over in the industry rags. However, my company has looked into many environments over the past year and have, so far, found only one that seems it will be suitable (when it's completed). A full featured application out of Florida is called Dimi/TAS. Agent stations are MS-Windows (or ...) clients connecting to a central server or more. I've reviewed AmTelco's Infinity system where telephony and data are on seperate networks altogether, using MS-Windows DDE capabilities to automatically hot-key between the two nets. We're familiar with Eve, Startel, TASCOM, others. But, our call center environment is too large for entry-level network topologies. We look like this: _______ |-------| Fiber | | __| MUX | | | |_______| T1's, ISDN, # Call Center | | Other WAN Server 1 | | (FDDI RING #1) Connections | * Router ||| # Call Center | (Firewall) # Communications ||| Server 2 | Server ||| | ||| (FDDI RING #2) # Call Center | |----| ||| Server 3 | | |Modem Pool ||| |____| |(192 ports)________ ** Bigger Router @@@@@@... |____| (Firewall) 65 Agent Stations Beyond that, we have used the telco approach with -48 volt power supplies, everything is redundant, we generate our our AC and have a large natural gas generator for when and if city utilities go out, a wall of batteries dual-homed/dual-attached/dual counter-rotating ring FDDI switches connecting the servers and dedicated 10Mbps Ethernet going to each Agent Station. One Call Center Server is a fault-tolerant Tandem. We have many T1 spans and have been in business for 58 years. We just don't need an entry-level topology, as you may see. What we do need is a client-server based product that will run well on 65 Windows-for-Workgroups clients, and understand Tandem's CAM (for telephony integration, screen pops, etc.). The product we need incorp- orates functions of an answering service and a call center (message taking and order taking), with the ability to send data out via fax, remote printer, PC pickup, etc. Who knows such a critter? Scott Computer Systems Engineer, Seattle, WA ssanbeg@halcyon.com ------------------------------ Date: Tue, 7 Feb 1995 19:35:53 +0000 From: malcolm@interval.com (Malcolm Slaney) Subject: The Philosophy of CallerID The article listed below (with abstract) does an incredibly good job of discussing the issues in CallerID and Anonymous call-rejection. The article's primary purpose is to define four types of privacy and how they relate to CallerID: Anonyminity - public place but no ID Solitude - Don't be disturbed Reserve - Mental distance Intimacy - Screening To make the issue more interesting, who wins and loses depends on who has access to the technology. This article should be required reading for anybody who wants to enter into the debate. I think the definitions and framework are a valuable starting point. Malcolm ----------------------- Caller ID and the Meaning of Privacy Laurie Thomas Lee (Univ of Nebraska-Lincoln) Robert LaRose (Michigan State) The Information Society, Volume 1, pp 247-265, 1994. Caller ID service continues to be controversial issue in the U.S. because of its privacy implications. State and federal regulators, legislaters, scholars, and the courts have examined and responded to the privacy issue from a policy perspective, but perhaps without a complete understanding of the meaning of privacy in the context of the debate. What types of privacy are involved, how signifiant are these interests, and how might privacy needs compare and be balanced? This article explores privacy in the context of the Caller ID debate from a social science perspective. It examines motives for seeking and preserving privacy and explores the dynamic relationship between the caller and the called party positions. It then provides an analysis of current and proposed Caller ID features and policies with a view towards understanding how these proposals balance competing privacy needs. This article establishes an analytic framework and a foundation for further study of caller and called party privacy that should lead to a better understanding of the privacy debate and the privacy implications of Caller ID. ------------------------------ Organization: Megalith Mail/News Server - Miami, FL USA Reply-To: overlord@megalith.miami.fl.us From: overlord@megalith.miami.fl.us (Carlos Amezaga) Subject: Special Alert! Unreasonable Network Policing Proposed Date: Tue, 07 Feb 1995 20:57:00 EST -> EMA ALERT <- News For and About the Members of the ELECTRONIC MESSAGING ASSOCIATION ============================================================ February 3, 1995 -- Number 18 <----------------------------------------------------------> ***** SPECIAL ALERT ***** - Congress to consider making all system operators liable for messaging content. Bill would force employers to monitor message content. ACTION NEEDED NOW! <----------------------------------------------------------> UNREASONABLE NETWORK POLICING PROPOSED Yesterday, Senator Jim Exon (D-NE) introduced S.314, the Communications Decency Act of 1995, in the United States Senate. In an effort to stamp out digital pornography, it makes all telecommunications providers doing business in the United States (from the telephone companies all the way down to offices that use LANs) liable for the content of anything sent over their networks. To avoid the possibility of tens of thousands of dollars in fines and up to two years in jail, business owners would be forced to police their networks and monitor in advance all messages sent over them. WITHOUT ACTION - COULD BE LAW IN MONTHS This bill is substantially the same as the one he put forward last year. He will offer it as an amendment to the pending telecommunications deregulation legislation in the U.S. Senate, which is expected to be enacted by July. Last year, his amendment was adopted even though many thought it hastily drafted and poorly thought out. Fortunately, the telecommunications deregulation legislation died. This year, a more conservative U.S. Congress may be even more reluctant to challenge a "morality" amendment; and its legislative vehicle, the telecommunications deregulation legislation, stands a much better chance of passage this year. ACTION NEEDED NOW Action by the business community is needed now. Please notify your corporate government affairs office and/or your legal counsel. This measure could be adopted as an amendment to the telecommunications bill IN A MATTER OF WEEKS (or potentially added to any legislation pending on the U.S. Senate floor), if business does not mobilize against it. S.314 will not stop digital pornography, but it could devastate the messaging business. If you are interested in further information or are able to participate in lobbying efforts over the next few weeks, contact Sarah Reardon at EMA (see below). --------------------------------------- EMA ALERT is published and copyrighted (1995) by the Electronic Messaging Association. Permission to reproduce and/or redistribute with attribution is hereby given to all EMA members. For more information about anything in EMA ALERT, contact EMA via e-mail - use either X.400 (S=info; O=ema; A=mci; C=us) or Internet (info@ema.org) address, facsimile (1-703-524-5558), or telephone (1-703-524-5550). Any EMA staff member can be addressed directly via e-mail by using, for X.400, G=; S=; O=ema; A=mci; C=us, and, for Internet, @ema.org. EMA's postal address is 1655 N. Fort Myer Dr. #850, Arlington, VA 22209 USA. -- % __A500 % UUCP: postmaster@megalith.miami.fl.us % I Tried MS-DOS Once % % __/// 030 % DATA/FAX: +1.305.559.3145 % But Didn't Inhale. % % \\//Amiga % System Administrator - PGP on Request % --D.Atkin-- % ------------------------------ From: tedwards@src.umd.edu (Thomas Grant Edwards) Subject: Who Belongs to 10732 Five-Digit Access Code? Date: 7 Feb 1995 14:44:15 -0500 Organization: Project Glue, University of Maryland, College Park Recently an "urban rumor" has been going around: If you want to know whether your phone has been tapped in the last six months, dial in the following: 107 321 404 988 966 4 What you will get back is a digital recording consisting of (a) your phone's area code; (b) your 7-digit phone-number; (c) the digit 8; (d) a pause of a few seconds; (e) 9 zeroes in three groups of three -- 000 000 000; and (f) a digit. If the digit (f) is a 2, your phone is clear. Otherwise, if it is any other digit (usually it's a 1 in that case), your phone has been tapped in the last six months. OK - obviously this number is 10732-1-404-988-9664. Which provider is the 5-d code 10732? Anyone know mroe details on the 1-404-988-9664? Thomas [TELECOM Digest Editor's Note: Gosh, what a mystery! If you will be so kind as to dial 10732-1-700-555-4141 the recording which answers will tell you that you have reached 'a private network', and that if you want to get more information you can dial your account representative. For anyone wishing to make a call, we are told to dial (here comes the clue!) 10288 and the number. 10732 is used by AT&T's largest customers. I don't know everything about it that makes it different than 10288, but it does have a few things different. In case you had not noticed, 404-988-9664 cannot be dialed via any other carrier. You can try it; all you will get is a busy signal. This tells us that AT&T is grabbing incoming calls to that number via 10732, intercepting them and delivering them somewhere (probably to themselves at their office in Atlanta) on a T-1, and that the actual phone 988-9664 is just left off the hook all the time. After the recitation of your phone number -- or more precisely, your ANI -- then your account number is read back. It is all zeros because you don't have an account with AT&T, at least not where this particular network is concerned. I don't know what the final digit is, but that bull about 'your phone has been or is being tapped' is just exactly that: Bull! How would AT&T know if some customer of Sprint (for example) had his phone tapped by his local telco, at (for example) the request of law enforcement. Whoever spreads these stories (you perhaps? 'urban legend', indeed!) should stop it now. I don't know what the AT&T private network uses that number for, but I can almost assuredly advise you it has nothing to do with phone taps. PAT] ------------------------------ From: e91mw@efd.lth.se (Morgan Widung) Subject: Survey of IT-Consumption in USA Date: 7 Feb 1995 15:05:34 GMT Organization: Lund Institute of Technology, Sweden Is there anyone out there who knows what companies /organizations/ universities that make investigations about the IT-consumption in the US market (everything from multimedia to mobile phone consumption)? Also, where are those investigations made? Sara Fortea work +4646181085 Ericsson Mobile Communications AB memo: ECS.ECSSAFO Ideon Alpha 232 70 LUND SWEDEN PS. As I have no internetaccess from Ericsson, kindly respond via e91mw@efd.lth.se (Morgan Widung) ------------------------------ From: jackp@ogitel.net (Jack Pestaner) Subject: Custom IVR Date: 7 Feb 1995 16:04:31 GMT Organization: OGI Telecomm; Beaverton, Oregon I am evaluating several solutions to an IVR application, and it occurs to me that developing our own using visual voice software may be a cost effective solution. We want to integrate with our NEC2400 PBX, which has an RS232 connection they call Infolink which provides realtime status information from the ACD processor to external IVR equipment. Apparently,it is an open application and NEC will provide documentation. Our initial application is pretty simple--we want to provide queue status information to the caller, and allow the caller after a predetermined time to exit the queue to voice mail, or be returned to the queue. Commercial IVR companies offer systems but want about 40K to do this. I would like to contract with an experienced developer to do this for us if we benefit from it. Please let me know if you or any associates are interested. ------------------------------ From: larsone2@clunix.cl.msu.edu (Erik P. Larson) Subject: Motorola Flip Phone and Low Battery Date: 7 Feb 1995 17:02:27 GMT Organization: Michigan State University I have a Motorola Omega Series flip phone. I've been satisfied with it for the most part, but does anyone know how to disable the low battery warning beep? It's really annoying and it's very easy to check the status of the battery. Thanks, Erik Larson ------------------------------ Date: Tue, 7 Feb 1995 11:19:28 EST From: DNEIBURG@npr.org Subject: Human Intrusion In TELECOM Digest V15 #70, David McCord wrote: > Passed along FYI (For Your Insomnia?) ..... > From: "Mark D. Baushke" > From: fred@cisco.com (Fred Baker) > Subject: Human Intrusion > At a symposium at MIT earlier this year, a representative of the > Communications Workers of America (CWA) began a presentation bemoaning > the loss of union craft jobs among telcos by drawing on the chalkboard > a sketch representing the telco C.O. of the future: [Graphics snipped] > In this picture, there is a single man, a dog and a computer. The > man's job is to feed the dog and the dog's job is to bite the man if > he touches the computer. Years ago, when I first moved to Baltimore, Maryland, I was living in a pretty rough, run-down neighborhood. The only building of any size was a C&P (now Bell Atlantic) CO that towered over the area. To protect vans and other company vehicles, they were parked overnight in an adjoining enclosure, surrounded by a chain-link fence topped with barbed wire. As an additional safeguard, there were two very unfriendly guard dogs released in the enclosure overnight. That continued for about a year after I moved in. The practice ended when, one night, someone stole the dogs ... Dale Neiburg, STC National Public Radio Phone: 202-414-2640 635 Massachusetts Ave., N.W. Washington, D.C. 20001 Internet: dneiburg@npr.org [TELECOM Digest Editor's Note: Dogs make excellent security assistants. The City of Chicago has an auto pound over at 30th and California Avenue right behind Cook County Jail. Anyone whose auto is towed out of a place it should not be parked, along with autos which were stolen, stripped and then abandoned on a street somewhere wind up there in the city auto pound. It is a dreadful place. Along with high barbed wire fences, signs warn against trespassing and caution that vicious dogs roam the premises all night. So walking down the sidewalk past there at night, or a Sunday afternoon or other time when the place is deserted, you see these mountains of stripped, rusted out cars, piles of tires and motor parts everywhere, and three or four really vicious, nasty German Shepherds who constantly jump at the fence, growl, bark and bare their teeth at you as you walk past. You can see the hatred in their eyes. Occassionally, I am told, some fools still climb the fence at night, go in and try to strip an auto left there by the police towing or just outright steal it. On the other hand, it is *good* seeing the dogs with the security people on the subway and elevated trains at night. The rate of crime on public transportation at night -- violent or non-violent -- has gone down quite a bit as a result. Those dogs are kept on a strong leash/strap, with wire muzzles around their nose and mouth so they cannot just go up and take a bite out of someone. But let one of them stand next to you on the train at night looking at you; you *know* the dog would love to take a bite out of your leg if he could. Consequently, people are behaving themselves quite nicely on the subway these days, or rather, these nights and early mornings. Coming home from downtown Chicago on a Saturday night, I went in the subway at Jackson Street about 1:00 AM. Nothing surprises me there; that station is like a zoo at night all the time. A very tall man who appears to be intoxicated and high on something has finished drinking beer. He smashes the bottle on the concrete floor and holding the bottle by its neck is menacing anyone and everyone there with the broken peice of glass. Someone has told the fare collection agent upstairs about this and she has started frantically ringing the security bell; very loud bells with big gongs wired in parallel in all the downtown stations. She presses a doorbell button in her cage with a certain cadence to produce a ringing signal on all the bells to say which station needs assistance. Meanwhile downstairs this fellow is on a rampage, screaming and cursing and threatening anyone who comes near him with that broken bottle he is waving and the overhead bells are ringing loudly, two short, one long ... two short, one long. A woman who is one of the Chicago Transit Authority security representatives comes up about that time with Bruno, her dog. She has no gun, but she does have a club I would hate to be on the wrong end of. She stands about ten or fifteen feet away from this guy and looks him right in the face and yells at him: "You scum! Put down that bottle now! Toss it out on the track! He looks at her and stands there. "I told you to put down that bottle! Sit it down there on the floor or toss it out on the track!" Instead of doing either, he starts toward her waving it. In about two seconds she had bent down and pulled the muzzle off Bruno. All the dogs are trained to respond *only* to a word said by their owners. The word is obviously not 'kill', because all sorts of practical jokers on the trains look at the dogs and say that to them; the dog just keeps watching them, but does not respond. In Bruno's case, the secret word was 'love'. "Go love, Bruno! Love!" To the dog, this meant great fun was at hand. He lunges at the dude, knocked him over and was snarling and fighting with him as the woman kicked the beer bottle out of the way and handcuffed the guy. About this time, Chicago Police tactical officers arrive to back her up; they hussle the guy off into the catacombs, some of the odd, desolate little rooms in the bowels of the subway which connect with the remains of the old tunnel system from a century ago. They take prisoners there to 'interview' them sometimes, and no doubt to administer discipline on the spot, knowing quite well that in our overcrowded court system, the only punishment to be meted out to miscreants on public transportation -- the purse snatchers, pick pockets and others -- will be the punishment afforded them by the police officers who arrested the 'asshole', as in "The asshole was threatening other passengers with a broken bottle. My dog had to take him down ..." It doesn't quite go in the official report in those exact words, you understand. .... PAT] ------------------------------ End of TELECOM Digest V15 #83 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa29124; 8 Feb 95 14:55 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA15752; Wed, 8 Feb 95 09:34:03 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA15745; Wed, 8 Feb 95 09:34:00 CST Date: Wed, 8 Feb 95 09:34:00 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502081534.AA15745@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #84 TELECOM Digest Wed, 8 Feb 95 09:34:00 CST Volume 15 : Issue 84 Inside This Issue: Editor: Patrick A. Townson 700 Problems = 500 Problems (Doug Reuben) Re: NYNEX PIN Security - Extra Airtime? (Ken Weaverling) MVIP Interface? (K.S. Lee) Re: Ten Digit Dialing (Robert Lindh) QUALCOMM Gone Wrong? (Simon J. Wallace) Re: Telstra (Australia) Information Wanted (Sam Spens Clason) Motorola Fones (Antonio Veloso) Re: Phone Number Wanted For Genesys Labs (Joe Sulmar) Dial-N-Save (Jeff Hersh) Re: Cheap Way to Get an 800 Number? (sm@infinet.com) Re: 28.8k bps Modem (Marc A. Randolph) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 500-677-1616 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: dreuben@interpage.net (Doug Reuben) Subject: 700 Problems = 500 problems Date: Wed, 8 Feb 1995 05:24:28 EST Hoping that AT&T learned from its mistakes with the 700 service, I anxiously awaited the availability of their 500 service. Although there are a few impressive features on the system, overall, many people can NOT reach me on it and/or find it awkward. Here are some observations: 1. WHY does it have to say "AT&T" when someone calls 1-500-442-4CID? I don't need people calling me to hear free advertisements for AT&T. I realize that people may wonder why there are AT&T 500 charges on their bills when they may use MCI or Sprint, but having the service say "AT&T" for every call is annoying. Put the info on the bill if needed. 2. Configuration is the same as the 700, ie, I dial 0-500-442-4CID, and enter my PIN. The menu is exactly the same for the "middle" tier service, and is slightly more complicated for the higher-end ("Navigator"?) service. BUT - dialing 0-500 is also the problem. From a cellphone, you need pay for this. I don't want to have to pay each time I want to re-forward my calls to my cellphone, or from one phone to the other. There is really no technical reason why AT&T has to return supervision on 0+500 calls (or 0+ calls in general)...I mean, so if it doesn't work on the last remaining Step-By-Step exchange in Vermont or whatever, fine, but I think there are good deal more people using carphones than served by SXS exchanges where 0+ tone dialing requires a supervision return. The service is useless to me if I need to re-forward it and have to PAY each time I do it. I have no problem paying for use, but to pay airtime to my cellco just to reforward calls is too much. I know you can schedule it to try a few numbers, but I'm not always at the same carphone, and I suspect there are a number of poorly connected cellphone companies where AT&T's system will not be able to tell if the line is busy or no one is there via any other method than a timeout. We intend to use 500-442-4CID for business purposes, (or we'd like to), but if it is too flaky and/or costly to use we just won't bother. 3. Caller ID isn't shown (no surprise there). 4. It doesn't work from Rochester, NY, and all these other telcos which couldn't bill the 700 number directly, either. It doesn't work from most people's PBXs, and it doesn't work from any sort of system which is not directly connected to the local telco, like an outdial from a voicemail box, etc. 5. Most cellular companies do not allow 1+500 billing (even those which AT&T owns), so you need to dial 0-500, resulting in an airtime charge to the caller even if no one answers or the line is busy. This was one of the biggest problems with ER700 -- no one wanted to call me from their carphones after about a month of using the service and seeing all these calls at 80 cents per minute to my 700 when I never even answered. There are other significant problems, but I'll save those for another post. What I do like about the service (and this is more of a result of how 500 numbers work than anything AT&T has done) is: 1. I can tell everyone to just dial 1-500-442-4CID. If it works from your home phone/business phone, great. If you are at a payphone, you can STILL dial 1-500-442-4CID, and it automatically dumps you into the 0+500 menu. This way, people don't have to know 0-500 or 1-500, they just always dial 1-500. (It would be nice if payphones would let you pay for 1-500 with coins, at least for AT&T 1-500 calls.) There is no need for any access codes, alternate instructions, 10xxx codes, or anything. 1-500 does the trick! (Assuming it works at all, which, from many phones and businesses, it does not). The usual problems with having to use the silly 800 number to access the 500 number still apply to many cellular services, most businesses, etc. Most of my friends can't call me from work, so I wonder about how worthwhile the service is for personal use, let alone for business use. 2. I can forward my calls to my 500 number, which although not something which I would often do, is still a feature which the 700 lacked and which would have come in handy from time to time. 3. You can give your callers PINs if you want to pay for the call. This is also a welcome feature carried over from EasyReach 700. Unfortunately, it's also necessary - without giving out PINs to some of my callers, they would NEVER be able to reach me. They call from locations where they need to use the 800 access method and calling card, and do not have AT&T or local Bell calling cards. So because the 500 service is STILL difficult for many people to reach, *I* am forced to pay to allow them to reach me. I had hoped the 500 service would alleviate all this - apparently, it does not. Although a number of these features are an improvement, AT&T needs to do a LOT of work before their 500 service becomes useful enough for me to justify the $7 monthly "Navigator" charge, or even the $4 "middle service" monthly charge. Right now, it is a partially fixed 700 service, but does not go far enough to remedy the major deficiencies of ER700. If there are any other carriers out there who offer a similar service but without all the problems of AT&T's, I'd love to hear from you! BTW - Can International callers access the 500 service by dialing +1-500 etc? I'd be interested in hearing about this as well. (I don't mean via AT&T's thoroughly overpriced USADirect service, rather, I mean as a direct dialed call to the US.) Doug Reuben * dreuben@interpage.net * (500) 442-4CID / (203) 499 - 5221 Interpage Network Services -- E-Mail/Telnet to Alpha or Numeric Pagers & Fax [TELECOM Digest Editor's Note: What an interesting article to find in the mail when I woke up today! Here is why: I was awakened twice during the night (Wednesday early morning) on calls from Europe where people were trying to reach my 500 number -- the only number I give out now. About 5:50 AM Chicago time the phone rang. Someone in London was calling to say someone *they* were dealing with was trying unsuccessfully to reach me and could I advise how to get through. I was too groggy to speak with them for more than a few seconds. Then about 8:00 AM the phone rang again, this time with *someone from AT&T* on the line. He was in New York, and said he was working 'with a customer calling internationally trying to reach me'. So what, I asked ... and this guy (an AT&T employee!) asks me, "What is a 500 number?". Sort of astounded, I asked if he was indeed an AT&T employee and he said he was, but that he had never heard of 500 numbers ... and he worked for the company! I told him it was called 'Personal Number Service'. He wanted to know how callers from international points 'were supposed to get through' and I told him damned if I knew anything about it, I am just an ignorant cust- omer. I suggested maybe they could try USA Direct and see if that worked. That should keep a few people at AT&T occupied and busy today. Then I realized one way to force everyone to call you via AT&T whether they want to use that company or not is by giving 500 as the only possible number to reach you on. Let them argue about it with their telcos, etc. This should prove to be a great help toward maintaining the privacy of your phone number when it is requested on credit applications, etc. No fraud is intended of course .. you *can* be reached via 500. All you have done is just made it a bit harder for folks calling from PBX's and via lame telcos, etc. Plus, its so new, it will still be a novelty for quite awhile ... so let's all give 1-500 as our number; our only number. Either use it or don't get through. Forget the 0-500 unless the person thinks of it on his own as a way to call using a credit card. I certainly do not intend to give out any of those PINS for collect calls to me with the exception of my very immediate friends, etc. I am having lots of fun with this already! PAT] ------------------------------ From: weave@hopi.dtcc.edu (Ken Weaverling) Subject: Re: NYNEX PIN Security - Extra Airtime? Date: 8 Feb 1995 03:15:06 -0500 Organization: Delaware Technical & Community College In article , Doug Reuben wrote: > This raises a question: Normally, for any call which is answered, > billing STARTS shortly after you press SEND, when the system > recognizes/validates your phone and processes your outward call. [...] > Now how does the PIN code fraud feature affect this? I've timed how > long it takes to get the "prompt" to enter your PIN code, and then to > enter the code while driving, and it is about ten seconds. Now do these > tenseconds count? I've wondered this myself. I'm with Bell Atlantic Mobile, which has the same system. One thing I've found out though, you don't have to wait for the tones before you press in your PIN, just make sure the tone sounds before you press SND. Regardless, I hate the entire PIN thing. I don't know why I assigned one to my number. In addition to the above concern, it messes up your last number redial. When I RCL my last number, it's the blasted PIN. It's also a hassle to punch it in whilst driving. Ken Weaverling Computer Services, Delaware Tech College weave@dtcc.edu (My opinions are mine alone, I don't speak for the college) ------------------------------ From: ksl@technet.sg (KS Lee) Subject: MVIP Interface? Date: 8 Feb 1995 08:33:35 GMT Organization: Technet, Singapore Hello, Can someone point me to ISDN card that have a proper implementation of MVIP interface? Please email you suggestion to me. Thanks, Lee, Kok Seng FAX: 65-743-1305 Tel: 65-741-7211 ext 505 Internet: ksl@technet.sg CS :70313,2555 ------------------------------ From: etxlndh@eua.ericsson.se (Robert Lindh) Subject: Re: Ten Digit Dialing Date: 8 Feb 1995 11:43:17 GMT Organization: Ellemtel Telecom Systems Labs, Stockholm, Sweden I think Norway switched to seven-digit telephone numbers for all calls, including "local" calls, approximately one year ago. The reason given was something like "to prepare for new functions in the future". ------------------------------ From: Simon J Wallace Subject: QUALCOMM Gone Wrong? Organization: Edinburgh University Date: Wed, 8 Feb 1995 11:58:17 GMT Hello there. I wonder if anybody can help me with the following questions. 1) What's the difference between Qualcomm's IS-95 and PN-3384 the new PCS derivative? 2) Where are GO communications based? I read this morning that they plan to bring GSM to North America. 3) GO claim to be introducing GSM as CDMA looks unlikely to roll out in the near future. What do other people think? Thanks for any comments. Simon Wallace Masters Student University of Edinburgh sjw@ee.ed.ac.uk ------------------------------ From: d92-sam@black29.nada.kth.se (Sam Spens Clason) Subject: Re: Telstra (Australia) Information Wanted Date: 8 Feb 1995 12:24:42 GMT In britos@scf.usc.edu writes: > Looking for information on this company. Stock Analysis. Assets. > Prognosis. History. etc ... The official story is available on http://www.tansu.com.au. BTW, I have collected some telecom related URLs. If someone has something to add to my list I'd be very glad for (mail) replies. Sam Sam Spens Clason ------------------------------ From: Antonio.Veloso@telecom.ptt.nl (Antonio Veloso) Subject: Motorola Fones Date: 8 Feb 1995 12:28:45 GMT Organization: PTT Telecom B.V. I am looking for MOTOROLA CELLULAR fones and accesories; who can give me some info? I want them for outside the USA. A.Veloso Holland ------------------------------ From: jsulmar@shore.net (Joe Sulmar) Subject: Re: Phone Number Wanted For Genesys Labs Date: 8 Feb 1995 13:41:03 GMT Organization: North Shore Access In article , pkendall@arnold.jfrank.COM (Paul Kendall) says: > Anybody have a phone number for Genesys Labs? I'm interested in their > product line, especially the T-server. Paul: Here's the contact info: Genesys Inc. 1111 Bayhill Drive Suite 180 San Bruno, CA 94066 voice: 415-588-5149 fax: 415-588-5527 I'd like to hear about your application, and your thoughts on the suitability of T-server. I am also presently considering working with this product. ------------------------------ From: Hersh Jeff Subject: Dial-N-Save Date: Wed, 08 Feb 95 09:38:00 PST Some time ago, someone asked if anyone has had any experience with the long distance carrier called Dial-N-Save. At the time, I had also received the promotional flier advertising rates 10% lower than AT&T. These rates were available by dialing the appropriate access code. I have used the code for several calls between NJ and Texas, making calls at times-of-day similar to calls I had placed with AT&T (my "normal" long distance carrier). I received my bill yesterday, and, true to its word, the Dial-N-Save reduced my long distance charges by a little more than 10%. The average call rate went from about $0.17 per minute to about $0.153 per minute. Rates for nite/weekend were a little lower. Other than waiting a couple of seconds longer for ringback, there was no discernible difference in quality. Jeff Hersh hershj@bah.com ------------------------------ From: sm@news.infinet.com (SM Communications And Marketing) Subject: Re: Cheap Way to Get an 800 Number? Date: 7 Feb 1995 19:34:03 -0500 Organization: InfiNet In article , Paul Robinson wrote: >> Some friends and I are starting a new small business. We would like to >> have an 800 number. How do I get one? > You call a long distance carrier's 800 number and tell them you want > one. Within a couple of business days they will turn on the number. >> Other than ATT/MCI/Sprint, are there other people who can provide an >> 800 number cheaply? > Don't know how much you mean by 'cheaply'. My 800 number from AT&T > costs me $8 a month plus usage, which is typically around 20-25c a > minute depending on how far the person is from Maryland. As I > typically have a low calling volume, the costs usually run only $12 a > month or so. Cheaply probably means lower rates than the usual big three rates. For example, Hospitality Services Group has a personal 800 program whereby a person can get a free (and true) 800 number with no montly fees, no setup fees, no minimums, billed in six second increments and only 18 cents per minute, all the time. There are also other 800 services one can get at much lower rates if they volume warrants it.(usually over $50 per month.) And the rate can be as low as 13.5 cents per minute flat rate, billed in six second increments. And if you have a vanity number you can transfer and keep the same number and pay lower fees. Metin sm@infinet.com http://www.infinet.com/~sm ------------------------------ From: mrand@eesun2.tamu.edu (Marc A Randolph) Subject: Re: 28.8k bps Modem Date: 8 Feb 1995 02:09:29 GMT Organization: Dept. of Electrical Engineering, Texas A&M University In article , Paul Robinson wrote: >> 1. Is the bps across the twisted pair wire actually running at 28.8 or >> 14.4 when 28.8 is invoked? Or is it just data compression? > The data is not sent at 28,800 bits per second, however. Typically > the modem will divide up the telephone line into six or more channels, > and run each channel at 2400 to 4800 bits per second. By multiplexing > six channels at 2400 baud, you get 14,400 baud, etc. Sorry, this is not correct. The data IS sent at 28,800 bits per second. The line is not divided into channels either; a phone line can only handle something in the range of 2900 baud (+/- 500 baud or so). Baud means symbols per second, not necessarily characters per second. Here is part of a message from U.S. Robotics that explains it ... [if someone could send me the whole article I would appreciate it, I deleted everything except this extraction - mrand@tamu.edu] From: SUPPORT@usr.com (Robert Chechi) Newsgroups: comp.dcom.modems Subject: V.34 in a Nutshell Date: Fri, 23 Sep 1994 12:23:34 Organization: U.S. Robotics, Inc. V.34: The next-generation modem by Dale Walsh, U.S. Robotics vice president, advanced development [... lots of background deleted...] A V.22 bis, or 2,400 bit/sec, modem sends four bits per symbol and 600 symbols per second to achieve its speed of 2,400 bit/sec. The V32 modem sends four bits per symbol and 2,400 symbols per second to reach its speed of 9,600 bit/sec. V.32 bis sends six bits per symbol and 2,400 symbols per second to achieve 14.4K bit/sec. But V.34 will send up to nine bits per symbol, and 3,200 symbols per second, to achieve 28,800 bit/sec, twice as fast as V.32 bis. [... lots of detailed v.34 info deleted... ] ----------------- Marc Randolph mrand@tamu.edu -or- mar6019@tamu.edu PGP keyID: 4C95994D ...!{uunet,gatech}!tamu.edu!mrand ------------------------------ End of TELECOM Digest V15 #84 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa06512; 9 Feb 95 1:13 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA01929; Wed, 8 Feb 95 20:58:17 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA01923; Wed, 8 Feb 95 20:58:14 CST Date: Wed, 8 Feb 95 20:58:14 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502090258.AA01923@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #85 TELECOM Digest Wed, 8 Feb 95 20:58:00 CST Volume 15 : Issue 85 Inside This Issue: Editor: Patrick A. Townson Communications Decency Act of 1995 (Ben Heckscher) Recommended Least-Cost Network Design Programs? (Jon L. Gauthier) Caller ID on Call Waiting/ADSI (John Combs) Information Wanted on Galaxy Worldwide Communications (Richard Baillie) UCLA Short Course on Advanced Communication Systems Using DSP (W. Goodin) Teletel Micro: How to Win 402.36 FF Pro Connection Hour? (Jean B. Condat) Numbers Numbers Numbers ... (Jim Derdzinski) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 500-677-1616 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Wed, 8 Feb 95 17:19 EST From: Ben Heckscher <0003094996@mcimail.com> Subject: Communications Decency Act of 1995 This is a little difficult to follow unless you have a copy of the Communications Act of 1934 (47 U.S.C. 223) is amended, but it gives you some idea what Senator Exon has in mind. Can you say "big brother"? Source: US Congress Thomas WWW site - 8 Feb 95 Communications Decency Act of 1995 (Introduced in the Senate) S 314 IS 104th CONGRESS 1st Session S . 314 To protect the public from the misuse of the telecommunications network and telecommunications devices and facilities. IN THE SENATE OF THE UNITED STATES FEBRUARY 1 (LEGISLATIVE DAY, JANUARY 30), 1995 Mr. Exon (for himself and Mr. Gorton) introduced the following bill; which was read twice and referred to the Committee on Commerce, Science, and Transportation _________________________________________________________________ A BILL To protect the public from the misuse of the telecommunications network and telecommunications devices and facilities. Be it enacted by the Senate and House of Representatives of the United States of America in Congress assembled, SECTION 1. SHORT TITLE. This Act may be cited as the `Communications Decency Act of 1995'. SEC. 2. OBSCENE OR HARASSING USE OF TELECOMMUNICATIONS FACILITIES UNDER THE COMMUNICATIONS ACT OF 1934. (a) Offenses: Section 223 of the Communications Act of 1934 (47 U.S .C. 223) is amended-- (1) in subsection (a)(1)-- (A) by striking out `telephone' in the matter above subparagraph (A) and inserting `telecommunications device'; (B) by striking out `makes any comment, request, suggestion, or proposal' in subparagraph (A) and inserting `makes, transmits, or otherwise makes available any comment, request, suggestion, proposal, image, or other communication'; (C) by striking out subparagraph (B) and inserting the following: `(B) makes a telephone call or utilizes a telecommunications device, whether or not conversation or communications ensues, without disclosing his identity and with intent to annoy, abuse, threaten, or harass any person at the called number or who receives the communication;' and (D) by striking out subparagraph (D) and inserting the following: `(D) makes repeated telephone calls or repeatedly initiates communication with a telecommunications device, during which conversation or communication ensues, solely to harass any person at the called number or who receives the communication; or'; (2) in subsection (a)(2), by striking `telephone facility' and inserting `telecommunications facility'; (3) in subsection (b)(1)-- (A) in subparagraph (A)-- (i) by striking `telephone' and inserting `telecommunications device'; and (ii) inserting `or initiated the communication' and `placed the call', and (B) in subparagraph (B), by striking `telephone facility' and inserting `telecommunications facility'; and (4) in subsection (b)(2)-- (A) in subparagraph (A)-- (i) by striking `by means of telephone, makes' and inserting `by means of telephone or telecommunications device, makes, knowingly transmits, or knowingly makes available'; and (ii) by inserting `or initiated the communication' after `placed the call'; and (B) in subparagraph (B), by striking `telephone facility' and inserting in lieu thereof `telecommunications facility'. (b) Penalties: Section 223 of such Act (47 U.S .C. 223) is amended-- (1) by striking out `$50,000' each place it appears and inserting `$100,000'; and (2) by striking `six months' each place it appears and inserting `2 years'. (c) Prohibition on Provision of Access: Subsection (c)(1) of such section (47 U.S .C. 223(c)) is amended by striking `telephone' and inserting `telecommunications device.' (d) Conforming Amendment: The section heading for such section is amended to read as follows: `obscene or harassing utilization of telecommunications devices and facilities in the district of columbia or in interstate or foreign communications'. SEC. 3. OBSCENE PROGRAMMING ON CABLE TELEVISION. Section 639 of the Communications Act of 1934 (47 U.S .C. 559) is amended by striking `$10,000' and inserting `$100,000'. SEC. 4. BROADCASTING OBSCENE LANGUAGE ON RADIO. Section 1464 of title 18, United States Code, is amended by striking out `$10,000' and inserting `$100,000'. SEC. 5. INTERCEPTION AND DISCLOSURE OF ELECTRONIC COMMUNICATIONS. Section 2511 of title 18, United States Code, is amended-- (1) in paragraph (1)-- (A) by striking `wire, oral, or electronic communication' each place it appears and inserting `wire, oral, electronic, or digital communication', and (B) in the matter designated as `(b)', by striking `oral communication' in the matter above clause (i) and inserting `communication'; and (2) in paragraph (2)(a), by striking `wire or electronic communication service' each place it appears (other than in the second sentence) and inserting `wire, electronic, or digital communication service'. SEC. 6. ADDITIONAL PROHIBITION ON BILLING FOR TOLL-FREE TELEPHONE CALLS. Section 228(c)(6) of the Communications Act of 1934 (47 U.S .C. 228(c)(6)) is amended-- (1) by striking `or' at the end of subparagraph (C); (2) by striking the period at the end of subparagraph (D) and inserting a semicolon and `or'; and (3) by adding at the end thereof the following: `(E) the calling party being assessed, by virtue of being asked to connect or otherwise transfer to a pay-per-call service, a charge for the call.'. SEC. 7. SCRAMBLING OF CABLE CHANNELS FOR NONSUBSCRIBERS. Part IV of title VI of the Communications Act of 1934 (47 U.S .C. 551 et seq.) is amended by adding at the end the following: `SEC. 640. SCRAMBLING OF CABLE CHANNELS FOR NONSUBSCRIBERS. `(a) Requirement: In providing video programming unsuitable for children to any subscriber through a cable system, a cable operator shall fully scramble or otherwise fully block the video and audio portion of each channel carrying such programming so that one not a subscriber does not receive it. `(b) Definition: As used in this section, the term `scramble' means to rearrange the content of the signal of the programming so that the programming cannot be received by persons unauthorized to receive the programming.'. SEC. 8. CABLE OPERATOR REFUSAL TO CARRY CERTAIN PROGRAMS. (a) Public, Educational, and Governmental Channels: Section 611(e) of the Communications Act of 1934 (47 U.S .C. 531(e)) is amended by inserting before the period the following: `, except a cable operator may refuse to transmit any public access program or portion of a public access program which contains obscenity, indecency, or nudity'. (b) Cable Channels for Commercial Use: Section 612(c)(2) of the Communications Act of 1934 (47 U.S .C. 532(c)(2)) is amended by striking `an operator' and inserting `a cable operator may refuse to transmit any leased access program or portion of a leased access program which contains obscenity, indecency, or nudity. ------------------------------ From: exujlg@exu.ericsson.se (Jon L. Gauthier) Subject: Recommended Least-Cost Network Design Programs? Date: 8 Feb 1995 17:10:48 GMT Organization: EUS/NI/N (Ericsson, Inc.) Reply-To: exujlg@exu.ericsson.se (Jon L. Gauthier) I'm looking for a program to design a multiplexed data network using the add algorithm (see 'Designing Data Networks', Robert L. Ellis, 1986, Prentice- Hall, ISBN 0-13-201864-0). Years ago I wrote one to design multi-drop networks (i.e. SNA) using the Esau-Williams algorithm, but never got around to implementing the add algorithm. Are there any public domain, or share-ware programs available that will take user-supplied tariff data? Or point me to some good commercial ones (like ComNet, BoNes, or whatever ...). Please email responses to me at the address below. Thanks in advance. Jon L. Gauthier Ericsson, Inc. EUS/NI/N Sr. Systems Programmer P.O. Box 833875 +1 214 997-0157 Richardson, TX 75083-3875 e-mail: exujlg@exu.ericsson.com, exu.exujlg@memo.ericsson.se ------------------------------ Date: Tue, 7 Feb 95 23:33 EST From: Testmark Laboratories <0006718446@mcimail.com> Subject: Caller ID on Call Waiting/ADSI In Issue 81 of the TELECOM Digest, the Editor asked for information on Caller ID on Call Waiting to be uploaded again, which might have been referring to my recent submission entitled "How I beat Caller ID." I have been deluged with email requests about ADSI, so here is more detail on how ADSI actually works, as well as all the applicable Bellcore standards. The future of Caller ID lies with ADSI. The acronym stands for Analog Display Services Interface, and it is really a series of Bellcore documents that lay out the new standard. I have received several requests for the names of these standards, which are all covered in Bellcore FR-NWT-000012. They include: TR-NWT-001273 TR-NWT-000030 SR-INS-002461 SR-TSV-002476 SR-TSV-002697 SR-NWT-002495 SR-TSV-002578 In short, ADSI is provided in three different "levels" of service: Level 1: Calling name and number after the first ring. Level 2: Calling name and number with call waiting. Level 3: A telephone with a display screen. (The "D" in ADSI.) Remember, originally Caller ID was just the phone number of who was calling, displayed after the first ring. Then, the service was improved to show both the number AND the name of the incoming caller. ADSI Level 1 is just that service, and it displays the incoming number and name after the first incoming ring. ADSI Level 2 delivers the calling number and name during call waiting by sending a short, low level sound called CAS tone, which the person on the receiving end WILL hear for a tiny fraction of a second, but it's not obnoxious. The CAS tone alerts the ADSI Level 2 phone to open the receive path to the user's earpiece, then the phone accepts a short burst of Bell 202-type modem info. The reason that this "obsolete" modem type was used is simple -- it requires none of the tedious "training time" that modern Trellis-encoded modems must have to handshake. The entire interruption in the listening path is only about a third of a second, then the incoming call number and name are displayed. If the receiving party has Caller ID with call waiting enabled on their phone line, but the phone they currently are talking on is NOT an ADSI phone, they will hear the CAS tone, but when the CO doesn't get the proper response back from the phone, it will NOT send the burst of modem tone with information. The proper response is a DTMF digit, that is how ADSI phones talk back to the CO or an ADSI server not owned by the telco. By the way, if two users are off-hook on the line, and only one is ADSI Level 2 compliant, when a CAS tone comes in, there will be no Caller ID on call waiting, as an ADSI Level 2 device must momentarily hang up, and check the line voltage to see if another phone is off-hook before going back off-hook and acknowledging the CAS tone. This is to prevent annoying bursts of modem tone in POTS phone users' ears. (I'm not sure what happens if BOTH phones are ADSI Level 2 -- if the timing requirements are tight enough for when they briefly hang up and check, they wouldn't see each other, and BOTH would go back off-hook and acknowledge the CAS tone. I don't have time to research it right now. Perhaps someone from Bellcore could comment, if they know ...) ADSI Level 3 came about because Bellcore did a study to determine how to sell more features on a telephone line, such as call waiting, or call forwarding. (The RBOCs like to sell these extra features as they are revenue above the standard line charge, and quite profitable.) The study concluded that many people didn't buy extra features because they didn't want to fool with code sequences to enable/disable features, such as *69. Bellcore's solution was ADSI Level 3. These phones have a screen that must be 20 characters across by 6 rows, and can be 40 characters across by more rows. There are from four to six "softkeys." Menu trees of softkeys can be downloaded to an ADSI phone, and stored in memory as a "script." The user gets plain English displays (or the language of your choice), and can press softkeys to activate telco features, or even order new ones directly from the phone without talking to a customer representative! Some of the RBOCs have also expressed interest in using the ADSI Level 3 phones for electronic white and yellow pages, Bell Atlantic comes to mind. Please note that an ADSI Level 3 session is also initiated from a a privately-owned ADSI server by a brief CAS tone. (Things work differently between the ADSI phone and the CO itself to change calling features.) The actual modem communication is always ONE-WAY, from the CO or privately-owned ADSI server TO the ADSI phone. This is because most information will be sent TO the phone in real life, the phone merely needs to respond with brief sequences of DTMF tones to indicate what softkeys the user has pressed. The user won't hear any of this, the receive and transmit paths are opened during ADSI Level 3 communication. Also remember that the far-end of the call will NEVER be a human listener, it will either be the CO, or a private ADSI server owned by a business. If there is an "achilles heel" to ADSI, this is it ... it can take up to two minutes to download a maximum-length, complicated script to an ADSI phone. An ADSI-compliant phone must have enough memory to hold at least four different scripts, so if one calls the same ADSI servers on a regular basis, this might not be a problem. Also, a smart programmer will probably only download short pieces of script to a phone, and then, while the user is reading the new options, they can download a bit more. The REAL attraction of ADSI is that ANYONE can have their own ADSI server! After all, it's designed to work on analog lines. In a couple of years, a screen phone will be used to call the local video store, scroll through the new releases, and even reserve one for later pickup. Or, perhaps one could call Domino's, order a pizza and toppings. Just imagine calling a business, and instead of getting the tedious voice mail prompts telling you to press *1 to do something, you get a text screen that lets you scroll though a directory of employees and select who you want! The high end ADSI phones that I have tested even have things like pull-out QWERTY keyboards for data entry, PCMCIA Type I slots, "smart card" slots, and magnetic strip card readers! Bellcore deserves praise for this well thought out service, laid out in several Bellcore standards. Another smart move on their part is that they didn't bother submitting the standard to an international standards body to try to get it adopted. (We all know how long that takes.) Instead, they have been visiting the PTTs of dozens of countries, and trying to convince them to sign on to the ADSI standard as defined by Bellcore. Several European nations have expressed interest already, as have Pacific Rim nations, including China. ADSI is being field-trialed by a few RBOCS right now, including Ameritech in Chicago. Ameritech is selling high-end Philips P-100 ADSI screen phones at cost for only $200 each, and primarily marketing it for enhanced banking features from your home, along with the ability to easily order/change custom calling features. It is estimated that there will be between 5 and 15 million ADSI Level 3 screen phones in North America by 1998, and I suspect the higher number is more accurate. Once you've tried one, you don't want to give it up! It is my opinion that ADSI, along with V.34 modems giving true 115 kbps data throughput (via V.42bis compression), could be an ISDN BRI "killer" one-two punch. ISDN is STILL not ubiquitous, the local telcos don't understand it and don't sell or market it effectively, and it will NEVER be offered in the boondocks where I live. (Mayo, Kentucky) In closing, perhaps the Editor will permit a small plug for my employer. TestMark Labs is currently the ONLY alternative to Bellcore itself, if you want your ADSI product tested for compliance to the full Bellcore requirements. John Combs, Project Engineer, TestMark Laboratories, testmark@mcimail.com [TELECOM Digest Editor's Note: Thanks for resubmitting this. Even though it appeared here not that long ago, it seems many readers missed it the first time around, and I think this is an exciting development where Caller-ID is concerned; exciting enough to be certain all interested readers are informed. PAT] ------------------------------ From: Richard Baillie Subject: Information Wanted on Galaxy Worldwide Communications Date: Tue, 07 Feb 95 20:17:00 EST Looking for information on this company. Said to have been incorporated in July, 1994 after having launched as a division of a publicly traded (?) U.S. company the prior year. ------------------------------ From: BGOODIN@UNEX.UCLA.EDU (William R. Goodin) Subject: UCLA Short Course on Advanced Communication Systems Using DSP Date: Tue, 7 Feb 1995 10:18:52 Organization: UCLA Extension On April 3-7, 1995, UCLA Extension will present the short course, "Advanced Communication Systems Using Digital Signal Processing", on the UCLA campus in Los Angeles. The instructors are Bernard Sklar, PhD, Communications Engineering Services, and frederick harris, MS, Professor, Electrical and Computer Engineering, San Diego State University. This course provides comprehensive coverage of advanced digital commun- ications. It differs from other communications courses in its emphasis on applying modern digital signal processing techniques to the implementa- tion of communication systems. This makes the course essential for practitioners in the rapidly changing field. Error-correction coding, spread spectrum techniques, and bandwidth-efficient signaling are all discussed in detail. Basic digital signaling methods and the newest modulation-with-memory techniques are presented, along with trellis-coded modulation. Topics that are covered include: signal processing overview and baseband transmission; bandpass modulation and demodulation; digital signal processing tools and technology; non-recursive filters; channel coding: error detection and correction; defining, designing, and evaluating systems; signal conditioning; adaptive algorithms for communication systems; modulation and coding trade-offs and bandwidth-efficient signaling; and spread spectrum and multiple access techniques. Each participant receives a copy of the text, "Digital Communications- Fundamentals and Applications", by Bernard Sklar. For additional information and a complete course description, please contact Marcus Hennessy at: (310) 825-1047 (310) 206-2815 fax mhenness@unex.ucla.edu ------------------------------ Date: 07 Feb 1995 07:23:35 GMT From: JeanBernard_Condat@email.FranceNet.fr (JeanBernard Condat) Organization: FranceNet Reply-To: JeanBernard_Condat@email.FranceNet.fr Subject: Teletel Micro: How to Win 402.36 FF Pro Connection Hour? Bonjour, A new product is born today on the France Telecom catalogue: the "Teletel Micro." It's a transparent access for micro-computers connection between 300 and 14,400 baud on a single phone line (V22, V22bis, V32, V32bis with MNP4 and V42, and perhaps V34 [=28,800 baud]). All the hosts will be connected to Transpac and available all over France. Five numbers are already available for first time tests and evaluations: - 36011414: 0.59 FF/min (0 FF for the host); - 36011616: 1.27 FF/min (33.37 FF/hour for the host); - 36011717: 2.19 FF/min (75.28 FF/hour for the host); - 36012828: 5.48 FF/min (226.31 FF/hour for the host); - 36012929: 9.29 FF/min (402.36 FF/hour for the host). The forwarding of a service on another service will be only possible on same level billing services. France Telecom look at some companies able to give new ideas and/or realisations on this Teletel Micro. The contact person is Mr. Gerard Monin (phone: +33 1 44447299, fax: +33 1 44447831). Jean-Bernard CONDAT +33 1 47874083, desk 47874949 IPA Groupe SVP fax +33 147878811 JeanBernard_Condat@email.FranceNet.FR telex 233999 S V P F B.P. 155, 93404 Saint-Ouen Cedex, France Pager Kobby: 06 49 09 52 ------------------------------ Date: 07 Feb 95 00:25:30 EST From: Jim Derdzinski <73114.3146@compuserve.com> Subject: Numbers Numbers Numbers ... I have been following the news accounts and the threads here regarding the suggestion that Chicago area telephone users dial 11 digits on all calls. First of all, I think this idea is absolutely nuts. It seemed perfectly logical to me that Ameritech was introducing 630 as an overlay code for cellular, pagers and other wireless services. That way, one could tell by the number who/what they were calling. It would also be quite simple as follows: 630 to 630 - dial seven digits, 312 to 312 - dial seven digits, 708 to 708 - dial seven digits, anything else, do the 1-plus NPA thing. Then we get all this crap from these other companies complaining about the impact it will supposedly have on their customers, and how Ameritech will take up all the "good" numbers, etc., etc. First of all, my decision to buy a cellular telephone or pager or whatever service would be based on a NEED for, the PRICE of and the QUALITY of the actual device/service -- not the NUMBER that it will be assigned. Who started this concept of "good" numbers anyway? I order whatever telephone service, the clerk gives me the number, and I'm on my way. Am I the only one who doesn't care about the number assignment? I am basically a regular POTS customer who doesn't yet have a need for these companies' services. However, after reading about the dial-11-digit idea, I can't help the feeling of being manipulated by a bunch of startup companies (most of whom probably won't even exist five to ten years from now) by having to dial 11 digits to call my upstairs neighbor. If these issues are such a problem, I think it's time for Bellcore to devise a new nationwide numbering plan that will address all of these problems. We did it 35-40 years ago and got over it, I think we can do it again. Any thoughts? ------------------------------ End of TELECOM Digest V15 #85 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa08787; 9 Feb 95 3:22 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA05000; Wed, 8 Feb 95 23:06:05 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA04993; Wed, 8 Feb 95 23:06:02 CST Date: Wed, 8 Feb 95 23:06:02 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502090506.AA04993@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #86 TELECOM Digest Wed, 8 Feb 95 23:06:00 CST Volume 15 : Issue 86 Inside This Issue: Editor: Patrick A. Townson Access to "500" Numbers (Richard Cox) 500 Service Comments (Jeff Buckingham) Voice Delay Standards Information Wanted (Alex Zacharov) Voice Teleconferencing (TNTPKT) A Problem With 205/334 DA (Scott D. Fybush) GO Communications (Steve Samler) Radio Amateur Telecommunications Society WWW Page (Andrew Funk) ICA Annual Conference/Supercomm '95 - Mar 19-23 - Anaheim, CA (Bob Harper) Re: LD Termination Fees to RBOCs (John Combs) Re: LD Termination Fees Charges (Jerry Harder) Re: Information Wanted on MagNet Communications (Christopher H. Snider) Re: Can Anyone Recommend Excell LD Phone Service? (Christopher H. Snider) Re: Plumber Arrested: Fraudulent Call Forwarding (Jim Ancona) Re: Memorex PBX Help Needed (John Combs) Re: Ten Digit Dialing (Bob Goudreau) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 500-677-1616 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: Wed, 8 Feb 1995 11:04:47 -0500 From: richard@mandarin.com Subject: Access to "500" Numbers PAT said: >> Anyway, feel free to call me at any reasonable hour: 500-677-1616 But not, it seems, from outside the mainland US! Callers from the UK are told that the number "has not been recognised" and when I asked British Telecom why this is so, they insisted that the numbers do not even exist. Pressed on this point, BT contacted AT&T who (initially) said the same thing but later had to admit that the numbers do exist, and that they STILL had not "officially" told BT about them -- and as a result BT had not put the necessary data about these numbers into the international access switches in London. It seems BT will be discussing this with AT&T, MCI and Sprint later today, and we just might be able to call you later this week. But until then, UK customers simply can't call US 500 numbers. And when we DO get access, we'll all remember the time difference before we make that call, right? Richard D G Cox Mandarin Technology, PO Box 111, Penarth, South Glamorgan CF64 3YG Voice: 0956 700111; Fax: 0956 700110; VoiceMail: 0941 151515 e-mail address: richard@mandarin.com; PGP2.6 public key on request [TELECOM Digest Editor's Note: Oh -- so that was you Wednesday morning at 6 AM Chicago time was it? And then about 90 minutes later, more or less 7:30 AM I get a call from a fellow at AT&T in New York, in what he called 'International'. *He* wanted to know what is a 500 number. It seems lots of folks who work for AT&T have not even heard of this new service. Is that wild or not? So ... you badgered BT and AT&T from your end; I humiliated that poor fellow from AT&T on my end; maybe some good will come from it all later this week as you point out. I'd like to think you and I were responsible for getting access started from the UK to the USA on 500 numbers; but that may be delusions of grandeur on my part. In a related message on this topic, presented next in this issue, Jeff Buckingham wonders what all the fuss is about with 500 numbers and discusses a product from his company which is almost identical. PAT] ------------------------------ Subject: 500 Service Comments From: Jeff_Buckingham%CallAmerica@emailusa.com (BUCKINGHAM, JEFF) Date: 08 Feb 95 11:59:55 EST I continue to be amazed at people's fascination with 500 numbers. Why is everyone putting up with so many problems just to receive a phone call? The irony to me is that the type of number does not have anything to do with the service that it's pointed to. I have a virtual number service (MyLine) with a local DID number and an 800 number. The 800 number works from anywhere in the US and Canada, from all hotels, payphones, PBX's, etc. The local number works locally and from international locations. I have a locator service that works today, without any problems. I know that AT&T sets things up in very strange ways (PIN numbers and AT&T recordings) but there are several virtual number providers out there today providing service that works on 800 and DID. I may point a 500 number (I have the 545 prefix reserved) to my virtual number if they ever work all the problems out but at least people will be able to reach me for the immediate future. All I am suggesting is that we stop the insanity and use the numbers we want to point to the services that we want. Jeff Buckingham jbucking@callamerica.com 805-545-5100 fax 805-541-7007 [TELECOM Digest Editor's Note: 'My Line' is a very good service. I have mentioned it before here, but newer readers may not know about it. In the past, one complaint about 800 numbers was that they could not easily be forwarded from one location to another throughout a busy day. None of the big three thought it was worth doing. Then Cable & Wireless came along with forwardable 800 service, but you had to pay an extra fee each month if you wanted the ability to automatically switch destinations. Enter 'My Line': Your own personal 800 number, not one of the gimmicks like MCI where you dial a number in common to everyone and enter a PIN. Persons calling your 800 number here a recording in your voice saying something like 'Hi, this is Pat ... please stand by while your call is transferred to me.' The switch then outdials the call to wherever you have told it you will be. Callers can enter a two digit 'override code' (if you told them about it and what code to enter) and this will force the call to be transferred to your 'priority' number instead of your 'normal' call forwarding number. You can toggle between 'call forwarding' and 'number referral'. In the latter case, instead of actually outdialing the call to you, the switch announces that 'calls are being taken at XXX-XXX-XXXX.' Priority calls still get outdialed directly to you of course, provided the caller entered the customer-defineable priority code. Voicemail is part of the package when you fail to answer; the switch withdraws the outdialed call and puts it in voicemail instead. 'My Line' also offers callback service for international calls, along with 'Wake Up Service'. You tell it when to call and wake you each morning. You use these additional features by entering your PIN during the initial recorded announcement. When it starts talking ("Hi, this is Pat, please hold, etc") you punch in your passcode right over the announcement; it switches to maintainence mode with the prompt, "My Line is ready". You change your call forwarding, listen to voicemail, etc. Best of all is the pricing. 'My Line' costs about the same as the plain vanilla 800 service you get from the Big Three, but they don't offer all the bells and whistles. Really, I don't understand why anyone these days would subscribe to 800 service from the Big Three when you can get so many extras from smaller carriers like My Line. This is the same company which offers 'Call America' 800 service, also discussed here in the past. I think John Levine and a few of you subscribe to that one; I do also. (Yes, I have two 800 numbers, two 700 numbers, my new 500 number, and three 708 numbers. That's not counting my pager; also a 708 number.) Anyway, please send off email to Jeff Buckingham, or call or fax. He'll send you complete details on 'My Line'. I've used this service for about a year now and am very pleased with it. You'll like it also. Here is his .signature again: jbucking@callamerica.com 805-545-5100 fax 805-541-7007 Whenever I run messages about My Line -- and I am quite impressed with the service -- I always get a message within a day or two from Arch Telecom telling about their version of the same thing. I imagine they will write again, and if so, I'll tell you about that one also. PAT] ------------------------------ From: alexz@tmx100.elex.co.il (Alex Zacharov) Subject: Voice Delay Standards Information Wanted Date: Wed, 8 Feb 1995 16:49:12 GMT Organization: Telrad Ltd. Voice packetzation and compression introduce some delay. I am looking for information on the following: 1) Standard recommendations for end-to-end delay with echo cancellation. 2) Standard recommendations for end-to-end delay without echo cancellation. 3) Standard recommendations for CPE delay (i.e. maximum delay that is allowed to be introduced by CPE which performs voice compression/ packetization). I am especially interested in this one. I am interested in European and American standards. Any information will be appreciated. Regards, Alex alexz@tmx100.elex.co.il ------------------------------ From: tntpkt@aol.com Subject: Voice Teleconferencing Date: 8 Feb 1995 17:50:37 -0500 Organization: America Online, Inc. (1-800-827-6364) Reply-To: tntpkt@aol.com Hi! Can anyone provide me with the name/number of a firm capable of doing voice teleconferencing? The "Big 3" have the service, but want a good deal for it. We are a small chemcial R&D shop in need of having five to seven parties thru out the US joined in a voice teleconference on a regular basis. Thanks in advance for your assistance! Tim ------------------------------ From: fybush@world.std.com (Scott D Fybush) Subject: A Problem With 205/334 DA Organization: The World Public Access UNIX, Brookline, MA Date: Wed, 8 Feb 1995 04:46:40 GMT Has anyone ever gotten this message from 205-555-1212 or 334-555-1212?: "Due to a high volume of calls, your call cannot be completed. Please try again later." (paraphrased, but you get the point) That's how my calls to both numbers were answered Monday afternoon around 1pm Eastern. I tried through several carriers, and even used one of my company's tie lines that dials out from 908 instead of 617. Calls to other points in Alabama (well, at least to 334-479) completed properly. Later in the day, calls were again being completed properly to Alabama DA. So ... anyone know what happened? By the way, my company's internal phone system does not yet recognize 334, or for that matter 360 or 630. The "real" NYNEX phone lines at work and at home are functioning correctly now. Scott Fybush - fybush@world.std.com [TELECOM Digest Editor's Note: Does anyone know what happened? Yes, I know what happened: ahem! Due to a high volume of calls, telco was unable to complete your call. The recording was rather self-explanatory wasn't it? It is another way of saying 'all circuits are busy now; please try your call again later.' At the time you called, DA was probably swamped with calls coming out their ears and other orifices. It happens, especially if their computer was down and they were doing manual lookups on microfilm or from books. They probably had every operator, clerk, typist, supervisor and secretary at their disposal taking calls and they were still getting buried alive. Calls to other points completed properly because other points were not swamped with calls waiting in a queue for an answer. You get caught up in that rush here in 312/708 occassionally also; but unless it is really severe they don't tell you to call back another time; they just hold you in a queue with an endlessly repeating message that, ' ... all positions are busy; please wait, an operator will be with you shortly ...'. They have really cut back on help answering calls to Repair; here in Chicago it is totally automated now. When you dial 611 you do *not* get connected at all to a live person unless you specifically bail out at one of the prompts. You punch the buttons to tell them the number you are calling from, and you punch the buttons to answer multiple choice questions about what is wrong with your service. I'd say you just hit them on a bad day in Alabama, or at a bad time. PAT] ------------------------------ Date: Wed, 8 Feb 1995 14:57:43 -0500 (EST) From: Steve Samler Subject: GO Communications GO and Northern Tel had a press release last week (1/30) about GO committing to purchase 346 million dolllars of equipment for their PCS system. The release had the following contacts and phones: Steven Zecola Pres and CEO GO David Lowry Chf. Tech Officer GO Norhtern Tel contacts Mark Buford 214 684 8512 Frank McNally 703 712 8374 Phillips and Associates (PR firm?) Scott Phillips 312 943 8858 There was no location given for GO nor were there phone numbers. ------------------------------ From: kb7uv@panix.com (Andrew Funk) Subject: Radio Amateur Telecommunications Society WWW Page Date: 8 Feb 1995 15:15:05 -0500 The Radio Amateur Telecommunications Society is now on the Web: http://www.webcom.com/~arfunk/rats.html From here are links to various RATS projects, including the ROSE X.25 Packet Switch, etc. Andrew Funk, KB7UV Tech Producer/Editor Internet: kb7uv@panix.com WCBS-TV Channel 2 News http://www.webcom.com/~arfunk/ New York, NY USA ------------------------------ From: intlcoma@onramp.net (Bob Harper) Subject: ICA Annual Conference/Supercomm '95 - Mar 19-23 - Anaheim, CA Date: 8 Feb 1995 20:27:15 GMT Organization: ICA Reply-To: intlcoma@onramp.net International Communications Association 1995 Annual Conference 15 tracks with over 80 dcom sessions 23 in-depth tutorials (Full and Half) day. Web Address URL = http://www.onramp.net/ica/ ICA E - Mail icadls@seas.smu.edu ------------------------------ Date: Wed, 8 Feb 95 00:30 EST From: Testmark Laboratories <0006718446@mcimail.com> Subject: Re: LD Termination Fees to RBOCs For what it's worth, when I was still a GTE employee (Jan. '92), I viewed a videoconference by Kent Foster (a senior executive of GTE) sent via scrambled satellite broadcast to all employees. The topic of this discussion was why GTE was laying off yet more employees even though it had shown record profits the previous year. For the last few years, GTE had been consolidating on providing local phone service, and selling off other branches that weren't directly related, such as GTE Sylvania, and, thank goodness, GTE TestMark Laboratories. However, Kent actually admitted that for each $1.00 of local service that GTE sold, it cost them $1.28! The only reason GTE was profitable was the subscriber line charge for long distance access, plus the lucrative intra-LATA long distance market! Since these two sources of revenue are definitely doomed, GTE had to continue laying off employees so they could become cost-competitive in the local service area, their chosen area of competition. He actually went on to discuss scenarios where local competition was allowed, e.g., cable companies providing local phone service, along with "cream-skimmers" putting fiber rings to steal away large businesses in the main cities where GTE did business. If 40% of GTE's business was lost in those prime areas, the company might actually collapse due to insufficient revenues to service the huge long-term debt all telcos incur because of CO and outside plant purchases! It is a fact of life that for the last century, the various state PUCs and the FCC have treated local service as a RIGHT of citizens, and they kept local service rates artificially low so widows and orphans could afford phone service. According to Kent Foster, GTE would almost have to double local service basic rates to make a decent profit margin on the service, but the PUCs would never allow it. So, we have Catch-22. The FCC doesn't want the cost of local service to rise, but they are allowing intra-LATA long distance competition now, and the long distance providers are pressuring GTE and the RBOCs to lower or eliminate the long distance access charge. (Don't forget, AT&T recently bought a huge cellular company, which is definitely one way to bypass long distance access charges! And, MCI announced a 20 billion dollar plan to put in their own local service options in their twenty-largest markets, another "cream-skimming" operation!) If the FCC doesn't acknowledge reality, we might end up with the cost of local phone service suddenly jumping to impossible prices in the rural areas, while dropping slightly in the large cities. This scenario is made more believable by the fact that GTE stock has basically been a non-performer for the last few years, in spite of new record profits each and every year! The investors obviously think they know what the future holds for GTE and the RBOCs! John Combs, Project Engineer, TestMark Laboratories, testmark@mcimail.com ------------------------------ Date: 08 Feb 95 20:49:08 EST From: rta <75462.3552@compuserve.com> Subject: Re: LD Termination Fees to RBOCs Fred R. Goldstein writes in Volume 15, Issue 82 > That happens to be the way Feature Group trunks are priced. Of course > the whole trick to FG pricing is that it's intended to be "contributory" > (profitable). This comes from the old separations game of "splifs", > for "subscriber plant factor" (SPF). In that game, the average usage > of LOCAL lines is divided into interstate and intrastate baskets. The > interstate portion is MULTIPLIED by SPF and then the total cost is > divided amongst the two jurisictions. Given SPF of 3 (old ballpark; I > don't know what it is now), then if 15% of calls in a jurisdiction > were interstate, then the cost would be divided 85:45 to local/interstate. > The subsidy, folks, is in the splifs. > Interstate cost is currently divided into the part paid via tolls and > the part paid via CALC ($3-6/mo "access charges"). The toll-usage > part is divided into different components and adds up to 3-5c/minute/ > side-of-call for most telcos. In practice, only residential and small business customers pay these rates. My clients primarily, Fortune 500 and governments, typically utilize DS1, leased fiber from the LEC, or CAPs to avoid these charges. Another way costs have been increased this that the SPF is based on the *cost* of providing switches. Since most of these were installed under *rate based* regulation, the LEC had every reason to oversize the switch and to *gold plate* the switch as well as the local trans- mission facilities. It is correct that much of the cost for long distance is due to SPF. But this begs the question as to why the SPF ratios were set the way they were. Large and medium size business provide the majority of LD revenues in the US. Residential and small businesses account for the bulk of the lines and voters. From a political and regulatory perspective it made and still makes sense to have business customers, particularly large business customers, subsidize small business and residential customers. The key question in the long run is whether residential and small business customers will accept higher rates or will they turn to the political process to reverse the current trend to increased competition for LD access and ultimately for local service. Jerry Harder Senior Partner Renaissance Telecommunciations Associates 615-231-6126 754623552@compuserve.com ------------------------------ From: Christopher Harwood Snider Subject: Re: Information Wanted on MagNet Communications Organization: University of Virginia Date: Wed, 8 Feb 1995 15:26:23 GMT franjo03@dons.ac.usfca.edu writes: > I would like to know whether anyone here has heard of MagNet > Communications. They are one of those new long-distance carriers that > offer flat-rate billing at six-second increments. I am new to this > type of industry and would like to get some people's opinions (if they > have any) before and if I am to convert my LD service. Any opinions > that you might have would be greatly appreciated. Magnet is a multilevel marketing reseller. I do not know anything about their rates or marketing plan other than that. Personally, I would avoid resellers for business lines. Regards, Christopher H. Snider Telecommunications Consulting American Access chs2c@virginia.edu ------------------------------ From: Christopher Harwood Snider Subject: Re: Can Anyone Recommend ExcelL LD Phone Service? Organization: University of Virginia Date: Wed, 8 Feb 1995 15:30:08 GMT sascjt@unx.sas.com writes: > A friend of mine and her mother are Marketing Reps for Excel LD phone > service. They say that they can save me a significant amount of money > over AT&T, my current LD carrier. Their examples are the differences > in charges for one-minute phone calls. EXCEL has lower flat rates, > while AT&T charges more for the first minute, but they virtually are > identical for longer calls (avg. time: 10 minutes). EXCEL also charges > a $3.00 flat fee for their service. Excel is a multilevel marketing reseller. Like I said in another followup, I would not trust a business line to a reseller. The rates that I have seen from resellers are generally better than those of the Big Three, but there is a risk involved. Regards, Christopher H. Snider Telecommunications Consulting American Access chs2c@virginia.edu ------------------------------ Subject: Re: Plumber Arrested: Fraudulent Call Forwarding From: janco@atluw01.dbsoftware.com (Jim Ancona) Organization: D & B Software Date: Wed, 08 Feb 95 09:55:01 EST In article , TELECOM Digest Editor noted: > [TELECOM Digest Editor's Note: This same report appeared in > alt.dcom.telecom today submitted to that newsgroup by Jack Decker who > concluded by saying this was a good reason telcos should password > accounts, presumably to prevent fraudulent Call Forwarding among other > things. The thing he neglected to mention -- nor was it mentioned by > Dave Levenson here -- was that Call Forwarding Ultra (or Enhanced Call > Forwarding or Remote Call Forwarding as it is known in other telcos) > *does* require a password. I believe what Jack was saying was that BILLING ACCOUNTS should have a PIN, to prevent unauthorized individuals from changing service. Apparently what happened in this case is the bad guy called the telco claiming to be one of his competitors. He ordered the remote call forwarding service on their lines, then used it to forward their lines to his number. Note that since HE (the bad guy) ordered the service, HE got to supply the PIN. Another simple way for telco to prevent this sort of thing would be to call back the customer requesting the change, and ask him to verify it. Jim Ancona janco@dbsoftware.com jpa@iii.net ------------------------------ Date: Wed, 8 Feb 95 10:50 EST From: Testmark Laboratories <0006718446@mcimail.com> Subject: Re: Memorex PBX Help Needed Sergei Fishel wrote in TD#78 that he was looking for proprietary phones for a Memorex PBX, and he wondered why they used six wires. The first generation of "hybrid" digital phones, which appeared in the early 1980s on digital PBXs were almost all six wires, with the outermost pair being DC power to the phone, the next pair being digital control for signalling, and the innermost pair being analog voice, which sometimes also carried DTMF tones generated by the phone. Four wire digital phones came a little later in the eighties, and they typically "simplexed" the DC power onto the data and analog voice pairs. "Modern" digital phones are truly digital, and they send digital packets on the single pair, which also feeds DC power to the phone. One unforeseen side effect of this final digital PBX phone design is that it is a modem "killer." People working in offices with digital PBX phones are often unaware that these phones aren't POTS, so they will unplug their proprietary digital phone and plug in their modem (or fax machine). Many brands of digital PBXs supply 300 mA or more to their digital phones, and this will burn up the front end of a POTS modem or fax machine. (Sometimes it even sets the device on fire!) Since Sergei's Memorex phones are six-wire, this suggests they are fairly old, and probably not manufactured anymore. I recommend that he keep reading TELECOM Digest for a week or two, there are a few resellers of old phone equipment who put ads in every so often. John Combs, Project Engineer, TestMark Laboratories, testmark@mcimail.com ------------------------------ Date: Wed, 8 Feb 1995 12:11:11 -0500 From: goudreau@dg-rtp.dg.com (Bob Goudreau) Subject: Re: Ten Digit Dialing Wes Leatherock writes: > In the Dallas-Fort Worth metropolitan area, you must dial 10 > (not 11 digits) if you are dialing a call to a local number in the > other area code. (Dallas is in the 214 NPA, Fort Worth in the 817 > NPA.) Will the local telcos ever fix this? By "fix", I don't mean eliminate the ability to dial an inter-NPA local call with only 10 digits; I mean eliminate the prohibition against dialing them with the full 11 digits. Likewise for local calls in the same NPA, of course. > Note that almost all telephone service in the Dallas-Fort > Worth area is flat rate. A local call generates no billing whatever > (except for the very few message rate customers). This is true, I > believe, almost everywhere in the United States except in the > Northeast and in the Chicago area. I think your blanket indictment of the entire Northeast is too strong. Aside from New York City, what other parts of the region mandate Measured Local Service for all residential customers? Meanwhile, Tad Cook writes: > Chicago is a unique case though. Chicago will have an overlay area > code, and since someone using a phone within Chicago could possibly > have no idea what area code it is in, this means that all local calls > must dial the area code and number, since phones right next to each > other could be in different NPAs. Chicago is hardly a unique case. The first overlay NPA (917) went into effect several years ago in New York City, where it overlays 212 and 718. True, 917 was originally reserved just for wireless and (I think) fax and data lines, but I doubt that convention will survive another fill-up of 212. With a bunch of new overlay NPAs coming soon (Houston, Miami, Los Angeles and possibly Atlanta), it will be interesting to see what kinds of dialing plans emerge. > In the rest of North America, we are having to dial the area code for > all long distance calls within the area code, so that the system can > handle the new area codes that look like prefixes. This is not true either. Actually, it's true for *most* of the rest of the NANP, but there are a handful of states (NY and IL among them) which instead went with a 7D dialing plan for intra-NPA long distance. Bob Goudreau Data General Corporation goudreau@dg-rtp.dg.com 62 Alexander Drive +1 919 248 6231 Research Triangle Park, NC 27709, USA ------------------------------ End of TELECOM Digest V15 #86 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa09573; 9 Feb 95 4:55 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA06693; Thu, 9 Feb 95 00:20:17 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA06687; Thu, 9 Feb 95 00:20:15 CST Date: Thu, 9 Feb 95 00:20:15 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502090620.AA06687@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #87 TELECOM Digest Thu, 9 Feb 95 00:20:00 CST Volume 15 : Issue 87 Inside This Issue: Editor: Patrick A. Townson North Pacific Cable Cut? (Stephen Palm) SVNet Meeting February 15: Cellular Digital Packet Data (Paul Fronberg) Rolm 6200/b CBX Information Wanted (Christopher L. Browne) Re: MCI Gave me a Deal (Tony Pelliccio) Re: MCI Gave me a Deal (Lindsay L. Meeks) Re: How I Fooled Caller ID (Anthony Chor) Re: How I Fooled Caller ID (Shawn Gordhamer) Campus Wiring/Connectivity Innovation (routers@halcyon.com) Re: Clock Slips Again (Harold Hechinger) Re: Ten Digit Dialing (Jill Arnson) Re: International Tariff d (Allyson Anthonisz) Re: New Motorola Micro-tac Elite AMPS Cellphone (Michael Berlant) Re: New Motorola Micro-tac Elite AMPS Cellphone (Steven King) Re: Caller ID and Call Waiting (Integral1@aol.com) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 500-677-1616 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: palm@tokyo.rockwell.com (Stephen Palm) Subject: North Pacific Cable Cut? Organization: Rockwell International Japan, JEDC Date: Thu, 9 Feb 1995 02:19:13 GMT We have 56kbps digital leased line between Tokyo and California that used the North Pacific Cable (NPC). Apparently NPC was cut on 2 Feb 1:00 AM JST (1 Feb 8:00 AM PST) and we are now on satellite backup. Does anybody have any more information? Does anyone know when they are planning to fix NPC? Thanks, Stephen [kiwin] Palm TEL (Voice mail): +81-3-5371-1564 Rockwell - Digital Communications Division COMNET: 930-1564 Japan Engineering Design Center (JST=PST+17hours) FAX: +81-3-5371-1507 palm@tokyo.rockwell.com s.palm@ieee.org spalm@cmu.edu palm@itu.ch ------------------------------ From: paulf@panic.Eng.Sun.COM (Paul Fronberg [CONTRACTOR]) Subject: SVNet Meeting February 15: Cellular Digital Packet Data Date: 9 Feb 1995 04:38:48 GMT Organization: Sun Microsystems Inc., Mountain View, CA SVNet Meeting: Wednesday, Feb 15, 1995, 7:30pm Mtn View (FREE, Open to Public) SVNet is a SF Bay area UNIX and Open Systems user's group which sponsors technical presentations at its monthly meetings. The meetings are free and open to the public. The next presentation will be: WHAT: Coming Soon to a Beach Near You??? Cellular Digital Packet Data (CDPD) Will we really be able to telecommute and surf the Net from our "branch" office on the beach in Tahiti? While Cellular Digital Packet Data may offer the next level of freedom from those pesky wires representing data and network connections, delays in equipment availability and geographic coverage are still a challenge to would-be service providers. On top of that, service providers are still deciding how to price the services. Tonight's speaker will give us the latest news about a variety of technical and standards/specifications issues on CDPD, including what functionality is currently being anticipated by the recently published Release 1.1 of the CDPD spec. TCP/IP services, the inclusion of a Hayes AT command set, etc. are among the items to be covered. WHO: Chuck Berman, McCaw Cellular WHEN: Wednesday, February 15, 1995 at 7:30 p.m. WHERE: Sun Microsystems Bldg 6, 2750 Coast Avenue, Mountain View Coast Ave appears to be just a driveway next to Bldg 5 on Garcia Ave between Amphitheatre Pkwy and San Antonio, so don't get confused. For more information, please call either Paul Fronberg at (415) 366-6403 or Ralph Barker at (408) 559-6202. SVNet is a UNIX and open systems user group supported by member dues and donations. SVNet Meetings are FREE and OPEN TO THE PUBLIC. UNIX is a registered trademark licensed solely by X/Open ------------------------------ From: cbrowne@usr.com (Christopher L. Browne) Subject: Rolm 6200/b CBX? Date: Wed, 08 Feb 95 11:51:34 PST Organization: USRobotics, Inc. I am looking for technical references or manuals for the Rolm 6200/b pbx. Are such documents available any where on the net? Christopher L. Browne cbrowne@usr.com USRobotics, Inc. cbrowne@interaccess.com Applications Engineering 72002.1027@compuserve.com ------------------------------ From: Tony_Pelliccio@brown.edu (Tony Pelliccio) Subject: Re: MCI Gave me a Deal Date: 8 Feb 1995 20:16:12 GMT Organization: Brown University -- Providence, Rhode Island USA In article , md@pstc3.pstc.brown.edu (Michael P. Deignan) wrote: > In my opinion, Sprint is the real winner now, with their penny-per-minute > promo. At least you know what you're paying and when the rate is applicable. > With the other two, its a percentage crap-shoot over some elusive "basic" > rate. I have to agree. I spend at LEAST $25.00 a month and with Sprint Sense get .10 a minute from 7PM-7AM weekdays and from 7PM Friday to 7AM Monday morning. So at that rate it comes to 250 minutes of talk time. If I'd spent that with AT&T's TrueUSA it came out to only 192 minutes. The best part was when the sleaze from MCI called me last night asking if I'd switch to their new Friend & Family II. Ha! My reply? "Send me a check for $75.00 and I'll think about it." I'm waiting to see how many people do this with my data line which makes NO long distance calls -- I should make a fortune off that one. Tony Pelliccio, KD1NR Box 1908, Prov, RI 02912 Tel. (401) 863-1880 Fax. (401) 863-2269 ------------------------------ From: llmeeks@aol.com (LLMeeks) Subject: Re: MCI Gave me a Deal Date: 8 Feb 1995 18:12:44 -0500 Organization: America Online, Inc. (1-800-827-6364) Reply-To: llmeeks@aol.com (LLMeeks) In article glen@cs.wisc.edu (Glen Ecklund) writes: > MCI called yesterday, and made me an offer I didn't want to refuse. > 50% off on all calls for six months. After that, 50% off on calls to > MCI customers (no list required) and 25% off (if I recall correctly) > to everyone else. Yes, MCI is offering 50% off all calls fro six months to NEW customers. After that it is 25% off all calls if the monthly bill is over $10, 30% if over $50. The 50% discount will only be to other MCI customers in your Friends & Family list. This is off the standard rates (generally just slightly less than AT&T's). It makes more sense than any other plan they have except for intralata calls in Texas. Other plans might make sense for that but are being grandfathered by the company. In comparing New F&F to True USA, the rate will always be less than AT&T, even without the 50% MCI to MCI discount. Lindsay Meeks ------------------------------ From: Anthony Chor Date: Wed, 8 Feb 95 16:40:30 PST Subject: Re: How I Fooled Caller ID In TELECOM Digest #78, 0006718446@mcimail.com (John Combs) writes (about ADSI): > Bellcore deserves praise for this well thought out service, laid out > in several Bellcore standards. Another smart move on their part is > that they didn't bother submitting the standard to an international > standards body to try to get it adopted. (We all know how long that > takes.) Instead, they have been visiting the PTTs of dozens of > countries, and trying to convince them to sign on to the ADSI standard > as defined by Bellcore. Several European nations have expressed > interest already, as have Pacific Rim nations, including China. > ...It is my opinion that ADSI, along with V.34 modems giving > true 115 kbps data throughput (via compression), could be an ISDN BRI > "killer" one-two punch...By the way, even though ADSI works on POTS lines, it > qualifies as PANS. (Pretty Amazing New Stuff.) ADSI is state-of-the-art technology -- for 1975. However, it is 1995, and Bellcore's low speed, asymmetrical protocol doesn't meet today's expectations for a multimedia information terminal. A little background: ADSI provides 1200 baud signalling to the CPE and a DTMF backchannel. So, ADSI is really slow sending info to the user, and the user can only signal back in DTMF. This is inherently limiting, as you might imagine. ADSI also defines presentation capabilities which allow the server to write text and options on the CPE screen. However, this capability is text-only. So, here we are on the brink of the Infobahn with cable companies and on-line services promising users a rich multimedia world replete with full motion video and CD quality sound and here's Bellcore offering 1200 baud text only services. OK, maybe the Infobahn stuff is a little way out, but ADSI adoption hasn't exactly been earth-shattering. By the time there is any appreciable penetration of ADSI phones (if ever), people will have truly state-of-the-art capabilities in their TVs and PCs. Meanwhile, the phones, phone companies, and telecom folks (us) will look dumb showing off ADSI stuff. Furthermore, we would then have a backward compatibility issue with these installed devices as we tried to move into some new technology. Therefore, we in the telecom industry should be pushing for a more modern voice/data solution than ADSI, one which will carry us into the next century. For instance, the Radish VoiceView protocol is a fully symmetrical switched voice/data solution which allows data (anything, not just text) to be carried at much higher speeds; the protocol also allows negotiation for fax (unlike ADSI). We should see VoiceView modems appearing later this year. Plus, digital simultaneous voice/data (DSVD) standards are coming soon (i.e. next year) which will allow high speed data connections plus voice on the same analog line. Finally, I'm not sure how v.34 and ADSI finish off ISDN. If I'm running v.34, I can't talk on the line. ADSI makes no provision for interrupting a data call with voice or a voice call with v.34 data, so these two things are unrelated. (Besides, I'd like to meet the person who gets 115kbps reliably over real phone lines using v.34.) (Other random thoughts: when the head of any RBOC talks about the Information Superhighway, none of them has ever mentioned ADSI as a key technology in making our future happen. If they don't believe in it, why should we? Something else to keep in mind: who will be the torch bearer for ADSI? Last I checked, Bellcore was for sale. Given the uncertainty of their future, I wouldn't count on them to propagate any standards.) Thus, ADSI is hardly new (technology wise) and not very amazing. Just say 'no' to ADSI. Tony Chor Program Manager Telecom Product Unit Microsoft Corporation ------------------------------ From: shawnlg@netcom.com (Shawn Gordhamer) Subject: Re: How I Fooled Caller ID Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Wed, 8 Feb 1995 19:31:34 GMT > [TELECOM Digest Editor's Note: Yes, you can put a resistor across the > line then attach a listening device behind that and listen all you want > without being detected. That's how phones are tapped. And, I suppose > you could send data, since as far as everyone else is concerned, your > phone is still on hook. But how would the person who is attempting to > spoof *your* display box know that you had such resistance on your line > unless he came to your house and put it there himself? Seems like a lot > of trouble to me. PAT] No, you would put a resister on your phone. Then, when you detected the first ring, you would send "fake" caller-ID data which would fool the callers box. Is this possible? Shawn Gordhamer shawnlg@netcom.com [TELECOM Digest Editor's Note: No it would not work since anything you do on your phone only applies as far as the central office. If it were possible for me to do something to *my* phone which influenced the behavior of *your* phone then lots of folks would add resistors or whatnot to their own lines to fool the exchange into thinking *you* had not answered, thus there should be no charge for the call, etc. Remember the book and movie a few years ago called 'Tandem Rush'? The sick phreak sits at home and dumps all this very high current on the phone line causing the phone on the *other end* to catch fire and/or electrocute the recipient ... yet it goes unnoticed in the central office ... balogna! Whatever hardwiring you do on your phone only influences the behavior of your phone(s) and line(s). Once the results of your handiwork reach the CO maze, that, as they say, is that. Notice I said nothing about audio tones, just hardwiring. Anyway, if you put this resistor in your phone, then the CO would think you were the one *not* off hook and would never extend dial tone to you. Or were you planning to switch it in and out of the circuit as appropriate? As soon as you switch it in (if off hook) the CO will think you disconnected. Won't work! PAT] ------------------------------ From: routers@halcyon.com Subject: Campus Wiring/Connectivity Innovation Date: 8 Feb 1995 05:22:28 GMT Organization: Northwest Nexus Inc. CAMPUS WIRING INNOVATIONS ------------------------- This information may be of interest to network services- voice and data network groups. I can provide information on how to change existing utp from a single voice circuit to 24 or 32 64Kb voice circuits up to 7 miles (11 km). Change existing utp to E-1 or T-1 for lan to lan connections up to 7 miles (11 km). Allow ethernet to be extended on existing 2 wire copper up to 3000 feet (990 m) at lOMbps. Also latest information on wireless lan bridges at 2Mbps for campus area networks. Works both inside with roaming range of 800ft(260m), and outside to remote locations up to 3 miles (5km). No FCC license required in North or South America. Includes SNMP management. For specific product information, please contact: Router Solutions 5527 Preston Fall City Road Fall City, Wash. 98024 USA 800-837-4180 (USA and Canada) 206-644-6082 (elsewhere) 206-222-7622 (FAX) routers@halcyon.com (Email) Or check our FTP site: ftp.halcyon.com /pub/local/routers ------------------------------ Date: Tue, 7 Feb 95 17:19:02 CST From: harold_hechinger@wiltel.com Subject: Re: Clock Slips Again When using DS1 circuits, a switch needs to be timed with the rest of the network. On the switches I have worked on, I designate which DS1s the switch should use for timing. Check where your PBX is receiving timing. Assuming your switch is clocking off of the DS1 like it should be, a second problem can come from having the clocking DS1 on SONET facilities. We have found that SONET DS1s have significant jitter, and can not be used for timing. We have gone so far as to require special facilities from the LEC to avoid SONET routing. With the T1 on SONET, your PBX may be unable to clock properly. Ask your telephone company how the T-1 is routed to the central office. You will need to convince the LEC to keep at least one DS1 off of SONET facilities, and program your PBX to use that DS1 for timing. I hope this will give you a few more ideas. Please give me a call or EMAIL if I can help you more. Harold Hechinger WILTEL 918-588-3404 ------------------------------ From: jilla@teal.csn.org (Jill Arnson) Subject: Re: Ten Digit Dialing Date: 8 Feb 1995 23:59:19 GMT Organization: Colorado SuperNet, Inc. In article , Terrence McArdle wrote: > Just for clarification's sake, I assume the phrase "local numbers that > are in a different phone number" means dialing a destination existing > in separate exchange, but the same area code, as the originator? > Calls that cross a LATA boundary currently require eleven digit > dialing, do they not? One other reason for the 10 (11) digit dialing is that the NPA and NXX in an area may be the same now that '0' and '1' are no longer required to be the middle digit of the NPA. So far it has been avoided mostly, but in the future it will not. If only seven digit dialing were used in this case, there is the possiblility that the switch will construe it as a misdialed number if only seven digits are dialed if it thinks the first three digits are an NPA. Granted the software can be designed to get around this, but well ... Jill C. Arnson Omnipoint Corporation Colorado Springs, Co (but Denver's where I hang my hat) jilla@csn.org [TELECOM Digest Editor's Note: Its not that the software can be designed around this -- it HAS been designed. Ever hear of timeouts? If you dial something which can be interpreted in a couple different ways depending on what digits follow, if any, the central office will sit there a few seconds following your last key press waiting for more. Lacking any further entry on your end, translation is started based on the context of what you did enter. For instance, you dial just zero for the operator. It is going to sit there a few more seconds waiting to see if you plan to continue dialing with 011, or 01, or 00, or 0+area code and number, all of which are valid combinations. To avoid timeouts and waiting, try dialing 0#. That 'pound sign' on the end functions as a carriage return. It means the dialing string is finished. Ditto with credit card calls to the number associated with the card; you only need to enter the four digits of the PIN. But the computer does not know what you are dialing, so it will sit there and wait to see if more digits are following. Terminate the PIN with # and watch how fast your call is processed. Anytime the number of digits to be entered is variable depending on context, use the # on the end to speed up the process in the same way you were told to do with international calls. Note that when you dial a seven or eleven digit number, adding # at the end does absolutely nothing to speed up the connection. PAT] ------------------------------ Date: 8 Feb 1995 15:50:55 +1000 From: Allyson Anthonisz Subject: Re: International tariff database providers I used to subscribe to T-Guide produced by Eurodata Foundation, which contains tariffs for mainly European countries with the exception of the USA, Canada, Japan and Hong Kong. I think they have a PC version of it called T-Calc 2 which I have not used. I also recently received a brochure on the LYNX Global Telecom Guide which contains tariff data for a wider range of countries and is available as a database. Contact details: Eurodata Foundation, Empire House, 175 Picadilly, London W1V 9DB Tel: 44-71-629 0774 Fax: 44-71-583 0516 Lynx Technologies Inc., 710 Route 46, Fairfield, N.J. 07004 Tel: 201-256 7200 Fax: 201-882 3583 Allyson Anthonisz Tel: 61-3-828-7376 Information Services Manager Fax: 61-3-820-3021 AUSTEL Library E-mail: ava@austel.gov.au 5 Queens Road Melbourne, 3004 Australia ------------------------------ From: lnjptyo1.mberla01@eds.com (Michael Berlant) Subject: Re: New Motorola Micro-tac Elite AMPS Cellphone Date: 9 Feb 1995 02:29:44 GMT Organization: EDS Japan In article , aj.knox@auckland.ac.nz (Andrew Knox) says: > Motorola New Zealand is apparently about to launch a new AMPS > cellphone called the Microtac Elite. The Elite was introduced in the USA about three months ago. It is smaller and lighter than the MicroTAC Ultra Lite, which was Motorola's previous lightweight champ. Aside from the electronic feature improvements, physical presentation is the big news for this model. Until now every last one of Motorola's "Flip Phones" was designed so that its accessories (batteries, cig adapters, car adapters, modem adapters, etc.) would interchange with any other Flip phone. As I understand it, the new Elite cannot share accessories with any other model of Motorola phone. This may present you with "new product accessory availability" problems which were not present, for example, when Motorola introduced the MicroTAC Ultra Lite a year and a half ago. ------------------------------ From: king@wildebeest.cig.mot.com (Steven King) Subject: Re: New Motorola Micro-tac Elite AMPS Cellphone Date: 8 Feb 1995 16:04:00 GMT Organization: Cellular Infrastructure Group, Motorola aj.knox@auckland.ac.nz (Andrew Knox) publicly declared: > Motorola New Zealand is apparently about to launch a new AMPS cellphone > called the Microtac Elite. > I would be quite interested to know whether anyone has any details > about this phone or about pricing of it throughout the world. The phone has more features than you can shake a stick at and is extremely light. I'd have purchased one instead of the MicroTAC Ultra-Lite I bought two days ago, if it weren't for the fact that street price in the U.S. is a little over US $1000. The street price on the Ultra-Lite is less than half that. (Of course, actual price depends on what kind of deal you can get with your service plan. With the plan I got, I received $150 off any phone in the store.) Please note that I work in the Infrastructure group at Moto, not the Subscriber group. I get all my information about these phones through the same retail channels as anyone else. Sorry, no inside dope for you. :-( Steven King -- Motorola Cellular Infrastructure Group ------------------------------ From: integral1@aol.com (Integral 1) Subject: Re: Caller ID and Call Waiting Date: 8 Feb 1995 18:05:21 -0500 Organization: America Online, Inc. (1-800-827-6364) Reply-To: integral1@aol.com (Integral 1) Ameritech now offers what they call "Access 24" in many areas of Detroit and suburbia, a service which offers Caller ID combined with Call Waiting. You must purchase a whole new phone to use this feature; Ameritech offers this phone for, I believe, a cost of around $250. The phone, produced by none other than Northern Telecom, features "soft keys" that can be pressed to instantly access other custom calling features; the screen will display Caller ID information of normal incoming calls and of calls that are waiting. This particular phone is supposed to also be compatible with future home banking and other electronic services. Scott Barnett Detroit, MI integral1@aol.com ------------------------------ End of TELECOM Digest V15 #87 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa18954; 9 Feb 95 17:21 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA16855; Thu, 9 Feb 95 10:56:28 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA16849; Thu, 9 Feb 95 10:56:25 CST Date: Thu, 9 Feb 95 10:56:25 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502091656.AA16849@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #88 TELECOM Digest Thu, 9 Feb 95 10:56:00 CST Volume 15 : Issue 88 Inside This Issue: Editor: Patrick A. Townson AT&T 500 Service and the Hospitality Industry (Darryl Kipps) Re: AT&T 500 Service (Marc A. Randolph) Re: Motorola Flip Phone and Low Battery (Patrick Wolfe) Re: Atlanta Toll-Free Calling Zone Growing? (Ed Goldgehn) Re: Directory Assistance Vendor Wanted (Ed Goldgehn) Re: The Philosophy of CallerID (Benjamin P. Carter) Re: North Pacific Cable Cut? (Floyd Davidson) Re: Ten Digit Dialing (Finn Stafsnes) Re: When Will PBXs Go Away? (chazworth@aol.com) Re: LD Termination Fees to RBOCs (Michael D. Sullivan) Re: CCITT Class A (Lars Poulsen) Cash For Telecom Experts Who Want to be Published (David Bezar) Information Sought on RF Data-Comm Chips (1/4 Mile Range) (Rob Mitchell) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 500-677-1616 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- Date: 09 Feb 95 03:25:57 EST From: Darryl Kipps <72623.456@compuserve.com> Subject: AT&T 500 Service and the Hospitality Industry As MIS director for a small chain of hotels, I am concerned about the increasing number of comments I'm seeing here regarding the inability to access 500 numbers from most PBX's. I take great pride in offering our guests the luxury of trouble-free communications away from home. I don't want to block these calls, but I'd like to make sure I have all the facts straight regarding who pays for the calls. If I understand correctly, I assume that if I were to call our Esteemed Moderator's 1-500-number at 4am I'd be greeted with a grumble and a click. :) From there I assume that a charge would appear on my telco bill by AT&T for a one minute call from VA to Chicago. At what rate am I being charged? (i.e. Basic Rate, Calling Card, Flat, etc. ?) Do I lose the benefit of any calling plans I subscribe to? Having been burned to some extent by each new calling scheme that's come down the pike in the last ten years, I'm a bit cautious, as I'm sure you understand, but I deplore the thought of a business traveller calling my (clueless) desk staff complaining that their 500 number can't be completed and the clerk responding with such infinite wisdom as "Huh?". (Although from what I've seen, some of AT&T's staff could fill those shoes!) Basically, I want to be able to provide the service without being taken to the cleaners. I presently block NO numbers going out of my PBX's. My CO provides blocking for 900 numbers and those nasty 800 pay-per-call deceptions. I then bill all remaining 1+ calls at a fixed markup from our actual fixed rate. But, as I command a .0935 flat rate from our carrier, (who is NOT AT&T) I'm afraid that I'll book a loss on 1-500 calls if I'm billed at calling card rates by AT&T! On a self-preservation note, I'd like to make it clear to anyone planning a pity party for me due to the widespread raping and pilfirage undertaken by most hotels with regard to telephone charges, I absolutely do not and will not gouge my guests to use my telephones. It has become quite commonplace in this industry to take whatever steps are necessary to recoup lost revenue due to increased competition and lower occupancy rates by increasing tele- phone charges. Every chain franchisor/operator out there has a national account with one LD carrier or another and NONE are paying more than .105/ minute for direct dialed, interstate calls. Flat rate, any time, anywhere. Most even have up to 50% off international calls. Yet, if you make a 1+ call from any one of thier rooms, you can expect to pay between $1 and $3 _per minute_ (!) for that call. So, as a result, most travellers are now using calling cards exclusively when on the road. Well, that really pissed 'em off. In retaliation, the AOS was born. These cut-throat upstarts intercept calling card traffic flowing out of hotels, lock 'em up in a Mitel SMT-1 Dialer box and shoot 'em through someone's basement in Idaho, re-route through who-knows where, mark up the charges to an astronomical rate, tack on some profit to kick back to the hotel, pause a few months for effect, then send billing data to the poor victim's telco. Three months after a trip, John Q. Customer has a $6 charge on his bill for a one minute call placed from a number he doesn't recognize, but barely remembers visiting the city. A call to the telco provides the number of the offending carrier. Another call puts you in direct conversation with a real live Auto Attendant with a menu longer than Denny's. If (and I stress IF) you reach a human (or at least their interpetation of such) you can expect all the warmth and understanding of an iceberg. Oh, dear, I'm ranting. Sorry. But you get my point. After all, I guess someone has to pay for those fresh lox and bagels on the complimentary (ha) continental breakfast spread. My point is that I don't condone these practices. The phones in my rooms are but another amenity I provide for my guests comfort just the same as clean sheets and hot water. Next thing you know they'll be putting water meters on each room ... (Stop him before he rants again!) At any rate, I'd appreciate billing procedures and rates for 1-500 service. I'm assuming that 0-500 numbers are always billed to either the callee or a calling card. Thanks for listening. [TELECOM Digest Editor's Note: Don't make too many assumptions. As 'they' say, when you assume something, it makes an ass out of 'u' and 'me'. One option under the 0-500 menu is 'to charge this call to the number you are calling from, press 1'. Now I think you can probably work around that with billed number screening; that is, the feature offered by most local telcos which forbids collect and third number billing. I am not sure. I think if you have billed number screening, then billing option 1 under 0-500 is not given; or it may be given but when the caller chooses it a response comes back that 'charges cannot be billed to this phone'. You will want to clarify this with your local telco. It is true in most cases that 0-500 works like any other zero plus call; you need to then use a calling card or call 'collect' (which in this case is done with a PIN). There is no option for third number billing. But make sure your telco can block that 'bill the call to the number you are calling from' option. This is not something to bother AT&T with; your local telco does all the billing. I know when using payphones, the option 'bill to the phone you are using' is not even given, so obviously they can tell the difference. On calls dialed 1-500 and billed direct (or dialed 0-500 if the guest slips it to you by pressing '1' in response to 'bill this call to the number you are calling from') you will be billed by AT&T at the rate of 25 cents per minute during peak and 15 cents per minute at night and on weekends/holidays. Peak is 8am to 5pm your time, Monday through Friday. You *will* be billed by AT&T on your local telco bill (in most places) and you will *not* be billed by whoever is your established carrier, nor at that carrier's rates. You will receive none of the benefits your carrier gives for discounts, etc. If you happen to be an AT&T customer, then the charges for 1-500 calls are counted toward any discounts for volume usage given by AT&T. It does not matter where in the USA you are, the rate is 25/15 cents per minute, even if you are next door. That much should be easy enough to program for. The catch is, if calls are being forwarded outside the USA, *then international rates apply*, billed to *whoever places the call*. In other words, you can't absolutely count on the 25/15 rate. Most always it will be, of course, and if the owner has his 500 number forwarded internationally then the caller will get a warning from AT&T 'this call is going to an international point and will be billed at international rates', but can you count on your guest in the hotel (or the user on your PBX or whatever) to tell you about this? You will get the charges for the international call. You will eat the charges for the international call unless you have recourse to the person who placed the call. So be careful of 1-500. You will almost always see the 25/15 per minute rate *but not always*. I would say since there is no easy way to discern whether a 500 call is going to terminate domestically or internationally, other than the verbal warning given to the caller by AT&T as the call is being set up, you'd be wise to set your rates accordingly. Mark up that 25/15 to something you are comfortable with for profit, assume (there we go again!) that for the immediate future 500 is mostly going to terminate in this country (at least until it gets very popular, if it ever does) and accept your occassional (hopefully very rare) losses on 500's which have been forwarded to the South Pole or wherever. There are intra-state exceptions to the 25/15 pricing; most states have gone along with it; check to see if your state has slightly different rates for in-state calls. Note to PBX admins: if you require your users to give a PIN as part of their long distance call, or you can identify the user based on the extension from which the call was placed, you have no problems. Just pass along the charges accordingly; mostly 25/15, occassionally something else. Now on 0-500 as noted above, if you have 'bill to this number' as an option removed, then the choices are bill to the caller's own credit card (not your problem) or call collect using a PIN (again, not your problem where the call terminates.) And yes Mr. Kipps, hotels have lately had the attitude that every single item in the house must be a profit center. I am surprised they don't charge guests to ride the elevator ... there is a few square feet of floor space not turning a profit! Many years ago when my friend Mrs. Brown was the resident manager of a hotel in Chicago, she explained about phone service. She said the switchboard never makes a profit; " ...in fact we lose a little on it, but you have to provide it ..." It was understood that it was a courtesy for guests. You made your money renting rooms, not selling phone service. She told me a funny story: she said she had an agreement with 'Kenwood Bell' (she was on the Chicago-Kenwood CO of Illinois Bell) which was that she did not sell phone service and they do not have rooms for rent ... . Hey, if business is that bad, start renting rooms by the hour ... oh, I guess you don't want that kind of a 'house' either. PAT] ------------------------------ From: mrand@eesun2.tamu.edu (Marc A Randolph) Subject: Re: AT&T 500 Service Date: 9 Feb 1995 07:14:15 GMT Organization: Dept. of Electrical Engineering, Texas A&M University > [TELECOM Digest Editor's Note: Well, you might check again. Very possibly > [...] > be busy). When I do 0-500-677-1616 and tell it to bill the call to the > phone I am using, it vanishes for a couple seconds and I get call-waiting, > then after four rings (call waiting or not) it interupts and a voice > message says it will try my alternate numbers. I did not bother with AT&T > voicemail; I have voicemail up the kazooey from a few other places I rarely > use. Anyway, feel free to call me at any reasonable hour: 500-677-1616. PAT] So now that you've been though it Pat, do you mind telling us the possible options/features of 500 service? It sounds like you can set up a hunt group, which I was not aware of. Will it do a hunt on no answer? And if you don't mind, how much is it (i.e. for different levels of options)? Marc Randolph mrand@tamu.edu -or- mar6019@tamu.edu PGP keyID: 4C95994D ...!{uunet,gatech}!tamu.edu!mrand [TELECOM Digest Editor's Note: You dial 0-500-your number and when requested, enter your master pin. You then get a menu which allows you to modify your 'reach list', turn on/off override (of your reach list), place a call to your home or override number, check voicemail, and do a few other things. In the reach list, you can give up to three numbers to try and reach you at. When someone calls your 500 number, it starts at the top of the list, working its way down until some one of the phones on the list is answered or it reaches the bottom of the list. For instance, your reach list can have your home number (abbreviated H# if desired when you enter it), your cellular number (abbreviated C# if desired) and perhaps your work number or voicemail. It starts at the top of the reach list and rings that phone the number of times you designate (default is four rings, but you can set it as desired). If no answer or busy, a voice comes on the line and says, "please hold, we will try to reach your party at another number." It then tries the second number on the list, and if necessary this repeats and the third number is attempted. You can have as many 500 calls simultaenously as you have terminating facilities. In other words if you have two lines at home set up in hunt, then you can have two 500 calls. If both those lines are busy a third 500 call would look on the reach list for the next place to try. I don't think there is any limit to the number of 500 calls that can be aimed at you at any one time other than whatever number of calls you (and the various places on your reach list) can handle at one time. You might have your 500 number point to your PBX (as the first number on your reach list) during the day. At night when your PBX does not answer, calls would go to the second number on your reach list, which is your office in another state which is open all night, etc. If your PBX can handle 20 incoming calls, then you can have 20 incoming 500 calls if desired. Maybe the third number on your reach list is someone who takes calls on weekends. By calling in with your master pin, you modify the reach list as desired anytime. If you want only one number on your reach list which you call in and change throughout the day as you travel around, that's okay also. Just scratch the other two. You can have up to three to be attempted if desired. If you are going to be at one place on a temporary basis and don't want to change your reach list, then a provision is made called 'override the reach list'. You enter a single number to *always* be used until you turn off this feature and tell it to go back to using the reach list again. So it truly can be a national number just like 800, but with more flexibility because you can require the caller to pay for it unless he has a pin, and you are not tied down to any one location as you are with many old-fashioned 800 numbers, although companies like 'My Line' and Arch Telecom have eliminated that problem. You can use your 500 number to make outcalls also and not have to bother with a calling card or calling collect. At the present time, you can only call your home number (H#) or your override number, but that will be changed later this year so you can call anywhere. Now with 'My Line' and Arch Telecom, you can presently use your 800 number for outcalls to anywhere. AT&T says 500 will eventually have that also. If desired, you can have what is known as 'Final Stop' with 500. This has to be either AT&T provided voicemail or voicemail from the vendor of your choosing. If all the numbers on your reach list are busy or do not answer, then calls go automatically to 'Final Stop'. If you wish, you can override the reach list and send calls to 'Final Stop' directly. If desired, call screening is also available. You can toggle options which allow only calls made with pin numbers to reach you, sending all other calls to Final Stop (voicemail). There is an option where calls deemed 'urgent' can get through the call screening while all other calls go to voicemail. You get recorded help at any time by pressing *H, and *0 will transfer you to the business office at any time for further assistance. Prices for the different options vary, and I do not have them all here. Right now everything is one dollar per month through April. For more information call them at 1-800-982-8480. PAT] ------------------------------ From: pwolfe@mcs.com (Patrick Wolfe) Subject: Re: Motorola Flip Phone and Low Battery Date: 8 Feb 1995 17:01:52 GMT Organization: MCSNet Services Erik P. Larson (larsone2@clunix.cl.msu.edu) wrote: > Motorola ... flip phone ... does anyone know how to disable the low > battery warning beep? It's really annoying ^^^^^^^^^^^^^^^^^^^^ I'll second you on that (is anyone from Motorola listening?). My phone has tons of controllable options, but not how many times or loud to make that damned beep. One thing that's interesting is that when I'm using the phone, it only beeps about four or five times (maybe one to two minutes) before the battery drains and the phone shuts off. When I'm not using the phone, it'll beep about once every minute for at least 15 minutes. My instructions for my xt-pak ni-cad batteries say to maintain long lifetime, I should discharge them fully before recharging (all the time, not just the first five times), so I've found I must stuff the phone under the couch cushions overnight so it won't wake me up. Maybe this is an opportunity for a third party product - a cell phone silencer (sound proof box), or a battery drainer (something that just puts a load on the battery until it drains completely). Patrick Wolfe (pwolfe@mcs.net) ------------------------------ From: edg@ocn.com (Ed Goldgehn) Subject: Re: Atlanta Toll-Free Calling Zone Growing? Date: 8 Feb 1995 18:57:03 GMT Organization: The INTERNET Connection, LLC In article , pbeker@netcom.com says... > I heard a very brief report on one of the local radio stations that > Southern Bell was planning to increase the size of the "local Atlanta > calling zone by 50%" by "adding 34 new exchanges" to it ... Thanks to the PUC, we got to vote on this about a year ago. The ballots were included in our telephone bills and was going to result in an increase on all residential and business telephone line costs. It passed. Now they are implementing the expansion of the calling area as well as splitting up 404 into two area codes in the same calling area (yes, this means you may need to dial another area code to get across the street). I don't remember what the new area code will be. Ed Goldgehn E-Mail: edg@ocn.com Sr. Vice President Voice: (404) 919-1561 Open Communication Networks, Inc. Fax: (404) 919-1568 ------------------------------ From: edg@ocn.com (Ed Goldgehn) Subject: Re: Directory Assistance Vendor Wanted Date: 8 Feb 1995 19:10:08 GMT Organization: The INTERNET Connection, LLC In article , sbauer@tyrell.net says: > I am looking for a vendor who can provide me with up to date Directory > Assistance data for the United States that can reside on a LAN and be > accessed by any user. I'm not sure if a CD-ROM that is updated > frequently is the way to go or an on line connection with a per > request charge. > We have about $3,000 per month in Directory Assistance charges. Contact DirectoryNet, Inc. in Atlanta about this. They have on-line connections to most telephone companies in the country and offer the type of service you are looking for. Their telephone number is (404) 512-5090. Ed Goldgehn E-Mail: edg@ocn.com Sr. Vice President Voice: (404) 919-1561 Open Communication Networks, Inc. Fax: (404) 919-1568 For more information about ISDN in general and our TURNKEY ISDN Solutions, send e-mail to isdn@ocn.com (There are humans at the end of this address). ------------------------------ From: bpc@netcom.com (Benjamin P. Carter) Subject: Re: The Philosophy of CallerID Organization: NETCOM On-line Communication Services (408 261-4700 guest) Date: Wed, 8 Feb 1995 23:26:25 GMT malcolm@interval.com (Malcolm Slaney) writes: > This article should be required reading for anybody who wants to enter > into the debate. > Caller ID and the Meaning of Privacy > Laurie Thomas Lee (Univ of Nebraska-Lincoln) Robert LaRose (Michigan > State) > The Information Society, Volume 1, pp 247-265, 1994. So anyone unable or unwilling to find this publication in a library is by definition too ignorant to discuss issues relating to caller ID? Can the material be accessed electronically? If not, then I submit that it should *NOT* be required reading. Ben Carter internet address: bpc@netcom.com [TELECOM Digest Editor's Note: Hey, chill out, Ben. 'Should be required reading' is a favorite phrase of book reviewers everywhere. It does not mean the Congress is going to pass a law sending you to prison if you don't read the book and still choose to postulate on the subject matter. Look at me. What do I know about anything, yet I talk all the time. PAT] ------------------------------ From: floyd@sanford.ims.alaska.edu (Floyd Davidson) Subject: Re: North Pacific Cable Cut? Date: 9 Feb 1995 06:51:10 GMT In article palm@tokyo.rockwell.com (Stephen Palm) writes: > We have 56kbps digital leased line between Tokyo and California that > used the North Pacific Cable (NPC). Apparently NPC was cut on 2 Feb > 1:00 AM JST (1 Feb 8:00 AM PST) and we are now on satellite backup. > Does anybody have any more information? Does anyone know when they > are planning to fix NPC? There appears to be a problem between the first and second repeaters, which would put it approximately 60 Km off the coast of Oregon. In addition to Asian traffic, the NPC has a spur to Alaska, and all traffic is currently using satellite re-route. I'll have a chance to check later tonight on the current status and if there is anything actually useful to anyone I'll try to post it in the morning. Considering the three previous occasions when the NPC has been out of service, expect 10-12 days for repair. Floyd floyd@ims.alaska.edu A guest on the Institute of Marine Science computer Salcha, Alaska system at the University of Alaska at Fairbanks. ------------------------------ From: Finn.Stafsnes@nta.no (Finn Stafsnes) Subject: Re: Ten Digit Dialing Organization: Norwegian Telecom Research Date: Thu, 9 Feb 95 11:11:35 GMT In article , etxlndh@eua.ericsson.se (Robert Lindh) writes: > I think Norway switched to seven-digit telephone numbers for all > calls, including "local" calls, approximately one year ago. Make it eight-digits. ... and in Denmark, a similar change was made some (five?) years ago. >> The reason given was something like "to prepare for new functions in >> the future". The main reason, as I have got it, was that the old numbering plan was beginning to run out of numbers for some areas. Finn Stafsnes ------------------------------ Date: Thu, 9 Feb 1995 08:49:05 -0500 From: Chazworth@aol.com Subject: Re: When Will PBXs Go Away? In article , writes: > What is the current thinking on when a PC (powerPC, whatever) replace > the PBX? i.e. when can I run my T1 from the telco with my voice trunks > on it into one card on a PC and have it route voice over the LAN to > other desktop computers that double as phones? It will probably be a > time curve: first available for small offices (ten users) on an ethernet, > then a while later available for 200 lines on a faster LAN, etc. What > says the net? My Mitel sx200 lite has a 68000 for a processor: it's a > MacPlus! Surely the cpu horsepower is available to replace lots of > dedicated TTL and switching hardware. I was just at a briefing from > Apple and they're working with the PBX makers for a Geoport Mac to be > a voice terminal behind a "big maker" PBX. But who are the startups > that are out to kill the PBX makers? The "startups out to kill" are the PBX makers themselves. NEC, Toshiba make computers now. Instead of the PBX going away, see it as yet another server on the LAN. I work with NEC systems involving about 50 trunks by 100 to 200 lines, (a small switch) It takes a lot of power to drive this thing, making analog sets ring, driving digital sets etc. I am also sure that the bandwidth on a LAN will ever increase to be able to handle the increased voice traffic, just as the PC will become more stable -- not needing the three fingered salute from time to time. The reported weakness of the PBX, the closed system approach also was a a foundation of its strength, amazing durability. Today the PBX is augmented by the computer (integrated messaging, authorization code database, ACD) and that forms a network of distributed -- not dedicated, processing. That is the powerhouse for communication networks, not the warm-fuzzy, shrinkwrapped software do everything in-a-box world of Harry Newton. ------------------------------ From: mds@access.digex.net (Michael D. Sullivan) Subject: Re: LD Termination Fees to RBOCs Date: 9 Feb 1995 00:32:32 -0500 Organization: Wilkinson, Barker, Knauer & Quinn (Washington, DC, USA) edg@ocn.com (Ed Goldgehn) writes: > In article , pturner@netcom.com says: >>> BTW, the method of charges is entirely different for LD service in the >>> cellular industry. With cellular, it is not unusual for local cellular >>> carriers (RBOC's or otherwise) to provide FREE or flat rate termination >>> charges to LD carriers. >> Why not, if they extend the T1s to your MTSO? It's that many less >> erlangs going out on the other (paid) trunks. I assume the B carriers >> probally must provide this for free or are limited to some max rate by >> Da Judge (that's Greene, not Ito :-)) No, Judge Greene doesn't have any jurisdiction over what the RBOCs charge for providing access. He does require them to provide equal access, however (see below). > Actually, it was a matter of marketing -- or necessity depending on > your point of view. The cellular industry needed to attract long > distance carriers to make connections to their networks in order to > sell their services. It didn't do much good to provide local > cellphone service without LD capability. But, the LD carriers weren't > going to make those connections on the same basis that they make their > existing LD access (by the connection and by time). So, since the > cellular industry needs the LD capability to sell its local calling > service, the fee structure was virtually eliminated. > I don't know which cellular carrier was first to do this (I would take > a guess that it was McCaw, but don't quote me on that). But, from > what I've heard, this practice is now widespread. I'm not sure who was the first to do it, but the first cellular carrier to file a tariff providing free access was U S WEST NewVector Group. Judge Greene got in a snit that USWNVG didn't have an equal access tariff, so it filed one with the FCC specifying $0 charge. The FCC staff wanted to reject it, but ultimately allowed it to go into effect. Michael D. Sullivan | INTERNET E-MAIL TO: mds@access.digex.net Bethesda, Md., USA | also avogadro@well.com, 74160.1134@compuserve.com ------------------------------ From: lars@spectrum.RNS.COM (Lars Poulsen) Subject: Re: CCITT Class A Date: 8 Feb 1995 22:33:54 -0800 Organization: Rockwell International - CMC Network Products In article rgu332@email.sps.mot.com (Jesus Ruelas) writes: > I read about the committee CCITT that is formed by 5 class groups, > they are class A, class B, ..., class E; and know that only the group > class A has the voting right while proposing a Standard specification. > Does anybody know why only this group has this kind of privileges?. The CCITT is a division of the ITU (International Telecommunications Union); it has recently been renamed ITU-TS (Technical Standards division). The ITU is a United Nations agency. That means only governments get to vote. Lars Poulsen Internet E-mail: lars@RNS.COM Rockwell Network Systems Phone: +1-805-562-3158 7402 Hollister Avenue Telefax: +1-805-968-8256 Santa Barbara, CA 93105 Internets: designed and built while you wait ------------------------------ From: dbezar@PrimeNet.Com (David Bezar) Subject: Cash For Telecom Experts Who Want to be Published Date: Wed, 8 Feb 1995 16:21:47 MST Organization: Primenet $$$$ Money $$$$ to be made and the bragging rights to being a published author. I am currently writting a book on Computer Telephony. There are dozens of chapters on different topics pertaining to the Telecommunications industry. I am looking for people who are interested in writting approximately a 20 pages including some diagrams on each of the following subjects: Wireless Communications Fax processing, Fax on demand, Fax broadcasting ISDN Communications International Communications Asynchronous Transfer Mode The Cable/Telecommunications Industry Video Conferencing / Distance Learning Microsoft's TAPI, Novell's TSAPI Telephony and the Internet If you are interested in obtaining more information about becoming a published author with one of the largest publishers in the world, and you are knowledgeable about one or more of these topics, write me back at: dbezar@primenet.com Please tell me which topic(s) you may be interested in / qualified for, along with a little information about yourself, and if possible, but not necessary a voice telephone number and a good time to reach you. If you are selected there is some money $$$$ to be made, but far more important is the fact that you could be published by a MAJOR publishing company. Details to be disclosed to those who respond. ------------------------------ From: robm@isgtec.com (Rob Mitchell) Subject: Information Sought on RF Data-Comm Chips/ (1/4 mile Range) Organization: ISG Technologies Inc. Date: Wed, 8 Feb 1995 20:05:58 -0500 This post's not as interesting as Dick Tracy, but ... ;) I am looking for product information about IC's which will allow me to transmit data using RF about a quarter mile or so. I'm looking for something with either an async, or possibly SDLC interface, to work with a micro-controller (TI 370 series). I'm also interested in board level products. Which companies participate in this field? Also, can anyone recommend any good, practical design guides covering this subject? What frequencies are 'best'. What bands are reserved? Types of antennae and driver circuits? Thanks in advance for the information! Rob Mitchell ------------------------------ End of TELECOM Digest V15 #88 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa19770; 9 Feb 95 17:53 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA19912; Thu, 9 Feb 95 12:09:29 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA19903; Thu, 9 Feb 95 12:09:25 CST Date: Thu, 9 Feb 95 12:09:25 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502091809.AA19903@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #89 TELECOM Digest Thu, 9 Feb 95 12:09:00 CST Volume 15 : Issue 89 Inside This Issue: Editor: Patrick A. Townson Re: Emergency Cellular Phone (Matthew Dukleth) Re: 28.8k bps Modem (James Carlson) Re: 28.8k bps Modem (Stephen Palm) Re: 28.8k bps Modem (John Combs) Re: 28.8k bps Modem (Ken Culbert) Re: 28.8k bps Modem (John Lundgren) Re: Chicago 630 Plan - Such As It Is (Kevin Kadow) Re: POCSAG to be Upgraded to APOC (Matthew Cheng) Re: Ten Digit Dialing (Carl Moore) Re: Unit to "Speak" CLID (Mike Roche) Re: Clock Slips Again (Martin McCormick) Looking for Hands on Networking Experience (Al Gharakhanian) Re: Who Belongs to 10732 Five-Digit Access Code? (Peter M. Weiss) Re: GTE PCS/Global Roam (John Mark) Re: Cellular Fraud: How Much of it is Real Money? (David Buerger) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 500-677-1616 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: mdukleth@ix.netcom.com (Matthew Dukleth) Subject: Re: Emergency Cellular Phone Date: 9 Feb 1995 17:50:51 GMT Organization: Netcom Yes, such a product is being developed. Here is the information I have: 1. Beta tests of the phone have been underway for about two months, and will be completed, sucessfully, soon. 2. Service is contemplated in about three months. 3. The phone will have alkaline batteries, and a cigarette adaptor, so it can be stored in a car glove box for an extended period of time, and still work. 4. And, the cost will probably not be zero, but will be very low compared to current cellular service. Also, the per minute charge will include long distance, as well as cellular airtime, for a fixed price -- to anywhere in the United States. If anyone would like more information, please contact either: Beth Walsh, The National Dispatch Center, bwalsh@ndcwireless.com Jack Nargundkar, The National Dispatch Center, jnargund@ndcwireless.com ------------------------------ From: carlson@xylogics.com (James Carlson) Subject: Re: 28.8k bps Modem Date: 9 Feb 1995 18:02:04 GMT Organization: Xylogics Incorporated Reply-To: carlson@xylogics.com In article , Paul Robinson writes: >> 1. Is the bps across the twisted pair wire actually running at 28.8 or >> 14.4 when 28.8 is invoked? Or is it just data compression? > The raw data rate for a modem will be from 110 to 28,800 baud (or > 14,400 baud) depending on what the other side agrees on. The rate > will be the lowest of whatever the two modems agree on. If you call up > a service that has only 14.4 modems, or 9600 baud modems, or even > 2400, you will only get 14.4 or 9600 or 2400 even though your modem > can do more. If both modems are 28.8 and both have their highest > speed enabled, you should see 28,800 baud before any compression > occurs. > The data is not sent at 28,800 bits per second, however. Typically > the modem will divide up the telephone line into six or more channels, > and run each channel at 2400 to 4800 bits per second. By multiplexing > six channels at 2400 baud, you get 14,400 baud, etc. One or two minor nits: the data are sent at 28,800 bits per second, but not at 28,800 baud. The difference is that a bit is a binary digit (a single one or zero) while a baud is a signal-element-per-second. The signal elements sent by the modem each represent several bits (actually, with 28.8Kbps, it's a variable amount), thus with about 3200 baud and 9 bits per baud you get 28,800. This is a synchronous data rate, so async framing conversion data and data compression run on top of this 28.8Kbps pipe. Unfortunately, too many sales and marketing folks have confused the bps versus baud issue, and the terms have lost much of their original meaning. The language is all the poorer for this. James Carlson Tel: +1 617 272 8140 Annex Software Support / Xylogics, Inc. +1 800 225 3317 53 Third Avenue / Burlington MA 01803-4491 Fax: +1 617 272 2618 ------------------------------ From: palm@tokyo.rockwell.com (Stephen [kiwin] PALM) Subject: Re: 28.8k bps Modem Organization: Rockwell International Japan, JEDC Date: Thu, 9 Feb 1995 12:20:03 GMT Steve Midgley wrote: > With sheepish apologies to the moderator and readers, I amend my > previous post. I must have sleeping sitting down :-) > V.32 is not the protocol spec for 14.4 modems. It's V.42. Apologies, apologies. Actually, you still have it wrong. V.32bis is where the 14.4kbps full duplex modulation is defined. V.42 is an error correction procedure (than can be used with several different modulations including V.32bis). Paul Robinson wrote: > The raw data rate for a modem will be from 110 to 28,800 baud (or > 14,400 baud) depending on what the other side agrees on. Actually, it would be 110 to 28,800 bits ber second. A V.34 28,800 modem can use one of 6 baud (or symbol) rates at a time: 2400, 2743, 2800, 3000, 3200, 3249 > The data is not sent at 28,800 bits per second, however. > Typically the modem will divide up the telephone line into six > or more channels, and run each channel at 2400 to 4800 bits per > second. By multiplexing six channels at 2400 baud, you get > 14,400 baud, etc. This is incorrect for V.34 (28,800) modems. A V.34 modem only uses a single "channel". During negotiation, the line is characterized by a process refered to as "line probing". Based on that information, one of the 6 symbol rates listed above is selected. To achieve multiple bits per baud, Trellis Coding is used. [stuff deleted... now discussing FAX] > There are two speeds for transmissions. First, when the connection is > being set up, each side will send an identifier sequence. I call it > the "answerback" after the similar sequence sent by a telex machine. > This identifier sequence is called a TTI or CSI. One of these will > typically appear in the log that the fax machine prints after 20-40 > transmissions indicating the identifying machine. The other is the > telephone number or other identifier that appears in the display > window. The two items may be different. This information is > transmitted by each machine at 300 baud, which is okay since it is > typically no more than 60 characters for each side. This 300 baud (which is also 300 bits per second in this case) modulation is the V.21 high channel. Several other pieces of information (such as machine capabilities, page width, etc) are also transfered in a protocol defined in T.30. > The sending machine then increases its speed and the transmission > takes place in the equivalent of "half duplex" mode, except that the > recipient machine typically acknowledges the end of each page and end > of transmission. Image transmission is done by V.17, V.29, or V.27ter which are all Half Duplex only modulations. > The ITU standard for fax machine transmissions supports 4800, 9600, > 12000, and 14400 baud, but typically a fax machine that does printing > will do 9600 tops, and can be downgraded to 4800 if line conditions > are bad. The bottom speed is 2400 bits per second for really crummy lines. > 12000 and 14400 are typically for fax modems in computers. But many expensive FAX machines support 14,400 (V.17) too. And you should see a lot more "cheaper" FAX machines supporting V.17 in the coming year. Regards, Stephen [kiwin] Palm TEL (Voice mail): +81-3-5371-1564 Rockwell - Digital Communications Division COMNET: 930-1564 Japan Engineering Design Center (JST=PST+17hours) FAX: +81-3-5371-1507 palm@tokyo.rockwell.com s.palm@ieee.org spalm@cmu.edu palm@itu.ch ------------------------------ Date: Wed, 8 Feb 1995 23:41:00 EST From: Testmark Laboratories <0006718446@mcimail.com> Subject: Re: 28.8kbps modem I connect to MCImail late at night via a 14.4kbps modem, with V.42bis compression, which is theoretically 4:1. I regularly get throughputs of 4200cps or better, which shows a compression ratio of 3:1. I recently saw a review of 28.8kbps modems in {InfoWorld}, and they saw true 4:1 bit compression on modems under "ideal" circumstances, i.e., very high- powered PCs, using V.34 modems with V.42bis compression on parallel ports, or on specially-buffered serial ports. This is not what occurs in the "real-world" because the local PC, or the host/main- frame, is often the slowdown, not the modems themselves. John Combs, Project Engineer, TestMark Laboratories, testmark@mcimail.com ------------------------------ Date: Thu, 09 Feb 1995 12:35:10 GMT From: ken@funk.com (Ken Culbert) Subject: Re: 28.8k bps Modem Organization: Funk Software, Inc. In article , tailored@netcom.com (Steve Midgley) wrote: > With sheepish apologies to the moderator and readers, I amend my > previous post. I must have sleeping sitting down :-) > V.32 is not the protocol spec for 14.4 modems. It's V.42. Apologies, > apologies. Wrong again. V.32bis is the modulation protocol spec for 14.4 kbaud; v.42 is the reliability spec; v.42bis is the compression standard; v.34 is the modulation protocol for 28.8 kbaud. Not too confusing, eh? ;) Ken Culbert ken@funk.com Funk Software, Inc. http://www.funk.com 222 Third Street voice: 617 497-6339 Cambridge, MA 02142 fax: 617 547-1031 ------------------------------ From: jlundgre@kn.PacBell.COM (John Lundgren) Subject: Re: 28.8k bps Modem Date: 9 Feb 1995 10:39:49 GMT Organization: Pacific Bell Knowledge Network David Sacerdote (DSacerdo@world.std.com) wrote: > If you purchased a modem which supports the v.34 standard AND are > using a computer to modem communications speed which is faster than > 28800bps it will actually travel across the wire at 28800bps, assuming > no line noise, no error correction, and no compression. I am also > assuming that you are connecting to another modem which supports the > V.34 standard, or whatever proprietary standard your modem supports. What is 'it' in 'it will travel..' above. I think that the above isn't telling much of the story. The link between modems may be at 28,800 BPS, but the bytes are being transmitted as octets, synchronously. They are not 10 bit asynchronous bytes as they are between the PC and modem. Also, there are other things done between the two modems, such as error detection and correction, and compression. So what is going on between the PC and modem has little relationship to what the modems are doing on the link. John Lundgren - Elec Tech - Info Tech Svcs Rancho Santiago Community College District 17th St. at Bristol \ Santa Ana, CA 92706 jlundgre@pop.rancho.cc.ca.us\jlundgre@kn.pacbell.com ------------------------------ From: kadokev@ripco.com (Kevin Kadow) Subject: Re: Chicago 630 Plan - Such As It Is Organization: Ripco Internet BBS, Chicago Date: Thu, 9 Feb 1995 08:08:31 GMT If they really are running out of numbers in the 708 area code, why not allow people and companies to voluntarily 'give up' their 708 numbers for their choice of 630 numbers? For example, businesses could release their DID lines, the 2nd ... Xth lines of hunt groups, or give up a 708 number for a 'vanity' number in in the new area code. This would at least have the effect of freeing up enough phone numbers that new residential lines could remain in the 708 code. kadokev@ripco.com Kevin Kadow FREE Usenet/Mail, inexpensive Internet - Ripco... Wearing white hats since 1983 Dialup:(312) 665-0065|Gopher:gopher.ripco.com|Telnet:foley.ripco.com ('info') ------------------------------ From: eemcheng@uxmail.ust.hk (Matthew M L CHENG) Subject: Re: POCSAG to be Upgraded to APOC Organization: Hong Kong University of Science and Technology Date: Thu, 9 Feb 1995 13:48:04 +0800 In article : > To everyone interested in POCSAG, and new more advanced terrestrial > paging systems for communications in tommorrow's world: > An overview of APOC, the upgrade to POCSAG, is now available by EMail. > If you are interested, please send a request to me (ukcbajr@ukpmr.cs. > philips.nl) stating the reasons for your interest. I would like the overview of APOC. I am now pursuing a research postgraduate degree in The Hong Kong University of Science and Technology in the area of wireless communications and so anything in this area such as paging, cellular radio and PCS is in my interest. However, I have tried the email address twice to request for the overview but all the emails are bounced back. Would the original author kindly send the overview to me by email? My email address is: eemcheng@ee.ust.hk. Thanks very much in advance. Matthew Cheng Wireless Communications Research Group HKUST ------------------------------ Date: Thu, 9 Feb 95 11:05:38 EST From: Carl Moore Subject: Re: Ten Digit Dialing Usually, the same three-digit combination has NOT been used as both a prefix and an area code (that one or a nearby one). Therefore, an area code given in a telephone number in, say, spoken form in an advertisement can be recognized by the listener as such. Such courtesy became "legal" in the Washington DC area (area codes 202,301,703) and along the 301/410 border in Maryland; in those places, local calls to another area code are published as NPA +7D (can omit the leading 1, but you may include it). Someone told me of having to use leading 1 on local call from Delaware County, PA (possibly 610-485) to Philadelphia. There are some exceptions to the above-stated use of area codes as prefixes: I believe it is 909 which is used as a prefix somewhere in southern California. And I sent a 312-630 prefix to the Digest recently. ------------------------------ From: mr@Tadpole.COM (Mike Roche) Subject: Re: Unit to "Speak" CLID Date: 9 Feb 1995 16:24:16 GMT Organization: Tadpole Technology, Inc. Austin, TX Reply-To: mr@Tadpole.COM Voice Powered Technology has a phone (Tel-It Phone I believe) which holds 40 recorded names. Each name can have up to three numbers (home, work etc). It will replay the recorded name between rings if the number received via CID matches one of the stored numbers. The recorded numbers can be dialed using voice recognition also (fair accuracy, names are divided into two groups of 20 which you have to tell it by pushing a button, up to two speakers with seperate memories for the voice recognition ... this doesn't mean you can store 80 "names".) Also has an Name and number CID with a one line LCD Display and call timer, on-hook dialing (NOT a speakerphone! only mike is in the handset). A good value IMHO at $129.95. I bought two and a friend got one after seeing mine. Available through Sharper Image etc. Also available direct although I've found VPT diffficult to deal with directly (bad delivery times and they initially quoted a higher price when it came out, terrible order line people, customer support poor and excellant in two calls. I own a Voice Organizer also.) I wanted the phones for the CID recital function. Nits: -Display bezel makes reading the upper edge of the display very difficult at most angles; -When the voice recognition feature is used, it will replay the recorded entry it thinks you said before dialing (good), but if it's wrong you have to hang up and retry (bad!!!). I wish it would recognize a spoken "NO" and "guess again" the way the Voice Organizer does. (Feedback for the VPT lurkers who I once promised some opinions to after they responded to an earlier post.) Mike mr@tadpole.com ------------------------------ From: Martin McCormick Subject: Re: Clock Slips Again Date: 8 Feb 1995 16:27:31 GMT Organization: Oklahoma State University Stillwater, OK In article dmac@trans.timeinc.com writes: > If you believe the clock slips are in the LEC's internal network > then attack it as a quality issue that they must resolve. Several people have suggested the method of using a modem with error-correction turned off to find clock slips. I have been trying this and determined that the problem is still there but is very small compared to what it has been in the past. The lines leading from the campus to Southwestern Bell are analog and there is some question about what they connect to after leaving the campus. There are definitely no T1's between here and there. What we will probably do is wait until we get another trunk that is really bad and keep it seized until it can be identified. This will make it easier to point it out to all concerned and maybe eventually lead to procedures to automatically watch for the problem before customers tell us about it. Many thanks to everybody who has sent past discussions of the problem or suggestions on how to identify or solve it. Martin McCormick WB5AGZ Stillwater, OK OSU Center for Computing and Information Services Data Communications Group ------------------------------ From: agak@ix.netcom.com (Al Gharakhanian) Subject: Looking For Hands on Networking Experience Date: 9 Feb 1995 10:52:08 GMT Organization: Netcom I have a significant amount of product development experience in the field of FDDI, ATM, SMDS, LAN and T1/T3 networking. I am looking for a way to gain some hands on network design and implementation experience in an IS or Systems Integration environment. I would be willing to dedicate a portion of my time (free of charge) to work toward this goal. Does anyone have any recommendation? Thanks. ------------------------------ Organization: Penn State University Date: Thu, 9 Feb 1995 10:42:14 EST From: Peter M. Weiss Subject: Re: Who Belongs to 10732 Five-Digit Access Code? 10-732 is also used for AT&T-customer' employee "deals" E.g. PSU has a True PSU (sm?) deal with AT&T. Similar but not the same as True USA (sm). The only time you need to dial 10-732 is when you want to call intra-LATA (from your home phone), otherwise it is your PIC. Billing is NOT handled by the LEC. Pete-Weiss@psu.edu ------------------------------ From: johnmark@tigger.jvnc.net (John Mark) Subject: Re: GTE PCS/Global Roam Organization: Third Millennium Industries Date: Wed, 8 Feb 1995 23:44:50 GMT CO/NY has already launched a similar service (January 1995). CO/NY customers get a SIM card (they call it a CellCard) for $49.99/year. They can then purchase or rent a GSM phone and can roam in 23 GSM countries. The agreement is with Vodaphone in the UK. Incoming calls must be routed through the customer's NY cellular number. The cost of roaming is a flat $2.49/minute for outgoing calls regardless of destination (local or international) and $2.49/minute + toll from NYC for incoming calls. ------------------------------ From: dbuerger@pipeline.com (David Buerger) Subject: Re: Cellular Fraud: How Much of it is Real Money? Date: 9 Feb 1995 09:11:01 -0500 Organization: The Pipeline TELECOM Digest Editor noted: >> Adam Gaffin correctly mentioned that AT&T's Bell Labs were connected to >> the network. >> Most amusing was Brayall's assertion that people should not have called >> that number since it was never listed or advertised. > [TELECOM Digest Editor's Note: I wonder where Adam has been lately? We > used to get some very nice articles from here here once in awhile, but not > for a long time now. PAT] Adam Gaffin is a reporter for {Network World}. I believe he's about to become more involved with reporting on the Internet. You can reach him at agaffin@world.std.com. David J. Buerger v: (404) 495-7494 dbuerger@pipeline.com f: (404) 495-7857 3455 Peachtree Industrial Blvd. Suite 271 Atlanta, GA 30136-2657 [TELECOM Digest Editor's Note: I wish he would stay in touch with us more often. His reports were always quite good. PAT] ------------------------------ End of TELECOM Digest V15 #89 ***************************** Received: from delta.eecs.nwu.edu by MINTAKA.LCS.MIT.EDU id aa21592; 9 Feb 95 20:20 EST Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA25589; Thu, 9 Feb 95 14:47:16 CST Return-Path: Received: by delta.eecs.nwu.edu (4.1/SMI-4.0-proxy) id AA25574; Thu, 9 Feb 95 14:47:09 CST Date: Thu, 9 Feb 95 14:47:09 CST From: telecom@delta.eecs.nwu.edu (TELECOM Digest (Patrick Townson)) Message-Id: <9502092047.AA25574@delta.eecs.nwu.edu> To: telecom@eecs.nwu.edu Subject: TELECOM Digest V15 #90 TELECOM Digest Thu, 9 Feb 95 14:47:00 CST Volume 15 : Issue 90 Inside This Issue: Editor: Patrick A. Townson Conference - "Business Opportunities in Asia-Pacific" (Spencer Hu) What is a Channel Bank? (William Wood) Books About Telecom Standards Wanted (Roman Rumian) Re: Cellular Telephones Built Into Watches (Ray Normandeau) Voice Traffic For ATM Switch (Arvinder Pal Singh Malhotra) Eleven-Digit Dialing For Local Calls (Benjamin L. Combee) Pre-Paid Phone Cards - Evening Rates? (Philip Winston) Re: Ten Digit Dialing (Brian Klippel) Re: Emergency Cellular Phone (Berton Corson) Re: Emergency Cellular Phone (Matthew J. Zukowski) Re: Cell Phone Programming - Follow-Up (John Levine) Re: MCI Strikes Again (Steven H. Lichter) Re: Stand-Alone Fax Box For PC (Steve Cogorno) Re: Video Dial Tone Information Wanted (Drew Smith) Re: Canadian (Northern Tel) in India? (John S. Nelson) IVR Systems Information Wanted (Jason Middleton) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and America On Line. It is also gatewayed to Usenet where it appears as the moderated newsgroup 'comp.dcom.telecom'. Subscriptions are available to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is edited, published and compilation-copyrighted by Patrick Townson of Skokie, Illinois USA. You can reach us by postal mail, fax or phone at: 9457-D Niles Center Road Skokie, IL USA 60076 Phone: 500-677-1616 Fax: 708-329-0572 ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. ************************************************************************* * TELECOM Digest is partially funded by a grant from the * * International Telecommunication Union (ITU) in Geneva, Switzerland * * under the aegis of its Telecom Information Exchange Services (TIES) * * project. Views expressed herein should not be construed as represent-* * ing views of the ITU. * ************************************************************************* Additionally, the Digest is funded by gifts from generous readers such as yourself who provide funding in amounts deemed appropriate. Your help is important and appreciated. A suggested donation of twenty dollars per year per reader is considered appropriate. See our address above. All opinions expressed herein are deemed to be those of the author. Any organizations listed are for identification purposes only and messages should not be considered any official expression by the organization. ---------------------------------------------------------------------- From: SPENCERHU@news-feed.delphi.com (SPENCERHU@DELPHI.COM) Subject: Conference - "Business Opportunities in Asia-Pacific" Date: 9 Feb 1995 10:51:53 -0500 Organization: Delphi Internet Services Corporation "Business Opportunities for the Information Industries in Asia/Pacific" ABSTRACT: As a result of worldwide enthusiasm towards the initiative of Information Superhighway in the US, information industries are now migrating to utilize multimedia and interactive technologies. A new domain of business overlapping the information and the entertainment industries are in formation. Meanwhile, fast economic growth in the Asia/Pacific has accelerated the growth of information industries, which has been utilizing new technologies for its own nature of applications. This conference will focus on articulating the nature of information industries in the US and Asia/Pacific, it will promote dialogues among large organizations, startups, and individuals. TIME: Saturday, March 11, 1995 PLACE: World Trade Center, Boston, MA, USA AGENDA: 8:00 - 9:00 Registration (at Auditorium) 9:00 - 9:40 Opening Remarks Dr. Shih-Chien Yang Mr. Sidney Topol (Chairman, Mass. Telecom Council) 9:40 - 9:50 Coffee Break 9:50 - 11:00 Session One: Information Business in Asia/Pacific This Session will focus on outlining specific nature of the information business in fast growing countries, on their needs and infrastructure projects. Analyses from financial institutions will be provided. Mr. TEO Ming Kean (Singapore) Mr. Tony Daza (World Bank) Marc Cabi (Cowen & Co) 11:00 - 12:10 Session Two: How to Conduct Information Business in Asis/Pacific Assessments and advices from corporations will be provided to enhance practical view on the international trade. Mr. Joseph Chou (Taiwan Telecom Network Service) Dr. Rau Chang (AT&T) Ian Davison (Loren International) 12:10 - 1:40 Lunch Keynote Speaker Dr. Henry Lee 1:40 - 2:40 Session Three: Leading Edge Technologies This Session will outline technologies of tomorrow by leaders of the fields. A. Enabling Technologies for Information Superhighway Prof. H T Kung (Harvard Univ.) B. Visual Communication and Its Products Dr. Wen Chen (Compression Labs) 2:40 - 2:50 Coffee Break 2:50 - 3:40 Session Four: Panel Discussion --- A. This Session will discuss market reaction to exporters from the US. A. On the Needs of Information Industries in Asia/ Pacific B. On Financing and Finance-seeking in Asia/Pacific C. "Hot Products" for Asia/Pacific, and Why? 3:40 - 4:30 Session Five: Panel Discussion --- B. This session will discuss the technology pipelines leading to the Asia/Pacific market D. On Technology Needs to achieve Breakthroughs for Information Industries E. On Problems brought by the Information Industries, e.g., Property Rights F. On "What's Exportable" to Asia/Pacific 1:30 - 5:30 (Run Concurrently) Product Show Compression Lab Commercial Div. TECO Supernetics MCI, AT&T Wang Labs 4:30 - 5:30 Social Hour FEE: Registration for the Conference and Product Show: Monte Jade Members $50; Non-Monte Jade Members $65 Students $40. Application Fee for the Product Show Monte Jade Members $160; Non-Monte Jade Members $200 Note: Lunch included in the fees above PLANNING COMMITTEE: New England Monte Jade Science & Technology Association PO Box 120090, Boston MA 02112-0090 Tel: 617-737-8272, Fax: 617-737-8275 ------------------------------ Date: Thu, 9 Feb 1995 09:04:54 -0800 From: wewood@ix.netcom.com (William Wood) Subject: What is a Channel Bank? In his response to what is a channel bank (Matthew P. Downs) wrote: > Not every one works on DLC's He is right. But, he seems to have chosen a narrow perspective on his answer because he referenced DLC's as though they were the only system with channel banks. Channel banks have been around since the 1930s under the name of carrier terminals. We started calling them banks in the early 60s when T type digital hardware began to be installed. Digital Loop Carriers (DLCs) come from many vendors and may use channel banks at the subscriber end (a.k.a. RT for Remote Terminal). At the central office or switch end, they may terminate in a channel bank (LT for Local Terminal) or be directly connected to a terminating card in the switch. Generally, a direct connect system is called an IDLC (Integrated Digital Loop Carrier). The switching folks often have never seen a channel bank on the subscriber (phone) side of the switch because so many SLCs (Subscriber Loop Carrier, of which DLCs are but one form) are directly connected. Even the interoffice (trunk) side can be integrated, so the use of individual chann